Tom Early
7 years ago
parent
0053338b24
commit
606b342921
@ -1,44 +1,9 @@
|
||||
# g2_ircddb Configuration for me
|
||||
# A Simple Configuration for a 2M DVAP
|
||||
|
||||
ircddb = {
|
||||
login = "XX0XXX"
|
||||
# If you are not using rr.openquad.net, you need to specify the host and possibly the password.
|
||||
#
|
||||
# host = "some.server.host" // others include group1-irc.ircddb.net
|
||||
# password = "1111111111111" // not needed for rr.openquad.net
|
||||
}
|
||||
ircddb_login='Q0ABC'
|
||||
|
||||
module = {
|
||||
c = { // change the module to "b" if you have a 70cm DVAP
|
||||
type = "dvap"
|
||||
serial_number = "AP123456" // your serial number is visible through the case
|
||||
frequency = 145.5 // this is the default value, chose a quiet frequency
|
||||
# uncomment and set if you want the following to appear on you ircddb host website.
|
||||
# range = 0.0 // in meters (1609.344 is one mile)
|
||||
# agl = 0.0 // in meters
|
||||
# latitude = 0.000000 // north is positive
|
||||
# longitude = 0.000000 // east is positive
|
||||
# desc1 = "Location1" // up to 20 chars
|
||||
# desc2 = "location2" // up to 20 chars
|
||||
}
|
||||
}
|
||||
module_c='dvap' # change to 'module_b' if you have a 70cm dvap
|
||||
module_c_serial_number='AP123456' # your serial number is visible through the case
|
||||
module_c_frequency=146.5 # in MHz, chose a quiet frequency
|
||||
|
||||
link = {
|
||||
# add the callsigns that can shutdown or reboot your system
|
||||
# admin = [ "XX0XXX" , "YY0YYY" ] // only these users can execute scripts
|
||||
|
||||
# link to the reflector of your choice. the first character is the module you are linking.
|
||||
# link_at_start = "CREF001C"
|
||||
}
|
||||
|
||||
dplus = {
|
||||
# The following settings do not affect your ability to use dplus linking to XRF or XLX reflectors!
|
||||
# You must be registered on the DPlus system, see www.dstargateway.org, otherwise authorization will fail,
|
||||
# even if QnetLink reports a successful authorization.
|
||||
|
||||
# authorize = false # uncomment and set to true if you want to use the closed-source DPlus reflectors and/or repeaters
|
||||
# use_reflectors = true # uncomment and set to false if you are not going to link to DPlus reflectors
|
||||
# use_repeaters = true # uncomment and set to false if you are not going to link to DPlus repeaters
|
||||
|
||||
# any values specified in you gwys.txt file will override any reflectors or repeaters that DPlus authorization returns.
|
||||
}
|
||||
#dplus_authorize=true # uncomment if you want to link to the legacy D-Plus system
|
||||
|
||||
@ -1,301 +1,239 @@
|
||||
# Qnet Gateway Configuration
|
||||
|
||||
ircddb = {
|
||||
login = "CHANGEME!!!!"; # login callsign for the ircDDB network
|
||||
# host = "rr.openquad.net" # other include group1-irc.ircddb.net
|
||||
# port = 9007 # not a good idea to change!
|
||||
# password = "1111111111111" # not needed for rr.openquad.net
|
||||
}
|
||||
|
||||
gateway = {
|
||||
# regen_header = true # regenerate headers from incoming data
|
||||
# send_qrgs_maps = true # send frequecy, offset, cooridinates and url to irc-server
|
||||
# aprs_send = true # send info to aprs
|
||||
|
||||
external = {
|
||||
# ip = "0.0.0.0"
|
||||
# port = 40000
|
||||
}
|
||||
}
|
||||
|
||||
module = {
|
||||
a = { # An MMDVMHost module is shown
|
||||
# make sure this module letter agrees with the [D-Star] Module letter in MMDVM.ini
|
||||
# in MMDVM.ini its uppercase, here use lower case.
|
||||
# We show a here, but the convention on this software is:
|
||||
# 23 cm modules will use "a"
|
||||
# 70 cm modules will use "b"
|
||||
# 2 M module will use "c"
|
||||
type = "mmdvm"
|
||||
# frequency = 0 # if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
||||
# offset = 0
|
||||
# range = 0 # the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
# agl = 0 # the height above ground level for this repeater's antenna
|
||||
# latitude = 0 # you can leave this unspecified for a mobile rig
|
||||
# longitude = 0 # like the latitude
|
||||
# desc1 = "" # maximum of 20 characters, most special symbols are not allowed
|
||||
# desc2 = "" # just like desc1
|
||||
# url = "github.com/n7tae/g2_ircddb" # 80 characters max
|
||||
# In review, for an MMDVM module, you only need to specify the type = "mmdvm" and
|
||||
# make sure the module letter agrees with what's in "MMDVM.ini.
|
||||
# Also see the mmdvm section below, although it usually doesn't need specifying.
|
||||
}
|
||||
|
||||
b = {
|
||||
# a DVRPTR connected to a 70cm radio is shown in this example
|
||||
|
||||
# type must be defined. This is how the dvrptr program finds the config params.
|
||||
type = "dvrptr"
|
||||
|
||||
# If you operate in "restriction mode", set callsign equal to your personal callsign
|
||||
# Otherwise do not set callsign and we will use ircddb.username
|
||||
# callsign = ""
|
||||
|
||||
# the frequency of your DVRPTR in MHz.
|
||||
# frequency = 145.5
|
||||
|
||||
# the TX/RX offset in MHz, use 0.0 for simplex
|
||||
# offset = 0
|
||||
|
||||
# the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
# range = 0.0
|
||||
|
||||
# the height above ground level for you repeater's antenna
|
||||
# agl = 0.0
|
||||
|
||||
# the latitude of your repeater
|
||||
# latitude = 0.0
|
||||
|
||||
# the longitude of your repeater
|
||||
# longitude = 0.0
|
||||
|
||||
# This is used in a loop to wait for packets from your local gateway
|
||||
# This is in milliseconds
|
||||
# packet_wait = 25
|
||||
|
||||
# description of repeater, part one and two 20 char max each
|
||||
# desc1 = ""
|
||||
# desc2 = ""
|
||||
|
||||
# the url of your repeater, 80 chars max, defaults to "github.com/n7tae/g2_ircddb"
|
||||
# url = ""
|
||||
|
||||
# If you want to enable/disable the repeater, set these options.
|
||||
# Each of these options can NOT be more than 8 characters.
|
||||
# Each of these options can NOT be another user's callsign.
|
||||
# Each of these options can NOT be another repeater or reflector.
|
||||
# Each of these options can NOT be a YRCALL command.
|
||||
# If these options are set, then they can NOT be equal to each other.
|
||||
# Using the above options, if you use YRCALL=RFISOFF in your radio
|
||||
# then the repeater will be OFF and no audio will be copied over local RF
|
||||
# and no audio will be accepted from any remote system.
|
||||
# these command are disabled by default
|
||||
# You can choose your own command strings, if you want to enable these
|
||||
rf_control = {
|
||||
# on = "RFISON"
|
||||
# off = "RFISOFF"
|
||||
}
|
||||
|
||||
# To protect the repeater owners from bad STN programs out there
|
||||
# and to also protect the repeater owners from RF users that abuse the STN stuff
|
||||
# Reject values in YRCALL that start with STN
|
||||
# If you want to allow the local RF users to subscribe to remote STN groups,
|
||||
# then set it to XXX or something that is invalid like 123
|
||||
# invalid_prefix = "XXX"
|
||||
|
||||
# Your DVRPTR V1 serial number
|
||||
# If you don't know what it is, run the program and look in the log file!
|
||||
# serial_number = "00.00.00.00"
|
||||
|
||||
# Some settings for your DVRPTR modem (see DVRPTR V1 manual for more info).
|
||||
# rf_rx_level = 80
|
||||
|
||||
# If you need duplex, set it to true
|
||||
# duplex = false
|
||||
|
||||
# Do you want an ACK back ?
|
||||
# acknowledge = false
|
||||
|
||||
# ACK delay in milliseconds(ms)
|
||||
# Minimum is 1, maximum is 999
|
||||
# If you do not get a repeater ACK, then make it a higher number
|
||||
# Some radios get the ACK in 250ms, other radios require 750ms
|
||||
# ack_delay = 300
|
||||
|
||||
# This is the TX-delay in milliseconds and it is used to delay the PTT.
|
||||
# Seme radios have "SLOW" switching time,
|
||||
# If your radio switches slow from RX to TX, then give your radio more time to switch, maybe 250 ms
|
||||
# If your radio switches fast from RX to TX, then you could set it to 100 ms or maybe less
|
||||
# But the best value should be the one to match your radio, so read the manual for your radio.
|
||||
# In tests that were done for SLOW and FAST radios, we set it to 100 for FAST radios and 250 for SLOW radios.
|
||||
# tx_delay = 250
|
||||
|
||||
# Dead firmware ?
|
||||
# Lets say that you set RQST_COUNT=10
|
||||
# When there is NO local RF activity, (we do NOT receive anything from the DV-RPTR modem),
|
||||
# then every 2 seconds we request the status from the DV-RPTR modem.
|
||||
# If the DV-RPTR modem does NOT reply to our command, then after sending the command 10 times(RQST_COUNT)
|
||||
# we have to assume the firmware in the DV-RPTR modem is DEAD.
|
||||
# So, we send the command every 2 sedonds, and after sending the command 10 times,
|
||||
# that is about (2 * 10) = 20 seconds,
|
||||
# the repeater software will stop if the DV-RPTR modem does not respond after 20 seconds( 2 seconds * 10 times )
|
||||
# and then the service script will restart the repeater software.
|
||||
# This is used to protect the repeater owner from BAD firmware.
|
||||
# Minimum value is 6.
|
||||
# If you see in the log this: "Modem is not responding... shuttting down"
|
||||
# Then that means that the firmware died and the DV-RPTR modem stopped responding.
|
||||
# You can increase the value of RQST_COUNT if you have a slow computer,
|
||||
# (or maybe your computer is running too many programs and can not service the USB/serial fast enough)
|
||||
# but we were informed that this is a bug in the firmware and they are trying to fix it.
|
||||
# So, increasing the value for RQST_COUNT to higher than 10, does not make much sense.
|
||||
# rqst_count = 10
|
||||
|
||||
# These values depend on what type of tranceiver is connected to your DV-RPTR modem
|
||||
# Use either true or false
|
||||
inverse = {
|
||||
# rx = true
|
||||
# tx = true
|
||||
}
|
||||
}
|
||||
|
||||
c = {
|
||||
# a 2m DVAP is shown as an example
|
||||
|
||||
# type must be defined. This is how the dvap_rptr program finds the config params.
|
||||
type = "dvap"
|
||||
|
||||
# If you operate in "restriction mode", set RPTR equal to your personal callsign
|
||||
# Otherwise do not set callsign and it will use ircddb.username
|
||||
# callsign = ""
|
||||
|
||||
# TX DVAP power level -12 to 10, 10 is maximum poower
|
||||
# power = 10
|
||||
|
||||
# Squelch, -128 to -45, -100 to -80 usually works best
|
||||
# squelch = -100
|
||||
|
||||
# To protect the repeater owners from bad STN programs out there
|
||||
# and to also protect the repeater owners from RF users that abuse the STN stuff
|
||||
# Reject values in YRCALL that start with STN
|
||||
# If you want to allow the local RF users to subscribe to remote STN groups,
|
||||
# then set it to XXX or something that is invalid like 123
|
||||
# ivalid_prefix = "XXX"
|
||||
|
||||
# The serial number of you DVAP is visible through the bottom of the case
|
||||
# serial_number = "APXXXXXX"
|
||||
|
||||
# the DVAP will send a blip to acknowledge a transmission
|
||||
# acknowledge = false
|
||||
|
||||
# the frequency of your DVAP in MHz.
|
||||
# frequency = 145.5
|
||||
|
||||
# this is for tweaking the frequency of your DVAP, see the owner's manual
|
||||
# dvap_offset = 0
|
||||
|
||||
# the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
# range = 0.0
|
||||
|
||||
# the height above ground level for you repeater's antenna
|
||||
# agl = 0.0
|
||||
|
||||
# the latitude of your repeater
|
||||
# latitude = 0.0
|
||||
|
||||
# the longitude of your repeater
|
||||
# longitude = 0.0
|
||||
|
||||
# This is used in a loop to wait for packets from your local gateway
|
||||
# This is in milliseconds
|
||||
# packet_wait = 25
|
||||
|
||||
# description of repeater, part one and two 20 char max each
|
||||
# desc1 = ""
|
||||
# desc2 = ""
|
||||
|
||||
# the url of your repeater, 80 chars max
|
||||
# url = "github.com/n7tae/QnetGateway"
|
||||
}
|
||||
}
|
||||
|
||||
# you only need this mmdvm section if you set non-standard D-Star ports on your MMDVMHost software
|
||||
mmdvm = {
|
||||
# these need to be the same as they are in your MMDVM.ini file (in the [D-Star Network] section
|
||||
# If you change them there, then change them here!
|
||||
# internal_ip = "0.0.0.0"
|
||||
# gateway_port = 20010
|
||||
# local_port = 20011
|
||||
}
|
||||
|
||||
log = {
|
||||
# debuging and extra logging switches
|
||||
# qso = false # QSO info goes into the log
|
||||
# irc = false # IRC debug info
|
||||
# dtmf = false # DTMF debug info
|
||||
}
|
||||
|
||||
aprs = { # APRS.NET connect info
|
||||
# host = "rotate.aprs.net"
|
||||
# port = 14580
|
||||
# interval = 40
|
||||
# filter = ""
|
||||
}
|
||||
|
||||
link = {
|
||||
# link_at_start = "NONE" # Link to a reflector at startup.
|
||||
# to link repeater module B to REF001 C, use "BREF001C"
|
||||
# ref_login = "" # for loging into REF reflectors, if undefined, ircddb.username will be used
|
||||
# admin = [ "CALL1", "CALL2", "CALL3" ] # only these users can execute scripts, block dongles and reload the gwys.txt
|
||||
# you probably want you own callsign in the admin list!
|
||||
# link_unlink = [ "CALL4", "CALL5", "CALL6" ] # if defined, only these users can link and unlink a repeater
|
||||
# no_link_unlink = [ "CALL7", "CALL8", "CALL9" ] # if defined, these users cannot link or unlink, it's a blacklist
|
||||
# if the blacklist is defined (even if it's empty), the link_unlink will not be read
|
||||
# incoming_ip = "0.0.0.0" # incoming ip address, "0.0.0.0" means accepts all connections.
|
||||
# ref_port = 20001 # port for REF linking, don't change
|
||||
# xrf_port = 30001 # port for XRF linking, don't change
|
||||
# dcs_port = 30051 # port for DCS linking, don't change
|
||||
# announce = true # do link, unlink, etc. announcements
|
||||
# acknowledge = true # send text acknowledgment on key-up
|
||||
# max_dongles = 5 # maximum number of linked hot-spots
|
||||
}
|
||||
|
||||
dplus = {
|
||||
#
|
||||
# Copyright (c) 2019 by Thomas A. Early N7TAE
|
||||
#
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation, either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
#########################################################################################################################
|
||||
# #
|
||||
# qn.everything.cfg example configuration file #
|
||||
# #
|
||||
#########################################################################################################################
|
||||
# What follows need to also be valid bash shell variable definitions, therefore:
|
||||
# No white space on either side of the equal sign (=)
|
||||
# String values should be quoted if they contain any special chars, including white space
|
||||
# If a string value is a simple word, it doesn't need to be quoted
|
||||
# Use the single quote (') for quoting strings, not the double quote(")
|
||||
# Comments can come after a key=value definition, introduced by a pound-sign (#)
|
||||
#
|
||||
# if a definition is commented out, it means that key has that value as its default value.
|
||||
# You don't need to uncomment it if that value is acceptable. In fact, you can remove the commented
|
||||
# line altogether to simplify you qn.cfg file! In fact, you can remove all these comments and blank
|
||||
# lines!
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# IRCDDB - You MUST use a legal callsign for logging into any IRC network
|
||||
#
|
||||
# you must specify you legal Callsign to enable QnetGateway
|
||||
ircddb_login='' # login callsign for the ircDDB network
|
||||
#ircddb_host='rr.openquad.net' # other irc networks include group1-irc.ircddb.net and group2-irc.ircddb.net
|
||||
#ircddb_port=9007 # not a good idea to change!
|
||||
#ircddb_password='1111111111111' # not needed for rr.openquad.net
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# GATEWAY
|
||||
#
|
||||
# Very few users will need to specify anything in the 'gateway' section!
|
||||
#gateway_bool_regen_header=true # regenerate headers from incoming data
|
||||
#gateway_send_qrgs_maps=true # send frequency, offset, coordinates and url to irc-server
|
||||
#gateway_local_irc_ip='0.0.0.0' # the local port on the gateway for the IRC tcp socket
|
||||
#gateway_external_ip='0.0.0.0' # this means accept a connection from any source
|
||||
#gateway_external_port=40000 # don't change
|
||||
#gateway_tolink='gate2link' # Unix sockets between qngateway and QnetLink
|
||||
#gateway_fromlink='link2gate' # all Unix sockets are on the file system, but hidden from view
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# APRS - for tracking users and also this repeater.
|
||||
#
|
||||
#aprs_enable=true # uncomment and set this to 'false' if you don't wany the gateway interacting with APRS
|
||||
#aprs_host='rotate.aprs.net' # the APRS network server
|
||||
#aprs_port=14580 # and port
|
||||
#aprs_interval=40 # keep-alive in minutes
|
||||
#aprs_filter='' # advanced feature
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# LINK - controls the behaviour of QnetLink (qnlink)
|
||||
#
|
||||
#link_admin='' # these comma-separated list of users can execute scripts, block dongles, reload the gwys.txt
|
||||
# if empty, everyone has admin privileges.
|
||||
#link_link_unlink='' # if defined, comma-separated list of users that can link and unlink a repeater
|
||||
#link_no_link_unlink='' # if defined, comma-separated list of users that cannot link or unlink, it's a blacklist.
|
||||
# if a blacklist is defined and not empty, the link_unlink will not be read
|
||||
#link_incoming_ip='0.0.0.0' # incoming ip address of qnlink, '0.0.0.0' means accepts any connection.
|
||||
#link_ref_port=20001 # port for REF linking, don't change
|
||||
#link_xrf_port=30001 # port for XRF linking, don't change
|
||||
#link_dcs_port=30051 # port for DCS linking, don't change
|
||||
#link_announce=true # do link, unlink, etc. announcements
|
||||
#link_acknowledge=true # send text acknowledgment on key-up
|
||||
#link_max_dongles=5 # maximum number of linked hot-spots
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# Here is an example MMDVM module on 70cm channel B
|
||||
#
|
||||
module_b='mmdvm'
|
||||
#module_b_link_at_start='' # For example, set to 'REF001 C' to link module to reflector 1-charlie when the module starts.
|
||||
#module_b_inactivity=0 # if no activity for this many minutes unlink any linked reflector. Zero means no timer.
|
||||
#module_b_callsign='' # if you operate in a 'restriction mode', use your personal callsign. Usually leave this empty.
|
||||
#module_b_packet_wait=25 # how many milliseconds to wait on packets in a voicestream
|
||||
#module_b_acknowledge=false # Do you want an ACK back?
|
||||
#module_b_ack_delay=250 # millisecond delay before acknowledgement
|
||||
#module_b_frequency=0 # if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
||||
#module_b_offset=0 # usually the duplex tx-rx offset, but for dvap, it's a frequency tweak
|
||||
#module_b_range=0 # the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
#module_b_agl=0 # the height above ground level for this repeater's antenna
|
||||
#module_b_latitude=0 # you can leave this unspecified for a mobile rig
|
||||
#module_b_longitude=0 # like the latitude
|
||||
#module_b_desc1='' # maximum of 20 characters, most special symbols are not allowed
|
||||
#module_b_desc2='' # just like desc1
|
||||
#module_b_gate2modem1='gate2modem1' # Unix Sockets between a modem and the gateway
|
||||
#module_b_modem2gate1='modem2gate1' # 0 is for A, 1 is for B and 2 is for C
|
||||
#module_b_url='github.com/n7tae/g2_ircddb' # 80 characters max
|
||||
# MMDVM - Special parameters when: module_b='mmdvm'
|
||||
#module_b_internal_ip='0.0.0.0' # where MMDVMHost will find the QnetRelay program
|
||||
#module_b_gateway_port=20010 # which port will QnetRelay be sending on
|
||||
#module_b_local_port=20011 # which port will MMDVMHost be sending on
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# Here is an example ICOM Terminal and Access Point (ITAP) module specified on 2m channel C
|
||||
#
|
||||
module_c='itap'
|
||||
#module_c_link_at_start='' # For example, set to 'REF001 C' to link module to reflector 1-charlie when the module starts.
|
||||
#module_c_inactivity=0 # if no activity for this many minutes unlink any linked reflector. Zero means no timer.
|
||||
#module_c_callsign='' # if you operate in a 'restriction mode', use your personal callsign. Usually leave this empty.
|
||||
#module_c_packet_wait=25 # how many milliseconds to wait on packets in a voicestream
|
||||
#module_c_acknowledge=false # Do you want an ACK back?
|
||||
#module_c_ack_delay=250 # millisecond delay before acknowledgement
|
||||
#module_c_frequency=0 # if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
||||
#module_c_offset=0 # usually the duplex tx-rx offset, but for dvap, it's a frequency tweak
|
||||
#module_c_range=0 # the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
#module_c_agl=0 # the height above ground level for this repeater's antenna
|
||||
#module_c_latitude=0 # you can leave this unspecified for a mobile rig
|
||||
#module_c_longitude=0 # like the latitude
|
||||
#module_c_desc1='' # maximum of 20 characters, most special symbols are not allowed
|
||||
#module_c_desc2='' # just like desc1
|
||||
#module_c_gate2modem1='gate2modem1' # Unix Sockets between a modem and the gateway
|
||||
#module_c_modem2gate1='modem2gate1' # 0 is for A, 1 is for B and 2 is for C
|
||||
#module_c_url='github.com/n7tae/g2_ircddb' # 80 characters max
|
||||
# ITAP - Special parameters when: module_c='itap'
|
||||
#module_c_device='/dev/ttyUSB0' # where the serial-to-USB cable shows up
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# DVAP - Here is an example 2M dvap
|
||||
#
|
||||
module_c='itap'
|
||||
#module_c_link_at_start='' # For example, set to 'REF001 C' to link module to reflector 1-charlie when the module starts.
|
||||
#module_c_inactivity=0 # if no activity for this many minutes unlink any linked reflector. Zero means no timer.
|
||||
#module_c_callsign='' # if you operate in a 'restriction mode', use your personal callsign. Usually leave this empty.
|
||||
#module_c_packet_wait=25 # how many milliseconds to wait on packets in a voicestream
|
||||
#module_c_acknowledge=false # Do you want an ACK back?
|
||||
#module_c_ack_delay=250 # millisecond delay before acknowledgement
|
||||
#module_c_frequency=0 # if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
||||
#module_c_offset=0 # usually the duplex tx-rx offset, but for dvap, it's a frequency tweak
|
||||
#module_c_range=0 # the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
#module_c_agl=0 # the height above ground level for this repeater's antenna
|
||||
#module_c_latitude=0 # you can leave this unspecified for a mobile rig
|
||||
#module_c_longitude=0 # like the latitude
|
||||
#module_c_desc1='' # maximum of 20 characters, most special symbols are not allowed
|
||||
#module_c_desc2='' # just like desc1
|
||||
#module_c_gate2modem1='gate2modem1' # Unix Sockets between a modem and the gateway
|
||||
#module_c_modem2gate1='modem2gate1' # 0 is for A, 1 is for B and 2 is for C
|
||||
#module_c_url='github.com/n7tae/g2_ircddb' # 80 characters max
|
||||
# DVAP - Special parameters when: module_c='dvap'
|
||||
#module_c_power=10 # TX power level: -12 to 10, 10 is maximum power
|
||||
#module_c_squelch=-100 # RX Squelch: -128 to -45, -100 to -80 usually works best
|
||||
#module_c_serial_number='APXXXXXX' # The serial number of your DVAP is visible through the bottom of the case
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# DVRPTR - Here is an example 70cm dvrptr
|
||||
#
|
||||
module_b='dvrptr'
|
||||
#module_b_link_at_start='' # For example, set to 'REF001 C' to link module to reflector 1-charlie when the module starts.
|
||||
#module_b_inactivity=0 # if no activity for this many minutes unlink any linked reflector. Zero means no timer.
|
||||
#module_b_callsign='' # if you operate in a 'restriction mode', use your personal callsign. Usually leave this empty.
|
||||
#module_b_packet_wait=25 # how many milliseconds to wait on packets in a voicestream
|
||||
#module_b_acknowledge=false # Do you want an ACK back?
|
||||
#module_b_ack_delay=250 # millisecond delay before acknowledgement
|
||||
#module_b_frequency=0 # if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
||||
#module_b_offset=0 # usually the duplex tx-rx offset, but for dvap, it's a frequency tweak
|
||||
#module_b_range=0 # the range of this repeater, in meters 1609.344 meters is 1.0 miles
|
||||
#module_b_agl=0 # the height above ground level for this repeater's antenna
|
||||
#module_b_latitude=0 # you can leave this unspecified for a mobile rig
|
||||
#module_b_longitude=0 # like the latitude
|
||||
#module_b_desc1='' # maximum of 20 characters, most special symbols are not allowed
|
||||
#module_b_desc2='' # just like desc1
|
||||
#module_b_gate2modem1='gate2modem1' # Unix Sockets between a modem and the gateway
|
||||
#module_b_modem2gate1='modem2gate1' # 0 is for A, 1 is for B and 2 is for C
|
||||
#module_b_url='github.com/n7tae/g2_ircddb' # 80 characters max
|
||||
# DVRPTR - Special parameters when: module_b='dvrptr'
|
||||
# if you don't know what your DVRPTR serial number is, look in the log file after running qndvrptr
|
||||
#module_b_serial_number='00.00.00.00' # the DVRPTR serial number
|
||||
#module_b_rf_on='RFON' # put this in YRCALL to disable the channel
|
||||
#module_b_rf_off='RFOFF' # put this in YRCALL to enable the channel
|
||||
#module_b_rf_rx_level=80 # see the DVRPTR V1 manual
|
||||
#module_b_duplex=false # set to true if the module is duplex
|
||||
#module_b_tx_delay=250 # milliseconds to allow for switching from rx to tx
|
||||
#module_b_rqst_count=10 # number of 2-sec intervals before the an unresponsive system is killed
|
||||
#module_b_inverse_rx=true # if you're not hearing anything, try false
|
||||
#module_b_inverse_tx=true # if you're not being heard, try false
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# LOGGING - Control extra logging - useful for debugging
|
||||
#
|
||||
#log_qso=false # QSO info goes into the log
|
||||
#log_irc=false # IRC debug info
|
||||
#log_dtmf=false # DTMF debug info
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# DPLUS - Control of dplus (trust system) linking to repeaters and REF reflectors
|
||||
#
|
||||
# The following settings do not affect your ability to use dplus linking to XRF or XLX reflectors!
|
||||
# You must be registered on the DPlus system, see www.dstargateway.org, otherwise authorization will fail,
|
||||
# even if QnetLink reports a successful authorization.
|
||||
|
||||
# authorize = false # uncomment and set to true if you want to use the closed-source DPlus reflectors and/or repeaters
|
||||
# use_reflectors = true # uncomment and set to false if you are not going to link to DPlus reflectors
|
||||
# use_repeaters = true # uncomment and set to false if you are not going to link to DPlus repeaters
|
||||
|
||||
# any values specified in your gwys.txt file will override any reflectors or repeaters that DPlus authorization returns.
|
||||
}
|
||||
|
||||
file = {
|
||||
# status = "/usr/local/etc/rptr_status" # where repeater status info is passed between services
|
||||
# DTMF = "/tmp" #
|
||||
# echotest = "/tmp" # echo dat files will end up here
|
||||
# qnvoicefile = /tmp/qnvoice.txt # where qnvoice will create the play command
|
||||
# gwys = "/usr/local/etc/gwys.txt" # where the list of gateways and reflectors (with ports) is.
|
||||
# announce_dir = "/usr/local/etc" # where are the *.dat files for the verbal link, unlink, etc. announcements
|
||||
}
|
||||
|
||||
timing = {
|
||||
timeout = {
|
||||
# echo = 1 # delay time in seconds for echo
|
||||
# voicemail = 1 # delay time for voicemail
|
||||
# remote_g2 = 2 # after this many seconds with no packets, we assume the tx is closed
|
||||
# local_rptr = 1 # local timeout, in seconds
|
||||
}
|
||||
|
||||
play = {
|
||||
# wait = 1 # seconds before playback occurs, between 1 and 10
|
||||
# delay = 19 # microseconds between frames playback, if echo sounds bad, adjust this up or down 1,2 microseconds
|
||||
}
|
||||
|
||||
inactivity = {
|
||||
# a = 0 # unlink repeater if no activity for this many minutes
|
||||
# b = 0 # zero mean there will be no timer
|
||||
# c = 0
|
||||
}
|
||||
}
|
||||
#dplus_authorize=false # to enable, uncomment and set to true to link to DPlus reflectors and/or repeaters
|
||||
#dplus_ref_login='' # for logging into REF reflectors, if empty, ircddb_login will be used
|
||||
#dplus_use_reflectors=true # set to false if you are not going to link to DPlus reflectors
|
||||
#dplus_use_repeaters=true # set to false if you are not going to link to DPlus repeaters
|
||||
# any gateways in your gwys.txt file will override any reflectors or repeaters that DPlus authorization returns.
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# FILE - where important QnetGateway files and directories are found.
|
||||
#
|
||||
#file_status='/usr/local/etc/rptr_status' # where repeater status info is passed between services
|
||||
#file_dtmf='/tmp' # where DTMF is decoded
|
||||
#file_echotest='/tmp' # echo dat files will end up here
|
||||
#file_qnvoicefile='/tmp/qnvoice.txt' # where qnvoice will create the play command
|
||||
#file_gwys='/usr/local/etc/gwys.txt' # where the list of gateways and reflectors (with ports) is.
|
||||
#file_announce_dir='/usr/local/etc' # where the *.dat files are for the verbal link, unlink, etc. announcements
|
||||
|
||||
##########################################################################################################################
|
||||
#
|
||||
# TIMINGS - for controlling how to deal with timing issues
|
||||
#
|
||||
# most users will not have to override any of these default values
|
||||
#timing_timeout_echo=1 # seconds before we assume echo has timed out
|
||||
#timing_timeout_voicemail=1 # seconds before we assume voicemail has timed out
|
||||
#timing_timeout_remote_g2=2 # after this many seconds with no packets, we assume the tx is closed
|
||||
#timing_timeout_local_rptr=1 # local repeater timeout, in seconds
|
||||
#timing_play_wait=1 # seconds before echo or voicemail playback occurs, between 1 and 10
|
||||
#timing_play_delay=19 # microseconds between frames playback, if echo sounds bad, adjust this up or down 1 or 2 ms
|
||||
|
||||
@ -1,152 +0,0 @@
|
||||
# Qnet Gateway Configuration
|
||||
|
||||
ircddb = {
|
||||
login = "CHANGEME!!!!"; # login callsign for the ircDDB network
|
||||
# host = "rr.openquad.net" # other include group1-irc.ircddb.net
|
||||
# port = 9007 # not a good idea to change!
|
||||
# password = "1111111111111" # not needed for rr.openquad.net
|
||||
}
|
||||
|
||||
gateway = {
|
||||
# regen_header = true # regenerate headers from incoming data
|
||||
# send_qrgs_maps = true # send frequecy, offset, cooridinates and url to irc-server
|
||||
# local_irc_ip = "0.0.0.0" # 0.0.0.0 means accept any incoming connections
|
||||
# aprs_send = true # send info to aprs
|
||||
# ip = "127.0.0.1" # where the gateway is running
|
||||
|
||||
external = {
|
||||
# ip = "0.0.0.0"
|
||||
# port = 40000
|
||||
}
|
||||
|
||||
internal = {
|
||||
# ip = "172.16.0.20"
|
||||
# port = 20000
|
||||
}
|
||||
}
|
||||
|
||||
module = {
|
||||
a = { # an ICOM full stack might consist of up to three module
|
||||
# Sorry, the 23 cm data module is not yet supported
|
||||
# 23 cm module will use "a"
|
||||
# 70 cm module will use "b"
|
||||
# 2 M module will use "c"
|
||||
# type = "icom" # you must define at least one module by uncommenting the type
|
||||
# ip = "172.16.0.1" # all icom modules should have the same IP address
|
||||
# port = 20000 # all icom modules should have the same UDP port
|
||||
# frequency = 0 # in MHz, if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
||||
# offset = 0
|
||||
# range = 0 # the range of this repeater, in meters. 1609.344 meters is 1.0 miles
|
||||
# agl = 0 # the height above ground level for this repeater's antenna
|
||||
# latitude = 0 # you can leave this unspecified for a mobile rig
|
||||
# longitude = 0 # like the latitude
|
||||
# desc1 = "" # maximum of 20 characters, most special symbols are not allowed
|
||||
# desc2 = "" # just like desc1
|
||||
# url = "github.com/n7tae/g2_ircddb" # 80 characters max
|
||||
}
|
||||
|
||||
b = {
|
||||
# type = "icom"
|
||||
# ip = "172.16.0.1" # all icom modules should have the same IP address
|
||||
# port = 20000 # all icom modules should have the same UDP port
|
||||
# frequency = 0
|
||||
# offset = 0
|
||||
# range = 0.0
|
||||
# agl = 0.0
|
||||
# latitude = 0.0
|
||||
# longitude = 0.0
|
||||
# desc1 = ""
|
||||
# desc2 = ""
|
||||
# url = "github.com/n7tae/g2_ircddb"
|
||||
}
|
||||
|
||||
c = {
|
||||
# type = "icom"
|
||||
# ip = "172.16.0.1" # all icom modules should have the same IP address
|
||||
# port = 20000 # all icom modules should have the same UDP port
|
||||
# frequency = 0
|
||||
# dvap_offset = 0
|
||||
# range = 0.0
|
||||
# agl = 0.0
|
||||
# latitude = 0.0
|
||||
# longitude = 0.0
|
||||
# desc1 = ""
|
||||
# desc2 = ""
|
||||
# url = "github.com/n7tae/QnetGateway"
|
||||
}
|
||||
}
|
||||
|
||||
log = {
|
||||
# debuging and extra logging switches
|
||||
# qso = false # QSO info goes into the log
|
||||
# irc = false # IRC debug info
|
||||
# dtmf = false # DTMF debug info
|
||||
}
|
||||
|
||||
aprs = { # APRS.NET connect info
|
||||
# host = "rotate.aprs.net"
|
||||
# port = 14580
|
||||
# interval = 40
|
||||
# filter = ""
|
||||
}
|
||||
|
||||
link = {
|
||||
# link_at_start = "NONE" # Link to a reflector at startup.
|
||||
# to link repeater module B to REF001 C, use "BREF001C"
|
||||
# ref_login = "" # for loging into REF reflectors, if undefined, ircddb.username will be used
|
||||
# admin = [ "CALL1", "CALL2", "CALL3" ] # only these users can execute scripts, block dongles and reload the gwys.txt
|
||||
# # you probabaly want you own callsign in the admin list!
|
||||
# link_unlink = [ "CALL4", "CALL5", "CALL6" ] # if defined, only these users can link and unlink a repeater
|
||||
# no_link_unlink = [ "CALL7", "CALL8", "CALL9" ] # if defined, these users cannot link or unlink, it's a blacklist
|
||||
# # if the blacklist is defined (even if it's empty), the link_unlink will not be read
|
||||
# incoming_ip = "0.0.0.0" # incoming ip address, "0.0.0.0" means accepts all connections.
|
||||
# ip = "127.0.0.1" # where g2_link is running
|
||||
# port = 18997 # port for communications to g2_link
|
||||
# ref_port = 20001 # port for REF linking, don't change
|
||||
# xrf_port = 30001 # port for XRF linking, don't change
|
||||
# dcs_port = 30051 # port for DCS linking, don't change
|
||||
# announce = true # do link, unlink, etc. announcements
|
||||
# acknowledge = true # send text acknowledgement on key-up
|
||||
# max_dongles = 5 # maximum number of linked hotspots
|
||||
}
|
||||
|
||||
dplus = {
|
||||
# The following settings do not affect your ability to use dplus linking to XRF or XLX reflectors!
|
||||
# You must be registered on the DPlus system, see www.dstargateway.org, otherwise authorization will fail,
|
||||
# even if QnetLink reports a successful authorization.
|
||||
|
||||
# authorize = false # uncomment and set to true if you want to use the closed-source DPlus reflectors and/or repeaters
|
||||
# use_reflectors = true # uncomment and set to false if you are not going to link to DPlus reflectors
|
||||
# use_repeaters = true # uncomment and set to false if you are not going to link to DPlus repeaters
|
||||
|
||||
# any values specified in your gwys.txt file will override any reflectors or repeaters that DPlus authorization returns.
|
||||
}
|
||||
|
||||
file = {
|
||||
# status = "/usr/local/etc/rptr_status" # where repeater status info is passed between services
|
||||
# DTMF = "/tmp" #
|
||||
# echotest = "/tmp" # echo dat files will end up here
|
||||
# qnvoicefile = /tmp/qnvoice.txt # where qnvoice will create the play command
|
||||
# gwys = "/usr/local/etc/gwys.txt" # where the list of gateways and reflectors (with ports) is.
|
||||
# announce_dir = "/usr/local/etc" # where are the *.dat files for the verbal link, unlink, etc. announcements
|
||||
}
|
||||
|
||||
timing = {
|
||||
timeout = {
|
||||
# echo = 1 # delay time in seconds for echo
|
||||
# voicemail = 1 # delay time for voicemail
|
||||
# remote_g2 = 2 # after this many seconds with no packets, we assume the tx is closed
|
||||
# local_rptr = 1 # local timeout, in seconds
|
||||
}
|
||||
|
||||
play = {
|
||||
# wait = 1 # seconds before playback occurs, between 1 and 10
|
||||
# delay = 19 # microseconds between frames playback, if echo sounds bad, adjust this up or down 1,2 microseconds
|
||||
}
|
||||
|
||||
inactivity = {
|
||||
# a = 0 # unlink repeater if no activity for this many minutes
|
||||
# b = 0 # zero mean there will be no timer
|
||||
# c = 0
|
||||
}
|
||||
}
|
||||
@ -1,44 +1,7 @@
|
||||
# g2_ircddb Configuration for me
|
||||
# A Simple Configuration File for an ICOM using Terminal and Access Point Mode
|
||||
|
||||
ircddb = {
|
||||
login = "XX0XXX"
|
||||
# If you are not using rr.openquad.net, you need to specify the host and possibly the password.
|
||||
#
|
||||
# host = "some.server.host" // others include group1-irc.ircddb.net
|
||||
# password = "1111111111111" // not needed for rr.openquad.net
|
||||
}
|
||||
ircddb_login='Q0Q0ABC'
|
||||
|
||||
module = {
|
||||
c = { // change the module to "b" if you are operating on the UHF band
|
||||
type = "itap"
|
||||
# device = "/dev/ttyUSB0" // if your serial-to-usb cable ends up on another device, then specify here
|
||||
# uncomment and set if you want the following to appear on you ircddb host website.
|
||||
# frequency = 145.5 // this is the default value, chose a quiet frequency
|
||||
# range = 0.0 // in meters (1609.344 is one mile)
|
||||
# agl = 0.0 // in meters
|
||||
# latitude = 0.000000 // north is positive
|
||||
# longitude = 0.000000 // east is positive
|
||||
# desc1 = "Location1" // up to 20 chars
|
||||
# desc2 = "location2" // up to 20 chars
|
||||
}
|
||||
}
|
||||
module_c='itap'
|
||||
|
||||
link = {
|
||||
# add the callsigns that can shutdown or reboot your system
|
||||
# admin = [ "XX0XXX" , "YY0YYY" ] // only these users can execute scripts
|
||||
|
||||
# link to the reflector of your choice. the first character is the module you are linking.
|
||||
# link_at_start = "CREF001C"
|
||||
}
|
||||
|
||||
dplus = {
|
||||
# The following settings do not affect your ability to use dplus linking to XRF or XLX reflectors!
|
||||
# You must be registered on the DPlus system, see www.dstargateway.org, otherwise authorization will fail,
|
||||
# even if QnetLink reports a successful authorization.
|
||||
|
||||
# authorize = false # uncomment and set to true if you want to use the closed-source DPlus reflectors and/or repeaters
|
||||
# use_reflectors = true # uncomment and set to false if you are not going to link to DPlus reflectors
|
||||
# use_repeaters = true # uncomment and set to false if you are not going to link to DPlus repeaters
|
||||
|
||||
# any values specified in your gwys.txt file will override any reflectors or repeaters that DPlus authorization returns.
|
||||
}
|
||||
#dplus_authorize=true # uncomment if you want to use the closed-source DPlus reflectors and/or repeaters
|
||||
|
||||
Loading…
Reference in new issue