Replace the DM composer with an "Unblock to message" notice bar when
the contact is blocked, so a block also stops outgoing DMs (previously
only incoming DMs/adverts were suppressed). Inline unblock restores the
composer. Adds block_composerNotice l10n string and documents the
outgoing-DM rule in block-contract-as-built.md §4.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-len byte packs a hash-mode hint in the high 2 bits and the
path byte-length in the low 6. Contact.fromFrame stored it raw, so a direct
node at 2-byte mode (0x40) read as pathLength 64: "64 hops" in the UI, a ~195s
ACK timeout, and up to 64 junk bytes pulled into contact.path that broke
repeater status/telemetry/neighbors until the path was cleared (#222).
- contact.dart: decode via pathHopCount (& 0x3F); keep 0xFF as the flood
sentinel; use the decoded length for safePathLen so path bytes stay clean.
- chat_screen _currentPathLabel: show realHopCount(pathLength, pathHashByteWidth)
so 2/3-byte nodes read the correct hop count; 0 -> Direct.
- Regression test for 0x40/0x00/0x03/0x44/0xFF; updated two model_changes tests
that codified the old raw mapping.
Part of #222 (stays open for on-hardware validation by the reporter).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Completes the A5 entry points: contact long-press sheet, DM app-bar overflow, and
discovery item sheet each get a Block/Unblock toggle (by pubkey, reflecting current
state). Pairs with the channel 'Block sender' from 8a2e764.
Epic A #165 / A5 #172. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three routing-match sites keyed/compared nodes by only the first
public-key byte, which collides when two nodes share a first byte on a
2-/3-byte path-hash mesh:
- DirectRepeater.matchesPathStart() replaces the 1-byte
`pubkeyFirstByte == pathBytes.first` direct-repeater check in
chat_screen and path_management_dialog (x3 each).
- map _computeGuessedLocations packs the full configured-width prefix as
the repeaterByHash key and looks up the contact-side hop at the same
width — was keying publicKey[0] but reading pathBytes.last, a silent
miss at width>1 that stopped location-guessing on multi-byte meshes.
- map _filterContactsBySettings overlap detection compares the
configured-width prefix via _samePubkeyPrefix (was publicKey.first).
Adds DirectRepeater.matchesPathStart unit tests. Bumps build to +46 for
the combined path-hash sweep test binary (b46: #151+#154+#155+#156).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The "Set Path" dialog parsed, built, and displayed hop prefixes as a fixed
1 byte (substring(0,2)), so on a 2-/3-byte path-hash mesh manual entry produced
wrong-width routing paths and the helper text claimed "1 byte". Make it width-
aware from connector.pathHashByteWidth.
- parsePathPrefixes(text, width, invalid): static + testable; each entry must be
EXACTLY width*2 hex chars (wrong-length / malformed go to invalid, never
silently truncated); width clamped >= 1.
- _updateTextFromContacts / display / maxLength group by the configured width;
the display substring is guarded against short keys.
- show() takes pathHashByteWidth; the chat + path-management callers pass
connector.pathHashByteWidth.
- l10n: reworded the path-entry helper / example / instructions to be width-
agnostic (dropped the "2 hex / 1 byte / first byte" claims). The 17 non-English
locales keep their prior strings, flagged for re-translation (English fixed).
analyze clean; 6 parsePathPrefixes tests (incl. exact-length + clamp). Gemini v1
BLOCKER (unguarded substring) + MAJOR (silent truncation) fixed; v2 MAJORs were
the pre-existing refresh button (out of scope), v2 MINOR (1-byte example) fixed.
Closes#155
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHelper.formatPathHex / resolvePathNames assumed 1 byte per hop, so the
direct-chat "full path" and path-management dialogs rendered routing paths
per-byte (84,AB instead of 84AB) and resolved hop names by a single byte on
2-/3-byte path-hash meshes. Group bytes into pathHashByteWidth-sized hops and
match hop names by the full-width prefix.
- formatPathHex(bytes, width) / resolvePathNames(bytes, contacts, width) group
into width-byte hops (trailing partial hop kept); name match uses the full
hop prefix.
- chat_screen + path_management_dialog pass connector.pathHashByteWidth.
analyze clean; 7 PathHelper tests (incl. width-2 collision-avoidance); Gemini: ship.
Closes#154
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the typed text anywhere in the shortcode name (not just the prefix),
ranked exact > prefix > substring, so `:check` surfaces the checkmarks (✅ is
`white_check_mark`). Add check/checkmark/tick aliases for ✅ in a separate,
regen-safe map the chat + channel composers consume.
Closes#45
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The maintainer's keyboard can't type emoji, so the composer now accepts
:shortcode: input with an inline autocomplete:
- Type `:` to open a bottom-anchored picker; arrows/Tab/click select, Esc
dismisses. Best/exact match sits at the bottom, nearest the caret.
- Enter completes an unambiguous emoji (single OR exact match) then sends,
so `:rofl` + Enter ships the glyph, not the literal text. Ambiguous
matches still send raw; Tab picks one deliberately.
- A completed `:name:` (closing colon) auto-converts in place.
- 1913 gemoji shortcodes bundled (lib/helpers/emoji_shortcodes.dart, MIT).
- Byte-count aware via the existing ByteCountedTextField; shares the
MentionAutocompleteField with @-mention input (both composers wired).
Version 9.0.0+12 -> 9.1.0+14 (MINOR feature; build kept monotonic after
the rebrand's +13 on the parallel chore/offband-rebrand branch).
Grid/tap picker deferred (#5 follow-up).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Remove stray Navigator.pop(context) in _markAsUnread for both contact
and channel chats so the action no longer exits the conversation
- Thread initialUnreadCount through map discovered-contact "Open Chat"
button so the unread divider/jump still fires from that entry point
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Add "Mark as Unread" option to message context menu in both
contact and channel chats
- Show "New messages" divider line between read and unread messages
- Add setContactUnreadCount/setChannelUnreadCount methods to connector
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pass initialUnreadCount to chat screens before markRead clears it
- Use two-phase scroll: jumpTo estimated offset to build lazy items,
then ensureVisible for precise positioning
- Await ensureVisible before clearing scroll guard to prevent
scrollToBottomIfAtBottom from overriding the animation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
adds a new widget that counts bytes during entry
configurable limit and shows user both count and limit
provides color feedback
use new widget in chat and channel text entry
this adds a generator showDismissibleSnackBar which by default allows
tapping to clear snack bar toasts. all SnackBar properties are still
available and the
all callers should now use showDismissibleSnackBar() instead of calling
ScaffoldMessenger.of(context).showSnackBar(SnackBar())
* Refactor contact filtering and improve localization strings; enhance path trace handling
* Add localization for new CLI commands and update existing strings
* Enhance contact handling and UI updates across multiple screens
add unfiltered contact access and improve last seen resolution
* Add polling interval configuration and improve contact handling
* Reorder command constants for better organization and clarity
* Refactor contact handling by removing unnecessary mapping and improving clarity across multiple screens
* Moved RadioStatsIconButton in chat screen for improved UI consistency
* Added indicators to AppBar for channels
* Ignore contacts with self public key in contact handling
* Simplify path removal logic and clean up unused imports in path management dialog
* Enhance path hop resolution by adding distance checks to improve candidate selection accuracy
* Remove unnecessary reset of radio stats poll reference count in polling interval setter
This adds Giphy page URLs and `media.giphy.com` URLs (with and without
protocols) as *accepted* encodings for GIF messages, alongside the `g:`
syntax.
When someone posts such a URL by itself as a message, it will be rendered inline just like `g:` messages are now.
This does not change the encoding that GIF messages are *sent* in; that
is still the `g:` syntax.
- Introduced translation functionality in chat screen, allowing users to translate messages before sending.
- Added MessageTranslationButton to the input bar for enabling/disabling translation.
- Implemented translation service to handle incoming and outgoing text translations using llama models.
- Enhanced message storage to include original and translated text, language codes, and translation status.
- Created UI components for displaying translated messages and managing translation options.
- Added translation model management, including downloading and storing models locally.
- Updated app settings to manage translation preferences and model selections.
- Companion radio stats: poll and display noise floor, RSSI, SNR, airtime
with dedicated ValueNotifier and ref-counted polling
- Adaptive RF-aware TX backoff based on radio conditions instead of fixed 5s
- Variable-width path hash support (1-3 bytes per hop)
- Air activity dot indicator in app bar with tap to open stats screen
- Jump to oldest unread setting for chat screens
- 1s send cooldown on DM and channel messages
- Link style: theme-aware orange, added EmailLinkifier
- New languages: Hungarian, Japanese, Korean
- Remove dead DeviceScreen and BatteryIndicatorChip
- Remove wakelock_plus dependency
- TX power fields now read as signed int8
- Implemented radio statistics features in multiple screens including chat, channels, and settings.
- Added localization for new strings in Swedish, Ukrainian, and Chinese.
- Introduced a setting to jump to the oldest unread message in chat and channels.
- Enhanced path management and display for contacts and messages.
- Updated app settings to include new boolean for jumping to the oldest unread message.
- Improved battery indicator and radio stats display in the app bar.
- Removed unused wakelock_plus dependency and updated plugin registrations.
* feat: Enhance privacy settings and telemetry
- Implemented telemetry options for contacts, allowing users to enable or disable telemetry data sharing.
- Introduced a clear chat option in the chat interface for better message management.
- Updated the telemetry screen to handle telemetry data for contacts, including battery level.
- Refactored contact settings to include telemetry options and improved UI for better user experience.
* feat: Refactor repeater resolution logic across multiple screens
Strycher
HDDen
ericz
zjs81
zjs81
Dmitry Polshakov
Serge Tarkovski
Enot (ded) Skelly
Winston Lowe
Adam Novak