You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
34 lines
2.1 KiB
34 lines
2.1 KiB
g2_ircddb
|
|
=========
|
|
|
|
This package is for making a ircddb gateway based on Scott Lawson KI4LKF g2_ircddb gateway software.
|
|
|
|
tworepeater devices are supported so far: the DVAP dongle (see http://www.dvapdongle.com) and the dvrptr (see http://www.dvrptr.net).
|
|
|
|
Creating a portable DVAP hotspot based on a Raspberry Pi or a BeagleBone Black that can connect to both DStar reflectors as well as XREF reflectors based on Scott Lawson KI4LKF software is easy.
|
|
|
|
As configured, this software requires a Debian or Debian-based Linux OS and is specifically designed for a Raspberry Pi (http://raspberrypi.org) on Raspbian Liunx or a BeagleBone Black (http://beagleboard.org) running Debian Linux. Depending on your knowledge with your choice of OS, you can probably get this to work on others as well. The closer you are to a Debian base, the easier it will be.
|
|
|
|
Start with a Raspberry Pi with the latest Raspbian image (see http://raspberrypi.org) or a BeagleBone Black with the latest Debian image (see http://www.armhf.com). Scott's software will EASILY fit on the on-board memory of the BBB, but you will still need a uSD card to install the armhf.com Debian image to the on-board memory. If you are using Raspbian on a RasPi, be sure to configure Raspbian with the "sudo raspi-config" command. If you are using Debian on a BBB, be sure to look over the notes on expanding the uSD memory on the www.armhf.com website.
|
|
|
|
|
|
You will need several packages to build Scott's gateway. The RasPi will probably have all or most of these but it still doesn't hurt to be sure:
|
|
|
|
sudo su
|
|
|
|
apt-get update
|
|
|
|
apt-get upgrade
|
|
|
|
apt-get install make g++ unzip git
|
|
|
|
and maybe a few more of your favorite packages. Here is one of my favorites: "apt-get install avahi-daemon". Then you can "ssh user@hostname.local" instead of "ssh user@ip_address.
|
|
|
|
After you install all the required packages, the g2_ircddb gateway installation can begin. Go to your login home directory and (without root privileges) type:
|
|
|
|
git clone git://github.com/ac2ie/g2_ircddb.git
|
|
|
|
Then cd into the new g2_ircddb directory and review the BUILDING and CONFIGURING file for further instructions.
|
|
|
|
Tom Early, ac2ie@arrl.net
|