Every received DM/channel message now logs arrival wall-clock vs the
sender-claimed payload timestamp (delta + TIME ANOMALY marker beyond
24h), routed directly to AppDebugLogService so the rotating on-disk
trail is unconditional. Models persist a nullable rxTime set at every
live ingest construction site; legacy stored records stay null.
Diagnostic child of #280.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The channel long-press sheet's binary Mute/Unmute tile becomes a
Notifications tile showing the current level, opening a picker with All
messages / Mentions only / Off.
The mode is read and written against the channel's PSK identity via
AppSettings.channelNotifyKey, so it survives a rename and does not follow a
reused slot (#259). Plain ListTiles with a check mark are used rather than
RadioListTile to stay clear of the Radio groupValue deprecation.
Adds channels_notifications / channels_notifyAll / channels_notifyMentionsOnly
/ channels_notifyOff to app_en.arb and regenerates l10n; the other 17 locales
fall back to English and are recorded in untranslated.json.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
_maybeNotifyChannelMessage now switches on ChannelNotifyMode instead of the
binary isChannelMuted check. mentionsOnly notifies only when the message
carries a canonical @[selfName] mention.
The mode is keyed by the channel's PSK identity, reusing the same
_findChannelByIndex(index)?.pskHex resolver the message store already uses
for history (#194), so the setting survives a rename and does not follow a
reused slot.
The mention is matched against resolvedText (post-translation) so a
translated mention still fires, and case-insensitively since a hand-typed
mention need not match the advert casing. Bare @Name is deliberately not
matched: it false-positives on ordinary text and cannot be delimited for
names containing spaces.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds ChannelNotifyMode { all, mentionsOnly, off } and a channelNotifyModes
map keyed by PSK identity via AppSettings.channelNotifyKey, mirroring the
psk_ marker scheme ChannelMessageStore uses for history (#194). Keying by
PSK rather than display name means the setting survives a channel rename
and does not bleed across a slot reassignment (#193).
Legacy muted_channels stays readable and keeps being written:
AppSettingsService.channelNotifyMode falls back to it by name so a channel
muted before this feature still reports off, and setChannelNotifyMode keeps
it in sync so rolling back to a build without notify modes still honours an
Off channel. Name cannot be resolved to a PSK at the data layer, so the
migration is a read-through fallback rather than an upfront pass.
The notification gate and Channels UI still use the legacy isChannelMuted
path; #261 and #262 switch them over.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Guard _sendMessageDirect too (automatic retries route there without
passing sendMessage, so a pre-block message kept retrying post-block),
log both connector drops instead of returning silently, and surface a
blocked-contact snackbar on the manual retry and reaction paths.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adversarial review flagged that the composer swap is UX-only: retry-tap
and reaction sends call connector.sendMessage directly, bypassing the
hidden composer. Add a block guard at sendMessage (covers normal DMs,
reactions, and retries), mirroring the incoming DM-drop so a block is
symmetric. The composer notice bar remains the visible affordance.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the DM composer with an "Unblock to message" notice bar when
the contact is blocked, so a block also stops outgoing DMs (previously
only incoming DMs/adverts were suppressed). Inline unblock restores the
composer. Adds block_composerNotice l10n string and documents the
outgoing-DM rule in block-contract-as-built.md §4.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DTR low→high pulse in the desktop USB open path resets ESP32 USB-Serial/JTAG
chips (VID 303A: C6/H2/S3-HWCDC) into ROM download mode mid-handshake, wedging
the device until a physical reset. The pulse exists for nRF52 (VID 239A)
reconnect-after-unclean-disconnect, so it can't just be removed.
connect() now recovers the port's USB VID from the flserial enumeration
(hardware_id) and gates the pulse: 239A keeps the DTR low→high pulse; 303A and
any unknown/unparseable VID open with DTR asserted and no pulse. VID lookup is
enumeration-only (never opens the port). New usb_vid helper parses both flserial
hardware_id formats (Windows VID_XXXX and macOS/Linux VID:PID=xxxx:xxxx), unit
tested. Build of epic #245.
Settings showed the self public key truncated to 16 hex chars + "..." as
plain Text (settings_screen:262/:410), so it couldn't be shared. Show the
full key, make it selectable, and add a copy button beside it.
- _buildInfoRow gains an optional copyValue: renders the value as
SelectableText + a copy IconButton that copies the full key and shows a
"Public key copied" snackbar. Both self-pubkey rows pass the full key.
- New l10n string settings_publicKeyCopied (regenerated localizations +
untranslated.json).
Part of #234.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The autocomplete only completed an unambiguous emoji on Enter; ambiguous
queries (e.g. `:shrug` with multiple matches) sent the literal text instead of
the highlighted glyph, and mentions only selected via Tab. Enter now accepts
the highlighted item (emoji or mention) like Tab, then sends; Tab still selects
without sending, Esc dismisses to send literal text. Removes the now-dead
_emojiQuery field. (#231, emoji + mentions per Ben)
Widget tests: Enter inserts the highlighted emoji (ambiguous `:shr`) and the
highlighted mention (`@Bo` -> @[Bob]).
Part of #231.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A reply prepends `@[Name] `, so a reply-gif renders the gif (prior commit);
this adds the `@Name` reply chip above it so it is clear the gif is a reply.
Extracts TranslatedMessageContent.mentionChip + leadingReplyName (shared by
inline rendering and the reply-gif header); the channel bubble builder renders
the chip above the GifMessage. DMs have no reply feature, so channel-only.
Part of #232.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two shared-root render gaps (message tokens were only matched at fixed
positions):
- TranslatedMessageContent: parse @[Name] anywhere (leading, inline, or
repeated) and render each as a chip; messages without a mention keep full
link support (#233).
- GifHelper.parseGif: strip a leading `@[Name] ` reply prefix before matching
so a reply-with-gif resolves to the gif instead of literal text; arbitrary
text before a gif is still left as text (#232).
Tests: parseGif reply/format cases + widget tests for inline/leading/multiple
mention chips. Full suite 402 green.
Part of #233, #232.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Race (data loss): exclude keys the user block/unblocked WHILE a BLOCK_LIST dump
was in flight from the union (they were already pushed + local is authoritative)
-> no re-import of an unblock, no redundant re-push.
- _pubKeyHexToBytes returns null on malformed hex (try/catch + length) so a corrupt
persisted key can't crash the unawaited push.
- Cancel _blockListRetryTimer + reset dump state on disconnect (timer leak).
Justified/not-fixed: generic [0x01][0x06] error is unreachable (we only build
well-formed 32-byte frames); Completer-correlation is out of scope for v1.
Epic B #166 / #179#180. Gemini audit: docs/llm-consultations/2026-07-14-epicAB-*.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Connector parses ADD/REMOVE/CLEAR replies; ADD ok=0 (node store full at 32) sets
blockOffloadStoreFull (local stays authoritative), cleared on reconcile. BlockedView
shows a firmware-offload status row when supportsOffbandBlock — 'active', or a
'radio block list full' warning. Adds block_offload* l10n.
Epic B #166 / B5 #180.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
BlockService gains a firmwareSync sink (fired on real block/unblock/promote) and
importKeys (pull side, no echo). Connector sets the sink in initialize, pushes
ADD/REMOVE via 0xC2 when supportsOffbandBlock, and on device-info (caps landed)
pulls BLOCK_LIST. On dump completion: UNION — import node keys missing locally
(no echo), push local keys the node lacks; never remove (only explicit unblock
sends REMOVE). Non-Offband radios skip all of it (app-local only).
Epic B #166 / B4 #179.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Route 0xC2 frames in _handleFrame; accumulate the LIST dump (START 0xFF count ->
KEY index+key:32 -> END 0xFE). Detect truncation (count vs received; APP_START
early-END uses the same 0xFE) and re-request on a 2s settle. Never derive
removals from a partial pull. Union reconcile wired in B4.
Epic B #166 / B3 #178.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Build frames for ADD/REMOVE (pubkey:32) / LIST / CLEAR; parse the 3-byte
[0xC2][sub][ok] reply (OffbandBlockReply). Generic error frame is [1][6]
(respCodeErr/errCodeIllegalArg), NOT 0xC2-prefixed. LIST streamed dump parsed
in B3.
Epic B #166 / B2 #177.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-len byte packs a hash-mode hint in the high 2 bits and the
path byte-length in the low 6. Contact.fromFrame stored it raw, so a direct
node at 2-byte mode (0x40) read as pathLength 64: "64 hops" in the UI, a ~195s
ACK timeout, and up to 64 junk bytes pulled into contact.path that broke
repeater status/telemetry/neighbors until the path was cleared (#222).
- contact.dart: decode via pathHopCount (& 0x3F); keep 0xFF as the flood
sentinel; use the decoded length for safePathLen so path bytes stay clean.
- chat_screen _currentPathLabel: show realHopCount(pathLength, pathHashByteWidth)
so 2/3-byte nodes read the correct hop count; 0 -> Direct.
- Regression test for 0x40/0x00/0x03/0x44/0xFF; updated two model_changes tests
that codified the old raw mapping.
Part of #222 (stays open for on-hardware validation by the reporter).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gemini review (HIGH): add !mounted guard after the async block/blockName before
showing the snackbar. Captured messenger already made it safe, but this hardens
against showing on a popped route. (MEDIUM 'stale itemBuilder read' assessed as a
false positive: context.read in itemBuilder returns live state at menu-open.)
Epic A #165 / A5 #172.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
BlockService.maybePromote(name,key): when a name-only block links to a pubkey,
add the key to blockedKeys and drop the name entry. Connector calls it on every
contact advert AND incoming DM (the two ways we learn a name<->key link).
_pruneExpiredNames on load drops name-only blocks older than 30 days.
Epic A #165 / A7 #174. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New BlockedView pane (Settings category, after Privacy): lists blocked pubkeys
(contact name when resolvable, else short key) and name-only channel blocks, each
with Unblock; empty state when nothing blocked. App-local; firmware-offload
indicator deferred to Epic B. Adds block_* settings l10n.
Epic A #165 / A6 #173. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Completes the A5 entry points: contact long-press sheet, DM app-bar overflow, and
discovery item sheet each get a Block/Unblock toggle (by pubkey, reflecting current
state). Pairs with the channel 'Block sender' from 8a2e764.
Epic A #165 / A5 #172. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Long-press a channel post -> Block sender: resolve the claimed name to known
pubkey(s) and block each (full block across DM+adverts+all channels, multi-device
covered); if unresolved, block the name globally across ALL channels (promotes to
pubkey later, #174). Adds block_* l10n strings. A5 channel surface;
contacts/chat/discovery + unblock still to come.
Epic A #165 / A5 #172. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Connector: resolveContactKeysByName(name) maps an anonymous channel sender
(name-only) to matching contact/discovered pubkeys (self-heals via adverts
keeping contact names current).
- channel_chat_screen: hide a post only when the name resolves and EVERY
matching pubkey is blocked (ambiguous namesake with any unblocked match still
shown), or the name is in blockedNames. View-layer filter only.
Epic A #165 / A3 #170. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Connector: BlockService injected via initialize(); incoming DM from a blocked
key dropped (no thread/unread/notify), advert notifications gated at all 3
sites (advert still processed for name self-heal). App-push-layer only.
- Contacts + Discovery: blocked entries stay VISIBLE with a red block icon
(BlockedBadge) + strikethrough/muted name (not hidden).
- New lib/widgets/blocked_badge.dart.
Epic A #165 / A2 #169. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
App-global (NOT per-device) block list, source of truth for the client:
- BlockStore persists blockedKeys (pubkey hex) + blockedNames (name->first-seen
epoch, for A7 promote-and-prune) via PrefsManager, global keys.
- BlockService (ChangeNotifier): isBlocked/isNameBlocked/block/unblock/
blockName/unblockName + unmodifiable accessors.
- Wired into main.dart MultiProvider.
Epic A #165 / A1 #168. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mirror every queue-drain decision -- requested, deferred (which guard),
asking radio, message received, no-more, timeout/give-up, post-channel
proactive fire -- into the App Debug Log via _logQueueSync, so a missed or
stuck drain on reconnect is diagnosable from the device.
Diagnostic only; the targeted fix follows once the log shows the failure.
Refs #51
Per meshcore-firmware/docs/trace-path-format.md: a TRACE route must exclude
the origin (implicit at both ends). If route[0] is our own node's prefix it
matches no forwarding node (we are the sender) -> the packet never advances
-> RESP_CODE_SENT then a silent timeout (the doc's #1, most-common cause).
buildPath now drops a leading self hop before assembling the round trip.
Bumps build to +51 for the b51 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
App Debug Log showed every failing trace sending an empty path ->
"Firmware responded with error code: 1". Cause: repeaters with a flood
route (path stored as all-zeros) were treated as routed; buildPath
collapsed the all-zero path to empty; the firmware rejects an empty trace.
- buildPath: an empty OR all-zero path now traces the target's own width
prefix (never returns an empty payload).
- _doPathTrace: guard - never send an empty path; surface "not available".
- Repeater menu: constant "Path Trace" label (no more Ping/Path-Trace
flip-flop); a flood path (all-zero) counts as no route -> direct ping.
Bumps build to +50 for the b50 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The map "Current path" panel joined _pathTrace byte-by-byte, so once the
builder started capturing the full configured-width prefix per tap (#150),
a single 2-byte node read as "84,f4" — looking like two hops. Format via
PathHelper.formatPathHex at the configured width so it reads "84F4".
Bumps build to +49 for the b49 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The repeater contact menu hardcoded "Ping" and always sent a target-only
(direct) trace, so a multi-hop repeater offered a "Ping" that could never
return. Mirror the room behavior: a repeater with a known route is
labelled "Path Trace" and traced along that route (round-trip); only a
direct neighbour (no path) shows "Ping" and pings directly.
Bumps build to +48 for the b48 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The trace was width-1 end to end (flags=0, a 1-byte path, and a
1-byte-per-hop parse + render), so on a 2-/3-byte path-hash mesh it
returned 1-byte hops (`6A`, not `6Axx`) and failed to route where a
1-byte prefix is ambiguous ("Path trace not available").
- Send: path_sz = floor(log2(width)); build width-byte hops — the
repeater/room "Ping" prefixes (contacts_screen), the round-trip
buildPath (now mirrors by hop, not byte), and the map trace builder.
- Parse: read the flag byte for the hop width, group the hash bytes into
packed width-byte hops, key contacts by the full prefix, 1 SNR per hop.
- Render: list panel + markers + map points iterate packed hops, labelled
at the configured width.
PathHelper gains tracePathSz / traceHopBytes / packPrefix / tracePathHops
/ buildTraceRoundTrip, all unit-tested (incl. width-2 hop mirroring).
Bumps build to +47 for the b47 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gemini review flagged setPublicKeyHex using `value.length > 10`, which would
store an empty scope for an exactly-10-char device key (unreachable today —
MeshCore public keys are 64 hex — but inconsistent with ChannelStore, which
uses >=10). Align to >=10 for consistency and to remove the latent off-by-one.
Channel message history was persisted keyed by the reusable slot index, so a
channel added to a slot that once held another channel inherited its messages.
Storage now keys by the channel's PSK identity via a resolver on the store
(index -> channel PSK), leaving all call sites unchanged. A one-time migration
adopts pre-existing slot-index history into the PSK key on first load (only when
the PSK is known); clearChannelMessages now wipes both the PSK key and the raw
slot-index key so Build-B's reuse-clear can't be re-migrated onto a new occupant.
Build-A (durable) of epic #190; supersedes Build-B's (#193) guard. Also removes
the dead device-wide fallback read in loadChannelMessages.
Channel message history is keyed by the reusable slot index, not by the
channel's PSK. Adding a channel to a slot that previously held a different
channel surfaced the prior occupant's messages (e.g. #echo history appearing
in a newly QR-added channel).
setChannel now clears the slot's stored history unless the slot already holds
the same channel (same PSK, e.g. a rename). Only deleteChannel cleared before.
Build-B (bleed-stop) of epic #190. Build-A (PSK-keyed history + migration) to
follow. Accepted edge: re-adding the exact same channel that was orphaned
device-side loses its old history (messages carry no PSK to match on).
The Add Channel "Scan QR Code" scanner now accepts channel share URIs
(meshcore://channel/add) alongside community QR JSON: it parses name +
secret, confirms, and adds the channel to the next free slot via
setChannel. Completes the channel-QR round-trip in-app, and interops with
the reference app's channel QRs.
Bumps build to +52 for the b52 combined test binary (path-hash + trace +
channel QR).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Channel.toShareUri/fromShareUri/isValidShareUri encode the reference
MeshCore app's format: meshcore://channel/add?name=<url-encoded>&secret=<hex32>.
A "Share QR Code" action in the channel menu shows the QR via the existing
QrCodeShareDialog, so it round-trips with the reference app.
Encode/decode unit-tested against both real reference examples (#test, #echo).
Scan-to-add follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three routing-match sites keyed/compared nodes by only the first
public-key byte, which collides when two nodes share a first byte on a
2-/3-byte path-hash mesh:
- DirectRepeater.matchesPathStart() replaces the 1-byte
`pubkeyFirstByte == pathBytes.first` direct-repeater check in
chat_screen and path_management_dialog (x3 each).
- map _computeGuessedLocations packs the full configured-width prefix as
the repeaterByHash key and looks up the contact-side hop at the same
width — was keying publicKey[0] but reading pathBytes.last, a silent
miss at width>1 that stopped location-guessing on multi-byte meshes.
- map _filterContactsBySettings overlap detection compares the
configured-width prefix via _samePubkeyPrefix (was publicKey.first).
Adds DirectRepeater.matchesPathStart unit tests. Bumps build to +46 for
the combined path-hash sweep test binary (b46: #151+#154+#155+#156).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "Set Path" dialog parsed, built, and displayed hop prefixes as a fixed
1 byte (substring(0,2)), so on a 2-/3-byte path-hash mesh manual entry produced
wrong-width routing paths and the helper text claimed "1 byte". Make it width-
aware from connector.pathHashByteWidth.
- parsePathPrefixes(text, width, invalid): static + testable; each entry must be
EXACTLY width*2 hex chars (wrong-length / malformed go to invalid, never
silently truncated); width clamped >= 1.
- _updateTextFromContacts / display / maxLength group by the configured width;
the display substring is guarded against short keys.
- show() takes pathHashByteWidth; the chat + path-management callers pass
connector.pathHashByteWidth.
- l10n: reworded the path-entry helper / example / instructions to be width-
agnostic (dropped the "2 hex / 1 byte / first byte" claims). The 17 non-English
locales keep their prior strings, flagged for re-translation (English fixed).
analyze clean; 6 parsePathPrefixes tests (incl. exact-length + clamp). Gemini v1
BLOCKER (unguarded substring) + MAJOR (silent truncation) fixed; v2 MAJORs were
the pre-existing refresh button (out of scope), v2 MINOR (1-byte example) fixed.
Closes#155
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHelper.formatPathHex / resolvePathNames assumed 1 byte per hop, so the
direct-chat "full path" and path-management dialogs rendered routing paths
per-byte (84,AB instead of 84AB) and resolved hop names by a single byte on
2-/3-byte path-hash meshes. Group bytes into pathHashByteWidth-sized hops and
match hop names by the full-width prefix.
- formatPathHex(bytes, width) / resolvePathNames(bytes, contacts, width) group
into width-byte hops (trailing partial hop kept); name match uses the full
hop prefix.
- chat_screen + path_management_dialog pass connector.pathHashByteWidth.
analyze clean; 7 PathHelper tests (incl. width-2 collision-avoidance); Gemini: ship.
Closes#154
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DirectRepeater stored only pubkeyFirstByte (1 byte of the last hop), so the SNR
indicator + Nearby Repeaters dialog showed a 1-byte prefix and matched the wrong
repeater on 2-/3-byte path-hash meshes. Capture the last hop's full configured-
width prefix and use it for display, contact-match, and dedup.
- DirectRepeater.pubkeyPrefix (Uint8List) + prefixHex getter; pubkeyFirstByte
retained for the path-management / chat matching sites (those are #156).
- _updateDirectRepeater captures path[len-width..] (or the pubkey prefix when no
path); dedup by listEquals(pubkeyPrefix).
- snr_indicator: status-bar + dialog render prefixHex; matcher keys on the full
width prefix so the correct repeater name resolves.
Bumps build to +45. analyze clean; 6 DirectRepeater tests (2 new); Gemini: ship.
Closes#151
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The fork-only 0xC1 GPS command was sent to any connected radio — both the
60s self-location poll (on gps=1) and the Settings GPS status query. Stock /
non-Offband MeshCore firmware can't answer it, so gate both behind a
capability check.
- firmwareSupportsOffbandGps(offbandCaps): presence of the Offband-fork
offband_caps byte (device-info v14+), which stock MeshCore never emits.
- requestOffbandGps() hard-returns when unsupported — 0xC1 never goes out.
- _reconcileGpsPolling() centralizes the poll decision (support AND gps=1)
across all three triggers + the device-info reply, so frame order is moot.
- Settings hides the GPS status section on unsupported firmware.
Interim presence-gate; a dedicated OFFBAND_CAP_GPS bit can follow once
firmware defines one. Unit-tested (3 new); Gemini review: ship.
Bumps build number to +43 (test build b43).
Closes#144
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Offband 0xC1 GPS query: 1-byte request -> RESP 0xC1 ASCII reply
(enabled/detected/active/fix/baud/lat/lon/alt_cm/sats/time), parsed into
OffbandGpsStatus (lat/lon /1e6). New GPS-status section in the Location dialog
(live-fix vs stored banner + coords/sats/alt/time). Validated against RedCreek's
feat/gps-state-query test firmware.
#140: the per-minute GPS poll now uses the lightweight 0xC1 query instead of
CMD_APP_START (which re-walked channels + re-drained messages = the BLE re-init
flood); a live fix updates self-lat/lon. Validated on b42 (APP_START ~1/min ->
~0, 0xC1 polls clean every 60s, channel re-walk gone).
Gemini (fix-then-ship): atomic completer-claim in _handleOffbandGps to shrink
the stale-reply race; full elimination needs a protocol sequence id, but the
poll shares in-flight via the re-entrancy guard and the query button is disabled
during a request, so concurrent requests don't occur in practice. The hardcoded
snackbars Gemini flagged in _editLocation are pre-existing l10n debt, not
introduced here; all new strings are localized.
Closes#135Closes#140
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Parse the device-info reply's readable strings (build date / model / firmware
version, NUL-terminated after the 8-byte header) and show firmwareVersion +
deviceModel in Settings → Device Info. Raw strings are logged on connect.
End-anchored field mapping (deviceInfoFields) keeps the version correct on
partial frames.
Gemini (fix-then-ship): removed the unused deviceBuildDate field/getter (dead
state) — the build date stays in the connect log via the raw strings, and
deviceInfoFields still parses + tests it.
Closes#134
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Reply long-press drops the cursor into the composer (post-frame focus). (#131)
- "Reply with route" sends `@[sender] ↩ N hops · via <path>`, byte-truncated with `…`, Cyr2Lat-aware. (#106)
Gemini (fix-then-ship): the unawaited `sendChannelMessage` in `_sendRouteReply` mirrors the established `_sendMessage` convention — failure surfaces via the visible message's delivery status, not the returned Future; holistic channel-send error handling is tracked in #133 per maintainer decision. O(n^2) path truncation is negligible on the <=160-byte payload; the `w<1` guard is a defensive div-by-zero (pathHashByteWidth is 1-3).
Closes#131Closes#106
Part of #132
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Packet Path mis-identified repeaters: a 2-byte path hash like 6A3D was
sliced into two 1-byte hops (6A + 3D), so the first byte collided with an
unrelated repeater (Freemasons 6A..) and the second matched nothing
("Unknown Repeater").
- meshcore_protocol: realHopCount() converts the firmware path BYTE length
to true hops via the device hash width.
- channel_message_path_screen: slice/count/match at the device
pathHashByteWidth (not the unreliable per-message high-bits); bucket and
match on the full w-byte hash (mirrors _pathMatchesContact), not hash[0].
- channel_chat_screen: same width fix on the per-message via-line + hop badge.
- settings: show the build number alongside the version name.
- bump 1.1.2-beta.4+36.
- test: realHopCount regression coverage.
Gemini review (llm-consult): fix-then-ship; 2 findings clarification-only
(_formatHash is canonical hex used identically both sides; pathHashByteWidth
is static per-connection).
Part of epic #112.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Strycher