Gemini MAJOR #4 (offset unverified / short-frame robustness):
- Offset VERIFIED against firmware MyMesh.cpp: the device-info tail is three
consecutive out_frame[i++] writes -- client_repeat@80, path_hash_mode@81,
offband_caps@82. Bytes 80/81 are shipping (path-hash), so caps@82 is correct
by adjacency, not a guess.
- Extracted MeshCoreConnector.parseOffbandCaps (pure, bounds-checked) so the
guard + offset are unit-testable; _handleDeviceInfo delegates to it.
- 4 tests pin: pre-v14 short frame -> null, len-83 reads byte 82 verbatim,
observer bit round-trips supportsConfig, hostile truncated frames never OOB.
Live observer node confirms end-to-end at G2.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- screens/settings/observer_settings_view.dart: staged-save pane for WiFi
(ssid/pwd/enabled), MQTT region (iata/status_interval), display
(always_on/rotation 0|180), with Save (changed keys only) + Refresh +
stale/error banners; the broker pool renders read-only (enable/clear await
the firmware F-task).
- settings_screen.dart: register the Observer category, gated on
ObserverConfigService.supported (re-evaluated as the connector's offband_caps
flips on connect/disconnect).
- connector/meshcore_connector.dart: parse the offband_caps byte (device-info
byte 82, after path_hash_mode) + expose offbandCaps.
- services/observer_config_service.dart: supported computed live from the
connector (version gate + cap bit).
- main.dart: provide ObserverConfigService.
Strings are English-only pending l10n ARB keys.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reflow the systemDevices.map(...) chain after the .where() removal so
`dart format --set-exit-if-changed .` is clean. No behavior change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The scanner filtered advertisements by device-name keyword
(withKeywords: deviceNamePrefixes), so any MeshCore/Offband device
whose advertised name fell outside the hardcoded prefix list was
invisible to the scanner — even though the official MeshCore app,
which scans by the Nordic UART service UUID, found them. Switch
startScan to withServices: [Guid(service)] and drop the now-redundant
name filter on the already-service-scoped systemDevices fallback.
Device-tested on a Samsung S25: a previously-invisible node now
appears in the scan.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CI's `dart format --set-exit-if-changed .` step is repo-wide. My A/B/C
commit hand-wrote the .catchError blocks without running the formatter,
and 2 settings views carried pre-existing format drift from #28. dart
format reflows all three (whitespace only, identical logic):
- lib/connector/meshcore_connector.dart (this PR's blocks)
- lib/screens/settings/app_settings_view.dart (pre-existing, #28)
- lib/screens/settings/message_settings_view.dart (pre-existing, #28)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DirectRepeater.ranking added recencyScore (0..1.8M) to the SNR term (1000/dB), so recency dominated (~1 dB == 1 second), contradicting the comment that recency only breaks ties. Scale recency to a 0-999 bonus so SNR (1000/dB) is primary and recency only decides sub-dB ties.
Offset SNR by its floor (+32; SX126x SNR spans -32..+31.75 dB) so every live ranking stays >= 0, above the -1 stale sentinel; otherwise the scaled-down recency leaves live rankings negative and a stale repeater would outrank a live one.
Adds DirectRepeater.ranking tests: SNR-first, recency tie-break, stale=-1, live-always-outranks-stale.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
disconnect() never resets the channel store scope (publicKeyHex), so a channel write in the post-disconnect async gap still persists -- to the last radio's scope, and into a different radio's scope after reconnecting (cross-radio bleed). Add if (!isConnected) return; to the UI-triggered persisters setChannelUnreadCount, markChannelRead, setChannelOrder. Chosen over clearing _channels, which would risk a racing mutator persisting an empty list and wiping stored channels.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Query FlutterBluePlus.systemDevices on every native platform (was Linux-only)
so a radio already connected to another central -- e.g. Liam's MeshCore app --
appears in the picker and we attach to the existing link. A connected BLE radio
stops advertising, so a scan alone never finds it.
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two more connector silent-failures from the review. requestRadioStats had an empty 'catch (_) {}' (now logs). setChannelUnreadCount fired unawaited(saveChannels) with no error path (now .catchError + logs). Verified: setContactUnreadCount calls a void debounced store method -- no call-site Future (Gemini false positive); the actual swallow is inside unread_store's debounce timer, flagged separately.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
BLE onValueReceived.listen had no onError, while USB (L1557) and TCP (L1669) both attach one that logs and gracefully disconnects; an error emission on the BLE notify stream was unhandled. Add a matching onError. Also await sendMessageWithRetry in the reaction branch of sendMessage -- the normal path already awaits it; the reaction path's unawaited call swallowed failures, contradicting its own 'same as normal messages' comment.
Verified, not assumed: Gemini's 'disconnect() not try-caught' was a FALSE POSITIVE (already wrapped at L2484-2489); 'deleteAllPaths silent void' is a sync in-memory clear (no async failure path). flutter analyze clean; Gemini-reviewed with no critique of these two changes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-length byte packs hop count (low 6 bits) and hash
width (high 2 bits) into one byte. The UI used it raw, so a 4-hop/2-byte
path showed as "68 hops" and the path list rendered per byte (8 entries
for 4 hops), and a 2-byte region mismatched a 1-byte one.
- Add pathHopCount/pathHashSizeBytes decoders (meshcore_protocol.dart)
- Add ChannelMessage.hopCount / pathHashSize getters; decode at display
and leave the stored pathLength untouched so the duplicate-merge in
the connector stays self-consistent
- Add an always-visible per-message hop-count badge in the channel chat
- Group path bytes into hash-width hashes in the chat "via" line and the
Message Details screen, using each packet's own width so mixed
1/2/3-byte feeds render correctly side by side
Verified against live BLE traffic (mixed 1-byte and 2-byte senders).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The telemetry parser has been expanded and should now support significantly more metrics. It has been ported from the Python implementation of meshcore_py.
Reflect the set value immediately so UI bound to currentCustomVars
(e.g. the GPS toggle in settings) updates on tap rather than waiting
for a later device-info refresh.
- Updated _RepeaterStatusScreenState to load status after the first frame to avoid mid-build notifyListeners() calls.
- Removed unused _statusRequestedAt variable and adjusted _clockText() to use repeaterClockAtLogin for time display.
- Enhanced _SettingsScreenState with a GPS toggle switch that updates custom variables for GPS settings.
- Cleaned up RepeaterCommandService by removing redundant pending command checks and adjusted command ID generation.
- Removed jni plugin from generated_plugins.cmake for both Linux and Windows platforms.
The function emitted two consecutive 8-byte position blocks instead of
one, producing a frame 8 bytes longer than the documented layout. When
a caller passed lastModified, the firmware parsed the duplicated second
lat as the timestamp, giving wildly wrong "last seen" values on
imported contacts.
Delete the unconditional first block; keep the conditional block that
correctly skips the optional tail when neither location nor
lastModified is set, zero-fills position slots when only lastModified
is present, and appends the optional timestamp.
Adds test/connector/build_update_contact_path_frame_test.dart with
five cases covering all four optional-tail combinations plus the
fixed-point lat/lon encoding.
Fixes#427
- Add "Mark as Unread" option to message context menu in both
contact and channel chats
- Show "New messages" divider line between read and unread messages
- Add setContactUnreadCount/setChannelUnreadCount methods to connector
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Strycher
HDDen
ericz
ZIER
zjs81
Serge Tarkovski
Max Cooley
zjs81
kingult
Ded
Dmitry Polshakov