The channel long-press sheet's binary Mute/Unmute tile becomes a
Notifications tile showing the current level, opening a picker with All
messages / Mentions only / Off.
The mode is read and written against the channel's PSK identity via
AppSettings.channelNotifyKey, so it survives a rename and does not follow a
reused slot (#259). Plain ListTiles with a check mark are used rather than
RadioListTile to stay clear of the Radio groupValue deprecation.
Adds channels_notifications / channels_notifyAll / channels_notifyMentionsOnly
/ channels_notifyOff to app_en.arb and regenerates l10n; the other 17 locales
fall back to English and are recorded in untranslated.json.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
_maybeNotifyChannelMessage now switches on ChannelNotifyMode instead of the
binary isChannelMuted check. mentionsOnly notifies only when the message
carries a canonical @[selfName] mention.
The mode is keyed by the channel's PSK identity, reusing the same
_findChannelByIndex(index)?.pskHex resolver the message store already uses
for history (#194), so the setting survives a rename and does not follow a
reused slot.
The mention is matched against resolvedText (post-translation) so a
translated mention still fires, and case-insensitively since a hand-typed
mention need not match the advert casing. Bare @Name is deliberately not
matched: it false-positives on ordinary text and cannot be delimited for
names containing spaces.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds ChannelNotifyMode { all, mentionsOnly, off } and a channelNotifyModes
map keyed by PSK identity via AppSettings.channelNotifyKey, mirroring the
psk_ marker scheme ChannelMessageStore uses for history (#194). Keying by
PSK rather than display name means the setting survives a channel rename
and does not bleed across a slot reassignment (#193).
Legacy muted_channels stays readable and keeps being written:
AppSettingsService.channelNotifyMode falls back to it by name so a channel
muted before this feature still reports off, and setChannelNotifyMode keeps
it in sync so rolling back to a build without notify modes still honours an
Off channel. Name cannot be resolved to a PSK at the data layer, so the
migration is a read-through fallback rather than an upfront pass.
The notification gate and Channels UI still use the legacy isChannelMuted
path; #261 and #262 switch them over.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Guard _sendMessageDirect too (automatic retries route there without
passing sendMessage, so a pre-block message kept retrying post-block),
log both connector drops instead of returning silently, and surface a
blocked-contact snackbar on the manual retry and reaction paths.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adversarial review flagged that the composer swap is UX-only: retry-tap
and reaction sends call connector.sendMessage directly, bypassing the
hidden composer. Add a block guard at sendMessage (covers normal DMs,
reactions, and retries), mirroring the incoming DM-drop so a block is
symmetric. The composer notice bar remains the visible affordance.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the DM composer with an "Unblock to message" notice bar when
the contact is blocked, so a block also stops outgoing DMs (previously
only incoming DMs/adverts were suppressed). Inline unblock restores the
composer. Adds block_composerNotice l10n string and documents the
outgoing-DM rule in block-contract-as-built.md §4.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DTR low→high pulse in the desktop USB open path resets ESP32 USB-Serial/JTAG
chips (VID 303A: C6/H2/S3-HWCDC) into ROM download mode mid-handshake, wedging
the device until a physical reset. The pulse exists for nRF52 (VID 239A)
reconnect-after-unclean-disconnect, so it can't just be removed.
connect() now recovers the port's USB VID from the flserial enumeration
(hardware_id) and gates the pulse: 239A keeps the DTR low→high pulse; 303A and
any unknown/unparseable VID open with DTR asserted and no pulse. VID lookup is
enumeration-only (never opens the port). New usb_vid helper parses both flserial
hardware_id formats (Windows VID_XXXX and macOS/Linux VID:PID=xxxx:xxxx), unit
tested. Build of epic #245.
Settings showed the self public key truncated to 16 hex chars + "..." as
plain Text (settings_screen:262/:410), so it couldn't be shared. Show the
full key, make it selectable, and add a copy button beside it.
- _buildInfoRow gains an optional copyValue: renders the value as
SelectableText + a copy IconButton that copies the full key and shows a
"Public key copied" snackbar. Both self-pubkey rows pass the full key.
- New l10n string settings_publicKeyCopied (regenerated localizations +
untranslated.json).
Part of #234.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The autocomplete only completed an unambiguous emoji on Enter; ambiguous
queries (e.g. `:shrug` with multiple matches) sent the literal text instead of
the highlighted glyph, and mentions only selected via Tab. Enter now accepts
the highlighted item (emoji or mention) like Tab, then sends; Tab still selects
without sending, Esc dismisses to send literal text. Removes the now-dead
_emojiQuery field. (#231, emoji + mentions per Ben)
Widget tests: Enter inserts the highlighted emoji (ambiguous `:shr`) and the
highlighted mention (`@Bo` -> @[Bob]).
Part of #231.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A reply prepends `@[Name] `, so a reply-gif renders the gif (prior commit);
this adds the `@Name` reply chip above it so it is clear the gif is a reply.
Extracts TranslatedMessageContent.mentionChip + leadingReplyName (shared by
inline rendering and the reply-gif header); the channel bubble builder renders
the chip above the GifMessage. DMs have no reply feature, so channel-only.
Part of #232.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two shared-root render gaps (message tokens were only matched at fixed
positions):
- TranslatedMessageContent: parse @[Name] anywhere (leading, inline, or
repeated) and render each as a chip; messages without a mention keep full
link support (#233).
- GifHelper.parseGif: strip a leading `@[Name] ` reply prefix before matching
so a reply-with-gif resolves to the gif instead of literal text; arbitrary
text before a gif is still left as text (#232).
Tests: parseGif reply/format cases + widget tests for inline/leading/multiple
mention chips. Full suite 402 green.
Part of #233, #232.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Race (data loss): exclude keys the user block/unblocked WHILE a BLOCK_LIST dump
was in flight from the union (they were already pushed + local is authoritative)
-> no re-import of an unblock, no redundant re-push.
- _pubKeyHexToBytes returns null on malformed hex (try/catch + length) so a corrupt
persisted key can't crash the unawaited push.
- Cancel _blockListRetryTimer + reset dump state on disconnect (timer leak).
Justified/not-fixed: generic [0x01][0x06] error is unreachable (we only build
well-formed 32-byte frames); Completer-correlation is out of scope for v1.
Epic B #166 / #179#180. Gemini audit: docs/llm-consultations/2026-07-14-epicAB-*.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Connector parses ADD/REMOVE/CLEAR replies; ADD ok=0 (node store full at 32) sets
blockOffloadStoreFull (local stays authoritative), cleared on reconcile. BlockedView
shows a firmware-offload status row when supportsOffbandBlock — 'active', or a
'radio block list full' warning. Adds block_offload* l10n.
Epic B #166 / B5 #180.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
BlockService gains a firmwareSync sink (fired on real block/unblock/promote) and
importKeys (pull side, no echo). Connector sets the sink in initialize, pushes
ADD/REMOVE via 0xC2 when supportsOffbandBlock, and on device-info (caps landed)
pulls BLOCK_LIST. On dump completion: UNION — import node keys missing locally
(no echo), push local keys the node lacks; never remove (only explicit unblock
sends REMOVE). Non-Offband radios skip all of it (app-local only).
Epic B #166 / B4 #179.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Route 0xC2 frames in _handleFrame; accumulate the LIST dump (START 0xFF count ->
KEY index+key:32 -> END 0xFE). Detect truncation (count vs received; APP_START
early-END uses the same 0xFE) and re-request on a 2s settle. Never derive
removals from a partial pull. Union reconcile wired in B4.
Epic B #166 / B3 #178.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Build frames for ADD/REMOVE (pubkey:32) / LIST / CLEAR; parse the 3-byte
[0xC2][sub][ok] reply (OffbandBlockReply). Generic error frame is [1][6]
(respCodeErr/errCodeIllegalArg), NOT 0xC2-prefixed. LIST streamed dump parsed
in B3.
Epic B #166 / B2 #177.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-len byte packs a hash-mode hint in the high 2 bits and the
path byte-length in the low 6. Contact.fromFrame stored it raw, so a direct
node at 2-byte mode (0x40) read as pathLength 64: "64 hops" in the UI, a ~195s
ACK timeout, and up to 64 junk bytes pulled into contact.path that broke
repeater status/telemetry/neighbors until the path was cleared (#222).
- contact.dart: decode via pathHopCount (& 0x3F); keep 0xFF as the flood
sentinel; use the decoded length for safePathLen so path bytes stay clean.
- chat_screen _currentPathLabel: show realHopCount(pathLength, pathHashByteWidth)
so 2/3-byte nodes read the correct hop count; 0 -> Direct.
- Regression test for 0x40/0x00/0x03/0x44/0xFF; updated two model_changes tests
that codified the old raw mapping.
Part of #222 (stays open for on-hardware validation by the reporter).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gemini review (HIGH): add !mounted guard after the async block/blockName before
showing the snackbar. Captured messenger already made it safe, but this hardens
against showing on a popped route. (MEDIUM 'stale itemBuilder read' assessed as a
false positive: context.read in itemBuilder returns live state at menu-open.)
Epic A #165 / A5 #172.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
BlockService.maybePromote(name,key): when a name-only block links to a pubkey,
add the key to blockedKeys and drop the name entry. Connector calls it on every
contact advert AND incoming DM (the two ways we learn a name<->key link).
_pruneExpiredNames on load drops name-only blocks older than 30 days.
Epic A #165 / A7 #174. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New BlockedView pane (Settings category, after Privacy): lists blocked pubkeys
(contact name when resolvable, else short key) and name-only channel blocks, each
with Unblock; empty state when nothing blocked. App-local; firmware-offload
indicator deferred to Epic B. Adds block_* settings l10n.
Epic A #165 / A6 #173. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Completes the A5 entry points: contact long-press sheet, DM app-bar overflow, and
discovery item sheet each get a Block/Unblock toggle (by pubkey, reflecting current
state). Pairs with the channel 'Block sender' from 8a2e764.
Epic A #165 / A5 #172. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Long-press a channel post -> Block sender: resolve the claimed name to known
pubkey(s) and block each (full block across DM+adverts+all channels, multi-device
covered); if unresolved, block the name globally across ALL channels (promotes to
pubkey later, #174). Adds block_* l10n strings. A5 channel surface;
contacts/chat/discovery + unblock still to come.
Epic A #165 / A5 #172. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Connector: resolveContactKeysByName(name) maps an anonymous channel sender
(name-only) to matching contact/discovered pubkeys (self-heals via adverts
keeping contact names current).
- channel_chat_screen: hide a post only when the name resolves and EVERY
matching pubkey is blocked (ambiguous namesake with any unblocked match still
shown), or the name is in blockedNames. View-layer filter only.
Epic A #165 / A3 #170. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Connector: BlockService injected via initialize(); incoming DM from a blocked
key dropped (no thread/unread/notify), advert notifications gated at all 3
sites (advert still processed for name self-heal). App-push-layer only.
- Contacts + Discovery: blocked entries stay VISIBLE with a red block icon
(BlockedBadge) + strikethrough/muted name (not hidden).
- New lib/widgets/blocked_badge.dart.
Epic A #165 / A2 #169. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
App-global (NOT per-device) block list, source of truth for the client:
- BlockStore persists blockedKeys (pubkey hex) + blockedNames (name->first-seen
epoch, for A7 promote-and-prune) via PrefsManager, global keys.
- BlockService (ChangeNotifier): isBlocked/isNameBlocked/block/unblock/
blockName/unblockName + unmodifiable accessors.
- Wired into main.dart MultiProvider.
Epic A #165 / A1 #168. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror every queue-drain decision -- requested, deferred (which guard),
asking radio, message received, no-more, timeout/give-up, post-channel
proactive fire -- into the App Debug Log via _logQueueSync, so a missed or
stuck drain on reconnect is diagnosable from the device.
Diagnostic only; the targeted fix follows once the log shows the failure.
Refs #51
Per meshcore-firmware/docs/trace-path-format.md: a TRACE route must exclude
the origin (implicit at both ends). If route[0] is our own node's prefix it
matches no forwarding node (we are the sender) -> the packet never advances
-> RESP_CODE_SENT then a silent timeout (the doc's #1, most-common cause).
buildPath now drops a leading self hop before assembling the round trip.
Bumps build to +51 for the b51 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
App Debug Log showed every failing trace sending an empty path ->
"Firmware responded with error code: 1". Cause: repeaters with a flood
route (path stored as all-zeros) were treated as routed; buildPath
collapsed the all-zero path to empty; the firmware rejects an empty trace.
- buildPath: an empty OR all-zero path now traces the target's own width
prefix (never returns an empty payload).
- _doPathTrace: guard - never send an empty path; surface "not available".
- Repeater menu: constant "Path Trace" label (no more Ping/Path-Trace
flip-flop); a flood path (all-zero) counts as no route -> direct ping.
Bumps build to +50 for the b50 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The map "Current path" panel joined _pathTrace byte-by-byte, so once the
builder started capturing the full configured-width prefix per tap (#150),
a single 2-byte node read as "84,f4" — looking like two hops. Format via
PathHelper.formatPathHex at the configured width so it reads "84F4".
Bumps build to +49 for the b49 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The repeater contact menu hardcoded "Ping" and always sent a target-only
(direct) trace, so a multi-hop repeater offered a "Ping" that could never
return. Mirror the room behavior: a repeater with a known route is
labelled "Path Trace" and traced along that route (round-trip); only a
direct neighbour (no path) shows "Ping" and pings directly.
Bumps build to +48 for the b48 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The trace was width-1 end to end (flags=0, a 1-byte path, and a
1-byte-per-hop parse + render), so on a 2-/3-byte path-hash mesh it
returned 1-byte hops (`6A`, not `6Axx`) and failed to route where a
1-byte prefix is ambiguous ("Path trace not available").
- Send: path_sz = floor(log2(width)); build width-byte hops — the
repeater/room "Ping" prefixes (contacts_screen), the round-trip
buildPath (now mirrors by hop, not byte), and the map trace builder.
- Parse: read the flag byte for the hop width, group the hash bytes into
packed width-byte hops, key contacts by the full prefix, 1 SNR per hop.
- Render: list panel + markers + map points iterate packed hops, labelled
at the configured width.
PathHelper gains tracePathSz / traceHopBytes / packPrefix / tracePathHops
/ buildTraceRoundTrip, all unit-tested (incl. width-2 hop mirroring).
Bumps build to +47 for the b47 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gemini review flagged setPublicKeyHex using `value.length > 10`, which would
store an empty scope for an exactly-10-char device key (unreachable today —
MeshCore public keys are 64 hex — but inconsistent with ChannelStore, which
uses >=10). Align to >=10 for consistency and to remove the latent off-by-one.
Channel message history was persisted keyed by the reusable slot index, so a
channel added to a slot that once held another channel inherited its messages.
Storage now keys by the channel's PSK identity via a resolver on the store
(index -> channel PSK), leaving all call sites unchanged. A one-time migration
adopts pre-existing slot-index history into the PSK key on first load (only when
the PSK is known); clearChannelMessages now wipes both the PSK key and the raw
slot-index key so Build-B's reuse-clear can't be re-migrated onto a new occupant.
Build-A (durable) of epic #190; supersedes Build-B's (#193) guard. Also removes
the dead device-wide fallback read in loadChannelMessages.
Channel message history is keyed by the reusable slot index, not by the
channel's PSK. Adding a channel to a slot that previously held a different
channel surfaced the prior occupant's messages (e.g. #echo history appearing
in a newly QR-added channel).
setChannel now clears the slot's stored history unless the slot already holds
the same channel (same PSK, e.g. a rename). Only deleteChannel cleared before.
Build-B (bleed-stop) of epic #190. Build-A (PSK-keyed history + migration) to
follow. Accepted edge: re-adding the exact same channel that was orphaned
device-side loses its old history (messages carry no PSK to match on).
The Add Channel "Scan QR Code" scanner now accepts channel share URIs
(meshcore://channel/add) alongside community QR JSON: it parses name +
secret, confirms, and adds the channel to the next free slot via
setChannel. Completes the channel-QR round-trip in-app, and interops with
the reference app's channel QRs.
Bumps build to +52 for the b52 combined test binary (path-hash + trace +
channel QR).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Channel.toShareUri/fromShareUri/isValidShareUri encode the reference
MeshCore app's format: meshcore://channel/add?name=<url-encoded>&secret=<hex32>.
A "Share QR Code" action in the channel menu shows the QR via the existing
QrCodeShareDialog, so it round-trips with the reference app.
Encode/decode unit-tested against both real reference examples (#test, #echo).
Scan-to-add follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three routing-match sites keyed/compared nodes by only the first
public-key byte, which collides when two nodes share a first byte on a
2-/3-byte path-hash mesh:
- DirectRepeater.matchesPathStart() replaces the 1-byte
`pubkeyFirstByte == pathBytes.first` direct-repeater check in
chat_screen and path_management_dialog (x3 each).
- map _computeGuessedLocations packs the full configured-width prefix as
the repeaterByHash key and looks up the contact-side hop at the same
width — was keying publicKey[0] but reading pathBytes.last, a silent
miss at width>1 that stopped location-guessing on multi-byte meshes.
- map _filterContactsBySettings overlap detection compares the
configured-width prefix via _samePubkeyPrefix (was publicKey.first).
Adds DirectRepeater.matchesPathStart unit tests. Bumps build to +46 for
the combined path-hash sweep test binary (b46: #151+#154+#155+#156).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "Set Path" dialog parsed, built, and displayed hop prefixes as a fixed
1 byte (substring(0,2)), so on a 2-/3-byte path-hash mesh manual entry produced
wrong-width routing paths and the helper text claimed "1 byte". Make it width-
aware from connector.pathHashByteWidth.
- parsePathPrefixes(text, width, invalid): static + testable; each entry must be
EXACTLY width*2 hex chars (wrong-length / malformed go to invalid, never
silently truncated); width clamped >= 1.
- _updateTextFromContacts / display / maxLength group by the configured width;
the display substring is guarded against short keys.
- show() takes pathHashByteWidth; the chat + path-management callers pass
connector.pathHashByteWidth.
- l10n: reworded the path-entry helper / example / instructions to be width-
agnostic (dropped the "2 hex / 1 byte / first byte" claims). The 17 non-English
locales keep their prior strings, flagged for re-translation (English fixed).
analyze clean; 6 parsePathPrefixes tests (incl. exact-length + clamp). Gemini v1
BLOCKER (unguarded substring) + MAJOR (silent truncation) fixed; v2 MAJORs were
the pre-existing refresh button (out of scope), v2 MINOR (1-byte example) fixed.
Closes#155
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHelper.formatPathHex / resolvePathNames assumed 1 byte per hop, so the
direct-chat "full path" and path-management dialogs rendered routing paths
per-byte (84,AB instead of 84AB) and resolved hop names by a single byte on
2-/3-byte path-hash meshes. Group bytes into pathHashByteWidth-sized hops and
match hop names by the full-width prefix.
- formatPathHex(bytes, width) / resolvePathNames(bytes, contacts, width) group
into width-byte hops (trailing partial hop kept); name match uses the full
hop prefix.
- chat_screen + path_management_dialog pass connector.pathHashByteWidth.
analyze clean; 7 PathHelper tests (incl. width-2 collision-avoidance); Gemini: ship.
Closes#154
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DirectRepeater stored only pubkeyFirstByte (1 byte of the last hop), so the SNR
indicator + Nearby Repeaters dialog showed a 1-byte prefix and matched the wrong
repeater on 2-/3-byte path-hash meshes. Capture the last hop's full configured-
width prefix and use it for display, contact-match, and dedup.
- DirectRepeater.pubkeyPrefix (Uint8List) + prefixHex getter; pubkeyFirstByte
retained for the path-management / chat matching sites (those are #156).
- _updateDirectRepeater captures path[len-width..] (or the pubkey prefix when no
path); dedup by listEquals(pubkeyPrefix).
- snr_indicator: status-bar + dialog render prefixHex; matcher keys on the full
width prefix so the correct repeater name resolves.
Bumps build to +45. analyze clean; 6 DirectRepeater tests (2 new); Gemini: ship.
Closes#151
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The fork-only 0xC1 GPS command was sent to any connected radio — both the
60s self-location poll (on gps=1) and the Settings GPS status query. Stock /
non-Offband MeshCore firmware can't answer it, so gate both behind a
capability check.
- firmwareSupportsOffbandGps(offbandCaps): presence of the Offband-fork
offband_caps byte (device-info v14+), which stock MeshCore never emits.
- requestOffbandGps() hard-returns when unsupported — 0xC1 never goes out.
- _reconcileGpsPolling() centralizes the poll decision (support AND gps=1)
across all three triggers + the device-info reply, so frame order is moot.
- Settings hides the GPS status section on unsupported firmware.
Interim presence-gate; a dedicated OFFBAND_CAP_GPS bit can follow once
firmware defines one. Unit-tested (3 new); Gemini review: ship.
Bumps build number to +43 (test build b43).
Closes#144
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Offband 0xC1 GPS query: 1-byte request -> RESP 0xC1 ASCII reply
(enabled/detected/active/fix/baud/lat/lon/alt_cm/sats/time), parsed into
OffbandGpsStatus (lat/lon /1e6). New GPS-status section in the Location dialog
(live-fix vs stored banner + coords/sats/alt/time). Validated against RedCreek's
feat/gps-state-query test firmware.
#140: the per-minute GPS poll now uses the lightweight 0xC1 query instead of
CMD_APP_START (which re-walked channels + re-drained messages = the BLE re-init
flood); a live fix updates self-lat/lon. Validated on b42 (APP_START ~1/min ->
~0, 0xC1 polls clean every 60s, channel re-walk gone).
Gemini (fix-then-ship): atomic completer-claim in _handleOffbandGps to shrink
the stale-reply race; full elimination needs a protocol sequence id, but the
poll shares in-flight via the re-entrancy guard and the query button is disabled
during a request, so concurrent requests don't occur in practice. The hardcoded
snackbars Gemini flagged in _editLocation are pre-existing l10n debt, not
introduced here; all new strings are localized.
Closes#135Closes#140
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Parse the device-info reply's readable strings (build date / model / firmware
version, NUL-terminated after the 8-byte header) and show firmwareVersion +
deviceModel in Settings → Device Info. Raw strings are logged on connect.
End-anchored field mapping (deviceInfoFields) keeps the version correct on
partial frames.
Gemini (fix-then-ship): removed the unused deviceBuildDate field/getter (dead
state) — the build date stays in the connect log via the raw strings, and
deviceInfoFields still parses + tests it.
Closes#134
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Reply long-press drops the cursor into the composer (post-frame focus). (#131)
- "Reply with route" sends `@[sender] ↩ N hops · via <path>`, byte-truncated with `…`, Cyr2Lat-aware. (#106)
Gemini (fix-then-ship): the unawaited `sendChannelMessage` in `_sendRouteReply` mirrors the established `_sendMessage` convention — failure surfaces via the visible message's delivery status, not the returned Future; holistic channel-send error handling is tracked in #133 per maintainer decision. O(n^2) path truncation is negligible on the <=160-byte payload; the `w<1` guard is a defensive div-by-zero (pathHashByteWidth is 1-3).
Closes#131Closes#106
Part of #132
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Packet Path mis-identified repeaters: a 2-byte path hash like 6A3D was
sliced into two 1-byte hops (6A + 3D), so the first byte collided with an
unrelated repeater (Freemasons 6A..) and the second matched nothing
("Unknown Repeater").
- meshcore_protocol: realHopCount() converts the firmware path BYTE length
to true hops via the device hash width.
- channel_message_path_screen: slice/count/match at the device
pathHashByteWidth (not the unreliable per-message high-bits); bucket and
match on the full w-byte hash (mirrors _pathMatchesContact), not hash[0].
- channel_chat_screen: same width fix on the per-message via-line + hop badge.
- settings: show the build number alongside the version name.
- bump 1.1.2-beta.4+36.
- test: realHopCount regression coverage.
Gemini review (llm-consult): fix-then-ship; 2 findings clarification-only
(_formatHash is canonical hex used identically both sides; pathHashByteWidth
is static per-connection).
Part of epic #112.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
getBrokers logs request-sent, header count, and completed-with-N-brokers-in-Xms or failed-after-Xms (frames + expected count) via FileLogService. A tester Share-logs capture then shows in plain text whether the broker pool load succeeds, stalls, or times out - which the raw BLE frames cannot reveal. Behaviour unchanged (parse-once refactor; all 13 service tests green).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The broker-pool GET put a single fixed 6s deadline on the entire paginated dump. A large pool (6+ brokers) streams field-by-field over ~8s and blew the deadline, so the client falsely reported the pool as not finished even though the device sent it all (the END terminator arrives after the client gave up). Re-arm an inactivity Timer on each received frame: a steadily-streaming dump never times out; only a genuine stall (no frame for the timeout window) fails. Adds a TDD test - a slow-but-steady dump, frames under the timeout but total far over it, must complete.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The repeater "Path hash mode" dropdown showed raw mode numbers (0/1/2). Match
the companion device's selector (settings_screen.dart _PathHashSizeTile) so the
options are self-describing: "1-byte · max 64 hops" / "2-byte · max 32 hops" /
"3-byte · max 21 hops".
Underlying value (mode 0/1/2 = 1/2/3-byte) and the `set path.hash.mode N` wire
command are unchanged — labels only.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Platform-adaptive export on the BLE/frame log screen: the system share sheet on
mobile (the priority path), or open the logs folder in the file manager on
desktop. Web-safe (defaultTargetPlatform, no dart:io); flushes the file first so
it is current. Completes #97.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Always-on file logging so users/support can retrieve a log without enabling
anything in the UI. No-op on web (no filesystem).
- FileLogWriter: rotating file writer (size cap + max files), single + batch
writes, unit-tested against a real temp dir.
- FileLogService: singleton initialised in main(); resolves
getApplicationSupportDirectory()/logs, queues lines, periodic 2s batched
flush, bounded queue, never crashes the app on an IO error.
- AppDebugLogService.log + BleDebugLogService.logFrame write every entry to the
file (app logs always, independent of the in-app viewer's enable gate).
Location per the #97 decision: standard support dir on all platforms (Windows
%APPDATA%\app.offband.meshcore\logs). Still TODO before recompile: access UI
("Open logs folder" on desktop / "Share logs" on mobile).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Consume the additive OCFG_BROKERS dump fields from firmware #172/#173
(backward-compatible — absent fields read as today's enabled/disabled):
- BrokerRuntimeState (`state`) + BrokerLastError (`last_error`) + a pure
BrokerConfig.status mapping -> Connected / Connecting / Failed (reason) /
Held (no clock|low heap) / Enabled / Disabled; held shown neutral, not error.
- Brokers list shows the real status line + colour instead of just "enabled".
- Editor shows jwt_owner / iata_override resolved defaults (`jwt_owner_resolved`,
`iata_resolved`) as greyed placeholders when the raw key is blank; only writes
the raw key when the user enters a value (blank stays the source of truth).
Sourced from the pool dump (getBrokers); getBroker's per-field GET list is
unchanged pending the firmware GET-ability answer on #173. Unit-tested mapping,
parsing, and backward-compat (9 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A firmware build can ACK a broker enable/disable as success without applying it
(HV4; meshcore-firmware#179). The quick toggle and the editor save previously
trusted the ACK and showed a success snackbar, so an ack-but-no-op looked like
it worked.
Both paths now SET, wait a short settle, re-read the slot, and report what the
device ACTUALLY did:
- applied -> confirm
- notApplied -> warn "possible firmware issue"; the editor stays and re-seeds to
the device's true state instead of popping a false success
- unverified -> re-read failed (e.g. an enable that rebooted the device)
Every device is treated identically: the UI reflects the re-read, never assuming
a change took that the device didn't confirm.
- BrokerConfig.classifyApply pure classifier + BrokerApplyOutcome (unit-tested)
- ObserverConfigService.applySettleDelay
- wired into mqtt_brokers_screen quick toggle + broker_editor_screen save
- widget test for the ACK-but-not-applied path
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The BLE/USB self-info retry was an unbounded 3.5s hammer -- the Web path caps at
3 and skips while syncing; BLE had neither. On a slow device handshake it churned
the connect and starved the contact sync, hanging the contact-load bar. Inherited
from upstream zjs81/meshcore-open (git blame; zero Offband commits).
- Replace the unbounded 3.5s Timer.periodic with a self-rescheduling backoff:
3.5s -> 7 -> 14 -> 28 -> 56s, then a steady ~60s keep-alive. Never hard-stops --
a slow/recovering device still gets prompted.
- Add the Web path's skip-while-syncing guard on BLE (per-tick skip, never
permanent: the timer keeps rescheduling, so a settled sync lets the next tick
send).
- Decisions extracted as pure, tested helpers: nextAppStartRetryDelay(attempt)
and shouldSendAppStartRetry({connected, awaitingSelfInfo, syncing}).
- Disconnect teardown (Gemini's amendment) was already present (:2501 / :2374).
Gemini plan-review: Proceed, no blockers. 6 new helper tests; full suite 299 green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware feedback: JWT owner defaults to the device pubkey and IATA override
is optional by definition, so gating a save on them is wrong -- they have
under-the-hood firmware defaults.
BrokerConfig.enableError now checks only the structural fields with no default:
URL present, port in range. The JWT field checks are gone; the firmware enforces
JWT completeness with its defaults, and a genuinely-bad enable surfaces the
firmware's reason via the failure messaging added earlier. The editor's pre-save
check and the list's quick Enable both follow.
Tests updated to the new contract (a JWT broker with blank owner/audience now
enables; a structurally-complete quick Enable confirms). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware test feedback:
- Long-press Enable/Disable was silent on success AND failure. It now confirms
on success and, on failure, surfaces the device's reason (lastError) instead
of nothing.
- The client now refuses to quick-Enable a broker that can't work (incomplete
required fields, e.g. JWT without audience/owner) and says why -- so it never
reports "enabled" on a broker that won't run. (Firmware should reject too.)
- The editor blocked a DISABLE on blank/invalid fields. Validation now gates
ENABLING only -- disabling a slot with partial values is fine; it won't be
active.
Validation rules shared via BrokerConfig.enableError (editor pre-save + list
quick-Enable). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The broker pool gets its own screen, reached from a "MQTT brokers" row in the
Observer pane (replacing the read-only inline list and its stale "pending
firmware support" note).
- MqttBrokersScreen: a tile per broker (tap -> editor, long-press -> Enable /
Disable / Edit / Clear), and a + FAB that opens the next empty slot (disabled
when all 10 are full) -- matching channels_screen's FAB-add pattern. Each
action re-reads only the affected slot, never the full pool dump.
- Observer pane: the broker section is now a navigational row showing
"N configured - M enabled"; the editor is wired in end-to-end.
3/3 screen tests green; full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The edit UI for one broker slot. Staged-save: controls edit local state; Save
sends only the CHANGED fields through saveBroker (enabled written last), so a
partial save can't leave a live-corrupt broker.
- Fields: url, port, transport, auth_type, username, write-only password,
topic_prefix, iata_override, jwt_* (when auth=jwt), ca_cert (when tls/wss),
plus the enabled toggle.
- Validation before any SET: port 1-65535, jwt audience+owner when auth=jwt.
- Write-only password: sent only when typed; blank keeps the stored secret.
- Refresh: single-slot re-GET (getBroker) + reseed, with a dirty discard guard.
- Back button guards unsaved edits (PopScope -> Discard? dialog) -- Gemini's
state-loss finding.
4/4 widget tests green. Brokers list screen + Observer-pane wiring next.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The write half of the broker editor, against RedCreek's confirmed field-at-a-time
contract. The existing 0xC0 key/value command already carries the broker keys --
no new wire codes -- so the codec comment at observer_config_client.dart:166 is
stale, not a gap.
- saveBroker(): disable a live slot first, write each changed field, write
`enabled` LAST. Stops at the first ERR/timeout and reports the failed field --
a partial save leaves the slot disabled, never live-corrupt (activation guard).
TDD: ordering + partial-failure tests.
- clearBroker(): mqtt.broker.<slot>.clear.
- getBroker(): single-slot re-GET via 14 per-field GETs (recovery / post-save
read), not the 84-frame pool dump. Password is write-only -> best-effort.
Key spellings (mqtt.broker.N.enabled / .clear, scalar field GET) are inferred
from the existing scheme; they're the one thing the joint firmware test confirms.
12/12 service tests green. UI (brokers screen + editor) next.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware answers RESP_CODE_ERR for an empty/invalid channel index, but
_handleErrorFrame never advanced the in-flight channel sync. So every empty slot
waited out the 2s timeout + 3 retries (~8s each): a device with a few populated
channels out of a large capacity took minutes to sync (~40 slots requested, ~29
empty -> ~4 min) before the real channels (which answer CHANNEL_INFO) finally
synced in the last couple seconds.
Now an ERR that lands while a channel GET is in flight (and no generic-ack
command is waiting -- that one is order-correlated to the ERR first) advances to
the next slot immediately, mirroring the CHANNEL_INFO success path minus adding
a channel. The decision is pinned as a pure static predicate and tested,
matching the connector's existing decision-helper test convention.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three observer-delta fixes (per the #80 sync diagnosis / G2):
- A: settings screen gates the Observer category via context.select on the
supported flag, not a connector-wide context.watch -- the watch rebuilt the
whole settings screen on every sync frame, thrashing the UI thread.
- B: a flat Save re-reads only the flat settings (refresh includeBrokers:false),
never the 84-frame broker pool -- no BLE re-flood for a display toggle.
- C: the initial observer read is deferred until the device's channel/contact
sync settles, so it never competes with that sync for BLE.
TDD: B (no OCFG_BROKERS on a flat refresh) + C (refresh deferred while syncing,
fires once idle). Full observer suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The G2 BLE log showed the config protocol works (GETs return values; the broker
dump starts) but the firmware's broker dump stalls without BROKERS_END, so
getBrokers() times out. The client was treating that as a TOTAL failure --
discarding the 7 flat settings it read cleanly and blanking the pane.
Now the broker pool loads independently: refresh() builds + shows the flat
config even when getBrokers fails, flags brokersUnavailable, and the pane shows
the broker section as "unavailable" instead of going stale. Flat settings stay
usable. TDD red->green; full observer suite (39) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Closes the 2 MINOR findings from the G1 re-review (#76):
- MINOR-A: ObserverConfigService.refresh() no longer wipes lastError / clears
stale on a PARTIAL read. A null from any getFlat is a failed read; the
snapshot is marked stale and the error kept (error-visibility).
- MINOR-B: the settings pane validates status_interval against the firmware
range (10-3600) before sending; an out-of-range value is not put on the wire
and the user is told.
TDD: both tests RED first (current sent '5'; refresh wiped the error), GREEN
after. Full observer suite (37 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hardened the staged-save pane (settings_screen capability gate already correct):
- Normalize an unexpected device rotation to a valid SegmentedButton segment
{0,180} so the control always has a valid selection and never echoes an
out-of-range value back on save.
- Disable Save during a refresh (no save/refresh race on the controllers).
- digitsOnly formatter on status-interval (firmware still range-checks).
- Keys on the SSID/password fields for robust widget-test targeting.
4 widget tests pin the security-sensitive behavior: saves send ONLY changed
keys, a blank password keeps the stored secret, an entered password is sent as
wifi.pwd then the field clears, rotation is normalized, stale/error surfaced
(SAFELANE §6). Full observer suite (33 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gemini MAJOR #4 (offset unverified / short-frame robustness):
- Offset VERIFIED against firmware MyMesh.cpp: the device-info tail is three
consecutive out_frame[i++] writes -- client_repeat@80, path_hash_mode@81,
offband_caps@82. Bytes 80/81 are shipping (path-hash), so caps@82 is correct
by adjacency, not a guess.
- Extracted MeshCoreConnector.parseOffbandCaps (pure, bounds-checked) so the
guard + offset are unit-testable; _handleDeviceInfo delegates to it.
- 4 tests pin: pre-v14 short frame -> null, len-83 reads byte 82 verbatim,
observer bit round-trips supportsConfig, hostile truncated frames never OOB.
Live observer node confirms end-to-end at G2.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Greens A2's adversarial tests, fixing the Gemini findings:
- BLOCKER #1 (race): a chain-lock (_serialized) serializes every transport
round-trip, so overlapping refresh()/setFlat() can no longer cross responses
(firmware has no request id; responses correlate by order).
- MINOR #6 (secret leak): error messages redact secret key names
(wifi.pwd / *.password / *.pwd -> "<secret>").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- screens/settings/observer_settings_view.dart: staged-save pane for WiFi
(ssid/pwd/enabled), MQTT region (iata/status_interval), display
(always_on/rotation 0|180), with Save (changed keys only) + Refresh +
stale/error banners; the broker pool renders read-only (enable/clear await
the firmware F-task).
- settings_screen.dart: register the Observer category, gated on
ObserverConfigService.supported (re-evaluated as the connector's offband_caps
flips on connect/disconnect).
- connector/meshcore_connector.dart: parse the offband_caps byte (device-info
byte 82, after path_hash_mode) + expose offbandCaps.
- services/observer_config_service.dart: supported computed live from the
connector (version gate + cap bit).
- main.dart: provide ObserverConfigService.
Strings are English-only pending l10n ARB keys.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reflow the systemDevices.map(...) chain after the .where() removal so
`dart format --set-exit-if-changed .` is clean. No behavior change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The scanner filtered advertisements by device-name keyword
(withKeywords: deviceNamePrefixes), so any MeshCore/Offband device
whose advertised name fell outside the hardcoded prefix list was
invisible to the scanner — even though the official MeshCore app,
which scans by the Nordic UART service UUID, found them. Switch
startScan to withServices: [Guid(service)] and drop the now-redundant
name filter on the already-service-scoped systemDevices fallback.
Device-tested on a Samsung S25: a previously-invisible node now
appears in the scan.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CI's `dart format --set-exit-if-changed .` step is repo-wide. My A/B/C
commit hand-wrote the .catchError blocks without running the formatter,
and 2 settings views carried pre-existing format drift from #28. dart
format reflows all three (whitespace only, identical logic):
- lib/connector/meshcore_connector.dart (this PR's blocks)
- lib/screens/settings/app_settings_view.dart (pre-existing, #28)
- lib/screens/settings/message_settings_view.dart (pre-existing, #28)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
settings_screen action handlers fire-and-forgot or awaited-without-catch several connector calls, and _loadVersionInfo called setState after an await with no mounted guard. Add a mounted guard to _loadVersionInfo; try/catch + error snackbar to the GPS-enable toggles (inline + _editLocation dialog) and getContacts; await syncTime in _syncTime so the 'synchronized' snackbar shows only on success (it previously fired before the await); and in _editLocation's save, capture the messenger before the pop and wrap the setCustomVar/setNodeLocation/refreshDeviceInfo awaits.
Verified non-issues: deleteAllPaths is void, _PrivacySection._apply() already has a try/catch, and exportGPX catches internally and returns gpxExportFailed. Completes #28; error strings English for now (separate l10n sweep).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings onChanged/onTap callbacks fire-and-forgot AppSettingsService Future<void> setters, so a persist failure rejected unhandled and was swallowed. Add a shared persistSetting(context, action) helper that awaits the setter in a try/catch and shows a dismissible error SnackBar, capturing the messenger before the await so it survives a picker-dialog pop. Wrap the 27 onChanged/onTap setter sites in app_settings_view + message_settings_view; setAppDebugLogEnabled and setNotificationsEnabled (which await + show their own confirmation) get an inline try/catch instead.
Covers the two onChanged panes; the settings_screen action flows (GPX export, location dialogs, version-info mounted guard) follow in a second pass, so #28 stays open. Error strings are English for now (separate settings l10n sweep).
Adds a persistSetting widget test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DirectRepeater.ranking added recencyScore (0..1.8M) to the SNR term (1000/dB), so recency dominated (~1 dB == 1 second), contradicting the comment that recency only breaks ties. Scale recency to a 0-999 bonus so SNR (1000/dB) is primary and recency only decides sub-dB ties.
Offset SNR by its floor (+32; SX126x SNR spans -32..+31.75 dB) so every live ranking stays >= 0, above the -1 stale sentinel; otherwise the scaled-down recency leaves live rankings negative and a stale repeater would outrank a live one.
Adds DirectRepeater.ranking tests: SNR-first, recency tie-break, stale=-1, live-always-outranks-stale.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
disconnect() never resets the channel store scope (publicKeyHex), so a channel write in the post-disconnect async gap still persists -- to the last radio's scope, and into a different radio's scope after reconnecting (cross-radio bleed). Add if (!isConnected) return; to the UI-triggered persisters setChannelUnreadCount, markChannelRead, setChannelOrder. Chosen over clearing _channels, which would risk a racing mutator persisting an empty list and wiping stored channels.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHistoryService capped each contact's recentPaths at 100 but dropped any new distinct path once full, so the list froze on the first 100 ever seen and never refreshed with newer/better routes. Evict the lowest-_scorePathRecord entry to make room, keeping the strongest 100. Adds a regression test (full history evicts the weakest to admit a new path).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Query FlutterBluePlus.systemDevices on every native platform (was Linux-only)
so a radio already connected to another central -- e.g. Liam's MeshCore app --
appears in the picker and we attach to the existing link. A connected BLE radio
stops advertising, so a scan alone never finds it.
Parse a leading @[Name] in the message body and render it as a rounded
pill that sets the name apart from the rest, matching the reference
client. Handles a missing space after the mention. Lives in
TranslatedMessageContent so channel + direct chat both get it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the typed text anywhere in the shortcode name (not just the prefix),
ranked exact > prefix > substring, so `:check` surfaces the checkmarks (✅ is
`white_check_mark`). Add check/checkmark/tick aliases for ✅ in a separate,
regen-safe map the chat + channel composers consume.
Closes#45
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two more connector silent-failures from the review. requestRadioStats had an empty 'catch (_) {}' (now logs). setChannelUnreadCount fired unawaited(saveChannels) with no error path (now .catchError + logs). Verified: setContactUnreadCount calls a void debounced store method -- no call-site Future (Gemini false positive); the actual swallow is inside unread_store's debounce timer, flagged separately.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
BLE onValueReceived.listen had no onError, while USB (L1557) and TCP (L1669) both attach one that logs and gracefully disconnects; an error emission on the BLE notify stream was unhandled. Add a matching onError. Also await sendMessageWithRetry in the reaction branch of sendMessage -- the normal path already awaits it; the reaction path's unawaited call swallowed failures, contradicting its own 'same as normal messages' comment.
Verified, not assumed: Gemini's 'disconnect() not try-caught' was a FALSE POSITIVE (already wrapped at L2484-2489); 'deleteAllPaths silent void' is a sync in-memory clear (no async failure path). flutter analyze clean; Gemini-reviewed with no critique of these two changes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Human testing found Privacy controls slow to respond. _PrivacySection._apply called refreshDeviceInfo() after every toggle/dropdown change -- a 5-frame device re-query (deviceQuery, appStart, battery, customVars, autoAddFlags) that does not even re-fetch telemetry. setTelemetryModeBase already updates the connector's local state and calls notifyListeners(), so the refresh was pure overhead. Removed it; apply is now a single setOtherParams frame, matching the auto-add section's responsiveness.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bring radio config up a level: render the form directly in the Radio Settings pane with a full-width Save button, instead of a tile that opens a dialog. _RadioSettingsDialog -> _RadioSettingsForm; build returns an inline Column of the (verbatim) fields + Save; _saveSettings drops the Navigator.pop (no dialog), which also resolves the unguarded-pop-after-await finding. Removed _showRadioSettings. Field widgets, controllers, preset matching, and off-grid snapshot logic unchanged.
Key the form on the device's current radio values (freq/bw/sf/cr/txpower/clientRepeat) so a device-reported change re-seeds it -- the dialog got this for free by reopening; the persistent inline form needs the key.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Privacy save/cancel dialog with an inline _PrivacySection in the pane: advert-location + multi-ACKs toggles and the three telemetry-mode dropdowns now apply on change. All five commit through one setTelemetryModeBase call, so each control sends the full current state (coalesced via an apply guard) and reverts to the device's values on failure with an error snackbar -- folding in the #28 error handling for this pane. Removes the category->tile->dialog hop; drops _privacySettings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flatten two more redundant layers in the settings IA. Radio Stats: extract CompanionRadioStatsScreen's body into an embeddable CompanionRadioStatsBody (carrying the 1s-polling acquire/release lifecycle), add a top-level Radio Stats category that renders it directly, and remove the nested Radio Stats tile from the Radio Settings pane (the screen is kept; still pushed from radio_stats_entry.dart). Rename the Contact Settings category to Contacts (reusing contacts_title) with a contacts icon; rename _messagesContactsPane to _contactsPane.
Also fixes a pre-existing chart-freeze surfaced by review: _NoiseChartPainter compared only sample-list length, so the noise chart stopped repainting once the 120-sample buffer filled. Now compares contents via listEquals.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Split the monolithic AppSettingsScreen (reached via a redundant tile->push from the App Settings category) into two embeddable views rendered directly in the shell panes: AppSettingsView (appearance, translation, battery, map, Cyr2Lat, debug) and MessageSettingsView (notifications + message handling, a new top-level 'Message Settings' category after Contacts). Removes the category->tile->separate-screen layer; each category now lands directly on its settings. Deletes app_settings_screen.dart (no remaining refs). Adds settings_messageSettings(+Subtitle) l10n keys (en template; other locales fall back pending the l10n sweep). Card bodies moved verbatim -- behavior preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Contact-settings tile->modal dialog with an inline _AutoAddSection: five SwitchListTiles that apply on toggle (send config frame + refetch flags). Apply path has a coalescing guard (re-applies the latest state instead of overlapping sends) plus inline error handling (revert to device flags + snackbar). _PathHashSizeTile onChanged wrapped in try/catch + error snackbar.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Run dart format across the repo to clean drift in 5 files (channel_chat_screen, settings_screen, settings_shell, gif_picker, mention_autocomplete) from earlier straight-to-dev commits that never hit the format CI. No logic change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the monolithic card+dialog settings screen with a responsive master-detail shell (rail+pane when wide, list+push when narrow; layout chosen by width via LayoutBuilder). Regroup the existing settings into intent categories and surface Path Hash Size (1/2/3-byte) in Radio and range, the first device-config-parity gap (previously repeater/CLI-only).
No settings lost: every existing control stays reachable. Phase 0 of #7.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
gif_picker.dart reads GIPHY_API_KEY from String.fromEnvironment instead of a
hardcoded constant - key is supplied at build time (--dart-define-from-file=
dart_defines.json, gitignored), never in source or history. Adds
dart_defines.example.json template + .gitignore entry; picker shows a hint
when no key is configured.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Strycher