DIrect start/stop and more backup

main.c

@@ -131,10 +131,19 @@ static THD_FUNCTION(Thread1, arg)
   while (1) {
 //  START_PROFILE
     if (sweep_mode&(SWEEP_ENABLE|SWEEP_ONCE)) {
-//      if (dirty)
+
       backup.frequency0 = setting.frequency0;
       backup.frequency1 = setting.frequency1;
-        completed = sweep(true);
+      if (setting.auto_attenuation)
+        backup.attenuation = 0;
+      else
+        backup.attenuation = setting.attenuate_x2+1;
+      if (setting.auto_reflevel || setting.unit != U_DBM)
+        backup.reflevel = 0;
+      else
+        backup.reflevel = setting.reflevel + 140;
+
+      completed = sweep(true);
       sweep_mode&=~SWEEP_ONCE;
     } else if (sweep_mode & SWEEP_SELFTEST) {
       // call from lowest level to save stack space
@@ -925,6 +934,10 @@ config_t config = {
 #endif
   .sweep_voltage = 3.3,
   .switch_offset = 0.0,
+#ifdef TINYSA4
+  .direct_start = 9650000000UL,
+  .direct_stop  = 9850000000UL,
+#endif
 };
 
 //properties_t current_props;
@@ -2454,13 +2467,24 @@ int main(void)
   if (caldata_recall(0) == -1) {
     load_LCD_properties();
   }
-
+  {backup_t b = backup;
   if (backup.frequency0 != 0 || backup.frequency1 != 0) {
     setting.frequency0 = backup.frequency0;
     setting.frequency1 = backup.frequency1;
     update_frequencies();
+    if (backup.attenuation == 0)
+      set_auto_attenuation();
+    else {
+      set_attenuation((backup.attenuation - 1)/2.0);
+    }
+    if (backup.reflevel == 0)
+      set_auto_reflevel(true);
+    else {
+      set_auto_reflevel(false);
+      user_set_reflevel(((float)backup.reflevel)-140.0);
+    }
+  }
   }
-
   set_refer_output(-1);
 //  ui_mode_menu();       // Show menu when autostarting mode
   ui_mode_normal();

nanovna.h

@@ -28,14 +28,14 @@
 #define TINYSA4_PROTO
 #endif
 
-//#ifdef TINYSA_F072
+#ifdef TINYSA_F072
 #ifdef TINYSA_F303
 #error "Remove comment for #ifdef TINYSA_F072"
 #endif
 #ifndef TINYSA3
 #define TINYSA3
 #endif
-//#endif
+#endif
 // Need enable HAL_USE_SPI in halconf.h
 #define __USE_DISPLAY_DMA__
 
@@ -129,8 +129,8 @@
 //#define LOW_MAX_FREQ         800000000ULL
 #define MIN_BELOW_LO         550000000ULL
 #ifdef __NEW_SWITCHES__
-#define DIRECT_START 965000000ULL
-#define DIRECT_STOP  985000000ULL
+#define DIRECT_START config.direct_start
+#define DIRECT_STOP  config.direct_stop
 #endif
 #endif
 /*
@@ -455,9 +455,17 @@ extern void tlv320aic3204_select(int channel);
 
 #endif
 
+#pragma pack(push)
+#pragma pack(1)
+
 typedef struct {
-  freq_t    frequency0, frequency1;
+  uint32_t    frequency0, frequency1;
+  uint32_t attenuation;
+  int32_t reflevel;
+//  uint8_t RBW;
+//  uint8_t mode;
 } backup_t;
+#pragma pack(pop)
 
 #define backup (*(backup_t *)0x40002850)   // backup registers 5 * 32 bits
 
@@ -696,6 +704,8 @@ typedef struct config {
 #endif
 #ifdef __ULTRA__
   freq_t ultra_threshold;
+  freq_t direct_start;
+  freq_t direct_stop;
   int8_t    ultra;
 #endif
   uint8_t   _mode;

ui_sa.c

@@ -438,6 +438,10 @@ enum {
   KM_NF,
 #endif
   KM_LINEAR_SCALE,
+#ifdef TINYSA4
+  KM_DIRECT_START,
+  KM_DIRECT_STOP,
+#endif
   KM_NONE // always at enum end
 };
 
@@ -502,6 +506,10 @@ static const struct {
 [KM_NF]           = {keypads_plusmin     , "NOISE\nFIGURE"}, // noise figure of tinySA
 #endif
 [KM_LINEAR_SCALE] = {keypads_plusmin     , "SCALE"}, // scale for linear units
+#ifdef TINYSA4
+[KM_DIRECT_START] = {keypads_freq        , "DIRECT\nSTART"}, // KM_DIRECT_START
+[KM_DIRECT_STOP]  = {keypads_freq        , "DIRECT\nSTOP"}, // KM_DIRECT_STOP
+#endif
 };
 
 #if 0 // Not used
@@ -2695,6 +2703,8 @@ static const menuitem_t menu_settings4[] =
 #endif
   { MT_ADV_CALLBACK,     0,     "LINEAR\nAVERAGING",          menu_linear_averaging_acb},
 //  { MT_SUBMENU,  0,             S_RARROW" MORE",     menu_settings3},
+  { MT_KEYPAD,   KM_DIRECT_START,     "DIRECT\nSTART", ""},
+  { MT_KEYPAD,   KM_DIRECT_STOP,     "DIRECT\nSTOP", ""},
   { MT_NONE,     0, NULL, menu_back} // next-> menu_back
 };
 #endif
@@ -3159,6 +3169,14 @@ static void fetch_numeric_target(uint8_t mode)
     uistat.freq_value = config.ultra_threshold;
     plot_printf(uistat.text, sizeof uistat.text, "%3.6fMHz", uistat.freq_value / 1000000.0);
     break;
+  case KM_DIRECT_START:
+    uistat.freq_value = config.direct_start;
+    plot_printf(uistat.text, sizeof uistat.text, "%3.6fMHz", uistat.freq_value / 1000000.0);
+    break;
+  case KM_DIRECT_STOP:
+    uistat.freq_value = config.direct_stop;
+    plot_printf(uistat.text, sizeof uistat.text, "%3.6fMHz", uistat.freq_value / 1000000.0);
+    break;
 #endif
 #ifdef __LIMITS__
   case KM_LIMIT_FREQ:
@@ -3319,6 +3337,14 @@ set_numeric_value(void)
     config_save();
     ultra_threshold = config.ultra_threshold;
     break;
+  case KM_DIRECT_START:
+    config.direct_start = uistat.value;
+    config_save();
+    break;
+  case KM_DIRECT_STOP:
+    config.direct_stop = uistat.value;
+    config_save();
+    break;
 #endif
 #ifdef TINYSA4
   case KM_EXP_AVER: