KB8PMY
/
tinySA
mirror of https://github.com/erikkaashoek/tinySA.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

All working!!!!!

Browse Source
Removed_REF_marker
erikkaashoek 5 years ago
parent 07370dff10
commit d7dd5f13e0
6 changed files with 182 additions and 93 deletions
Show Stats Download Patch File Download Diff File

7
nanovna.h
Unescape View File

@ -204,6 +204,7 @@ void set_RBW(uint32_t rbw_x10);
void set_drive(int d);
void set_IF(int f);
void set_IF2(int f);
void set_R(int f);
void set_step_delay(int t);
void set_offset_delay(int t);
void set_repeat(int);
@ -1020,4 +1021,10 @@ enum {
enum {
T_AUTO, T_NORMAL, T_SINGLE, T_DONE, T_UP, T_DOWN
};
// -------------------- Si4432.c ---------------
extern int SI4463_R;
void Si4463_set_refer(int ref);
/*EOF*/

10
radio_config_Si4468_200Hz.h
Unescape View File

@ -22,7 +22,7 @@
// Crys_freq(Hz): 26000000 Crys_tol(ppm): 1 IF_mode: 2 High_perf_Ch_Fil: 1 OSRtune: 0 Ch_Fil_Bw_AFC: 0 ANT_DIV: 0 PM_pattern: 0
// MOD_type: 2 Rsymb(sps): 400 Fdev(Hz): 1 RXBW(Hz): 200 Manchester: 0 AFC_en: 0 Rsymb_error: 0.0 Chip-Version: 2
// RF Freq.(MHz): 978 API_TC: 29 fhst: 250000 inputBW: 1 BERT: 1 RAW_dout: 0 D_source: 1 Hi_pfm_div: 1
// API_ARR_Det_en: 0 Fdev_error: 0 API_ETSI: 2
// API_ARR_Det_en: 0 Fdev_error: 0 API_ETSI: 0
//
// # RX IF frequency is -406250 Hz
// # WB filter 15 (BW = 0.23 kHz); NB-filter 15 (BW = 0.23 kHz)
@ -51,7 +51,7 @@
// Command: RF_GPIO_PIN_CFG
// Description: Configures the GPIO pins.
*/
#define RF_GPIO_PIN_CFG 0x13, 0x08, 0x08, 0x0A, 0x21, 0x00, 0x00, 0x00
#define RF_GPIO_PIN_CFG 0x13, 0x08, 0x08, 0x07, 0x21, 0x00, 0x00, 0x00
/*
// Set properties: RF_GLOBAL_XO_TUNE_1
@ -139,7 +139,7 @@
// MODEM_BCR_OSR_1 - RX BCR/Slicer oversampling rate (12-bit unsigned number).
// MODEM_BCR_OSR_0 - RX BCR/Slicer oversampling rate (12-bit unsigned number).
*/
#define RF_MODEM_TX_RAMP_DELAY_12 0x11, 0x20, 0x0C, 0x18, 0x01, 0x00, 0x0A, 0x03, 0xC0, 0x00, 0xB0, 0x10, 0x0C, 0xF9, 0x00, 0x44
#define RF_MODEM_TX_RAMP_DELAY_12 0x11, 0x20, 0x0C, 0x18, 0x01, 0x00, 0x08, 0x03, 0xC0, 0x00, 0xB0, 0x10, 0x0C, 0xE8, 0x00, 0x44
/*
// Set properties: RF_MODEM_BCR_NCO_OFFSET_2_12
@ -427,7 +427,7 @@
// Descriptions:
// GLOBAL_CLK_CFG - Clock configuration options.
*/
#define RF_GLOBAL_CLK_CFG_1 0x11, 0x00, 0x01, 0x01, 0x00
#define RF_GLOBAL_CLK_CFG_1 0x11, 0x00, 0x01, 0x01, 0x40
/*
// Set properties: RF_GLOBAL_CONFIG_1_1
@ -540,7 +540,7 @@
// MODEM_BCR_OSR_1 - RX BCR/Slicer oversampling rate (12-bit unsigned number).
// MODEM_BCR_OSR_0 - RX BCR/Slicer oversampling rate (12-bit unsigned number).
*/
#define RF_MODEM_TX_RAMP_DELAY_12_1 0x11, 0x20, 0x0C, 0x18, 0x01, 0x00, 0x0A, 0x03, 0xC0, 0x00, 0xF0, 0x10, 0x54, 0xF9, 0x00, 0x55
#define RF_MODEM_TX_RAMP_DELAY_12_1 0x11, 0x20, 0x0C, 0x18, 0x01, 0x00, 0x08, 0x03, 0xC0, 0x00, 0xF0, 0x10, 0x54, 0xE8, 0x00, 0x55
/*
// Set properties: RF_MODEM_BCR_NCO_OFFSET_2_12_1

2
radio_config_Si4468_short.h
Unescape View File

@ -4,7 +4,7 @@
#undef RF_MODEM_AGC_CONTROL_1
#define RF_MODEM_AGC_CONTROL_1 0x11, 0x20, 0x01, 0x35, 0x92 // Override AGC gain increase
#define RF_MODEM_AGC_CONTROL_1 0x11, 0x20, 0x01, 0x35, 0xF1 // Override AGC gain increase
#undef RADIO_CONFIGURATION_DATA_ARRAY
#define RADIO_CONFIGURATION_DATA_ARRAY { \

50
sa_core.c
Unescape View File

@ -237,6 +237,9 @@ void set_refer_output(int v)
setting.refer = v;
#ifdef __SI4432__
SI4432_SetReference(setting.refer);
#endif
#ifdef __SI4463__
Si4463_set_refer(setting.refer);
#endif
// dirty = true;
}
@ -392,6 +395,12 @@ void set_IF2(int f)
config_save();
}
void set_R(int f)
{
ADF4351_R_counter(f);
dirty = true;
}
#define POWER_STEP 0 // Should be 5 dB but appearently it is lower
#define POWER_OFFSET 15
#define SWITCH_ATTENUATION 30
@ -936,9 +945,10 @@ void calculate_step_delay(void)
#ifdef __SI4463__
if (actual_rbw_x10 >= 2700) { SI4432_step_delay = 400; SI4432_offset_delay = 100; }
else if (actual_rbw_x10 >= 800) { SI4432_step_delay = 500; SI4432_offset_delay = 100; }
else if (actual_rbw_x10 >= 250) { SI4432_step_delay = 1000; SI4432_offset_delay = 100; }
else if (actual_rbw_x10 >= 30) { SI4432_step_delay = 15000; SI4432_offset_delay = 100; }
else { SI4432_step_delay = 20000; SI4432_offset_delay =1600; }
else if (actual_rbw_x10 >= 100) { SI4432_step_delay = 700; SI4432_offset_delay = 100; }
else if (actual_rbw_x10 >= 30) { SI4432_step_delay = 800; SI4432_offset_delay = 100; }
else if (actual_rbw_x10 >= 10) { SI4432_step_delay = 3000; SI4432_offset_delay = 100; }
else { SI4432_step_delay = 12000; SI4432_offset_delay =1600; }
#endif
if (setting.step_delay_mode == SD_PRECISE) // In precise mode wait twice as long for RSSI to stabalize
SI4432_step_delay *= 2;
@ -1314,29 +1324,29 @@ void update_rbw(void) // calculate the actual_rbw and the vbwSteps (#
} else {
setting.vbw_x10 = 3000; // trick to get right default rbw in zero span mode
}
actual_rbw_x10 = setting.rbw_x10; // requested rbw
if (actual_rbw_x10 == 0) { // if auto rbw
uint32_t temp_actual_rbw_x10 = setting.rbw_x10; // requested rbw , 32 bit !!!!!!
if (temp_actual_rbw_x10 == 0) { // if auto rbw
if (setting.step_delay_mode==SD_FAST) { // if in fast scanning
if (setting.fast_speedup > 2)
actual_rbw_x10 = 6*setting.vbw_x10; // rbw is four the frequency step to ensure no gaps in coverage as there are some weird jumps
temp_actual_rbw_x10 = 6*setting.vbw_x10; // rbw is six times the frequency step to ensure no gaps in coverage as there are some weird jumps
else
actual_rbw_x10 = 4*setting.vbw_x10; // rbw is four the frequency step to ensure no gaps in coverage as there are some weird jumps
temp_actual_rbw_x10 = 4*setting.vbw_x10; // rbw is four times the frequency step to ensure no gaps in coverage as there are some weird jumps
} else
actual_rbw_x10 = 2*setting.vbw_x10; // rbw is twice the frequency step to ensure no gaps in coverage
temp_actual_rbw_x10 = 2*setting.vbw_x10; // rbw is twice the frequency step to ensure no gaps in coverage
}
#ifdef __SI4432__
if (actual_rbw_x10 < 26)
actual_rbw_x10 = 26;
if (actual_rbw_x10 > 6000)
actual_rbw_x10 = 6000;
if (temp_actual_rbw_x10 < 26)
temp_actual_rbw_x10 = 26;
if (temp_actual_rbw_x10 > 6000)
temp_actual_rbw_x10 = 6000;
#endif
#ifdef __SI4463__
if (actual_rbw_x10 < 1)
actual_rbw_x10 = 1;
if (actual_rbw_x10 > 8500)
actual_rbw_x10 = 8500;
if (temp_actual_rbw_x10 < 1)
temp_actual_rbw_x10 = 1;
if (temp_actual_rbw_x10 > 8500)
temp_actual_rbw_x10 = 8500;
#endif
actual_rbw_x10 = temp_actual_rbw_x10; // Now it fits in 16 bit
#ifdef __SI4432__
if (setting.spur_removal && actual_rbw_x10 > 3000)
@ -1345,8 +1355,8 @@ void update_rbw(void) // calculate the actual_rbw and the vbwSteps (#
actual_rbw_x10 = SI4432_SET_RBW(actual_rbw_x10); // see what rbw the SI4432 can realize
#endif
#ifdef __SI4463__
// if (setting.spur_removal && actual_rbw_x10 > 3000) // Will depend on BPF width <------------------ TODO -------------------------
// actual_rbw_x10 = 2500; // if spur suppression reduce max rbw to fit within BPF
if (setting.spur_removal && actual_rbw_x10 > 3000) // Will depend on BPF width <------------------ TODO -------------------------
actual_rbw_x10 = 3000; // if spur suppression reduce max rbw to fit within BPF
actual_rbw_x10 = SI4463_SET_RBW(actual_rbw_x10); // see what rbw the SI4432 can realize
#endif
if (setting.frequency_step > 0 && MODE_INPUT(setting.mode)) { // When doing frequency scanning in input mode
@ -1823,7 +1833,7 @@ modulation_again:
}
#endif
#ifdef __SI4463__
if (setting.mode == M_LOW || setting.mode == M_GENLOW)
if ((setting.mode == M_LOW || setting.mode == M_GENLOW ) && i == 0)
{
set_freq (SI4463_RX , local_IF);
}

130
si4432.c
Unescape View File

@ -953,9 +953,11 @@ void ADF4351_Setup(void)
// while(1) {
//
ADF4351_R_counter(2);
ADF4351_R_counter(3);
ADF4351_set_frequency(0,2000000000,0);
// ADF4351_set_frequency(1,150000000,0);
// ADF4351_Set(0);
// ADF4351_Set(1);
@ -1239,6 +1241,14 @@ void ADF4351_prep_frequency(int channel, unsigned long freq, int drive) // freq
int SI4463_frequency_changed = false;
static int SI4463_band = -1;
static int SI4463_outdiv = -1;
static uint32_t SI4463_prev_freq = 0;
float SI4463_step_size = 0;
uint8_t SI4463_channel = 0;
int SI4463_R = 5;
#define MIN_DELAY 2
#include <string.h>
@ -1441,6 +1451,7 @@ static const uint8_t SI4463_config[] = RADIO_CONFIGURATION_DATA_ARRAY;
//#undef RF_MODEM_AGC_CONTROL_1
//#define RF_MODEM_AGC_CONTROL_1 0x11, 0x20, 0x01, 0x35, 0x92 // Override AGC gain increase
#define RF_MODEM_AGC_CONTROL_1 0x11, 0x20, 0x01, 0x35, 0xE0 + 0x10
//#undef RF_MODEM_RSSI_JUMP_THRESH_4
//#define RF_MODEM_RSSI_JUMP_THRESH_4 0x11, 0x20, 0x04, 0x4B, 0x06, 0x09, 0x10, 0x45 // Increase RSSI reported value with 2.5dB
@ -1481,7 +1492,7 @@ void SI4463_start_rx(uint8_t CHANNEL)
};
retry:
SI4463_do_api(data, sizeof(data), NULL, 0);
my_microsecond_delay(SI4432_offset_delay);
// my_microsecond_delay(SI4432_offset_delay);
#if 0
// my_microsecond_delay(15000);
@ -1502,6 +1513,28 @@ void SI4463_clear_int_status()
}
void Si4463_set_refer(int ref)
{
if (ref >= 0) {
uint8_t data[8] = {
0x13, 0x08, 0x08, 0x07, 0x12, 0x00, 0x00, 0x00 // GPIO_PIN_CFG GPIO 0 input ,1 CTS, clock div out
};
SI4463_do_api(data, 8, NULL, 0);
uint8_t data2[5] = {
0x11, 0x00, 0x01, 0x01, 0x40 // GLOBAL_CLK_CFG Clock config
};
data2[4] |= ref<<3;
SI4463_do_api(data2, 5, NULL, 0);
} else {
uint8_t data[8] = {
0x13, 0x01, 0x08, 0x01, 0x12, 0x00, 0x00, 0x00 // GPIO_PIN_CFG GLOBAL_CLK_CFG GPIO 0,1 CTS, GPIO 2 clock div out
};
SI4463_do_api(data, 8, NULL, 0);
}
}
si446x_info_t SI4463_info;
void Si446x_getInfo(si446x_info_t* info)
@ -1959,17 +1992,17 @@ uint16_t SI4463_force_RBW(int f)
}
SI4463_clear_int_status();
retry:
SI4463_start_rx(0);
SI4463_start_rx(SI4463_channel);
my_microsecond_delay(15000);
si446x_state_t s = getState();
if (s != SI446X_STATE_RX) {
SI4463_start_rx(0);
my_microsecond_delay(1000000);
SI4463_start_rx(SI4463_channel);
osalThreadSleepMilliseconds(1000);
si446x_state_t s = getState();
if (s != SI446X_STATE_RX) {
ili9341_drawstring_7x13("Waiting for RX", 50, 200);
my_microsecond_delay(3000000);
osalThreadSleepMilliseconds(3000);
goto retry;
}
ili9341_drawstring_7x13("Waiting done ", 50, 200);
@ -1994,39 +2027,47 @@ static int prev_band = -1;
void SI4463_set_freq(uint32_t freq, uint32_t step_size)
{
int band = -1;
int outdiv;
uint32_t offs = ((freq / 1000)* 0) / 1000;
float RFout=(freq+offs)/1000000.0; // To MHz
if (RFout >= 822 && RFout <= 1140) { // till 1140MHz
band = 0;
outdiv = 4;
SI4463_band = 0;
SI4463_outdiv = 4;
#if 0 // band 4 does not function
} else if (RFout >= 568 && RFout <= 758 ) { // works till 758MHz
band = 4;
outdiv = 6;
SI4463_band = 4;
SI4463_outdiv = 6;
#endif
} else if (RFout >= 420 && RFout <= 568) { // works till 568MHz
band = 2;
outdiv = 8;
SI4463_band = 2;
SI4463_outdiv = 8;
} else if (RFout >= 329 && RFout <= 454) { // works till 454MHz
band = 1;
outdiv = 10;
SI4463_band = 1;
SI4463_outdiv = 10;
} else if (RFout >= 274 && RFout <= 339) { // to 339
band = 3;
outdiv = 12;
SI4463_band = 3;
SI4463_outdiv = 12;
} else if (RFout >= 136 && RFout <= 190){ // 136 { // To 190
band = 5;
outdiv = 24;
SI4463_band = 5;
SI4463_outdiv = 24;
}
if (band == -1)
if (SI4463_band == -1)
return;
int32_t R = (RFout * outdiv) / (Npresc ? 2*freq_xco : 4*freq_xco) - 1; // R between 0x00 and 0x7f (127)
int S = 4 ; // Aprox 100 Hz channels
SI4463_step_size = S * (Npresc ? 2000000*freq_xco : 4000000*freq_xco) / ((2<<18) * SI4463_outdiv);
if (freq < SI4463_prev_freq || freq > SI4463_prev_freq + 255 * SI4463_step_size ) {
SI4463_channel = 128;
SI4463_prev_freq = freq - SI4463_channel * SI4463_step_size;
RFout -= SI4463_channel * SI4463_step_size / 1000000.0; // shift for channel 128
int32_t R = (RFout * SI4463_outdiv) / (Npresc ? 2*freq_xco : 4*freq_xco) - 1; // R between 0x00 and 0x7f (127)
float MOD = 520251.0;
int32_t F = (((RFout * outdiv) / (Npresc ? 2*freq_xco : 4*freq_xco)) - R) * MOD;
int32_t F = (((RFout * SI4463_outdiv) / (Npresc ? 2*freq_xco : 4*freq_xco)) - R) * MOD;
int S = (int)(step_size / 14.305);
if (S == 0) S = 1;
setState(SI446X_STATE_READY);
my_microsecond_delay(100);
@ -2063,7 +2104,7 @@ void SI4463_set_freq(uint32_t freq, uint32_t step_size)
SI4463_do_api(data, sizeof(data), NULL, 0);
if (band != prev_band) {
if (SI4463_band != prev_band) {
/*
// Set properties: RF_MODEM_CLKGEN_BAND_1
// Number of properties: 1
@ -2076,27 +2117,46 @@ void SI4463_set_freq(uint32_t freq, uint32_t step_size)
// #define RF_MODEM_CLKGEN_BAND_1 0x11, 0x20, 0x01, 0x51, 0x0A
uint8_t data2[] = {
0x11, 0x20, 0x01, 0x51,
0x10 + (uint8_t)(band + (Npresc ? 0x08 : 0)) // 0x08 for high performance mode, 0x10 to skip recal
0x10 + (uint8_t)(SI4463_band + (Npresc ? 0x08 : 0)) // 0x08 for high performance mode, 0x10 to skip recal
};
SI4463_do_api(data2, sizeof(data2), NULL, 0);
my_microsecond_delay(30000);
prev_band = band;
prev_band = SI4463_band;
}
// SI4463_clear_int_status();
retry:
SI4463_start_rx(0);
SI4463_start_rx(SI4463_channel);
my_microsecond_delay(200);
si446x_state_t s = getState();
if (s != SI446X_STATE_RX) {
SI4463_start_rx(0);
my_microsecond_delay(1000000);
SI4463_start_rx(SI4463_channel);
osalThreadSleepMilliseconds(1000);
si446x_state_t s = getState();
if (s != SI446X_STATE_RX) {
my_microsecond_delay(3000000);
osalThreadSleepMilliseconds(3000);
goto retry;
}
}
} else
{
SI4463_channel = (freq - SI4463_prev_freq)/SI4463_step_size;
SI4463_start_rx(SI4463_channel);
/*
uint8_t data[] = {
0x36,
(uint8_t) R, // R data[4]
(uint8_t) ((F>>16) & 255), // F2,F1,F0 data[5] .. data[7]
(uint8_t) ((F>> 8) & 255), // F2,F1,F0 data[5] .. data[7]
(uint8_t) ((F ) & 255), // F2,F1,F0 data[5] .. data[7]
0x00,
0xFF
};
SI4463_do_api(data, sizeof(data), NULL, 0);
my_microsecond_delay(200);
*/
}
SI4463_frequency_changed = true;
}
@ -2158,12 +2218,12 @@ again:
Si446x_getInfo(&SI4463_info);
// s = getState();
// SI4463_clear_int_status();
SI4463_start_rx(0);
SI4463_start_rx(SI4463_channel);
my_microsecond_delay(15000);
s = getState();
if (s != SI446X_STATE_RX) {
ili9341_drawstring_7x13("Waiting for RX", 50, 200);
my_microsecond_delay(1000000);
osalThreadSleepMilliseconds(3000);
goto again;
}
ili9341_drawstring_7x13("Waiting ready ", 50, 200);

12
ui_sa.c
Unescape View File

@ -408,6 +408,7 @@ enum {
KM_ACTUALPOWER, KM_IF, KM_SAMPLETIME, KM_DRIVE, KM_LOWOUTLEVEL, KM_DECAY, KM_NOISE,
KM_10MHZ, KM_REPEAT, KM_OFFSET, KM_TRIGGER, KM_LEVELSWEEP, KM_SWEEP_TIME, KM_OFFSET_DELAY,
KM_FAST_SPEEDUP, KM_GRIDLINES, KM_MARKER, KM_MODULATION,KM_COR_AM,KM_COR_WFM, KM_COR_NFM, KM_IF2,
KM_R,
KM_NONE // always at enum end
};
@ -445,8 +446,10 @@ static const struct {
{keypads_plusmin , "COR\nWFM"}, // KM_COR_WFM
{keypads_plusmin , "COR\nNFM"}, // KM_COR_NFM
{keypads_freq , "IF2"}, // KM_IF2
{keypads_positive , "R"}, // KM_R
};
// ===[MENU CALLBACKS]=========================================================
static const menuitem_t menu_lowoutputmode[];
static const menuitem_t menu_highoutputmode[];
@ -1645,6 +1648,7 @@ static const menuitem_t menu_settings3[] =
{ MT_KEYPAD, KM_COR_WFM, "COR\nWFM", "Enter WFM modulation correction"},
{ MT_KEYPAD, KM_COR_NFM, "COR\nNFM", "Enter NFM modulation correction"},
{ MT_KEYPAD | MT_LOW, KM_IF2, "IF2 FREQ", "Set to zero for no IF2"},
{ MT_KEYPAD, KM_R, "R", "Set R"},
#ifdef __HAM_BAND__
{ MT_ADV_CALLBACK, 0, "HAM\nBANDS", menu_settings_ham_bands},
@ -1978,6 +1982,10 @@ static void fetch_numeric_target(void)
uistat.value = config.frequency_IF2;
plot_printf(uistat.text, sizeof uistat.text, "%3.3fMHz", uistat.value / 1000000.0);
break;
case KM_R:
uistat.value = SI4463_R;
plot_printf(uistat.text, sizeof uistat.text, "%3d", uistat.value);
break;
case KM_SAMPLETIME:
uistat.value = setting.step_delay;
plot_printf(uistat.text, sizeof uistat.text, "%3dus", ((int32_t)uistat.value));
@ -2099,6 +2107,10 @@ set_numeric_value(void)
break;
case KM_IF2:
set_IF2(uistat.value);
// config_save();
break;
case KM_R:
set_R(uistat.value);
// config_save();
break;
case KM_SAMPLETIME:

Write Preview
Loading…
Cancel
Save

Powered by TurnKey Linux.