Revert "Add config template for MMDVM_HS_Dual_Hat"

This reverts commit 3ad4299e03.

Config.h

@@ -23,11 +23,11 @@
 // 1) ZUMspot RPi or ZUMspot USB:
 // #define ZUMSPOT_ADF7021
 // 2) Libre Kit board or any homebrew hotspot with modified RF7021SE and Blue Pill STM32F103:
-// #define LIBRE_KIT_ADF7021
+#define LIBRE_KIT_ADF7021
 // 3) MMDVM_HS_Hat revisions 1.1, 1.2 and 1.4 (DB9MAT & DF2ET)
 // #define MMDVM_HS_HAT_REV12
 // 4) MMDVM_HS_Dual_Hat revisions 1.0 (DB9MAT & DF2ET & DO7EN)
-#define MMDVM_HS_DUAL_HAT_REV10
+// #define MMDVM_HS_DUAL_HAT_REV10
 // 5) Nano hotSPOT (BI7JTA)
 // #define NANO_HOTSPOT
 
@@ -35,7 +35,7 @@
 #define ENABLE_ADF7021
 
 // Enable full duplex support with dual ADF7021 (valid for homebrew hotspots only):
-#define DUPLEX
+// #define DUPLEX
 
 // TCXO of the ADF7021
 // For 14.7456 MHz:
@@ -44,14 +44,14 @@
 // #define ADF7021_12_2880
 
 // Host communication selection:
-#define STM32_USART1_HOST
+// #define STM32_USART1_HOST
-// #define STM32_USB_HOST
+#define STM32_USB_HOST
 
 // Enable mode detection:
 #define ENABLE_SCAN_MODE
 
 // Send RSSI value:
-#define SEND_RSSI_DATA
+// #define SEND_RSSI_DATA
 
 // Enable Nextion LCD serial port repeater on USART2 (ZUMspot Libre Kit and ZUMspot RPi):
 #define SERIAL_REPEATER

configs/MMDVM_HS_Dual_Hat.h

@@ -1,71 +0,0 @@
-/*
- *   Copyright (C) 2017,2018 by Andy Uribe CA6JAU
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(CONFIG_H)
-#define  CONFIG_H
-
-// Select one board (STM32F103 based boards)
-// 1) ZUMspot RPi or ZUMspot USB:
-// #define ZUMSPOT_ADF7021
-// 2) Libre Kit board or any homebrew hotspot with modified RF7021SE and Blue Pill STM32F103:
-// #define LIBRE_KIT_ADF7021
-// 3) MMDVM_HS_Hat revisions 1.1, 1.2 and 1.4 (DB9MAT & DF2ET)
-// #define MMDVM_HS_HAT_REV12
-// 4) MMDVM_HS_Dual_Hat revisions 1.0 (DB9MAT & DF2ET & DO7EN)
-#define MMDVM_HS_DUAL_HAT_REV10
-// 5) Nano hotSPOT (BI7JTA)
-// #define NANO_HOTSPOT
-
-// Enable ADF7021 support:
-#define ENABLE_ADF7021
-
-// Enable full duplex support with dual ADF7021 (valid for homebrew hotspots only):
-#define DUPLEX
-
-// TCXO of the ADF7021
-// For 14.7456 MHz:
-#define ADF7021_14_7456
-// For 12.2880 MHz:
-// #define ADF7021_12_2880
-
-// Host communication selection:
-#define STM32_USART1_HOST
-// #define STM32_USB_HOST
-
-// Enable mode detection:
-#define ENABLE_SCAN_MODE
-
-// Send RSSI value:
-#define SEND_RSSI_DATA
-
-// Enable Nextion LCD serial port repeater on USART2 (ZUMspot Libre Kit and ZUMspot RPi):
-#define SERIAL_REPEATER
-
-// Enable Nextion LCD serial port repeater on USART1 (Do not use with STM32_USART1_HOST enabled):
-// #define SERIAL_REPEATER_USART1
-
-// Enable P25 Wide modulation:
-// #define ENABLE_P25_WIDE
-
-// Disable mode LEDs blink during scan mode:
-// #define QUIET_MODE_LEDS
-
-// Enable modem debug messages
-// #define ENABLE_DEBUG
-
-#endif