stored trace now also saved to flash

flash.c

@@ -166,6 +166,14 @@ caldata_save(int id)
     dst++;
   }
 
+  // Flash stored trace
+  count = sizeof(stored_t) /  sizeof(uint16_t);
+  src = (uint16_t*)&stored_t[0];
+  while (count-- > 0) {
+    flash_program_half_word((uint32_t)dst, *src++);
+    dst++;
+  }
+
   /* after saving data, make active configuration points to flash */
 //  active_props = (setting_t*)saveareas[id];
   lastsaveid = id;
@@ -187,7 +195,7 @@ caldata_recall(int id)
 
   if (src->magic != CONFIG_MAGIC)
     return -1;
-  if (checksum(src, sizeof *src - sizeof src->checksum) != src->checksum)
+  if (checksum(src, sizeof setting - sizeof src->checksum) != src->checksum)
     return -1;
 
   /* active configuration points to save data on flash memory */
@@ -196,6 +204,9 @@ caldata_recall(int id)
 
   /* duplicated saved data onto sram to be able to modify marker/trace */
   memcpy(dst, src, sizeof(setting_t));
+  // Restore stored trace
+  memcpy(stored_t, &src[1], sizeof(stored_t));
+
   update_frequencies();
   set_scale(setting.scale);
   set_reflevel(setting.reflevel);

nanovna.h

@@ -563,8 +563,8 @@ typedef struct setting
   marker_t _markers[MARKERS_MAX];
   int8_t _active_marker;
   int8_t unit;
-  uint32_t checksum;
   float offset;
+  uint32_t checksum;
 }setting_t;
 
 extern setting_t setting;

sa_core.c

@@ -484,7 +484,7 @@ void set_mode(int m)
 void apply_settings(void)
 {
   if (setting.mode == M_HIGH)
-    PE4302_Write_Byte(40);
+    PE4302_Write_Byte(40);  // Ensure defined input impedance of low port when using high input mode (power calibration)
   else
     PE4302_Write_Byte(setting.attenuate * 2);
 #if 0