icom additions

Makefile

@@ -47,6 +47,7 @@ all    : $(ALL_PROGRAMS)
 mmdvm  : $(MDV_PROGRAMS)
 dvap   : $(DVP_PROGRAMS)
 dvrptr : $(DVR_PROGRAMS)
+icom   : $(ICM_PROGRAMS)
 
 qngateway : $(IRCOBJS) QnetGateway.o aprs.o
 	g++ $(CPPFLAGS) -o qngateway QnetGateway.o aprs.o $(IRCOBJS) $(LDFLAGS) -pthread

qn.everything.cfg

@@ -1,10 +1,10 @@
-# g2_ircddb Configuration
+# Qnet Gateway Configuration
 
 ircddb = {
 	login = "CHANGEME!!!!";     # login callsign for the ircDDB network
 #	host = "rr.openquad.net"    # other include group1-irc.ircddb.net
 #	port = 9007					# not a good idea to change!
-#	password = "1111111111111"	# not needed for Openquad
+#	password = "1111111111111"	# not needed for rr.openquad.net
 }
 
 gateway = {

qn.icom.cfg

@@ -0,0 +1,139 @@
+# Qnet Gateway Configuration
+
+ircddb = {
+	login = "CHANGEME!!!!";     # login callsign for the ircDDB network
+#	host = "rr.openquad.net"    # other include group1-irc.ircddb.net
+#	port = 9007					# not a good idea to change!
+#	password = "1111111111111"	# not needed for rr.openquad.net
+}
+
+gateway = {
+#	regen_header = true        # regenerate headers from incoming data
+#	send_qrgs_maps = true      # send frequecy, offset, cooridinates and url to irc-server
+#	local_irc_ip = "0.0.0.0"   # 0.0.0.0 means accept any incoming connections
+#	aprs_send = true           # send info to aprs
+#	ip = "127.0.0.1"           # where the gateway is running
+
+    external = {
+#		ip = "0.0.0.0"
+#		port = 40000
+	}
+
+	internal = {
+#		ip = "172.16.0.1"
+#		port = 20000
+	}
+}
+
+#module = {
+	a = { # an ICOM full stack might consist of up to three module
+	      # Sorry, the 23 cm data module is not yet supported
+          # 23 cm module will use "a"
+          # 70 cm module will use "b"
+          #  2  M module will use "c"
+#		type = "icom"      # you must define at least one module by uncommenting the type 
+#		ip = "172.16.0.20" # all icom modules should have the same IP address
+#		port = 20000       # all icom modules should have the same UDP port
+#		frequency = 0      # in MHz, if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
+#		offset = 0
+#		range = 0          # the range of this repeater, in meters. 1609.344 meters is 1.0 miles
+#       agl = 0            # the height above ground level for this repeater's antenna
+#		latitude = 0       # you can leave this unspecified for a mobile rig
+#		longitude = 0      # like the latitude
+#		desc1 = ""         # maximum of 20 characters, most special symbols are not allowed
+#		desc2 = ""         # just like desc1
+#		url = "github.com/n7tae/g2_ircddb"    # 80 characters max
+	}
+
+	b = {
+#		type = "icom"
+#		ip = "172.16.0.20" # all icom modules should have the same IP address
+#		port = 20000       # all icom modules should have the same UDP port
+#		frequency = 0
+#		offset = 0
+#		range = 0.0
+#		agl = 0.0
+#		latitude = 0.0
+#		longitude = 0.0
+#		desc1 = ""
+#		desc2 = ""
+#		url = "github.com/n7tae/g2_ircddb"
+	}
+
+	c = {
+#		type = "icom"
+#		ip = "172.16.0.20" # all icom modules should have the same IP address
+#		port = 20000       # all icom modules should have the same UDP port
+#		frequency = 0
+#		dvap_offset = 0
+#		range = 0.0
+#		agl = 0.0
+#		latitude = 0.0
+#		longitude = 0.0
+#		desc1 = ""
+#		desc2 = ""
+#		url = "github.com/n7tae/QnetGateway"
+	}
+}
+
+log = {
+	# debuging and extra logging switches
+#	qso = false     # QSO info goes into the log
+#	irc = false     # IRC debug info
+#	dtmf = false    # DTMF debug info
+}
+
+aprs = { 	# APRS.NET connect info
+#	host = "rotate.aprs.net"
+#	port = 14580
+#	interval = 40
+#	filter = ""
+}
+
+link = {
+#	link_at_start = "NONE" # Link to a reflector at startup.
+#                             to link repeater module B to REF001 C, use "BREF001C"
+#	ref_login = ""             # for loging into REF reflectors, if undefined, ircddb.username will be used
+#	admin = [ "CALL1", "CALL2", "CALL3" ]          # only these users can execute scripts, block dongles and reload the gwys.txt
+#	                                               # you probabaly want you own callsign in the admin list!
+#	link_unlink = [ "CALL4", "CALL5", "CALL6" ]    # if defined, only these users can link and unlink a repeater
+#   no_link_unlink = [ "CALL7", "CALL8", "CALL9" ] # if defined, these users cannot link or unlink, it's a blacklist
+#												   # if the blacklist is defined (even if it's empty), the link_unlink will not be read
+#	incoming_ip = "0.0.0.0"     # incoming ip address, "0.0.0.0" means accepts all connections.
+#	ip = "127.0.0.1"   # where g2_link is running
+#	port = 18997       # port for communications to g2_link
+#	ref_port = 20001   # port for REF linking, don't change
+#	xrf_port = 30001   # port for XRF linking, don't change
+#	dcs_port = 30051   # port for DCS linking, don't change
+#	announce = true    # do link, unlink, etc. announcements
+#	acknowledge = true # send text acknowledgement on key-up
+#	max_dongles = 5    # maximum number of linked hotspots
+}
+
+file = {
+#	status = "/usr/local/etc/rptr_status"  # where repeater status info is passed between services
+#	DTMF = "/tmp"                          #
+#	echotest = "/tmp"                      # echo dat files will end up here
+#	gwys = "/usr/local/etc/gwys.txt"       # where the list of gateways and reflectors (with ports) is.
+#	announce_dir = "/usr/local/etc"        # where are the *.dat files for the verbal link, unlink, etc. announcements
+}
+
+timing = {
+	timeout = {
+#		echo = 1         # delay time in seconds for echo
+#		voicemail = 1    # delay time for voicemail
+#		remote_g2 = 2    # after this many seconds with no packets, we assume the tx is closed
+#		local_rptr = 1   # local timeout, in seconds
+	}
+
+	play = {
+#		wait = 2          # seconds before playback occurs, between 1 and 10
+#		delay = 19        # microseconds between frames playback, if echo sounds bad, adjust this up or down 1,2 microseconds
+	}
+
+	inactivity = {
+#		a = 0             # unlink repeater if no activity for this many minutes
+#		b = 0             # zero mean there will be no timer
+#		c = 0
+	}
+}