The bottom-anchored SnackBar sat on top of the chat composer. A SnackBar is
positioned by its Scaffold and can only be raised with a near-full-height
bottom margin, which (per Flutter's ClipRect + heightFactor reveal) delays the
content until the end of the animation and makes the whole screen a hit
target, so this renders through the root Overlay instead.
showDismissibleSnackBar keeps its name and every existing call site. Its
parameter list is trimmed to the four callers actually pass; the rest were
used by nobody, so any future use is now a compile error rather than a
silently ignored argument. persist is preserved: the sender-error path relies
on it to keep an error on screen until read.
Also routes the two composer-screen block confirmations and the five inline
ScaffoldMessenger call sites through the helper so placement is consistent
where a composer exists.
Gemini review: nested-InkWell splash on a dismissing swipe fixed; the
route-scoping finding did not apply (MaterialApp installs one root
ScaffoldMessenger, app.dart:1047, and this app has no nested one, so the old
SnackBars already outlived route pops); replace-instead-of-queue is
deliberate and noted on #522.
Agent: TurquoiseBridge (session 82d77b2f)
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Unifies the previously-duplicated send timestamps (frame builder vs outgoing
message each called now() separately) into one monotonic-per-channel value, so
every channel send has a unique (ts, channel_idx) key. That is the client-side
guarantee the 0xC6 correlation needs (VioletBarn caught that AES-128-ECB
determinism would otherwise make two same-second messages a wrong-hash query).
Adds transient onAirHash + coreScopeObserverCount to ChannelMessage. Part of #524.
Agent: QuietSnow (session 31eaba02)
Follow-up to #457. Swept the em-dash character (U+2014) out of the test
tree (test descriptions and comments) and cleaned 8 em-dashes that
landed in lib comments via the #456 refactor after #457 merged, so the
tree is back to zero. Same rules: replaced with commas/colons/periods,
preserved the lone "no data" glyph placeholders, left non-English ARB
untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Profile is now a container of capability-scoped sections (schema_version 2):
- wifi (WifiConfig) — any wifi device
- mqtt (MqttSection = region + status_interval + brokers) — observer capability
so MQTT is defined once and shared by observer / observer-repeater /
observer-companion, never redone per device. Future radio/repeater/companion/
display sections slot in alongside.
Parser reads the sectioned YAML and rejects the old flat v1 layout with a clear
message. Enumerator reads from sections but emits the SAME firmware keys, so
apply/diff/screens are unchanged. 45 config-profile tests updated + green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ben's style rule: no em-dash character in copy, docs, or code comments
(it reads as an AI tell), and the repo is going public. Replaced the
em-dashes in code comments and English UI strings with commas, colons,
or periods, whichever reads best. User-facing strings were hand-tuned
for natural punctuation rather than a blanket comma.
Preserved the lone "no data" glyph placeholders (a standalone dash used
as a not-available indicator in status displays); those are a design
element, not prose.
Regenerated app_localizations*.dart from app_en.arb (the English
fallback for untranslated keys propagates to every locale's generated
file). Non-English ARB translations left untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- config_profile_diff.dart: pure current->new diff builder (add/change,
drops no-ops, flags danger + secret rows). 4 tests.
- splitProfileWrites: partitions writes into safe vs credential/identity for
the two-tier apply; a mixed broker splits, enabled rides the safe half only.
- ConfigProfilePreviewScreen: full sub-screen — reads current state, renders
the diff (amber overwrites, red danger section), normal Apply for plain
config + a separate red gate (with confirm dialog listing exactly which
credential/identity values change) for the danger set. Secrets masked.
Re-diffs after apply for partial-save recovery.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Device-agnostic write enumerator (config_profile_writes.dart): a profile ->
ordered flat writes + per-broker field maps. Skips null/empty (never clobbers),
skips jwt_token (live-minted), holds enabled out for last-write, flags the
danger set (username/password/jwt_owner/jwt_email + wifi.pwd) for #406's gate.
Observer executor (observer_apply_service.dart): flats via setFlat, brokers via
the existing saveBroker (disable-first, fields, enabled LAST, stop-on-error
partial-safe #80); reads current enabled to preserve it when a profile omits it.
Result labels name keys/slots only, never values (no secret leak).
8 enumerator tests. Executor is thin orchestration over the tested service;
end-to-end covered by #408 hardware.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Address 3 review findings (all confirmed real): thread section context through
the optional-field accessors so nested errors name the broker (brokers[i]."port"),
reject broker ports outside 1..65535, and reject negative integer fields
(status_interval, jwt_refresh) via a shared _optUint. +3 tests (14 total).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds the yaml dependency and parseConfigProfile(): YAML -> ConfigProfile
(#402). Strict by design since profiles are untrusted input (#139) — unknown
keys, wrong types, out-of-range/duplicate broker slots, and unknown
transport/auth values all throw ConfigProfileFormatException with a
user-facing message. Only keys present populate the model. 11 unit tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reactions stored only a Map<String,int> of emoji to count, so "who
reacted" was unanswerable and MeshCore One's tap-to-see-who had nothing
to show against. This captures the reactor for every reaction, both our
own r: format and the PocketMesh / MeshCore One format.
Data layer only. The tap-a-badge-to-see-who UI is a separate follow-on;
this makes the data available and does not change any screen.
Additive by design. A new reactionSenders field (Map<String,List<String>>,
emoji -> reactor names) sits alongside the existing count map, serialised
under a new JSON key. Both maps are always written. An older build reading
a newer store ignores the unknown key and still gets correct counts from
reactions; it never hits the hard `value as int` cast that would fail the
whole message-list load (the #355 data-loss shape). Records written before
this field load with an empty sender map, so their counts survive with
names simply absent.
- ChannelMessage + Message: new reactionSenders field, constructor,
copyWith
- both stores: serialise the new key; deserialise via a shared
ReactionHelper.reactionSendersFromJson that returns empty for a missing
key and skips malformed entries rather than throwing
- applyReaction: records the reactor and dedups per reactor per emoji.
This is persistent dedup (survives restart), unlike the connector's
in-memory processed-set. A pre-existing count with no sender list is
incremented from its stored value, not recomputed from the partial
list, so old counts are preserved.
- connector: threads the reactor name into all reaction paths. Channel
uses the frame sender; a room resolves the author via
fourByteRoomContactKey; an outgoing reaction is attributed to self.
- pending queue: retry now hands the stored reactor to its callback
Tests: reactor capture, two-reactor count, same-reactor no-double-count,
pre-#383 count preservation, and JSON round-trip + backward-compat +
malformed-entry handling for the new field. Full suite 604 passing.
Epic #376.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two of three Gemini findings held up against the code; the third did not.
Accepted, message-swallow risk: the emoji check looked only at the first
rune against a range list that included arrows, so a multi-line message
beginning with an arrow and ending in eight Crockford characters would
have been consumed and displayed as a reaction whose "emoji" was the
whole sentence. Ben's own capture has U+2192 mid-sentence in ordinary
channel traffic, so this was reachable, not theoretical.
- drop U+2190-U+21FF and U+2934-U+2935; arrows carry the Unicode Emoji
property but read as punctuation in prose
- cap the emoji segment at 8 runes, which is clear of the longest ZWJ
sequence and nowhere near a sentence. This is the guard that holds
regardless of how the range list evolves.
Accepted, dedup: the contact path keyed on target hash plus emoji only.
A room server is many-party over the 1:1 transport, so two members
sending the same emoji collapsed into one and the count stuck at 1, the
same defect already fixed on the channel path. The reacting author
prefix is now part of the key; in a true 1:1 it is empty and the key is
unchanged.
Rejected, room-server sender matching: the review claimed getSenderName
resolves to the room itself and that room text carries a "Sender: "
prefix. Neither is true. _resolveContactSenderName resolves the author
via fourByteRoomContactKey to the real per-sender contact name, and room
message text is stored bare with the author in its own field. One real
sub-case survives: an author who is not in our contacts resolves to null
and will not match, which degrades to queue-then-expire with a warn log.
Also rejected: switching @[ lookup from first to last occurrence. The
reference implementation uses the first, and diverging risks mismatching
payloads it accepts.
Reactions sent from MeshCore One arrived as junk text: an emoji line
followed by an 8-character token such as "dyps6yf0". Those tokens are
Crockford Base32 target-message hashes, the second line of a two-line
reaction payload we did not recognise.
Receive-side only. Offband keeps sending its own r:hhhh:ii format; their
client already parses ours, so nothing about what we transmit changes.
Wire format (confirmed against a live capture, see #378):
channel: {emoji}@[{targetSender}]\n{hash}
direct: {emoji}\n{hash}
hash: sha256(body utf8 + timestamp uint32 LE seconds)[0:5],
Crockford Base32, 8 chars, lowercase
The body is hashed without the channel "SenderName: " prefix, which is
why the sender travels in @[...] instead.
- crockford_base32.dart: encode and normalise, 12-bit accumulator so the
web target's 32-bit bitwise ops cannot truncate a 40-bit value
- pocketmesh_reaction.dart: hash and a parser mirroring the reference
implementation, with a conservative leading-emoji check so a real
message is never swallowed
- reaction_helper.dart: ReactionInfo carries a dialect; applyReaction
picks the matching hash and, for the channel form, requires an exact
sender-name match (a node name can carry emoji and variation
selectors)
- pending_reactions.dart: a reaction arriving before its target is held
and retried rather than silently dropped, bounded at 50 entries with a
15 minute TTL and a warn-level log on expiry (closes the silent-drop
path in #382)
- the channel dedup key now includes the reacting sender, so two people
sending the same emoji no longer collapse into one
- notification tray summarises the foreign format as a reaction instead
of showing the raw token
Known limitation: on channels with Smaz or Cyr2Lat enabled the wire text
differs from the text we store, so a hash computed by another client
will not match. Flagged for a decision rather than worked around.
Epic #376. Fast-follow #383 adds reactor identity.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Pasted GIF links rendered as plain text because parseGif only matched the
compact forms. Adds GifHelper.resolveGifUrl, which maps any supported payload
to the URL that renders it, and widens coverage to the links people actually
paste.
Allowlist is deliberately narrow, Giphy and Tenor only. Off-list URLs return
null and stay plain tap-to-open links, never auto-fetched: auto-loading a
stranger's URL leaks the viewer's IP and enables tracking-pixel abuse, and
inline-rendering unmoderated hosts is a malware and inappropriate-content
vector. Tests pin the rejections, including a lookalike host
(giphy.com.evil.example) and a general image host (imgur).
Newly rendered:
- i.giphy.com/<id>.gif and .webp, the form a browser copy produces
- media.tenor.com and c.tenor.com direct assets
A tenor.com/view/<slug>-<id> PAGE url is deliberately NOT matched. The modern
Tenor CDN path uses an opaque hash that cannot be derived from the page id, so
resolving one requires the Tenor API and a key. Such a link stays plain rather
than silently rendering the wrong image. Supporting it is a separate decision.
Also removes the hardcoded 'https://media.giphy.com/media/$gifId/giphy.gif'
literal duplicated across all four render call sites. That duplication is the
same drift that caused the #284 notification regression, where a second
hand-rolled copy of GIF detection went stale.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The picker emitted `g:<id>`, a convention that exists only in this Flutter
client lineage's parseGif (inherited from upstream, not a MeshCore protocol
feature). A recipient on stock or any non-lineage client has no way to expand
it, so a GIF arrived as opaque text (#223).
encodeGif now emits `https://giphy.com/gifs/<id>`, a form parseGif already
matches, so:
- stock clients receive a tappable URL they can actually open
- Offband keeps rendering inline with no render-side change
- legacy `g:<id>` payloads still decode, back-compat unchanged
Cost is ~41B vs ~20B against a ~160B payload. A full message carrying sender
prefix + reply mention + URL measures ~79B, roughly half the cap.
Checked, and did NOT change, the outbound structured-payload guard in
prepareContactOutboundText/prepareChannelOutboundText: Smaz.encodeIfSmaller
declines to compress a URL (base64 overhead exceeds the dictionary gain) and
Cyr2Lat passes unmapped ASCII through, so a GIF URL survives intact without
widening the guard. Both pinned as regression tests instead.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every received DM/channel message now logs arrival wall-clock vs the
sender-claimed payload timestamp (delta + TIME ANOMALY marker beyond
24h), routed directly to AppDebugLogService so the rotating on-disk
trail is unconditional. Models persist a nullable rxTime set at every
live ingest construction site; legacy stored records stay null.
Diagnostic child of #280.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two shared-root render gaps (message tokens were only matched at fixed
positions):
- TranslatedMessageContent: parse @[Name] anywhere (leading, inline, or
repeated) and render each as a chip; messages without a mention keep full
link support (#233).
- GifHelper.parseGif: strip a leading `@[Name] ` reply prefix before matching
so a reply-with-gif resolves to the gif instead of literal text; arbitrary
text before a gif is still left as text (#232).
Tests: parseGif reply/format cases + widget tests for inline/leading/multiple
mention chips. Full suite 402 green.
Part of #233, #232.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The trace was width-1 end to end (flags=0, a 1-byte path, and a
1-byte-per-hop parse + render), so on a 2-/3-byte path-hash mesh it
returned 1-byte hops (`6A`, not `6Axx`) and failed to route where a
1-byte prefix is ambiguous ("Path trace not available").
- Send: path_sz = floor(log2(width)); build width-byte hops — the
repeater/room "Ping" prefixes (contacts_screen), the round-trip
buildPath (now mirrors by hop, not byte), and the map trace builder.
- Parse: read the flag byte for the hop width, group the hash bytes into
packed width-byte hops, key contacts by the full prefix, 1 SNR per hop.
- Render: list panel + markers + map points iterate packed hops, labelled
at the configured width.
PathHelper gains tracePathSz / traceHopBytes / packPrefix / tracePathHops
/ buildTraceRoundTrip, all unit-tested (incl. width-2 hop mirroring).
Bumps build to +47 for the b47 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHelper.formatPathHex / resolvePathNames assumed 1 byte per hop, so the
direct-chat "full path" and path-management dialogs rendered routing paths
per-byte (84,AB instead of 84AB) and resolved hop names by a single byte on
2-/3-byte path-hash meshes. Group bytes into pathHashByteWidth-sized hops and
match hop names by the full-width prefix.
- formatPathHex(bytes, width) / resolvePathNames(bytes, contacts, width) group
into width-byte hops (trailing partial hop kept); name match uses the full
hop prefix.
- chat_screen + path_management_dialog pass connector.pathHashByteWidth.
analyze clean; 7 PathHelper tests (incl. width-2 collision-avoidance); Gemini: ship.
Closes#154
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings onChanged/onTap callbacks fire-and-forgot AppSettingsService Future<void> setters, so a persist failure rejected unhandled and was swallowed. Add a shared persistSetting(context, action) helper that awaits the setter in a try/catch and shows a dismissible error SnackBar, capturing the messenger before the await so it survives a picker-dialog pop. Wrap the 27 onChanged/onTap setter sites in app_settings_view + message_settings_view; setAppDebugLogEnabled and setNotificationsEnabled (which await + show their own confirmation) get an inline try/catch instead.
Covers the two onChanged panes; the settings_screen action flows (GPX export, location dialogs, version-info mounted guard) follow in a second pass, so #28 stays open. Error strings are English for now (separate settings l10n sweep).
Adds a persistSetting widget test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the typed text anywhere in the shortcode name (not just the prefix),
ranked exact > prefix > substring, so `:check` surfaces the checkmarks (✅ is
`white_check_mark`). Add check/checkmark/tick aliases for ✅ in a separate,
regen-safe map the chat + channel composers consume.
Closes#45
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The maintainer's keyboard can't type emoji, so the composer now accepts
:shortcode: input with an inline autocomplete:
- Type `:` to open a bottom-anchored picker; arrows/Tab/click select, Esc
dismisses. Best/exact match sits at the bottom, nearest the caret.
- Enter completes an unambiguous emoji (single OR exact match) then sends,
so `:rofl` + Enter ships the glyph, not the literal text. Ambiguous
matches still send raw; Tab picks one deliberately.
- A completed `:name:` (closing colon) auto-converts in place.
- 1913 gemoji shortcodes bundled (lib/helpers/emoji_shortcodes.dart, MIT).
- Byte-count aware via the existing ByteCountedTextField; shares the
MentionAutocompleteField with @-mention input (both composers wired).
Version 9.0.0+12 -> 9.1.0+14 (MINOR feature; build kept monotonic after
the rebrand's +13 on the parallel chore/offband-rebrand branch).
Grid/tap picker deferred (#5 follow-up).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The telemetry parser has been expanded and should now support significantly more metrics. It has been ported from the Python implementation of meshcore_py.
- Pass initialUnreadCount to chat screens before markRead clears it
- Use two-phase scroll: jumpTo estimated offset to build lazy items,
then ensureVisible for precise positioning
- Await ensureVisible before clearing scroll guard to prevent
scrollToBottomIfAtBottom from overriding the animation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
this adds a generator showDismissibleSnackBar which by default allows
tapping to clear snack bar toasts. all SnackBar properties are still
available and the
all callers should now use showDismissibleSnackBar() instead of calling
ScaffoldMessenger.of(context).showSnackBar(SnackBar())
- Companion radio stats: poll and display noise floor, RSSI, SNR, airtime
with dedicated ValueNotifier and ref-counted polling
- Adaptive RF-aware TX backoff based on radio conditions instead of fixed 5s
- Variable-width path hash support (1-3 bytes per hop)
- Air activity dot indicator in app bar with tap to open stats screen
- Jump to oldest unread setting for chat screens
- 1s send cooldown on DM and channel messages
- Link style: theme-aware orange, added EmailLinkifier
- New languages: Hungarian, Japanese, Korean
- Remove dead DeviceScreen and BatteryIndicatorChip
- Remove wakelock_plus dependency
- TX power fields now read as signed int8
- Implemented radio statistics features in multiple screens including chat, channels, and settings.
- Added localization for new strings in Swedish, Ukrainian, and Chinese.
- Introduced a setting to jump to the oldest unread message in chat and channels.
- Enhanced path management and display for contacts and messages.
- Updated app settings to include new boolean for jumping to the oldest unread message.
- Improved battery indicator and radio stats display in the app bar.
- Removed unused wakelock_plus dependency and updated plugin registrations.
* Refactor Cayenne LPP parsing with error handling and logging
- Added error handling and logging to the Cayenne LPP parsing methods to manage malformed data gracefully.
- Improved the structure of the parsing logic for better readability and maintainability.
- Updated the Contact model to include error handling during frame parsing.
- Refactored Channels, Contacts, Map, and Neighbours screens to utilize a new AppBarTitle widget for consistent app bar design.
- Enhanced the BatteryIndicator widget to display SNR information for direct repeaters.
- Introduced SNRUi class for better management of SNR icon and text representation.
- Improved error handling in PathTraceMap and Neighbours screens to log errors appropriately.
* Fix trace route bytes generation logic in Contact model
* Ignore advertisements from self in MeshCoreConnector
* Refactor PathTraceData to use List<double> for snrData and adjust data mapping in PathTraceMapScreen
* Add SNRIndicator to AppBar and refactor BatteryIndicator layout
* Enhance path management dialog to display direct repeaters with color coding based on signal strength
* Remove unused import from SNR indicator widget
* Update lib/models/contact.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/screens/path_trace_map.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/widgets/battery_indicator.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/helpers/cayenne_lpp.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Refactor packet handling to skip only the RSSI byte for improved reliability
* Add SNR indicator localization and update UI references for nearby repeaters
* Handle loading state and error parsing in PathTraceMapScreen; update SNR indicator dialog content layout
* Throw an exception for unsupported LPP types in CayenneLpp class
* Refactor AppBarTitle widget to remove unused style parameter; update related screens to reflect changes
Improve SNR handling by adding validation for spreading factor range in snrUiFromSNR function
Update contact handling in MeshCoreConnector to fix variable naming and improve readability
Stop parsing unsupported LPP types in CayenneLpp to avoid misalignment
* Sort direct repeaters by last updated time and SNR; limit to top three for improved path management dialog
* Prevent notifications for chat and sensor adverts without a valid path
* Implement ranking system for direct repeaters based on SNR and recency; update related UI components to reflect changes
* Refactor localization keys for "neighbors" terminology across multiple languages
- Updated localization keys from "neighbours" to "neighbors" in the following files:
- app_localizations_bg.dart
- app_localizations_de.dart
- app_localizations_en.dart
- app_localizations_es.dart
- app_localizations_fr.dart
- app_localizations_it.dart
- app_localizations_nl.dart
- app_localizations_pl.dart
- app_localizations_pt.dart
- app_localizations_ru.dart
- app_localizations_sk.dart
- app_localizations_sl.dart
- app_localizations_sv.dart
- app_localizations_uk.dart
- app_localizations_zh.dart
- Updated corresponding ARB files to reflect the changes in keys.
- Renamed the NeighboursScreen to NeighborsScreen in the chat and repeater hub screens for consistency.
* Adjust ranking calculation for direct repeaters by adding offset to SNR for improved accuracy
* Fix typo in variable name for second direct repeater in path management dialog
* Refactor ranking calculation for direct repeaters and update path handling in channel message screens
* Refactor path handling in ChannelMessagePathScreen to improve logic for outgoing messages and channel messages
* Fix AppBarTitle horizontal overflow with long titles (#187)
* Initial plan
* Wrap title Column in Expanded to prevent horizontal overflow in AppBarTitle
Co-authored-by: wel97459 <12990640+wel97459@users.noreply.github.com>
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: wel97459 <12990640+wel97459@users.noreply.github.com>
* Refactor AppBarTitle widget to simplify Text widget initialization
* Add "Show All Paths" feature to chat path management
- Implemented localization for "Show All Paths" in multiple languages (DE, EN, ES, FR, IT, NL, PL, PT, RU, SK, SL, SV, UK, ZH).
- Updated path management dialog to include a toggle for showing all paths.
- Refactored path history display logic to conditionally show paths based on the toggle state.
- Cleaned up unused print statements and improved code readability in path tracing and chat screens.
* Refactor FeatureToggleRow visibility in chat and path management dialogs based on repeaters list
* Remove unused import of 'dart:ffi' in path_trace_map.dart
* Refactor repeater management logic and update UI state handling in chat and path management dialogs
* Refactor RX data handling and improve repeater management logic in chat and path management dialogs
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Copilot <198982749+Copilot@users.noreply.github.com>
Co-authored-by: wel97459 <12990640+wel97459@users.noreply.github.com>
formats all dart files using `dart format .` from the root project dir
this makes the code style repeatable by new contributors and makes PR review easier
- Reduce reaction payload from ~44 bytes to 9 bytes (5x smaller)
- Use 4-char hex hash (timestamp + sender + first 5 chars) for message ID
- Use 2-char hex emoji index instead of multi-byte UTF-8 emoji
- Format: r:HASH:INDEX (e.g., r:a1b2:00)
- For 1:1 chats, sender is implicit (null) for shorter hash
- Prevent users from reacting to their own messages
- Add room server reaction support with sender identification
- Make emoji lists public in EmojiPicker for shared indexing
- Add 💪 and 🚀 emojis to picker
- Add comprehensive unit tests for reaction helpers
- Update minor dependencies
- Implemented ChatScrollController to manage scroll behavior and visibility of jump-to-bottom button.
- Added functionality to automatically scroll to the bottom when the keyboard opens.
- Created JumpToBottomButton widget that appears when the user scrolls up, allowing quick navigation back to the bottom of the chat.
- Added flutter_linkify package to auto-detect and linkify URLs in chat messages.
- Implemented LinkHandler class to manage link tap confirmations and URL launching.
- Updated chat_screen.dart to use Linkify for displaying message text with links.
- Registered url_launcher plugin for handling URL launches across platforms.
- Updated pubspec.yaml and pubspec.lock to include new dependencies.
- Cleaned up untranslated.json by removing unused translations.
- Move BufferReader/BufferWriter into meshcore_protocol.dart
- Refactor build functions to use BufferWriter
- Add content-based validation for CLI responses over LoRa
- Add individual refresh buttons for TX power and feature toggles
- Hide unimplemented features (Privacy Mode, Encrypted Advert Interval)
Core Features
Unread Message Tracking: Added persistent unread counts for contacts and channels with visual badges
Message Deletion: Users can now long-press to delete individual messages in chats and channels
SMAZ Compression: Added per-contact compression settings (previously only channels)
UTF-8 Length Limiting: Text inputs now enforce protocol byte limits correctly
Channel Message Paths: New screen to visualize packet routing through repeater network with map view
Protocol Updates
Added maxContactMessageBytes() and maxChannelMessageBytes() helpers for message length validation
Changed channel PSK format from Base64 to Hexadecimal (breaking change)
Added app version field to connection handshake frame
UI Improvements
Unread badges on all contact and channel list items
Enhanced message bubbles with path visualization for channel messages
Character count displays in message input fields
Improved repeater CLI screen functionality
New Files
lib/storage/unread_store.dart - Unread tracking persistence
lib/storage/contact_settings_store.dart - Per-contact SMAZ settings
lib/widgets/unread_badge.dart - Unread count indicator
lib/helpers/utf8_length_limiter.dart - Byte-aware text input formatter
lib/screens/channel_message_path_screen.dart - Packet path visualization
Open-source Flutter client for MeshCore LoRa mesh networking devices.
Features:
- BLE device scanning and connection
- Nordic UART Service (NUS) integration
- Material 3 design with system theme support
- Provider-based state management
- Placeholder screens for chat, contacts, and settings
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
diffwireauto
Strycher
HDDen
zjs81
Dmitry Polshakov
ericz
Enot (ded) Skelly
Adam Novak
zjs81
Winston Lowe
446564
Zach
