Three observer-delta fixes (per the #80 sync diagnosis / G2):
- A: settings screen gates the Observer category via context.select on the
supported flag, not a connector-wide context.watch -- the watch rebuilt the
whole settings screen on every sync frame, thrashing the UI thread.
- B: a flat Save re-reads only the flat settings (refresh includeBrokers:false),
never the 84-frame broker pool -- no BLE re-flood for a display toggle.
- C: the initial observer read is deferred until the device's channel/contact
sync settles, so it never competes with that sync for BLE.
TDD: B (no OCFG_BROKERS on a flat refresh) + C (refresh deferred while syncing,
fires once idle). Full observer suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The G2 BLE log showed the config protocol works (GETs return values; the broker
dump starts) but the firmware's broker dump stalls without BROKERS_END, so
getBrokers() times out. The client was treating that as a TOTAL failure --
discarding the 7 flat settings it read cleanly and blanking the pane.
Now the broker pool loads independently: refresh() builds + shows the flat
config even when getBrokers fails, flags brokersUnavailable, and the pane shows
the broker section as "unavailable" instead of going stale. Flat settings stay
usable. TDD red->green; full observer suite (39) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Closes the 2 MINOR findings from the G1 re-review (#76):
- MINOR-A: ObserverConfigService.refresh() no longer wipes lastError / clears
stale on a PARTIAL read. A null from any getFlat is a failed read; the
snapshot is marked stale and the error kept (error-visibility).
- MINOR-B: the settings pane validates status_interval against the firmware
range (10-3600) before sending; an out-of-range value is not put on the wire
and the user is told.
TDD: both tests RED first (current sent '5'; refresh wiped the error), GREEN
after. Full observer suite (37 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hardened the staged-save pane (settings_screen capability gate already correct):
- Normalize an unexpected device rotation to a valid SegmentedButton segment
{0,180} so the control always has a valid selection and never echoes an
out-of-range value back on save.
- Disable Save during a refresh (no save/refresh race on the controllers).
- digitsOnly formatter on status-interval (firmware still range-checks).
- Keys on the SSID/password fields for robust widget-test targeting.
4 widget tests pin the security-sensitive behavior: saves send ONLY changed
keys, a blank password keeps the stored secret, an entered password is sent as
wifi.pwd then the field clears, rotation is normalized, stale/error surfaced
(SAFELANE §6). Full observer suite (33 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- screens/settings/observer_settings_view.dart: staged-save pane for WiFi
(ssid/pwd/enabled), MQTT region (iata/status_interval), display
(always_on/rotation 0|180), with Save (changed keys only) + Refresh +
stale/error banners; the broker pool renders read-only (enable/clear await
the firmware F-task).
- settings_screen.dart: register the Observer category, gated on
ObserverConfigService.supported (re-evaluated as the connector's offband_caps
flips on connect/disconnect).
- connector/meshcore_connector.dart: parse the offband_caps byte (device-info
byte 82, after path_hash_mode) + expose offbandCaps.
- services/observer_config_service.dart: supported computed live from the
connector (version gate + cap bit).
- main.dart: provide ObserverConfigService.
Strings are English-only pending l10n ARB keys.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CI's `dart format --set-exit-if-changed .` step is repo-wide. My A/B/C
commit hand-wrote the .catchError blocks without running the formatter,
and 2 settings views carried pre-existing format drift from #28. dart
format reflows all three (whitespace only, identical logic):
- lib/connector/meshcore_connector.dart (this PR's blocks)
- lib/screens/settings/app_settings_view.dart (pre-existing, #28)
- lib/screens/settings/message_settings_view.dart (pre-existing, #28)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
settings_screen action handlers fire-and-forgot or awaited-without-catch several connector calls, and _loadVersionInfo called setState after an await with no mounted guard. Add a mounted guard to _loadVersionInfo; try/catch + error snackbar to the GPS-enable toggles (inline + _editLocation dialog) and getContacts; await syncTime in _syncTime so the 'synchronized' snackbar shows only on success (it previously fired before the await); and in _editLocation's save, capture the messenger before the pop and wrap the setCustomVar/setNodeLocation/refreshDeviceInfo awaits.
Verified non-issues: deleteAllPaths is void, _PrivacySection._apply() already has a try/catch, and exportGPX catches internally and returns gpxExportFailed. Completes #28; error strings English for now (separate l10n sweep).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings onChanged/onTap callbacks fire-and-forgot AppSettingsService Future<void> setters, so a persist failure rejected unhandled and was swallowed. Add a shared persistSetting(context, action) helper that awaits the setter in a try/catch and shows a dismissible error SnackBar, capturing the messenger before the await so it survives a picker-dialog pop. Wrap the 27 onChanged/onTap setter sites in app_settings_view + message_settings_view; setAppDebugLogEnabled and setNotificationsEnabled (which await + show their own confirmation) get an inline try/catch instead.
Covers the two onChanged panes; the settings_screen action flows (GPX export, location dialogs, version-info mounted guard) follow in a second pass, so #28 stays open. Error strings are English for now (separate settings l10n sweep).
Adds a persistSetting widget test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Match the typed text anywhere in the shortcode name (not just the prefix),
ranked exact > prefix > substring, so `:check` surfaces the checkmarks (✅ is
`white_check_mark`). Add check/checkmark/tick aliases for ✅ in a separate,
regen-safe map the chat + channel composers consume.
Closes#45
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Human testing found Privacy controls slow to respond. _PrivacySection._apply called refreshDeviceInfo() after every toggle/dropdown change -- a 5-frame device re-query (deviceQuery, appStart, battery, customVars, autoAddFlags) that does not even re-fetch telemetry. setTelemetryModeBase already updates the connector's local state and calls notifyListeners(), so the refresh was pure overhead. Removed it; apply is now a single setOtherParams frame, matching the auto-add section's responsiveness.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Bring radio config up a level: render the form directly in the Radio Settings pane with a full-width Save button, instead of a tile that opens a dialog. _RadioSettingsDialog -> _RadioSettingsForm; build returns an inline Column of the (verbatim) fields + Save; _saveSettings drops the Navigator.pop (no dialog), which also resolves the unguarded-pop-after-await finding. Removed _showRadioSettings. Field widgets, controllers, preset matching, and off-grid snapshot logic unchanged.
Key the form on the device's current radio values (freq/bw/sf/cr/txpower/clientRepeat) so a device-reported change re-seeds it -- the dialog got this for free by reopening; the persistent inline form needs the key.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Privacy save/cancel dialog with an inline _PrivacySection in the pane: advert-location + multi-ACKs toggles and the three telemetry-mode dropdowns now apply on change. All five commit through one setTelemetryModeBase call, so each control sends the full current state (coalesced via an apply guard) and reverts to the device's values on failure with an error snackbar -- folding in the #28 error handling for this pane. Removes the category->tile->dialog hop; drops _privacySettings.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flatten two more redundant layers in the settings IA. Radio Stats: extract CompanionRadioStatsScreen's body into an embeddable CompanionRadioStatsBody (carrying the 1s-polling acquire/release lifecycle), add a top-level Radio Stats category that renders it directly, and remove the nested Radio Stats tile from the Radio Settings pane (the screen is kept; still pushed from radio_stats_entry.dart). Rename the Contact Settings category to Contacts (reusing contacts_title) with a contacts icon; rename _messagesContactsPane to _contactsPane.
Also fixes a pre-existing chart-freeze surfaced by review: _NoiseChartPainter compared only sample-list length, so the noise chart stopped repainting once the 120-sample buffer filled. Now compares contents via listEquals.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Split the monolithic AppSettingsScreen (reached via a redundant tile->push from the App Settings category) into two embeddable views rendered directly in the shell panes: AppSettingsView (appearance, translation, battery, map, Cyr2Lat, debug) and MessageSettingsView (notifications + message handling, a new top-level 'Message Settings' category after Contacts). Removes the category->tile->separate-screen layer; each category now lands directly on its settings. Deletes app_settings_screen.dart (no remaining refs). Adds settings_messageSettings(+Subtitle) l10n keys (en template; other locales fall back pending the l10n sweep). Card bodies moved verbatim -- behavior preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the Contact-settings tile->modal dialog with an inline _AutoAddSection: five SwitchListTiles that apply on toggle (send config frame + refetch flags). Apply path has a coalescing guard (re-applies the latest state instead of overlapping sends) plus inline error handling (revert to device flags + snackbar). _PathHashSizeTile onChanged wrapped in try/catch + error snackbar.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Run dart format across the repo to clean drift in 5 files (channel_chat_screen, settings_screen, settings_shell, gif_picker, mention_autocomplete) from earlier straight-to-dev commits that never hit the format CI. No logic change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the monolithic card+dialog settings screen with a responsive master-detail shell (rail+pane when wide, list+push when narrow; layout chosen by width via LayoutBuilder). Regroup the existing settings into intent categories and surface Path Hash Size (1/2/3-byte) in Radio and range, the first device-config-parity gap (previously repeater/CLI-only).
No settings lost: every existing control stays reachable. Phase 0 of #7.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The maintainer's keyboard can't type emoji, so the composer now accepts
:shortcode: input with an inline autocomplete:
- Type `:` to open a bottom-anchored picker; arrows/Tab/click select, Esc
dismisses. Best/exact match sits at the bottom, nearest the caret.
- Enter completes an unambiguous emoji (single OR exact match) then sends,
so `:rofl` + Enter ships the glyph, not the literal text. Ambiguous
matches still send raw; Tab picks one deliberately.
- A completed `:name:` (closing colon) auto-converts in place.
- 1913 gemoji shortcodes bundled (lib/helpers/emoji_shortcodes.dart, MIT).
- Byte-count aware via the existing ByteCountedTextField; shares the
MentionAutocompleteField with @-mention input (both composers wired).
Version 9.0.0+12 -> 9.1.0+14 (MINOR feature; build kept monotonic after
the rebrand's +13 on the parallel chore/offband-rebrand branch).
Grid/tap picker deferred (#5 follow-up).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Typing @ at the start of a word opens a bottom-anchored dropdown above
the composer, filtered live by the text after @. Recent channel senders
sort to the bottom (most recent closest to the input, auto-highlighted);
other contacts stack above in alpha order (A nearest the input), with a
Recent divider between. Up/Down move the highlight, Tab or click selects
(inserting @[ExactName] at the cursor), Esc dismisses, Enter sends.
- New MentionAutocompleteField wrapping ByteCountedTextField with an
Overlay dropdown and FocusNode.onKeyEvent key handling
- _buildMentionCandidates sources recent senders from the channel
history plus contacts, deduped (recent wins)
Verified on desktop, including wrapped/multi-line input.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-length byte packs hop count (low 6 bits) and hash
width (high 2 bits) into one byte. The UI used it raw, so a 4-hop/2-byte
path showed as "68 hops" and the path list rendered per byte (8 entries
for 4 hops), and a 2-byte region mismatched a 1-byte one.
- Add pathHopCount/pathHashSizeBytes decoders (meshcore_protocol.dart)
- Add ChannelMessage.hopCount / pathHashSize getters; decode at display
and leave the stored pathLength untouched so the duplicate-merge in
the connector stays self-consistent
- Add an always-visible per-message hop-count badge in the channel chat
- Group path bytes into hash-width hashes in the chat "via" line and the
Message Details screen, using each packet's own width so mixed
1/2/3-byte feeds render correctly side by side
Verified against live BLE traffic (mixed 1-byte and 2-byte senders).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- channel_chat: always-visible HH:MM timestamps (theme-aware dark-mode contrast)
- channel_chat: Today/Yesterday/date day dividers between message days
- contacts: pin favorites to the top, preserving the active sort within each group
Fork of zjs81/meshcore-open (MIT). Tracking #2 (migrated from Strycher/LoRa#343).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The telemetry parser has been expanded and should now support significantly more metrics. It has been ported from the Python implementation of meshcore_py.
At the top of the channel chat screen is an icon, indicating the
channel type.
Previously, the public icon was used correctly, but the
hashtag icon was used for all other types.
Now, consistent with the channels screen, we use the lock icon for
private channels, and the composite icons for community public &
community hashtag types.
The fix for private channels was trivial, as we can identify hashtag
channels by their name. Finding out whether a channel belongs to a
community is much more involved. All the hard-working code was copied
from channels_screen.dart. (I tried refactoring to reduce duplication,
but my results were complex and not worth it.)
Closes#432
- Updated _RepeaterStatusScreenState to load status after the first frame to avoid mid-build notifyListeners() calls.
- Removed unused _statusRequestedAt variable and adjusted _clockText() to use repeaterClockAtLogin for time display.
- Enhanced _SettingsScreenState with a GPS toggle switch that updates custom variables for GPS settings.
- Cleaned up RepeaterCommandService by removing redundant pending command checks and adjusted command ID generation.
- Removed jni plugin from generated_plugins.cmake for both Linux and Windows platforms.
Per issue #418, this commmit removes channel subtitles from the channel
list and from the map screen (deep in the marker sharing). This reduces
visual clutter and allows for more compact lists, and the type of
channel is already indicated by the leading icon.
The subtitles simply said "Public channel", "Hashtag channel", or
"Private channel".
We also remove the relevant localization strings.
Strycher
HDDen
ericz
zjs81
Seth Golub
zjs81
Enot (ded) Skelly