The map "Current path" panel joined _pathTrace byte-by-byte, so once the
builder started capturing the full configured-width prefix per tap (#150),
a single 2-byte node read as "84,f4" — looking like two hops. Format via
PathHelper.formatPathHex at the configured width so it reads "84F4".
Bumps build to +49 for the b49 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The repeater contact menu hardcoded "Ping" and always sent a target-only
(direct) trace, so a multi-hop repeater offered a "Ping" that could never
return. Mirror the room behavior: a repeater with a known route is
labelled "Path Trace" and traced along that route (round-trip); only a
direct neighbour (no path) shows "Ping" and pings directly.
Bumps build to +48 for the b48 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The trace was width-1 end to end (flags=0, a 1-byte path, and a
1-byte-per-hop parse + render), so on a 2-/3-byte path-hash mesh it
returned 1-byte hops (`6A`, not `6Axx`) and failed to route where a
1-byte prefix is ambiguous ("Path trace not available").
- Send: path_sz = floor(log2(width)); build width-byte hops — the
repeater/room "Ping" prefixes (contacts_screen), the round-trip
buildPath (now mirrors by hop, not byte), and the map trace builder.
- Parse: read the flag byte for the hop width, group the hash bytes into
packed width-byte hops, key contacts by the full prefix, 1 SNR per hop.
- Render: list panel + markers + map points iterate packed hops, labelled
at the configured width.
PathHelper gains tracePathSz / traceHopBytes / packPrefix / tracePathHops
/ buildTraceRoundTrip, all unit-tested (incl. width-2 hop mirroring).
Bumps build to +47 for the b47 test binary.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Add Channel "Scan QR Code" scanner now accepts channel share URIs
(meshcore://channel/add) alongside community QR JSON: it parses name +
secret, confirms, and adds the channel to the next free slot via
setChannel. Completes the channel-QR round-trip in-app, and interops with
the reference app's channel QRs.
Bumps build to +52 for the b52 combined test binary (path-hash + trace +
channel QR).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Channel.toShareUri/fromShareUri/isValidShareUri encode the reference
MeshCore app's format: meshcore://channel/add?name=<url-encoded>&secret=<hex32>.
A "Share QR Code" action in the channel menu shows the QR via the existing
QrCodeShareDialog, so it round-trips with the reference app.
Encode/decode unit-tested against both real reference examples (#test, #echo).
Scan-to-add follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three routing-match sites keyed/compared nodes by only the first
public-key byte, which collides when two nodes share a first byte on a
2-/3-byte path-hash mesh:
- DirectRepeater.matchesPathStart() replaces the 1-byte
`pubkeyFirstByte == pathBytes.first` direct-repeater check in
chat_screen and path_management_dialog (x3 each).
- map _computeGuessedLocations packs the full configured-width prefix as
the repeaterByHash key and looks up the contact-side hop at the same
width — was keying publicKey[0] but reading pathBytes.last, a silent
miss at width>1 that stopped location-guessing on multi-byte meshes.
- map _filterContactsBySettings overlap detection compares the
configured-width prefix via _samePubkeyPrefix (was publicKey.first).
Adds DirectRepeater.matchesPathStart unit tests. Bumps build to +46 for
the combined path-hash sweep test binary (b46: #151+#154+#155+#156).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "Set Path" dialog parsed, built, and displayed hop prefixes as a fixed
1 byte (substring(0,2)), so on a 2-/3-byte path-hash mesh manual entry produced
wrong-width routing paths and the helper text claimed "1 byte". Make it width-
aware from connector.pathHashByteWidth.
- parsePathPrefixes(text, width, invalid): static + testable; each entry must be
EXACTLY width*2 hex chars (wrong-length / malformed go to invalid, never
silently truncated); width clamped >= 1.
- _updateTextFromContacts / display / maxLength group by the configured width;
the display substring is guarded against short keys.
- show() takes pathHashByteWidth; the chat + path-management callers pass
connector.pathHashByteWidth.
- l10n: reworded the path-entry helper / example / instructions to be width-
agnostic (dropped the "2 hex / 1 byte / first byte" claims). The 17 non-English
locales keep their prior strings, flagged for re-translation (English fixed).
analyze clean; 6 parsePathPrefixes tests (incl. exact-length + clamp). Gemini v1
BLOCKER (unguarded substring) + MAJOR (silent truncation) fixed; v2 MAJORs were
the pre-existing refresh button (out of scope), v2 MINOR (1-byte example) fixed.
Closes#155
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHelper.formatPathHex / resolvePathNames assumed 1 byte per hop, so the
direct-chat "full path" and path-management dialogs rendered routing paths
per-byte (84,AB instead of 84AB) and resolved hop names by a single byte on
2-/3-byte path-hash meshes. Group bytes into pathHashByteWidth-sized hops and
match hop names by the full-width prefix.
- formatPathHex(bytes, width) / resolvePathNames(bytes, contacts, width) group
into width-byte hops (trailing partial hop kept); name match uses the full
hop prefix.
- chat_screen + path_management_dialog pass connector.pathHashByteWidth.
analyze clean; 7 PathHelper tests (incl. width-2 collision-avoidance); Gemini: ship.
Closes#154
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The fork-only 0xC1 GPS command was sent to any connected radio — both the
60s self-location poll (on gps=1) and the Settings GPS status query. Stock /
non-Offband MeshCore firmware can't answer it, so gate both behind a
capability check.
- firmwareSupportsOffbandGps(offbandCaps): presence of the Offband-fork
offband_caps byte (device-info v14+), which stock MeshCore never emits.
- requestOffbandGps() hard-returns when unsupported — 0xC1 never goes out.
- _reconcileGpsPolling() centralizes the poll decision (support AND gps=1)
across all three triggers + the device-info reply, so frame order is moot.
- Settings hides the GPS status section on unsupported firmware.
Interim presence-gate; a dedicated OFFBAND_CAP_GPS bit can follow once
firmware defines one. Unit-tested (3 new); Gemini review: ship.
Bumps build number to +43 (test build b43).
Closes#144
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Offband 0xC1 GPS query: 1-byte request -> RESP 0xC1 ASCII reply
(enabled/detected/active/fix/baud/lat/lon/alt_cm/sats/time), parsed into
OffbandGpsStatus (lat/lon /1e6). New GPS-status section in the Location dialog
(live-fix vs stored banner + coords/sats/alt/time). Validated against RedCreek's
feat/gps-state-query test firmware.
#140: the per-minute GPS poll now uses the lightweight 0xC1 query instead of
CMD_APP_START (which re-walked channels + re-drained messages = the BLE re-init
flood); a live fix updates self-lat/lon. Validated on b42 (APP_START ~1/min ->
~0, 0xC1 polls clean every 60s, channel re-walk gone).
Gemini (fix-then-ship): atomic completer-claim in _handleOffbandGps to shrink
the stale-reply race; full elimination needs a protocol sequence id, but the
poll shares in-flight via the re-entrancy guard and the query button is disabled
during a request, so concurrent requests don't occur in practice. The hardcoded
snackbars Gemini flagged in _editLocation are pre-existing l10n debt, not
introduced here; all new strings are localized.
Closes#135Closes#140
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Parse the device-info reply's readable strings (build date / model / firmware
version, NUL-terminated after the 8-byte header) and show firmwareVersion +
deviceModel in Settings → Device Info. Raw strings are logged on connect.
End-anchored field mapping (deviceInfoFields) keeps the version correct on
partial frames.
Gemini (fix-then-ship): removed the unused deviceBuildDate field/getter (dead
state) — the build date stays in the connect log via the raw strings, and
deviceInfoFields still parses + tests it.
Closes#134
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Reply long-press drops the cursor into the composer (post-frame focus). (#131)
- "Reply with route" sends `@[sender] ↩ N hops · via <path>`, byte-truncated with `…`, Cyr2Lat-aware. (#106)
Gemini (fix-then-ship): the unawaited `sendChannelMessage` in `_sendRouteReply` mirrors the established `_sendMessage` convention — failure surfaces via the visible message's delivery status, not the returned Future; holistic channel-send error handling is tracked in #133 per maintainer decision. O(n^2) path truncation is negligible on the <=160-byte payload; the `w<1` guard is a defensive div-by-zero (pathHashByteWidth is 1-3).
Closes#131Closes#106
Part of #132
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Packet Path mis-identified repeaters: a 2-byte path hash like 6A3D was
sliced into two 1-byte hops (6A + 3D), so the first byte collided with an
unrelated repeater (Freemasons 6A..) and the second matched nothing
("Unknown Repeater").
- meshcore_protocol: realHopCount() converts the firmware path BYTE length
to true hops via the device hash width.
- channel_message_path_screen: slice/count/match at the device
pathHashByteWidth (not the unreliable per-message high-bits); bucket and
match on the full w-byte hash (mirrors _pathMatchesContact), not hash[0].
- channel_chat_screen: same width fix on the per-message via-line + hop badge.
- settings: show the build number alongside the version name.
- bump 1.1.2-beta.4+36.
- test: realHopCount regression coverage.
Gemini review (llm-consult): fix-then-ship; 2 findings clarification-only
(_formatHash is canonical hex used identically both sides; pathHashByteWidth
is static per-connection).
Part of epic #112.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The repeater "Path hash mode" dropdown showed raw mode numbers (0/1/2). Match
the companion device's selector (settings_screen.dart _PathHashSizeTile) so the
options are self-describing: "1-byte · max 64 hops" / "2-byte · max 32 hops" /
"3-byte · max 21 hops".
Underlying value (mode 0/1/2 = 1/2/3-byte) and the `set path.hash.mode N` wire
command are unchanged — labels only.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Platform-adaptive export on the BLE/frame log screen: the system share sheet on
mobile (the priority path), or open the logs folder in the file manager on
desktop. Web-safe (defaultTargetPlatform, no dart:io); flushes the file first so
it is current. Completes #97.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Consume the additive OCFG_BROKERS dump fields from firmware #172/#173
(backward-compatible — absent fields read as today's enabled/disabled):
- BrokerRuntimeState (`state`) + BrokerLastError (`last_error`) + a pure
BrokerConfig.status mapping -> Connected / Connecting / Failed (reason) /
Held (no clock|low heap) / Enabled / Disabled; held shown neutral, not error.
- Brokers list shows the real status line + colour instead of just "enabled".
- Editor shows jwt_owner / iata_override resolved defaults (`jwt_owner_resolved`,
`iata_resolved`) as greyed placeholders when the raw key is blank; only writes
the raw key when the user enters a value (blank stays the source of truth).
Sourced from the pool dump (getBrokers); getBroker's per-field GET list is
unchanged pending the firmware GET-ability answer on #173. Unit-tested mapping,
parsing, and backward-compat (9 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A firmware build can ACK a broker enable/disable as success without applying it
(HV4; meshcore-firmware#179). The quick toggle and the editor save previously
trusted the ACK and showed a success snackbar, so an ack-but-no-op looked like
it worked.
Both paths now SET, wait a short settle, re-read the slot, and report what the
device ACTUALLY did:
- applied -> confirm
- notApplied -> warn "possible firmware issue"; the editor stays and re-seeds to
the device's true state instead of popping a false success
- unverified -> re-read failed (e.g. an enable that rebooted the device)
Every device is treated identically: the UI reflects the re-read, never assuming
a change took that the device didn't confirm.
- BrokerConfig.classifyApply pure classifier + BrokerApplyOutcome (unit-tested)
- ObserverConfigService.applySettleDelay
- wired into mqtt_brokers_screen quick toggle + broker_editor_screen save
- widget test for the ACK-but-not-applied path
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware feedback: JWT owner defaults to the device pubkey and IATA override
is optional by definition, so gating a save on them is wrong -- they have
under-the-hood firmware defaults.
BrokerConfig.enableError now checks only the structural fields with no default:
URL present, port in range. The JWT field checks are gone; the firmware enforces
JWT completeness with its defaults, and a genuinely-bad enable surfaces the
firmware's reason via the failure messaging added earlier. The editor's pre-save
check and the list's quick Enable both follow.
Tests updated to the new contract (a JWT broker with blank owner/audience now
enables; a structurally-complete quick Enable confirms). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware test feedback:
- Long-press Enable/Disable was silent on success AND failure. It now confirms
on success and, on failure, surfaces the device's reason (lastError) instead
of nothing.
- The client now refuses to quick-Enable a broker that can't work (incomplete
required fields, e.g. JWT without audience/owner) and says why -- so it never
reports "enabled" on a broker that won't run. (Firmware should reject too.)
- The editor blocked a DISABLE on blank/invalid fields. Validation now gates
ENABLING only -- disabling a slot with partial values is fine; it won't be
active.
Validation rules shared via BrokerConfig.enableError (editor pre-save + list
quick-Enable). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The broker pool gets its own screen, reached from a "MQTT brokers" row in the
Observer pane (replacing the read-only inline list and its stale "pending
firmware support" note).
- MqttBrokersScreen: a tile per broker (tap -> editor, long-press -> Enable /
Disable / Edit / Clear), and a + FAB that opens the next empty slot (disabled
when all 10 are full) -- matching channels_screen's FAB-add pattern. Each
action re-reads only the affected slot, never the full pool dump.
- Observer pane: the broker section is now a navigational row showing
"N configured - M enabled"; the editor is wired in end-to-end.
3/3 screen tests green; full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The edit UI for one broker slot. Staged-save: controls edit local state; Save
sends only the CHANGED fields through saveBroker (enabled written last), so a
partial save can't leave a live-corrupt broker.
- Fields: url, port, transport, auth_type, username, write-only password,
topic_prefix, iata_override, jwt_* (when auth=jwt), ca_cert (when tls/wss),
plus the enabled toggle.
- Validation before any SET: port 1-65535, jwt audience+owner when auth=jwt.
- Write-only password: sent only when typed; blank keeps the stored secret.
- Refresh: single-slot re-GET (getBroker) + reseed, with a dirty discard guard.
- Back button guards unsaved edits (PopScope -> Discard? dialog) -- Gemini's
state-loss finding.
4/4 widget tests green. Brokers list screen + Observer-pane wiring next.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three observer-delta fixes (per the #80 sync diagnosis / G2):
- A: settings screen gates the Observer category via context.select on the
supported flag, not a connector-wide context.watch -- the watch rebuilt the
whole settings screen on every sync frame, thrashing the UI thread.
- B: a flat Save re-reads only the flat settings (refresh includeBrokers:false),
never the 84-frame broker pool -- no BLE re-flood for a display toggle.
- C: the initial observer read is deferred until the device's channel/contact
sync settles, so it never competes with that sync for BLE.
TDD: B (no OCFG_BROKERS on a flat refresh) + C (refresh deferred while syncing,
fires once idle). Full observer suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The G2 BLE log showed the config protocol works (GETs return values; the broker
dump starts) but the firmware's broker dump stalls without BROKERS_END, so
getBrokers() times out. The client was treating that as a TOTAL failure --
discarding the 7 flat settings it read cleanly and blanking the pane.
Now the broker pool loads independently: refresh() builds + shows the flat
config even when getBrokers fails, flags brokersUnavailable, and the pane shows
the broker section as "unavailable" instead of going stale. Flat settings stay
usable. TDD red->green; full observer suite (39) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Closes the 2 MINOR findings from the G1 re-review (#76):
- MINOR-A: ObserverConfigService.refresh() no longer wipes lastError / clears
stale on a PARTIAL read. A null from any getFlat is a failed read; the
snapshot is marked stale and the error kept (error-visibility).
- MINOR-B: the settings pane validates status_interval against the firmware
range (10-3600) before sending; an out-of-range value is not put on the wire
and the user is told.
TDD: both tests RED first (current sent '5'; refresh wiped the error), GREEN
after. Full observer suite (37 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hardened the staged-save pane (settings_screen capability gate already correct):
- Normalize an unexpected device rotation to a valid SegmentedButton segment
{0,180} so the control always has a valid selection and never echoes an
out-of-range value back on save.
- Disable Save during a refresh (no save/refresh race on the controllers).
- digitsOnly formatter on status-interval (firmware still range-checks).
- Keys on the SSID/password fields for robust widget-test targeting.
4 widget tests pin the security-sensitive behavior: saves send ONLY changed
keys, a blank password keeps the stored secret, an entered password is sent as
wifi.pwd then the field clears, rotation is normalized, stale/error surfaced
(SAFELANE §6). Full observer suite (33 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- screens/settings/observer_settings_view.dart: staged-save pane for WiFi
(ssid/pwd/enabled), MQTT region (iata/status_interval), display
(always_on/rotation 0|180), with Save (changed keys only) + Refresh +
stale/error banners; the broker pool renders read-only (enable/clear await
the firmware F-task).
- settings_screen.dart: register the Observer category, gated on
ObserverConfigService.supported (re-evaluated as the connector's offband_caps
flips on connect/disconnect).
- connector/meshcore_connector.dart: parse the offband_caps byte (device-info
byte 82, after path_hash_mode) + expose offbandCaps.
- services/observer_config_service.dart: supported computed live from the
connector (version gate + cap bit).
- main.dart: provide ObserverConfigService.
Strings are English-only pending l10n ARB keys.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CI's `dart format --set-exit-if-changed .` step is repo-wide. My A/B/C
commit hand-wrote the .catchError blocks without running the formatter,
and 2 settings views carried pre-existing format drift from #28. dart
format reflows all three (whitespace only, identical logic):
- lib/connector/meshcore_connector.dart (this PR's blocks)
- lib/screens/settings/app_settings_view.dart (pre-existing, #28)
- lib/screens/settings/message_settings_view.dart (pre-existing, #28)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
settings_screen action handlers fire-and-forgot or awaited-without-catch several connector calls, and _loadVersionInfo called setState after an await with no mounted guard. Add a mounted guard to _loadVersionInfo; try/catch + error snackbar to the GPS-enable toggles (inline + _editLocation dialog) and getContacts; await syncTime in _syncTime so the 'synchronized' snackbar shows only on success (it previously fired before the await); and in _editLocation's save, capture the messenger before the pop and wrap the setCustomVar/setNodeLocation/refreshDeviceInfo awaits.
Verified non-issues: deleteAllPaths is void, _PrivacySection._apply() already has a try/catch, and exportGPX catches internally and returns gpxExportFailed. Completes #28; error strings English for now (separate l10n sweep).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings onChanged/onTap callbacks fire-and-forgot AppSettingsService Future<void> setters, so a persist failure rejected unhandled and was swallowed. Add a shared persistSetting(context, action) helper that awaits the setter in a try/catch and shows a dismissible error SnackBar, capturing the messenger before the await so it survives a picker-dialog pop. Wrap the 27 onChanged/onTap setter sites in app_settings_view + message_settings_view; setAppDebugLogEnabled and setNotificationsEnabled (which await + show their own confirmation) get an inline try/catch instead.
Covers the two onChanged panes; the settings_screen action flows (GPX export, location dialogs, version-info mounted guard) follow in a second pass, so #28 stays open. Error strings are English for now (separate settings l10n sweep).
Adds a persistSetting widget test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the typed text anywhere in the shortcode name (not just the prefix),
ranked exact > prefix > substring, so `:check` surfaces the checkmarks (✅ is
`white_check_mark`). Add check/checkmark/tick aliases for ✅ in a separate,
regen-safe map the chat + channel composers consume.
Closes#45
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Human testing found Privacy controls slow to respond. _PrivacySection._apply called refreshDeviceInfo() after every toggle/dropdown change -- a 5-frame device re-query (deviceQuery, appStart, battery, customVars, autoAddFlags) that does not even re-fetch telemetry. setTelemetryModeBase already updates the connector's local state and calls notifyListeners(), so the refresh was pure overhead. Removed it; apply is now a single setOtherParams frame, matching the auto-add section's responsiveness.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bring radio config up a level: render the form directly in the Radio Settings pane with a full-width Save button, instead of a tile that opens a dialog. _RadioSettingsDialog -> _RadioSettingsForm; build returns an inline Column of the (verbatim) fields + Save; _saveSettings drops the Navigator.pop (no dialog), which also resolves the unguarded-pop-after-await finding. Removed _showRadioSettings. Field widgets, controllers, preset matching, and off-grid snapshot logic unchanged.
Key the form on the device's current radio values (freq/bw/sf/cr/txpower/clientRepeat) so a device-reported change re-seeds it -- the dialog got this for free by reopening; the persistent inline form needs the key.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Privacy save/cancel dialog with an inline _PrivacySection in the pane: advert-location + multi-ACKs toggles and the three telemetry-mode dropdowns now apply on change. All five commit through one setTelemetryModeBase call, so each control sends the full current state (coalesced via an apply guard) and reverts to the device's values on failure with an error snackbar -- folding in the #28 error handling for this pane. Removes the category->tile->dialog hop; drops _privacySettings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flatten two more redundant layers in the settings IA. Radio Stats: extract CompanionRadioStatsScreen's body into an embeddable CompanionRadioStatsBody (carrying the 1s-polling acquire/release lifecycle), add a top-level Radio Stats category that renders it directly, and remove the nested Radio Stats tile from the Radio Settings pane (the screen is kept; still pushed from radio_stats_entry.dart). Rename the Contact Settings category to Contacts (reusing contacts_title) with a contacts icon; rename _messagesContactsPane to _contactsPane.
Also fixes a pre-existing chart-freeze surfaced by review: _NoiseChartPainter compared only sample-list length, so the noise chart stopped repainting once the 120-sample buffer filled. Now compares contents via listEquals.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Split the monolithic AppSettingsScreen (reached via a redundant tile->push from the App Settings category) into two embeddable views rendered directly in the shell panes: AppSettingsView (appearance, translation, battery, map, Cyr2Lat, debug) and MessageSettingsView (notifications + message handling, a new top-level 'Message Settings' category after Contacts). Removes the category->tile->separate-screen layer; each category now lands directly on its settings. Deletes app_settings_screen.dart (no remaining refs). Adds settings_messageSettings(+Subtitle) l10n keys (en template; other locales fall back pending the l10n sweep). Card bodies moved verbatim -- behavior preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Contact-settings tile->modal dialog with an inline _AutoAddSection: five SwitchListTiles that apply on toggle (send config frame + refetch flags). Apply path has a coalescing guard (re-applies the latest state instead of overlapping sends) plus inline error handling (revert to device flags + snackbar). _PathHashSizeTile onChanged wrapped in try/catch + error snackbar.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Run dart format across the repo to clean drift in 5 files (channel_chat_screen, settings_screen, settings_shell, gif_picker, mention_autocomplete) from earlier straight-to-dev commits that never hit the format CI. No logic change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the monolithic card+dialog settings screen with a responsive master-detail shell (rail+pane when wide, list+push when narrow; layout chosen by width via LayoutBuilder). Regroup the existing settings into intent categories and surface Path Hash Size (1/2/3-byte) in Radio and range, the first device-config-parity gap (previously repeater/CLI-only).
No settings lost: every existing control stays reachable. Phase 0 of #7.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The maintainer's keyboard can't type emoji, so the composer now accepts
:shortcode: input with an inline autocomplete:
- Type `:` to open a bottom-anchored picker; arrows/Tab/click select, Esc
dismisses. Best/exact match sits at the bottom, nearest the caret.
- Enter completes an unambiguous emoji (single OR exact match) then sends,
so `:rofl` + Enter ships the glyph, not the literal text. Ambiguous
matches still send raw; Tab picks one deliberately.
- A completed `:name:` (closing colon) auto-converts in place.
- 1913 gemoji shortcodes bundled (lib/helpers/emoji_shortcodes.dart, MIT).
- Byte-count aware via the existing ByteCountedTextField; shares the
MentionAutocompleteField with @-mention input (both composers wired).
Version 9.0.0+12 -> 9.1.0+14 (MINOR feature; build kept monotonic after
the rebrand's +13 on the parallel chore/offband-rebrand branch).
Grid/tap picker deferred (#5 follow-up).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Typing @ at the start of a word opens a bottom-anchored dropdown above
the composer, filtered live by the text after @. Recent channel senders
sort to the bottom (most recent closest to the input, auto-highlighted);
other contacts stack above in alpha order (A nearest the input), with a
Recent divider between. Up/Down move the highlight, Tab or click selects
(inserting @[ExactName] at the cursor), Esc dismisses, Enter sends.
- New MentionAutocompleteField wrapping ByteCountedTextField with an
Overlay dropdown and FocusNode.onKeyEvent key handling
- _buildMentionCandidates sources recent senders from the channel
history plus contacts, deduped (recent wins)
Verified on desktop, including wrapped/multi-line input.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-length byte packs hop count (low 6 bits) and hash
width (high 2 bits) into one byte. The UI used it raw, so a 4-hop/2-byte
path showed as "68 hops" and the path list rendered per byte (8 entries
for 4 hops), and a 2-byte region mismatched a 1-byte one.
- Add pathHopCount/pathHashSizeBytes decoders (meshcore_protocol.dart)
- Add ChannelMessage.hopCount / pathHashSize getters; decode at display
and leave the stored pathLength untouched so the duplicate-merge in
the connector stays self-consistent
- Add an always-visible per-message hop-count badge in the channel chat
- Group path bytes into hash-width hashes in the chat "via" line and the
Message Details screen, using each packet's own width so mixed
1/2/3-byte feeds render correctly side by side
Verified against live BLE traffic (mixed 1-byte and 2-byte senders).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- channel_chat: always-visible HH:MM timestamps (theme-aware dark-mode contrast)
- channel_chat: Today/Yesterday/date day dividers between message days
- contacts: pin favorites to the top, preserving the active sort within each group
Fork of zjs81/meshcore-open (MIT). Tracking #2 (migrated from Strycher/LoRa#343).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Strycher
HDDen