AM modulation repaired

main.c

@@ -993,9 +993,9 @@ config_t config = {
   .high_correction_frequency = { 240000000, 280000000, 300000000, 400000000, 500000000, 600000000, 700000000, 800000000, 900000000, 960000000 },
   .high_correction_value = { 0, 0, 0, 0, 0.0, 0, 0, 0, 0, 0 },
   .setting_frequency_10mhz = 10000000,
-  .cor_am = -8,
+  .cor_am = -10,
-  .cor_wfm = -15,
+  .cor_wfm = -18,
-  .cor_nfm = -15,
+  .cor_nfm = -18,
   .ext_zero_level = 128,
 #endif
 #ifdef TINYSA4
@@ -1012,7 +1012,7 @@ config_t config = {
   .high_correction_frequency = { 10000, 100000, 200000, 500000, 50000000, 140000000, 200000000, 300000000, 330000000, 350000000 },
   .high_correction_value = { 0, 0, 0, 0, 0.0, 0, 0, 0, 0, 0 },
   .setting_frequency_30mhz = 30000000,
-  .cor_am = -5,
+  .cor_am = -14,
   .cor_wfm = -55,
   .cor_nfm = -55,
   .ultra = false,

sa_core.c

@@ -2365,7 +2365,8 @@ pureRSSI_t perform(bool break_on_operation, int i, freq_t f, int tracking)     /
           a = -31.5;
         a = -a;
 #ifdef __PE4302__
-        PE4302_Write_Byte((int)(a * 2) );
+        setting.attenuate_x2 = (int)(a * 2);
+        PE4302_Write_Byte(setting.attenuate_x2);
 #endif
       }
     }

ui_sa.c

@@ -872,6 +872,7 @@ static UI_FUNCTION_ADV_CALLBACK(menu_measure_acb)
   switch(data) {
     case M_OFF:                                     // Off
 //      reset_settings(setting.mode);
+   no_measurement:
       set_measurement(M_OFF);
       break;
     case M_IMD:                                     // IMD
@@ -986,9 +987,9 @@ static UI_FUNCTION_ADV_CALLBACK(menu_measure_acb)
 //        break;
       span = uistat.value;
 #ifdef TINYSA4
-      set_RBW(span/300);
+//      set_RBW(span/300);
 #endif
-      set_sweep_frequency(ST_SPAN, span * 10);
+      set_sweep_frequency(ST_SPAN, span * 5);
 //      update_frequencies();                     // To ensure markers are positioned right!!!!!!
       set_measurement(M_AM);
 #ifndef TINYSA4
@@ -1008,13 +1009,17 @@ static UI_FUNCTION_ADV_CALLBACK(menu_measure_acb)
       kp_help_text = "Frequency of signal";
       ui_mode_keypad(KM_CENTER);
       set_marker_frequency(0, uistat.value);
+#ifdef TINYSA4
+      kp_help_text = "Modulation frequency: 1 .. 10kHz";
+      ui_mode_keypad(KM_SPAN);
+      if (uistat.value < 1000 || uistat.value > 10000)
+        goto no_measurement;
+      set_RBW(uistat.value/100);
+#else
       kp_help_text = "Modulation frequency: 1 .. 2.5kHz";
       ui_mode_keypad(KM_SPAN);
       if (uistat.value < 1000 || uistat.value > 2500)
-        break;
+        goto no_measurement;
-#ifdef TINYSA4
-      set_RBW(uistat.value/300);
-#else
       set_RBW(uistat.value/100);
 #endif
       // actual_rbw_x10