tweaks

qn.dvap.cfg

@@ -1,6 +1,6 @@
 # A Simple Configuration for a 2M DVAP
 
-ircddb_login='Q0ABC'
+ircddb_login='Q1ABC'
 
 module_c='dvap'                    # change to 'module_b' if you have a 70cm dvap
 module_c_serial_number='AP123456'  # your serial number is visible through the case

qn.itap.cfg

@@ -1,6 +1,6 @@
 # A Simple Configuration File for an ICOM using Terminal and Access Point Mode
 
-ircddb_login='Q0Q0ABC'
+ircddb_login='Q1ABC'
 
 module_c='itap'
 

qn.mmdvm.cfg

@@ -3,12 +3,13 @@
 # Please see qn.everything.cfg for many configurable items.
 # New-bees beware, it is possible to configure your system
 # to a non-functional state. Nearly all configure items
-# already have good default vaules, but the two below
+# already have good default values, but the two below
 # HAVE TO BE SET BY YOU!!!
 
-ircddb_login='Q0ABC'
+ircddb_login='Q1ABC'
 
 module_x='mmdvm'
+
 # Change the "x" to the lowercase equivilent of the module assignment in you MMDVM.qn initialization file.
 # Use B in the .ini file and b in this file for 70cm and C and c for 2M. See the qn.everything.cfg file if you want to include
 # location data for your repeater/hot-spot. (Location data in your MMDVM.qn ini file will