|
|
## Offband MeshCore 1.8.0
|
|
|
|
|
|
A channels release. Message history now belongs to the channel itself, not to the slot it
|
|
|
happens to occupy on your radio, and the app no longer keeps history out of sight where it
|
|
|
could reappear later. Every channel write now waits for the radio to confirm it, adds can't
|
|
|
overwrite another channel, and a radio whose channel storage was wiped can be put back from
|
|
|
the app. Alongside that: control of your radio's own channel sounds, display, status LED and
|
|
|
Bluetooth PIN, a factory reset, and a macOS download.
|
|
|
|
|
|
### Now on iPhone
|
|
|
|
|
|
Offband MeshCore is on the **App Store**:
|
|
|
https://apps.apple.com/us/app/offband-meshcore/id6829124741. It needs iOS 16.4 or newer. The
|
|
|
App Store has 1.7.0 today. 1.8.0 goes up once Apple has reviewed it.
|
|
|
|
|
|
### Which radios get what
|
|
|
|
|
|
- **Any MeshCore companion radio** the app already supported gets the channel changes, the
|
|
|
Bluetooth PIN setting, and Factory Reset.
|
|
|
- **Offband firmware 1.7.0 or newer** is needed for Radio sound per channel, the Display and
|
|
|
LED settings, and display rotation. On other firmware those controls stay hidden.
|
|
|
|
|
|
### Please read before updating
|
|
|
|
|
|
**Hidden history is cleared.** Earlier versions could keep a channel's messages out of sight
|
|
|
after the channel left your radio, and bring them back if the same channel was added again.
|
|
|
1.8.0 stops doing that. The first time it fully syncs with a radio, it deletes the stored
|
|
|
history of any channel that radio no longer holds. Messages for the channels on your radio are
|
|
|
not touched. It only does this after a sync in which the radio answered for every slot. If any
|
|
|
slot was unanswered or erased, or the radio reported no channels at all, nothing is deleted.
|
|
|
If a reflash wipes a radio's channel storage outright, the app recognizes the erased slots,
|
|
|
keeps the history, and offers **Restore to radio** instead (#1128, #1060).
|
|
|
|
|
|
**Slot 0 is kept for Public on every radio.** The app never puts any other channel in slot 0,
|
|
|
which matches Offband firmware 1.7.0. On stock or older firmware, that means one slot goes
|
|
|
unused if you don't have Public. A channel that is already in slot 0 is left where it is
|
|
|
(#1117).
|
|
|
|
|
|
**New text is in English only.** The 65 new messages and labels in this release are English in
|
|
|
every language for now. Translations will follow.
|
|
|
|
|
|
### Channels you can trust
|
|
|
|
|
|
- **History follows the channel.** Messages, unread counts and notification settings are tied
|
|
|
to the channel's key. A channel that moves to another slot keeps them, and the channel that
|
|
|
takes its old slot doesn't inherit them. When a sync finds a different channel in a slot,
|
|
|
the app tells you in a notice you can dismiss (#1063, #1064).
|
|
|
- **The app confirms your channel list before using it.** Channel messages that arrive while
|
|
|
the list is still being confirmed are held and filed once it is, so they can't land in the
|
|
|
wrong channel. A slot the radio never answers for is shown as unknown, with a **Retry sync**
|
|
|
banner. It never borrows the previous list, and it doesn't send notifications. Sending to a
|
|
|
channel the app hasn't confirmed on this connection is refused with a message saying why.
|
|
|
An incomplete sync never overwrites the last fully confirmed list, and a sync that fails
|
|
|
while you're connected retries by itself (#1062).
|
|
|
- **Every channel write waits for the radio.** Adding, editing and deleting a channel now wait
|
|
|
for the radio's answer. Success shows only after the radio confirms. If the radio refuses or
|
|
|
doesn't answer within 5 seconds, a message stays on screen saying what happened, and the
|
|
|
channel's history is kept (#1026).
|
|
|
- **Adds can't overwrite another channel.** The slot is chosen when you press Add, not when the
|
|
|
dialog opened. Adding is refused while a sync is running, or when the radio is full, instead
|
|
|
of silently writing over slot 0. This covers the channels screen, QR shares, joining a
|
|
|
community and config import (#1021, #1022, #1023). A community join shows its green
|
|
|
"joined" message only when the channel was actually written. A config import started during
|
|
|
a sync imports nothing and lists each channel as skipped.
|
|
|
- **Changing a channel's key asks first.** Renaming a hashtag channel or giving a private
|
|
|
channel a new key asks whether to **keep** its message history under the new key or
|
|
|
**delete** it. Keep also carries the channel's phone notification setting. A rename that
|
|
|
keeps the same key asks nothing. If the radio takes the new key but the history can't be
|
|
|
moved, a message says so and the history is kept. If the radio removes the old channel but
|
|
|
refuses the new one, a message says the slot is now empty and to add the channel again
|
|
|
(#1128, #1025).
|
|
|
- **Public stays Public.** It goes in slot 0. It can't be deleted, and trying says why. Its key
|
|
|
can't be edited, and while Public is on the radio no other channel can be given its key.
|
|
|
Typing "public" as a hashtag channel, in any case and with or without the #, adds the real
|
|
|
Public channel instead of a lookalike (#1117, #1029).
|
|
|
- **Hashtag channels in Edit Channel.** The key is shown read-only, with a copy button, and is
|
|
|
recomputed as you rename. A name that stops being a hashtag, or starts with "##", is
|
|
|
refused. For a community hashtag channel, the name and key are both read-only (#1103).
|
|
|
- **Edit Channel refuses a stale save.** If a sync replaced the channel in that slot while the
|
|
|
dialog was open, Save is refused with a message instead of overwriting it (#1103).
|
|
|
- **Restore to radio.** When a radio comes back with its channel storage erased, a banner
|
|
|
offers to write your channels back. It lists only the channels the radio is missing. Public
|
|
|
goes to slot 0, and every other channel goes to its old slot if that's free, or else the
|
|
|
lowest free one. A channel already on the radio is never overwritten. Afterwards it reports
|
|
|
how many channels the radio confirmed, and names any it didn't (#1060, #1117).
|
|
|
- Channels that showed up as rows of replacement characters (<28>) after a radio lost its
|
|
|
channel storage are no longer adopted, and any an earlier version saved are dropped (#1060).
|
|
|
|
|
|
### Notifications
|
|
|
|
|
|
- **Radio sound per channel**: choose whether the radio itself beeps for all messages, mentions
|
|
|
only, or never, or leave it to the radio's own setting. This is separate from your phone's
|
|
|
notifications, and the existing control is now labeled **Phone notifications** so the two
|
|
|
can't be confused. The Radio sound row shows what the channel will actually do: "Follows the
|
|
|
radio" when it's left to the radio, and "Silent" when the radio's own setting is None
|
|
|
(#1068).
|
|
|
- Fixed: a channel you had set to None on the radio could start sounding again after it moved
|
|
|
to another slot. The setting now follows the channel (#1060).
|
|
|
|
|
|
### Your radio's settings
|
|
|
|
|
|
- **Display and LED** under Node Settings: display mode, status LED, and display rotation for
|
|
|
a screen mounted upside down (#523). The display and LED controls are shown separately, each
|
|
|
only when the radio says it can change it (#1132). See Known issues for radios on firmware
|
|
|
1.7.0.
|
|
|
- **BLE pairing PIN** in the device Actions: set a 6-digit PIN the radio asks for when a phone
|
|
|
or PC pairs, or reset it to the firmware default. It's shown in plain text, because any app
|
|
|
connected to the radio can read it anyway. Devices already paired may need to forget the
|
|
|
radio and pair again (#1100).
|
|
|
- **Factory Reset**, in Settings, with a red confirm like Reboot. It erases the radio's
|
|
|
identity, contacts, channels and settings, and can't be undone. A box, on by default, also
|
|
|
deletes that radio's data stored in the app. The radio drops the connection before it
|
|
|
erases, so the app can't confirm the reset happened. With the box ticked, the app deletes
|
|
|
its data as soon as the reset is sent. Over Bluetooth, remove the radio's old pairing from
|
|
|
your phone or PC before reconnecting, because the reset erases it (#1057, #1118).
|
|
|
- The app now asks an Offband radio what it supports instead of inferring it from a version
|
|
|
number (#1094, #1065). Fixed along with it: **blocks stored on the radio**, the radio's
|
|
|
capture log in **Serial capture**, **CoreScope observer counts** and **observer settings**
|
|
|
could be hidden on Offband firmware that supports them, because the app was checking a
|
|
|
version number. Settings added in 1.7.0 for Offband radios, such as GPS power save and
|
|
|
custom tunes, appear once the radio runs Offband firmware 1.7.0.
|
|
|
|
|
|
### Everything else
|
|
|
|
|
|
- **macOS:** a desktop build is now part of each release. It's signed with an Apple Developer
|
|
|
ID and notarized by Apple, so it opens like any downloaded app. It's added to this page once
|
|
|
Apple accepts it, which can be a while after the other downloads appear. If Apple doesn't
|
|
|
accept it, the release goes out without a macOS download rather than with an unchecked one.
|
|
|
This is its first release, and it hasn't had a full test pass yet (#1108, #1109).
|
|
|
- **Share logs** and **About** are reachable from the connect screen with no radio connected,
|
|
|
through a new settings icon. A failed log export now shows a message that stays until you
|
|
|
dismiss it (#693).
|
|
|
- If a Bluetooth scan can't start, the app says why and keeps the message on screen. On
|
|
|
Android 11 and older, that usually means Location is turned off (#1033).
|
|
|
- Map tile requests now identify the app as Offband MeshCore, as OpenStreetMap's tile policy
|
|
|
requires, and every map shows the OpenStreetMap credit (#1111).
|
|
|
- Long menus scroll, so items at the bottom (such as a room server's Delete Contact) can be
|
|
|
reached, and a link right beside an @mention can be tapped (#1074, #1075).
|
|
|
- The app is spelled **Offband MeshCore** everywhere: launcher, window title, notifications
|
|
|
and web. On Windows your data folder keeps its old name, so nothing moves (#1050).
|
|
|
- **iOS:** the Google Play link, Donate and the Experimental section are hidden, channels get a
|
|
|
back arrow and the edge swipe works, and tapping or dragging the messages dismisses the
|
|
|
keyboard (#1048, #1051, #1052).
|
|
|
- After you've used the app for a while (the third launch, at least 7 days after the first),
|
|
|
it asks once whether you'd like to support its development. **Not now** puts it off for 30
|
|
|
days, **Sponsor** opens the page and puts it off for 90, and **Never Show Again** means
|
|
|
exactly that. It isn't shown on iOS. You can always find it under About in Settings (#1129).
|
|
|
|
|
|
### For troubleshooting
|
|
|
|
|
|
- The app log now records every channel notification decision and every save of a
|
|
|
notification setting, and each channel sync records what it checked before clearing any
|
|
|
history, or why it skipped the check (#1122, #1128).
|
|
|
|
|
|
### Known issues
|
|
|
|
|
|
- **Phone notifications set to Off for a channel can still notify.** Under investigation
|
|
|
(#1121).
|
|
|
- **Factory reset from one phone leaves that radio's old data on your other phones** and PCs.
|
|
|
Only the phone that sent the reset deletes its copy (#1123).
|
|
|
- **On a radio with a screen but no switchable LED** (the SenseCAP T1000-E, the QCC badge, the
|
|
|
Heltec T096) running Offband firmware 1.7.0, the Status LED switch still appears and the
|
|
|
radio turns the change down. Firmware 1.7.0 doesn't report the display and LED separately
|
|
|
yet. A later firmware release does, and the app then hides that switch (#1132).
|
|
|
- **A Display or LED change can be undone** by the radio's older reading arriving just after
|
|
|
it (#1124).
|
|
|
- **Adding a contact when the radio's contact table is full shows it as added**, and direct
|
|
|
messages to it fail silently after 8 seconds (#1028).
|
|
|
- **On a SenseCAP T1000-E, Position Reporting Interval says "Location updated"** even though
|
|
|
the radio refused the value (#1134).
|