6.0.24.16

AGWAPI.c

@@ -55,11 +55,14 @@ struct AGWSocketConnectionInfo
 	BOOL SocketActive;
     BOOL RawFlag;
     BOOL MonFlag;
+    BOOL useLocalTime;
+    BOOL doNodes;
     unsigned char CallSign1[10];
     unsigned char CallSign2[10];
     BOOL GotHeader;
     int MsgDataLength;
     struct AGWHeader AGWRXHeader; 
+	unsigned char * MsgData; 
 };
 
 struct BPQConnectionInfo
@@ -75,8 +78,6 @@ struct BPQConnectionInfo
 
 char AGWPorts[1000];
 
-byte AGWMessage[1000];
-
 struct AGWHeader AGWTXHeader;
 
 char SessionList[100];
@@ -127,7 +128,7 @@ int DataSocket_Write(struct AGWSocketConnectionInfo * sockptr, SOCKET sock);
 int AGWGetSessionKey(char * key, struct AGWSocketConnectionInfo * sockptr);
 int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr);
 int SendDataToAppl(int Stream, byte * Buffer, int Length);
-int InternalAGWDecodeFrame(char * msg, char * buffer, int Stamp, int * FrameType);
+int InternalAGWDecodeFrame(char * msg, char * buffer, int Stamp, int * FrameType, int useLocalTime, int doNodes);
 int AGWDataSocket_Disconnect( struct AGWSocketConnectionInfo * sockptr);
 int SendRawPacket(struct AGWSocketConnectionInfo * sockptr, char *txmsg, int Length);
 int ShowApps();
@@ -686,7 +687,7 @@ int AGWDoMonitorData()
 	byte AGWBuffer[1000];
 	int n;
 	int Stamp, Frametype;
-	BOOL RXFlag, NeedAGW;
+	BOOL RXFlag;
 
 	// Look for Monitor Data
 
@@ -731,24 +732,16 @@ int AGWDoMonitorData()
 		    RXFlag = TRUE;
 		}
 
-		NeedAGW = FALSE;
+		// Can now have different mon flags per connection, so need to run decode for each socket
 
 		for (n = 1; n<= CurrentSockets; n++)
 		{
-			sockptr=&Sockets[n];
-
-			if (sockptr->SocketActive && sockptr->MonFlag) NeedAGW = TRUE;
-		}
+			sockptr = &Sockets[n];
 
-		if (NeedAGW)
-		{
-			if (RXFlag || LoopMonFlag)    // only send txed frames if requested
+			if (sockptr->SocketActive && sockptr->MonFlag && (RXFlag || LoopMonFlag))
 			{
-				Length = InternalAGWDecodeFrame(Buffer, AGWBuffer,Stamp, &Frametype);
+				Length = InternalAGWDecodeFrame(Buffer, AGWBuffer, Stamp, &Frametype, sockptr->useLocalTime, sockptr->doNodes);
 
-				//
-				//   Decode frame and send to applications which have requested monitoring
-				//
 				if (Length > 0)
 				{
 					AGWTXHeader.Port = Port - 1;       // AGW Ports start from 0
@@ -786,13 +779,7 @@ int AGWDoMonitorData()
 					memset(AGWTXHeader.callfrom, 0,10);
 					ConvFromAX25(monbuff->ORIGIN, AGWTXHeader.callfrom);
        
-	 				for (n = 1; n<= CurrentSockets; n++)
-					{
-						sockptr=&Sockets[n];
-        
-						if (sockptr->SocketActive && sockptr->MonFlag)
-							SendRawPacket(sockptr, AGWBuffer, Length);
-					}
+					SendRawPacket(sockptr, AGWBuffer, Length);
 				}
 			}
 		}
@@ -1040,9 +1027,12 @@ int AGWDataSocket_Read(struct AGWSocketConnectionInfo * sockptr, SOCKET sock)
 		{
 			//   Read Data and Process Command
 
-			i=recv(sock, AGWMessage, sockptr->MsgDataLength, 0);
+			sockptr->MsgData = malloc(sockptr->MsgDataLength);
+    
+			i = recv(sock, sockptr->MsgData, sockptr->MsgDataLength, 0);
 
 			ProcessAGWCommand (sockptr);
+			free(sockptr->MsgData);
         
 			sockptr->GotHeader = FALSE;
 		}
@@ -1168,7 +1158,7 @@ int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr)
 			{
 				// Have digis
 
-				char * Digis = AGWMessage;
+				char * Digis = sockptr->MsgData;
 				int nDigis = Digis[0];
 
 				Digis ++;
@@ -1205,7 +1195,7 @@ int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr)
 		{
 			if (memcmp(AGWConnections[con].CallKey,key,21) == 0)
 			{
-				SendMsg(AGWConnections[con].BPQStream, AGWMessage, sockptr->MsgDataLength);
+				SendMsg(AGWConnections[con].BPQStream, sockptr->MsgData, sockptr->MsgDataLength);
 				return 0;
 			}
 		}
@@ -1294,7 +1284,7 @@ int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr)
 
         // Send Raw Frame
 
-		SendRaw(sockptr->AGWRXHeader.Port+1,&AGWMessage[1], sockptr->MsgDataLength - 1);
+		SendRaw(sockptr->AGWRXHeader.Port+1,&sockptr->MsgData[1], sockptr->MsgDataLength - 1);
         
 		return 0;
 
@@ -1302,7 +1292,20 @@ int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr)
      
        //   Toggle Monitor receive
 
-        sockptr->MonFlag = !sockptr->MonFlag;
+		if (sockptr->AGWRXHeader.DataLength == 12)			// QtTermTCP monitor info
+		{
+//				Msg[AGWHDDRRLEN] = AGWUsers->MonSess->mlocaltime;
+//	Msg[AGWHDDRRLEN + 1] = AGWUsers->MonSess->MonitorNODES;
+	//Msg[AGWHDDRRLEN + 2] = AGWUsers->MonSess->MonitorColour;
+//	Msg[AGWHDDRRLEN + 3] = AGWUsers->MonSess->mtxparam;
+//	memcpy(&Msg[AGWHDDRRLEN + 4], (void *)&AGWUsers->MonSess->portmask, 8);
+			sockptr->useLocalTime = sockptr->MsgData[0];
+			sockptr->doNodes =  sockptr->MsgData[1];
+			sockptr->MonFlag = 1;
+		}
+		else
+			sockptr->MonFlag = !sockptr->MonFlag;
+
 		return 0;
     
   
@@ -1318,11 +1321,11 @@ int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr)
 
         if (sockptr->AGWRXHeader.DataKind == 'V')	// Unproto with VIA string
 		{        
-            Digis = AGWMessage[0];                 // Number of digis
+            Digis = sockptr->MsgData[0];                 // Number of digis
                     
 			for (j = 1; j<= Digis; j++)
 			{
-				ConvToAX25(&AGWMessage[(j - 1) * 10 + 1],&TXMessage[7+(j*7)]);      // No "last" bit
+				ConvToAX25(&sockptr->MsgData[(j - 1) * 10 + 1],&TXMessage[7+(j*7)]);      // No "last" bit
 			}
 
 			// set end of call 
@@ -1342,7 +1345,7 @@ int ProcessAGWCommand(struct AGWSocketConnectionInfo * sockptr)
 		else
             *(TXMessageptr++) = sockptr->AGWRXHeader.PID; 
    
-        memcpy(TXMessageptr,&AGWMessage[MsgStart], sockptr->MsgDataLength - MsgStart);
+        memcpy(TXMessageptr,&sockptr->MsgData[MsgStart], sockptr->MsgDataLength - MsgStart);
         
 		TXMessageptr += (sockptr->MsgDataLength - MsgStart);
 

AGWMoncode.c

@@ -64,12 +64,12 @@ along with LinBPQ/BPQ32.  If not, see http://www.gnu.org/licenses
 char * strlop(char * buf, char delim);
 UCHAR * DisplayINP3RIF(UCHAR * ptr1, UCHAR * ptr2, int msglen);
 
-static UCHAR * DISPLAY_NETROM(MESSAGE * ADJBUFFER, UCHAR * Output, int MsgLen);
+static UCHAR * DISPLAY_NETROM(MESSAGE * ADJBUFFER, UCHAR * Output, int MsgLen, int DoNodes);
 static UCHAR * DISPLAYIPDATAGRAM(IPMSG * IP, UCHAR * Output, int MsgLen);
 static UCHAR * DISPLAYARPDATAGRAM(UCHAR * Datagram, UCHAR * Output);
 
 
-int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameType)
+int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameType, int useLocalTime, int DoNodes)
 {
 	UCHAR * ptr;
 	int n;
@@ -81,7 +81,6 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 	char PFCHAR[3] = "  ";
 	int MSGFLAG = 0;		//CR and V1 flags
 	char * Output = buffer;
-	int HH, MM, SS;
 	char From[10], To[10];
 	BOOL Info = 0;
 	BOOL FRMRFLAG = 0;
@@ -89,6 +88,13 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 	BOOL TESTFLAG = 0;
 	size_t MsgLen = msg->LENGTH;
 
+	struct tm * TM;
+
+	if (useLocalTime)
+		TM = localtime(&Stamp);
+	else
+		TM = gmtime(&Stamp);
+
 	//	GET THE CONTROL BYTE, TO SEE IF THIS FRAME IS TO BE DISPLAYED
 
 	n = 8;						// MAX DIGIS
@@ -124,14 +130,6 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 
 	*FrameType = CTL;
 
-	Stamp = Stamp % 86400;		// Secs
-	HH = Stamp / 3600;
-
-	Stamp -= HH * 3600;
-	MM = Stamp  / 60;
-
-	SS = Stamp - MM * 60;
-
 	Output += sprintf((char *)Output, " %d:Fm ", msg->PORT & 0x7f);		// Mask TX bit
 
 	From[ConvFromAX25(msg->ORIGIN, From)] = 0;
@@ -297,7 +295,7 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 
 	}
 
-	Output += sprintf((char *)Output, "[%02d:%02d:%02d]", HH, MM, SS);
+	Output += sprintf((char *)Output, "[%02d:%02d:%02d]", TM->tm_hour, TM->tm_min, TM->tm_sec);
 
 
 	if (FRMRFLAG)
@@ -345,7 +343,7 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 		}
 		case NETROM_PID:
 			
-			Output = DISPLAY_NETROM(ADJBUFFER, Output,(int) MsgLen);
+			Output = DISPLAY_NETROM(ADJBUFFER, Output,(int) MsgLen, DoNodes);
 			break;
 
 		case IP_PID:
@@ -366,6 +364,9 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 		}
 	}
 
+	if (Output == NULL)
+		return NULL;
+
 	if (Output[-1] != 13)
 		Output += sprintf((char *)Output, "\r");
 
@@ -374,7 +375,7 @@ int InternalAGWDecodeFrame(MESSAGE * msg, char * buffer, int Stamp, int * FrameT
 }
 //      Display NET/ROM data                                                 
 
-UCHAR * DISPLAY_NETROM(MESSAGE * ADJBUFFER, UCHAR * Output, int MsgLen)
+UCHAR * DISPLAY_NETROM(MESSAGE * ADJBUFFER, UCHAR * Output, int MsgLen, int DoNodes)
 {
 	char Alias[7]= "";
 	char Dest[10];
@@ -386,6 +387,8 @@ UCHAR * DISPLAY_NETROM(MESSAGE * ADJBUFFER, UCHAR * Output, int MsgLen)
 	{
 		// Display NODES
 
+		if (DoNodes == 0)
+			return NULL;
 
 		// If an INP3 RIF (type <> UI) decode as such
 	

APRSCode.c

@@ -2552,6 +2552,8 @@ VOID SendAPRSMessageEx(char * Message, int toPort, char * FromCall, int Gated)
 			else
 				continue;
 
+			Msg.DEST[6] |= 0x80;			// set Command Bit
+
 			ConvToAX25(FromCall, Msg.ORIGIN);
 			Msg.PID = 0xf0;
 			Msg.CTL = 3;
@@ -2580,6 +2582,8 @@ VOID SendAPRSMessageEx(char * Message, int toPort, char * FromCall, int Gated)
 	else
 		return;
 
+	Msg.DEST[6] |= 0x80;			// set Command Bit
+
 	ConvToAX25(FromCall, Msg.ORIGIN);
 	Msg.PID = 0xf0;
 	Msg.CTL = 3;
@@ -2756,6 +2760,7 @@ void SendBeaconThread(void * Param)
 		Debugprintf("Sending APRS Beacon to port %d", toPort);
 
 		memcpy(Msg.DEST, &BeaconHeader[toPort][0][0], 10 * 7);		// Clear unused digis
+		Msg.DEST[6] |= 0x80;			// set Command Bit
 
 		GetSemaphore(&Semaphore, 12);
 		Send_AX_Datagram(&Msg, Len + 2, toPort);
@@ -2780,6 +2785,8 @@ void SendBeaconThread(void * Param)
 			Msg.CTL = 3;
 
 			memcpy(Msg.DEST, &BeaconHeader[Port][0][0], 10 * 7);
+			Msg.DEST[6] |= 0x80;			// set Command Bit
+
 			GetSemaphore(&Semaphore, 12);
 			Send_AX_Datagram(&Msg, Len + 2, Port);
 			FreeSemaphore(&Semaphore);
@@ -2815,6 +2822,8 @@ VOID SendObject(struct OBJECT * Object)
 			Msg.CTL = 3;
 			Len = sprintf(Msg.L2DATA, "%s", Object->Message);
 			memcpy(Msg.DEST, &Object->Path[0][0],  Object->PathLen + 1);
+			Msg.DEST[6] |= 0x80;			// set Command Bit
+
 			Send_AX_Datagram(&Msg, Len + 2, Port);
 		}
 	}
@@ -2881,6 +2890,8 @@ VOID SendIStatus()
 			if (BeaconHddrLen[Port])		// Only send to ports with a DEST defined
 			{
 				memcpy(Msg.DEST, &BeaconHeader[Port][0][0], 10 * 7);
+				Msg.DEST[6] |= 0x80;			// set Command Bit
+
 				Send_AX_Datagram(&Msg, Len + 2, Port);
 			}
 		}

AlertWords.txt

@@ -0,0 +1,2 @@
+g8bpq
+very bad phrase

BPQChat.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQChat.vcproj.SKIGACER.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQMail.c

@@ -1120,7 +1120,10 @@
 
 //  6.0.25.1  ?? 
 
-//	Aff FBB reject.sys style filters (3)
+//	Add  FBB reject.sys style filters (3)
+//	Improve Webmail on 64 bit builds
+
+
 
 #include "bpqmail.h"
 #include "winstdint.h"

BPQMail.vcproj

@@ -68,7 +68,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalDependencies="..\lib\bpq32.lib wsock32.lib comctl32.lib winmm.lib ..\lib\libconfig.lib DbgHelp.lib"
-				OutputFile="d:\DevProgs\bpq32\BPQMail.exe"
+				OutputFile="c:\DevProgs\bpq32\BPQMail.exe"
 				LinkIncremental="2"
 				IgnoreAllDefaultLibraries="false"
 				IgnoreDefaultLibraryNames="LIBCMT"

BPQMail.vcproj.DESKTOP-MHE5LO8.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-MHE5LO8"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-MHE5LO8"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQMail.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQMail.vcproj.HPLAPTOP.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="HPLAPTOP"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="HPLAPTOP"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQMail.vcproj.SKIGACER.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQRemotePTT.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQWinAPP.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

BPQWinAPP.vcproj.SKIGACER.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

Bpq32.c

@@ -1193,7 +1193,9 @@ along with LinBPQ/BPQ32.  If not, see http://www.gnu.org/licenses
 //	Add SDRAngel rig control (11)
 //	Add option to specify config and data directories on linbpq (12)
 //	Allow zero resptime (send RR immediately) (13)
-//	Fix corruptions in Webmail on 64 bit builds, eg in displaying 7+ files (15)
+//	Make sure CMD bit is set on UI frames
+//	Add setting Modem Flags in QtSM AGW mode
+//	If FT847 om PTC Port send a "Cat On" command (16)
 
 #define CKernel
 
@@ -1602,7 +1604,7 @@ char PopupText[30][100] = {""};
 // Next 3 should be uninitialised so they are local to each process
 
 UCHAR	MCOM;
-UCHAR	MTX;
+UCHAR	MTX;						// Top bit indicates use local time
 uint64_t MMASK;
 UCHAR	MUIONLY;
 

CBPQ32.vcproj.DESKTOP-MHE5LO8.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="c:\devprogs\bpq32\bpq32.exe"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-MHE5LO8"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor="0"
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command=""
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-MHE5LO8"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

CBPQ32.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="C:\Devprogs\BPQ32\bpq32.exe"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="C:\Devprogs\BPQ32\bpq32.exe"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

CBPQ32.vcproj.HPLAPTOP.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="C:\Devprogs\BPQ32\bpq32.exe"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="HPLAPTOP"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command=""
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="HPLAPTOP"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

CBPQ32.vcproj.SKIGACER.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="C:\DevProgs\BPQ32\bpq32.exe"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="C:\DevProgs\BPQ32\bpq32.exe"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

Cmd.c

@@ -2157,6 +2157,7 @@ VOID CQCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CM
 
 	ConvToAX25("CQ", CQCALL);
 	memcpy(Msg.DEST, CQCALL, 7);
+	Msg.DEST[6] |= 0x80;			// set Command Bit
 	memcpy(Msg.ORIGIN, Session->L4USER, 7);
 	Msg.ORIGIN[6] ^= 0x1e;					// Flip SSID
 	Msg.PID = 0xf0;							// Data PID
@@ -4714,6 +4715,7 @@ VOID InnerCommandHandler(TRANSPORTENTRY * Session, struct DATAMESSAGE * Buffer)
 		Msg.PORT = Port;
 		Msg.CTL = 3;			// UI
 		memcpy(Msg.DEST, Session->UADDRESS, 7);
+		Msg.DEST[6] |= 0x80;			// set Command Bit
 		memcpy(Msg.ORIGIN, Session->L4USER, 7);
 		memcpy(Msg.DIGIS, &Session->UADDRESS[7], Session->UAddrLen - 7);
 		memcpy(&Msg.PID, &Buffer->PID, Len);
@@ -5789,6 +5791,7 @@ VOID HELPCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX *
 
 int UZ7HOSetFreq(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMESSAGE buff, PMSGWITHLEN buffptr);
 int UZ7HOSetModem(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMESSAGE buff, PMSGWITHLEN buffptr);
+int UZ7HOSetFlags(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMESSAGE buff, PMSGWITHLEN buffptr);
 
 
 VOID UZ7HOCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX * CMD)
@@ -5822,7 +5825,7 @@ VOID UZ7HOCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX *
 		return;
 	}
 
-	if (_memicmp(Cmd, "FREQ", 4) == 0 || _memicmp(Cmd, "MODEM", 5) == 0)
+	if (_memicmp(Cmd, "FREQ", 4) == 0 || _memicmp(Cmd, "MODEM", 5) == 0 || _memicmp(Cmd, "FLAGS", 5) == 0)
 	{
 		// Pass to procesing code in UZ7HO driver. This expects command in a PDATAMESSAGE amd places response in a PMSGWITHLEN buffer
 
@@ -5844,6 +5847,8 @@ VOID UZ7HOCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX *
 
 		if (_memicmp(Cmd, "FREQ", 4) == 0)
 			UZ7HOSetFreq(port, TNC, AGW, buff, buffptr);
+		else if (_memicmp(Cmd, "FLAGS", 5) == 0)
+			UZ7HOSetFlags(port, TNC, AGW, buff, buffptr);
 		else
 			UZ7HOSetModem(port, TNC, AGW, buff, buffptr);
 
@@ -5854,7 +5859,7 @@ VOID UZ7HOCMD(TRANSPORTENTRY * Session, char * Bufferptr, char * CmdTail, CMDX *
 		ReleaseBuffer(buffptr);
 	}
 	else
-		Bufferptr = Cmdprintf(Session, Bufferptr, "Invalid UZ7HO Command (not Freq or Modem)\r");
+		Bufferptr = Cmdprintf(Session, Bufferptr, "Invalid UZ7HO Command (not Freq Modem or FLAGS)\r");
 	
 	SendCommandReply(Session, REPLYBUFFER, (int)(Bufferptr - (char *)REPLYBUFFER));
 	return;

IPCode.c

@@ -1271,6 +1271,8 @@ static VOID Send_AX_Datagram(PMESSAGE Block, DWORD Len, UCHAR Port, UCHAR * HWAD
 	memcpy(Block->DEST, HWADDR, 7);
 	memcpy(Block->ORIGIN, MYCALL, 7);
 	Block->DEST[6] &= 0x7e;						// Clear End of Call
+	Block->DEST[6] |= 0x80;						// set Command Bit
+
 	Block->ORIGIN[6] |= 1;						// Set End of Call
 	Block->CTL = 3;		//UI
 

L4Code.c

@@ -1297,14 +1297,11 @@ VOID CONNECTREQUEST(struct _LINKTABLE * LINK, L3MESSAGEBUFFER * L3MSG, UINT Appl
 	char BPQPARAMS[10];				// Extended Connect Params from BPQ Node
 	int CONERROR;
 	int Index;
-	char xxx[16] = "";
 
 	memcpy(BPQPARAMS, &L4T1, 2);	// SET DEFAULT T1 IN CASE NOT FROM ANOTHER BPQ NODE
 
 	BPQPARAMS[2] = 0;				// 'SPY' NOT SET	
 
-	ConvFromAX25(&L3MSG->L4DATA[1], xxx);
-
 	if (CheckExcludeList(&L3MSG->L4DATA[1]) == 0)
 	{
 		SendConNAK(LINK, L3MSG);

MCP2221.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

MailNode.vcproj.DESKTOP-MHE5LO8.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-MHE5LO8"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-MHE5LO8"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

MailNode.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory="C:\linbpq"
-				CommandArguments="-h"
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor="0"
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

MailNode.vcproj.HPLAPTOP.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="HPLAPTOP"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="HPLAPTOP"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

MailNode.vcproj.SKIGACER.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory="c:\linbpq"
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor="0"
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

MailNode.vcxproj.user

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <LocalDebuggerCommand>C:\Dev\Msdev2005\projects\bpq32\BPQMail\x64\Debug\LinBPQ.exe</LocalDebuggerCommand>
+    <LocalDebuggerWorkingDirectory>c:\linbpq</LocalDebuggerWorkingDirectory>
+    <DebuggerFlavor>WindowsLocalDebugger</DebuggerFlavor>
+  </PropertyGroup>
+</Project>

Moncode.c

@@ -163,7 +163,6 @@ int IntDecodeFrame(MESSAGE * msg, char * buffer, time_t Stamp, uint64_t Mask, BO
 	int Port;
 	int MSGFLAG = 0;		//CR and V1 flags
 	char * Output = buffer;
-	int HH, MM, SS;
 	char TR = 'R';
 	char From[10], To[10];
 	BOOL Info = 0;
@@ -173,6 +172,15 @@ int IntDecodeFrame(MESSAGE * msg, char * buffer, time_t Stamp, uint64_t Mask, BO
 
 	size_t MsgLen = msg->LENGTH;
 
+	// Use gmtime so we can also display in local time
+
+	struct tm * TM;
+
+	if (MTX & 0x80)
+		TM = localtime(&Stamp);
+	else
+		TM = gmtime(&Stamp);
+
 	// MINI mode is for Node Listen (remote monitor) Mode. Keep info to minimum
 /*
 KO6IZ*>K7TMG-1:
@@ -190,7 +198,7 @@ KC6OAR*>ID:
 	
 	if (Port & 0x80)
 	{
-		if (MTX == 0)
+		if ((MTX & 1) == 0)
 			return 0;							//	TRANSMITTED FRAME - SEE IF MTX ON
 		
 		TR = 'T';
@@ -214,17 +222,9 @@ KC6OAR*>ID:
 
 		// Need Timestamp and T/R
 
-		Stamp = Stamp % 86400;		// Secs
-		HH = (int)(Stamp / 3600);
-
-		Stamp -= HH * 3600;
-		MM = (int)(Stamp  / 60);
-
-		SS = (int)(Stamp - MM * 60);
-
 		// Add Port: unless Mail Mon (port 64)
 
-		Output += sprintf((char *)Output, "%02d:%02d:%02d%c ", HH, MM, SS, TR);
+		Output += sprintf((char *)Output, "%02d:%02d:%02d%c ", TM->tm_hour, TM->tm_min, TM->tm_sec, TR);
 
 		strcpy(Output, &msg->DEST[1]);
 		Output += strlen(Output);
@@ -286,18 +286,10 @@ KC6OAR*>ID:
 	}
 
 
-	Stamp = Stamp % 86400;		// Secs
-	HH = (int)(Stamp / 3600);
-
-	Stamp -= HH * 3600;
-	MM = (int)(Stamp  / 60);
-
-	SS = (int)(Stamp - MM * 60);
-
 	// Add Port: if MINI mode and monitoring more than one port
 
 	if (MINI == 0)
-		Output += sprintf((char *)Output, "%02d:%02d:%02d%c ", HH, MM, SS, TR);
+		Output += sprintf((char *)Output, "%02d:%02d:%02d%c ", TM->tm_hour, TM->tm_min, TM->tm_sec, TR);
 	else
 		if (CountBits64(Mask) > 1)
 			Output += sprintf((char *)Output, "%d:", Port);

QtTermTCP.ini

@@ -1,120 +0,0 @@
-[General]
-HostParams0=|0||||
-HostParams1=|0||||
-HostParams2=|0||||
-HostParams3=|0||||
-HostParams4=|0||||
-HostParams5=|0||||
-HostParams6=|0||||
-HostParams7=|0||||
-HostParams8=|0||||
-HostParams9=|0||||
-HostParams10=|0||||
-HostParams11=|0||||
-HostParams12=|0||||
-HostParams13=|0||||
-HostParams14=|0||||
-HostParams15=|0||||
-Split=50
-ChatMode=1
-AutoTeletext=0
-Bells=1
-StripLF=1
-AlertBeep=1
-ConnectBeep=1
-AlertInterval=300
-CurrentHost=0 0 0 0 0 0 0 0 0 0
-YAPPPath=
-MaxRXSize=100000
-listenPort=8015
-listenEnable=0
-listenCText=
-convUTF8=0
-PTT=None
-PTTBAUD=19200
-PTTMode=19200
-CATHex=1
-PTTOffString=
-PTTOnString=
-pttGPIOPin=17
-pttGPIOPinR=17
-CM108Addr=0xD8C:0x08
-HamLibPort=4532
-HamLibHost=127.0.0.1
-FLRigPort=12345
-FLRigHost=127.0.0.1
-AGWEnable=0
-AGWMonEnable=0
-AGWTermCall=
-AGWBeaconDest=
-AGWBeaconPath=
-AGWBeaconInterval=0
-AGWBeaconPorts=
-AGWBeaconText=
-AGWHost=127.0.0.1
-AGWPort=8000
-AGWPaclen=80
-AGWToCalls=
-KISSEnable=0
-MYCALL=
-KISSHost=127.0.0.1
-KISSMode=0
-KISSPort=8100
-KISSSerialPort=None
-KISSBAUD=19200
-VARAEnable=0
-VARATermCall=
-VARAHost=127.0.0.1
-VARAPort=8300
-VARAInit=
-VARAPath=C:\\VARA\\VARA.exe
-VARAHostHF=127.0.0.1
-VARAPortHF=8300
-VARAPathHF=C:\\VARA\\VARA.exe
-VARAHostFM=127.0.0.1
-VARAPortFM=8300
-VARAPathFM=C:\\VARA\\VARAFM.exe
-VARAHostSAT=127.0.0.1
-VARAPortSAT=8300
-VARAPathSAT=C:\\VARA\\VARASAT.exe
-VARA500=0
-VARA2300=1
-VARA2750=0
-VARAHF=1
-VARAFM=0
-VARASAT=0
-TabType=1 1 1 1 1 1 1 2 2 0
-AutoConnect=0 0 0 0 0 0 0 0 0 0
-monBackground=@Variant(\0\0\0\x43\x1\xff\xff\xff\xff\xff\xff\xff\xff\0\0)
-monRxText=@Variant(\0\0\0\x43\x1\xff\xff\0\0\0\0\xff\xff\0\0)
-monTxText=@Variant(\0\0\0\x43\x1\xff\xff\xff\xff\0\0\0\0\0\0)
-monOtherText=@Variant(\0\0\0\x43\x1\xff\xff\0\0\0\0\0\0\0\0)
-termBackground=@Variant(\0\0\0\x43\x1\xff\xff\xff\xff\xff\xff\xff\xff\0\0)
-outputText=@Variant(\0\0\0\x43\x1\xff\xff\0\0\0\0\xff\xff\0\0)
-EchoText=@Variant(\0\0\0\x43\x1\xff\xff\0\0\0\0\0\0\0\0)
-WarningText=@Variant(\0\0\0\x43\x1\xff\xff\xff\xff\0\0\0\0\0\0)
-inputBackground=@Variant(\0\0\0\x43\x1\xff\xff\xff\xff\xff\xff\xff\xff\0\0)
-inputText=@Variant(\0\0\0\x43\x1\xff\xff\0\0\0\0\0\0\0\0)
-useBeep=false
-geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x3\0\0\0\0\x2\x39\0\0\0\xab\0\0\x5\x45\0\0\x3\x64\0\0\x2\x39\0\0\0\xab\0\0\x5\x45\0\0\x3\x64\0\0\0\0\0\0\0\0\a\x80\0\0\x2\x39\0\0\0\xab\0\0\x5\x45\0\0\x3\x64)
-windowState=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\0\0\0\x3\r\0\0\x2\xa4\0\0\0\x4\0\0\0\x4\0\0\0\b\0\0\0\b\xfc\0\0\0\x1\0\0\0\x3\0\0\0\x1\0\0\0\x16\0m\0\x61\0i\0n\0T\0o\0o\0l\0\x62\0\x61\0r\0\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0)
-ConnectWAV=C:/OneDrive/Dev/Source/bpq32/CommonSource/Ring.wav
-
-[AX25_A]
-Retries=10
-Maxframe=4
-Paclen=128
-FrackTime=8
-IdleTime=180
-SlotTime=100
-Persist=128
-RespTime=1500
-TXFrmMode=1
-FrameCollector=6
-ExcludeCallsigns=
-ExcludeAPRSFrmType=
-KISSOptimization=0
-DynamicFrack=0
-BitRecovery=0
-IPOLL=80
-MyDigiCall=

RigControl.c

@@ -2230,7 +2230,7 @@ DllExport BOOL APIENTRY Rig_Init()
 	TNC->ClientHeight = NeedRig * 20 + 60;
 	TNC->ClientWidth = 550;
 
-	for (port = 0; port < 33; port++)
+	for (port = 0; port < MAXBPQPORTS; port++)
 	{
 		if (RadioConfigMsg[port])
 		{
@@ -2263,7 +2263,7 @@ DllExport BOOL APIENTRY Rig_Init()
 				struct TNCINFO * PTCTNC;
 				int n;
 
-				for (n = 1; n < 33; n++)
+				for (n = 1; n < MAXBPQPORTS; n++)
 				{
 					PTCTNC = TNCInfo[n];
 
@@ -2346,7 +2346,6 @@ DllExport BOOL APIENTRY Rig_Init()
 		{
 			SDRANGELRunning = 1;
 			ConnecttoSDRANGEL(PORT);
-
 		}
 //---- G7TAJ ----
 		else if (PORT->HIDDevice)		// This is RAWHID, Not CM108
@@ -2363,6 +2362,15 @@ DllExport BOOL APIENTRY Rig_Init()
 		}
 		else
 			PORT->hPTTDevice = PORT->hDevice;	// Use same port for PTT
+
+
+		// Looks like FT847 Needa a "Cat On" Command. If PTC port need to send it here
+
+		if (PORT->PTC && strcmp(PORT->Rigs[0].RigName, "FT847") == 0)
+		{
+			UCHAR CATON[6] = {0,0,0,0,0};
+			SendPTCRadioCommand(PORT->PTC, CATON, 5);
+		}
 	}
 
 	for (p = 0; p < NumberofPorts; p++)
@@ -2573,7 +2581,7 @@ DllExport BOOL APIENTRY Rig_Close()
 
 	// And free the TNC config info
 
-	for (p = 1; p < 33; p++)
+	for (p = 1; p < MAXBPQPORTS; p++)
 	{
 		TNC = TNCInfo[p];
 
@@ -2788,7 +2796,6 @@ int OpenRigCOMMPort(struct RIGPORTINFO * PORT, VOID * Port, int Speed)
 		COMClearDTR(PORT->hDevice);
 	else
 		COMSetDTR(PORT->hDevice);
-
 	if (strcmp(PORT->Rigs[0].RigName, "FT847") == 0)
 	{
 		// Looks like FT847 Needa a "Cat On" Command
@@ -2798,6 +2805,7 @@ int OpenRigCOMMPort(struct RIGPORTINFO * PORT, VOID * Port, int Speed)
 		WriteCOMBlock(PORT->hDevice, CATON, 5);
 	}
 
+
 	if (PORT->PortType == NMEA)
 	{
 		// Looks like NMEA Needs Remote ON
@@ -7310,7 +7318,7 @@ VOID SetupScanInterLockGroups(struct RIGINFO *RIG)
 
 	// Find TNC ports in this Rig's scan group
 
-	for (port = 1; port < 33; port++)
+	for (port = 1; port < MAXBPQPORTS; port++)
 	{
 		TNC = TNCInfo[port];
 
@@ -7359,7 +7367,7 @@ VOID SetupPortRIGPointers()
 	struct TNCINFO * TNC;
 	int port;
 
-	for (port = 1; port < 33; port++)
+	for (port = 1; port < MAXBPQPORTS; port++)
 	{
 		TNC = TNCInfo[port];
 

UIARQ.c

@@ -634,6 +634,8 @@ static VOID SendPacket(struct TNCINFO * TNC, struct STREAMINFO * STREAM, UCHAR *
 	Block.PID = 0xF0;
 
 	ConvToAX25(STREAM->RemoteCall, Block.DEST);
+	Block.DEST[6] |= 0x80;			// set Command Bit
+
 	memcpy(Block.ORIGIN, MYCALL, 7);
 
 	Block.L2DATA[0] = STREAM->ARQInfo->FarStream;

UZ7HODrv.c

@@ -86,6 +86,9 @@ static char ClassName[]="ARDOPSTATUS";
 static char WindowTitle[] = "UZ7HO";
 static int RigControlRow = 165;
 
+char FX25Modes[8][8] = {"None", "RxOnly", "RX+TX"};
+char IL2PModes[8][10] = {"None", "RxOnly", "RX+TX", "il2pOnly"};
+
 
 //LOGFONT LFTTYFONT ;
 
@@ -378,7 +381,7 @@ int UZ7HOSetFreq(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMESS
 		return 1;
 	}
 
-	if (TNCInfo[MasterPort[port]]->AGWInfo->isQTSM == 3)
+	if (TNCInfo[MasterPort[port]]->AGWInfo->isQTSM >= 3)
 	{
 		// QtSM so can send Set Freq Command
 
@@ -437,7 +440,7 @@ int UZ7HOSetModem(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMES
 
 		return 1;
 	}
-	else if (TNCInfo[MasterPort[port]]->AGWInfo->isQTSM == 3)
+	else if (TNCInfo[MasterPort[port]]->AGWInfo->isQTSM >= 3)
 	{
 		// Can send modem name to QTSM
 
@@ -452,6 +455,8 @@ int UZ7HOSetModem(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMES
 
 		strcpy(&Buffer[4], &buff->L2DATA[6]);
 
+		Buffer[27] = 1;					// Modem can set modem flags
+
 		AGW->TXHeader.Port = UZ7HOChannel[port];
 		AGW->TXHeader.DataKind = 'g';
 		memset(AGW->TXHeader.callfrom, 0, 10);
@@ -496,6 +501,119 @@ int UZ7HOSetModem(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMES
 	return 1;
 }
 
+int UZ7HOSetFlags(int port, struct TNCINFO * TNC, struct AGWINFO * AGW, PDATAMESSAGE buff, PMSGWITHLEN buffptr)
+{
+	int txlen = GetLengthfromBuffer(buff) - (MSGHDDRLEN + 1);
+	char Buffer[32] = "";
+	int MsgLen = 32;
+	char * ptr, * context;
+	int i;
+
+	if (TNCInfo[MasterPort[port]]->AGWInfo->isQTSM != 7)
+	{
+		buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Sorry Setting UZ7HO flags not supported on this modem\r");
+		return 1;
+	}
+	
+	// May be read or set flags
+
+	if (txlen == 6)
+	{
+		// Read Flags
+
+		buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} fx25 %s il2p %s %s\r",
+			FX25Modes[TNC->AGWInfo->fx25Flags], IL2PModes[TNC->AGWInfo->il2pFlags], TNC->AGWInfo->il2pcrc?"CRC":"");
+
+		return 1;
+	}
+
+	ptr = strtok_s(&buff->L2DATA[6], " ,\r", &context);
+
+	while (ptr && ptr[0])
+	{
+		if (_stricmp(ptr, "fx25") == 0)
+		{
+			ptr = strtok_s(NULL, " ,\r", &context);
+			i = 4;
+
+			if (ptr && ptr[0])
+			{
+				for (i = 0; i < 4; i++)
+				{
+					if (_stricmp(FX25Modes[i], ptr) == 0)
+					{
+						TNC->AGWInfo->fx25Flags = i;
+						break;
+					}
+				}
+			}
+
+			if (i == 4)
+			{
+				buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Failed - fx25 flags invalid\r");
+				return 1;
+			}
+		}
+		else if (_stricmp(ptr, "il2p") == 0)
+		{
+			ptr = strtok_s(NULL, " ,\r", &context);
+			i = 4;
+
+			if (ptr && ptr[0])
+			{
+				for (i = 0; i < 4; i++)
+				{
+					if (_stricmp(IL2PModes[i], ptr) == 0)
+					{
+						TNC->AGWInfo->il2pFlags = i;
+						break;
+					}
+				}
+			}
+
+			if (i == 4)
+			{
+				buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Failed - il2p flags invalid\r");
+				return 1;
+
+			}
+		}
+		else if (_stricmp(ptr, "crc") == 0)
+			TNC->AGWInfo->il2pcrc = 1;
+		else if (_stricmp(ptr, "nocrc") == 0)
+			TNC->AGWInfo->il2pcrc = 0;
+		else
+		{
+			buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Failed - invalid flag %s\r", ptr);
+			return 1;
+		}
+
+		ptr = strtok_s(NULL, " ,\r", &context);
+	}
+
+
+	Buffer[27] = 2;				// Set Flags
+
+	Buffer[28] = TNC->AGWInfo->fx25Flags;
+	Buffer[29] = TNC->AGWInfo->il2pFlags;
+	Buffer[30] = TNC->AGWInfo->il2pcrc;
+
+	AGW->TXHeader.Port = UZ7HOChannel[port];
+	AGW->TXHeader.DataKind = 'g';
+	memset(AGW->TXHeader.callfrom, 0, 10);
+	memset(AGW->TXHeader.callto, 0, 10);
+#ifdef __BIG_ENDIAN__
+	AGW->TXHeader.DataLength = reverse(MsgLen);
+#else
+	AGW->TXHeader.DataLength = MsgLen;
+#endif
+	send(TNCInfo[MasterPort[port]]->TCPSock, (char *)&AGW->TXHeader, AGWHDDRLEN, 0);
+	send(TNCInfo[MasterPort[port]]->TCPSock, Buffer, MsgLen, 0);
+	
+	buffptr->Len = sprintf((UCHAR *)&buffptr->Data[0], "UZ7HO} Set Modem Flags command sent Ok\r");
+	return 1;
+}
+
 
 static size_t ExtProc(int fn, int port, PDATAMESSAGE buff)
 {
@@ -977,6 +1095,18 @@ static size_t ExtProc(int fn, int port, PDATAMESSAGE buff)
 				}
 				return 1;
 			}
+			if (_memicmp(&buff->L2DATA[0], "FLAGS", 5) == 0)
+			{
+				PMSGWITHLEN buffptr = (PMSGWITHLEN)GetBuff();
+				if (buffptr)
+				{
+					UZ7HOSetFlags(port, TNC, AGW, buff, buffptr);
+					C_Q_ADD(&STREAM->PACTORtoBPQ_Q, buffptr);
+				}
+				return 1;
+			}
+
+
 			// See if a Connect Command.
 
 			if (toupper(buff->L2DATA[0]) == 'C' && buff->L2DATA[1] == ' ' && txlen > 2)	// Connect
@@ -1311,7 +1441,7 @@ void * UZ7HOExtInit(EXTPORTDATA * PortEntry)
 
 #ifndef LINBPQ
 
-	CreatePactorWindow(TNC, ClassName, WindowTitle, RigControlRow, PacWndProc, 500, 450, ForcedClose);
+	CreatePactorWindow(TNC, ClassName, WindowTitle, RigControlRow, PacWndProc, 520, 450, ForcedClose);
 
 	CreateWindowEx(0, "STATIC", "Comms State", WS_CHILD | WS_VISIBLE, 10,6,120,20, TNC->hDlg, NULL, hInstance, NULL);
 	TNC->xIDC_COMMSSTATE = CreateWindowEx(0, "STATIC", "", WS_CHILD | WS_VISIBLE, 120,6,386,20, TNC->hDlg, NULL, hInstance, NULL);
@@ -1327,7 +1457,7 @@ void * UZ7HOExtInit(EXTPORTDATA * PortEntry)
 			0,170,250,300, TNC->hDlg, NULL, hInstance, NULL);
 
 	TNC->ClientHeight = 450;
-	TNC->ClientWidth = 500;
+	TNC->ClientWidth = 520;
 
 	TNC->hMenu = CreatePopupMenu();
 	
@@ -2615,7 +2745,7 @@ GotStream:
 			if (RXHeader->DataLength == 12)
 			{
 				// First reply - request Modem Freq and Name
-				for (p = This; p < 33; p++)
+				for (p = This; p < MAXBPQPORTS; p++)
 				{
 					if (MasterPort[p] == This)
 					{
@@ -2627,6 +2757,7 @@ GotStream:
 							int MsgLen = 32;
 							SOCKET sock = TNCInfo[MasterPort[This]]->TCPSock;
 
+							Buffer[27] = 1;					// Modem can set modem flags
 
 							TNC->AGWInfo->isQTSM |= 2;
 
@@ -2647,7 +2778,7 @@ GotStream:
 				return;
 			}
 
-			if (RXHeader->DataLength == 44)
+			if (RXHeader->DataLength == 44 || RXHeader->DataLength == 48)
 			{
 				// Modem Freq and Type Report from QtSM
 
@@ -2662,7 +2793,21 @@ GotStream:
 				memcpy(&TNC->AGWInfo->ModemName, &Message[16], 20);
 				memcpy(&TNC->AGWInfo->Version, &Message[38], 4);
 
-				sprintf(TNC->WEB_MODE, "%s / %d Hz", TNC->AGWInfo->ModemName, TNC->AGWInfo->CenterFreq);
+				if (RXHeader->DataLength == 48)
+				{
+					// includes modem flags
+
+					TNC->AGWInfo->isQTSM |= 4;			// can send flags
+					TNC->AGWInfo->fx25Flags = (Message[45] & 3);
+					TNC->AGWInfo->il2pFlags = (Message[46] & 3);
+					TNC->AGWInfo->il2pcrc = Message[47];
+			
+					sprintf(TNC->WEB_MODE, "%s/%d Hz FX %s IL2P %s %s", TNC->AGWInfo->ModemName, TNC->AGWInfo->CenterFreq,
+						FX25Modes[TNC->AGWInfo->fx25Flags], IL2PModes[TNC->AGWInfo->il2pFlags], TNC->AGWInfo->il2pcrc?"CRC":"");
+				}
+				else
+					sprintf(TNC->WEB_MODE, "%s/%d Hz ", TNC->AGWInfo->ModemName, TNC->AGWInfo->CenterFreq);
+
 				SetWindowText(TNC->xIDC_MODE, TNC->WEB_MODE);
 			}
 		}

VARA.c

@@ -2413,6 +2413,7 @@ VOID VARAProcessReceivedData(struct TNCINFO * TNC)
 							Msg->PID = 0xcf;
 							Msg->PORT = TNC->Port | 0x80;
 							Msg->CTL = 3;
+							Msg->DEST[6] |= 0x80;			// set Command Bit
 							Msg->ORIGIN[6] |= 1;		// set end of address
 							time(&Msg->Timestamp);
 							BPQTRACE(Msg, FALSE);
@@ -2445,6 +2446,8 @@ VOID VARAProcessReceivedData(struct TNCINFO * TNC)
 							ConvToAX25(TNC->NRNeighbour, Buffer->DEST);
 							memcpy(Buffer->ORIGIN, NETROMCALL, 7);
 							Buffer->ORIGIN[6] |= 1;		// set end of address
+							Buffer->DEST[6] |= 0x80;			// set Command Bit
+
 							time(&Buffer->Timestamp);
 							BPQTRACE(Buffer, FALSE);				// TRACE
 							NETROMMSG(TNC->DummyLink, L3MSG);
@@ -2886,6 +2889,8 @@ void SendVARANetromMsg(struct TNCINFO * TNC, L3MESSAGEBUFFER * MSG)
 	ConvToAX25(TNC->NRNeighbour, Buffer->DEST);
 	memcpy(Buffer->ORIGIN, NETROMCALL, 7);
 	Buffer->ORIGIN[6] |= 1;		// set end of address
+	Buffer->DEST[6] |= 0x80;			// set Command Bit
+
 
 	time(&Buffer->Timestamp);
 	

Versions.h

@@ -10,8 +10,8 @@
 
 #endif
 
-#define KVers 6,0,24,15
-#define KVerstring "6.0.24.15\0"
+#define KVers 6,0,24,16
+#define KVerstring "6.0.24.16\0"
 
 #ifdef CKernel
 

WebMail.c

@@ -1193,6 +1193,10 @@ int ViewWebMailMessage(struct HTTPConnectionInfo * Session, char * Reply, int Nu
 						}
 					}
 				}
+
+				if (DisplayHTML && stristr(Message, "</html>"))
+					DisplayStyle = "div";				// Use div so HTML and XML are interpreted
+
 				return sprintf(Reply, WebMailMsgTemplate, BBSName, User->Call, Msg->number, Msg->number, Key, Msg->number, Key, DownLoad, Key, Key, Key, DisplayStyle, Message, DisplayStyle);
 			}
 
@@ -1232,9 +1236,7 @@ int ViewWebMailMessage(struct HTTPConnectionInfo * Session, char * Reply, int Nu
 			size_t origlen = msgLen + 1;
 
 			UCHAR * BufferB = malloc(2 * origlen);
-
 #ifdef WIN32
-
 			WCHAR * BufferW = malloc(2 * origlen);
 			int wlen;
 			int len = (int)origlen;
@@ -1246,10 +1248,10 @@ int ViewWebMailMessage(struct HTTPConnectionInfo * Session, char * Reply, int Nu
 			Save = MsgBytes = BufferB;
 			free(BufferW);
 			msgLen = len - 1;		// exclude NULL
-
 #else
 			size_t left = 2 * msgLen;
-			size_t len = msgLen;
+			size_t outbuflen = left;
+			size_t len = msgLen + 1;		// include null
 			int ret;
 			UCHAR * BufferBP = BufferB;
 			char * orig = MsgBytes;
@@ -1270,15 +1272,18 @@ int ViewWebMailMessage(struct HTTPConnectionInfo * Session, char * Reply, int Nu
 				iconv(icu, NULL, NULL, NULL, NULL);		// Reset State Machine
 				ret = iconv(icu, &MsgBytes, &len, (char ** __restrict__)&BufferBP, &left);
 			}
+
+			// left is next location to write, so length written is outbuflen - left
+			// add a null in case iconv didn't complete comversion
+
+			BufferB[outbuflen - left] = 0;
+
 			free(Save);
 			Save = MsgBytes = BufferB;
 			msgLen = strlen(MsgBytes);
-
 #endif
-
 		}
 
-
 		//		ptr += sprintf(ptr, "%s", MsgBytes);
 
 		memcpy(ptr, MsgBytes, msgLen);
@@ -1307,13 +1312,10 @@ int ViewWebMailMessage(struct HTTPConnectionInfo * Session, char * Reply, int Nu
 		ptr += sprintf(ptr, "File for Message %d not found\r", Number);
 	}
 
-	if (DisplayHTML && stristr(Message, "html>"))
+	if (DisplayHTML && stristr(Message, "</html>"))
 		DisplayStyle = "div";				// Use div so HTML and XML are interpreted
 
 
-
-
-
 	return sprintf(Reply, WebMailMsgTemplate, BBSName, User->Call, Msg->number, Msg->number, Key, Msg->number, Key, DownLoad, Key, Key, Key, DisplayStyle, Message, DisplayStyle);
 }
 

WinRPRHelper.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments="COM53 127.0.0.1:4532"
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor="0"
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments="COM53 127.0.0.1:4532"
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor="0"
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

WinmorControl.vcproj.DESKTOP-TGEL8RC.John.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="DESKTOP-TGEL8RC"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

WinmorControl.vcproj.SKIGACER.johnw.user

@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="Windows-1252"?>
-<VisualStudioUserFile
-	ProjectType="Visual C++"
-	Version="8.00"
-	ShowAllFiles="false"
-	>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			>
-			<DebugSettings
-				Command="$(TargetPath)"
-				WorkingDirectory=""
-				CommandArguments=""
-				Attach="false"
-				DebuggerType="3"
-				Remote="1"
-				RemoteMachine="SKIGACER"
-				RemoteCommand=""
-				HttpUrl=""
-				PDBPath=""
-				SQLDebugging=""
-				Environment=""
-				EnvironmentMerge="true"
-				DebuggerFlavor=""
-				MPIRunCommand=""
-				MPIRunArguments=""
-				MPIRunWorkingDirectory=""
-				ApplicationCommand=""
-				ApplicationArguments=""
-				ShimCommand=""
-				MPIAcceptMode=""
-				MPIAcceptFilter=""
-			/>
-		</Configuration>
-	</Configurations>
-</VisualStudioUserFile>

adif-HPLaptop.h

@@ -1,36 +0,0 @@
-// ADIF Logging Bits
-
-typedef struct ADIF
-{
-	char Call[16];
-	time_t StartTime;
-	int Mode;
-	char LOC[7];
-	char Band[8];			// ?Derive from freq?
-	int Freq;
-
-	// Extra fields for Trimode comment fields
-
-	char CMSCall[16];
-	char ServerSID[80];
-	char UserSID[80];
-	char ReportMode[16];
-	char Termination[8];		// Last "F" message from CMS
-	int Sent;
-	int Received;
-	int BytesSent;
-	int BytesReceived;
-
-	char Dirn;					// Direction of current transfer (In/Out)
-
-	int FBBIndex;				// For saving proposals
-	int FBBLen[5];				// Proposed messages
-	BOOL GotFC;					// Flag for acking messages on first FC
-	char PartMessage[256];		// Some modes frame size too small for complete lines
-
-} ADIF;
-
-BOOL UpdateADIFRecord(ADIF * ADIF, char * Msg, char Dirn);
-BOOL WriteADIFRecord(ADIF * ADIF);
-
-

tncinfo.h

@@ -282,6 +282,9 @@ typedef struct AGWINFO
 	int Modem;					// Modem number in list 
 	char ModemName[20];	
 	unsigned char Version[4];
+	unsigned char fx25Flags;
+	unsigned char il2pFlags;
+	unsigned char il2pcrc;
 
 } *PAGWINFO;