Expand Rheem diagnostics and Kiosk Satellite staging

pull/1898/head
Carlo Costanzo 3 months ago
parent f9f6cee402
commit 773f58513f

@ -66,6 +66,8 @@ This folder holds YAML-managed Home Assistant Lovelace dashboards and UI resourc
The displays share only the reusable event and screen-policy state they need. Kitchen keeps its clock/current-weather/forecast banner and rotating household context, including the next confirmed cruise countdown, while the fixed-landscape Bedroom dashboard omits the redundant clock and uses that space for the next wake alarm, security/weather context, larger Front Lawn and Driveway feeds, and a readable household alert. Both use the same Garage-then-Front-Door event priority, with Garage held for three minutes after both doors close before the default dashboard returns. The canonical Bedroom Lovelace view and its Android 5 lightweight renderer consume the same camera, header, and alert sensors; the renderer bypasses only the unsupported Home Assistant frontend on the frozen Fire WebView. Kitchen uses native Kiosk Satellite camera overlays and idle dimming; Home Assistant handles only household sleep/away enforcement, volume, and event-camera wake instead of periodically forcing the screen on. Nearby rain or lightning starts one five-minute NOAA radar takeover during daylight; afterward, the rotating Storms Approaching banner can replay the latest 20-minute radar loop while the weather event remains active. Actionable NWS, package, family-location, entry-point, Phyn, and low-hot-water slides open a shared short-lived detail surface; the family map centers only the person named by the tapped slide and shows that person's prior 24-hour trail, while a closed Phyn main valve can be restored only from its detail view after explicit confirmation. The ambient wall remains in place after sunset. True idle panel-off remains disabled until the Crown LineageOS device has a reliable motion-wake input. Its device schedule changes the Home Assistant theme between light at 07:00 and dark at 19:00. Other clients follow their own system preference.
Kitchen's native Kiosk Satellite overlays use the imported Home Assistant camera entities, with HLS preferred over WebRTC on the Fire/WebView-class Kitchen Show display.
### How it is wired into Home Assistant
This folder is referenced from `config/configuration.yaml` via:
- `lovelace.resource_mode: yaml`

@ -6,12 +6,14 @@
# Systems Partial - operations summary
# House-system health strip, active issues, and datacenter status.
# -------------------------------------------------------------------
# Related Issue: 1890
# Notes: The health ribbon mirrors the visible dashboard navigation order and labels.
# Notes: DNS and external-monitoring faults roll up under Network instead of duplicating it.
# Notes: Network trend panels live on Network so Overview stays focused on broad house status.
# Notes: Power & Solar shows realtime flow; accumulated history remains in Energy.
# Notes: Scheduled Proxmox maintenance and sustained WAN quality/reset warnings render amber; critical conditions remain red.
# Notes: Active Issue rows enumerate faults, scheduled maintenance, and reset urgency so drill-down is optional for initial triage.
# Notes: Home Water and Systems surface normalized Rheem faults; telemetry-only loss renders amber.
# Notes: Back to Overview is the first control in the landing-view navigation strip.
######################################################################
@ -59,22 +61,31 @@
raw_suffix: ACTIVE
warning_entity_ids:
- binary_sensor.infra_wan_sustained_degradation
- binary_sensor.rheem_wh_telemetry_stale
critical_entity_ids:
- binary_sensor.infra_wan_critical
- binary_sensor.infra_dns_pihole_degraded
- binary_sensor.infra_compute_degraded
- binary_sensor.infra_storage_degraded
- binary_sensor.infra_external_monitoring_degraded
- binary_sensor.rheem_wh_active_alert
- binary_sensor.garage_phyn_leak_alert
- type: custom:button-card
template: bearstone_infra_status_kpi
entity: binary_sensor.garage_phyn_leak_alert
entity: binary_sensor.home_water_problem
name: Home Water
icon: mdi:shield-water-outline
variables:
ok_state: 'off'
healthy_text: CLEAR
alert_text: LEAK
warning_text: TELEMETRY
alert_text: CHECK
critical_entity_ids:
- binary_sensor.rheem_wh_active_alert
- binary_sensor.garage_phyn_leak_alert
warning_entity_ids:
- binary_sensor.rheem_wh_telemetry_stale
tap_action:
action: navigate
navigation_path: /dashboard-infrastructure/home-water

@ -6,9 +6,11 @@
# Systems Partial - Home Water
# Protection, live use, hot water, maintenance, outdoor water, and trends.
# -------------------------------------------------------------------
# Related Issue: 1890
# Notes: NAS, NVR, and unrelated house-temperature cards are omitted; refrigerator temperature stays with home safety.
# Notes: Maintenance rows reuse existing reset scripts through safe more-info flows.
# Notes: Active Phyn leak alerts are shown; the integration's stale latest-test leak flag is not an operator alert.
# Notes: Rheem alert, health, and telemetry faults render as an exception row backed by durable Repairs.
# Notes: Daily usage uses change on the same sum-only statistic configured in Energy.
# Notes: The overview ribbon prioritizes the next maintenance action and frequent controls without hidden grid placeholders.
# Notes: Refrigerator temperature remains a temporary Home Maintenance overview item until a better permanent view is chosen.
@ -451,6 +453,30 @@
template: bearstone_infra_panel_header
name: Hot Water System
- type: custom:button-card
template: bearstone_infra_alert_row
entity: binary_sensor.rheem_wh_problem
name: Rheem Needs Attention
icon: mdi:water-boiler-alert
variables:
alert_kind: binary_on
critical_entity_ids:
- binary_sensor.rheem_wh_active_alert
warning_entity_ids:
- binary_sensor.rheem_wh_telemetry_stale
exception_detail: >
[[[
const status = states['sensor.rheem_wh_diagnostic_status']?.state ?? 'unknown';
const count = states['sensor.rheem_wh_alert_count']?.state ?? 'unknown';
return `Status: ${String(status).replaceAll('_', ' ')} · Active alerts: ${count}`;
]]]
- type: custom:button-card
template: bearstone_infra_list_row
entity: sensor.rheem_wh_diagnostic_status
name: Diagnostic Status
icon: mdi:stethoscope
- type: custom:button-card
template: bearstone_infra_list_row
entity: sensor.rheem_wh_available_hot_water
@ -485,6 +511,12 @@
name: Active Alerts
icon: mdi:alert-circle-outline
- type: custom:button-card
template: bearstone_infra_list_row
entity: sensor.rheem_wh_last_alert_snapshot
name: Last New Alert
icon: mdi:alert-decagram-outline
- type: custom:button-card
template: bearstone_infra_list_row
entity: water_heater.rheem_wh

@ -61,7 +61,11 @@
warning_text: UPDATE AVAILABLE
alert_text: NEEDS ATTENTION
state_display: >
[[[ return String(entity?.attributes?.status ?? entity?.state ?? 'unknown').toUpperCase(); ]]]
[[[
const updateAvailable = states['update.kitchen_show_update']?.state === 'on';
if (entity?.state === 'off') return updateAvailable ? 'UPDATE AVAILABLE' : 'ONLINE';
return String(entity?.attributes?.status ?? entity?.state ?? 'unknown').toUpperCase();
]]]
tap_action:
action: navigate
navigation_path: /dashboard-kiosk-satellite-staging/home

@ -6,8 +6,10 @@
# Kiosk Satellite Staging Dashboard - Shared tablet camera surface
# Landscape-first Home Assistant dashboard for Kiosk Satellite devices.
# -------------------------------------------------------------------
# Related Issue: 1895
# Notes: Hidden preview dashboard; the production Bedroom kiosk remains unchanged.
# Notes: Contains no tablet controls; Kiosk Satellite handles native camera overlays.
# Notes: Kitchen Show uses imported Home Assistant cameras with HLS preferred over WebRTC for Fire/WebView playback.
######################################################################
title: Kiosk Satellite Preview

@ -6,13 +6,17 @@
# Kiosk Satellite Partial - Ambient kitchen display
# Enlarged camera feeds plus rotating household reminders, cruise countdown, and locations.
# -------------------------------------------------------------------
# Related Issue: 1890
# Related Issue: 1895
# Notes: Three-row landscape layout uses full-width clock and alert banners around the camera row.
# Notes: Camera cards use automatic streaming to limit idle tablet load.
# Notes: Native Garage and Front Door views take over for their matching live states.
# Notes: Kitchen Show Kiosk Satellite imports the HA camera sources and prefers HLS for native camera playback on Fire/WebView displays.
# Notes: Nearby rain or lightning starts a five-minute NOAA radar view only while the sun is above the horizon.
# Notes: After radar returns to the ambient wall, Storms Approaching offers another five-minute replay from the lower banner.
# Notes: Actionable banner slides open one shared full-screen detail surface and return automatically to the ambient wall.
# Notes: Family detail centers only the selected person and includes the prior 24-hour trail; Phyn detail includes a confirmed main-valve restore action.
# Notes: Rheem problem telemetry adds a red/amber water-heater slide and enriches the existing hot-water detail.
# Notes: The large-format lower panel otherwise mirrors read-only household fact entities.
# Notes: The clock uses oversized time text and places live conditions beneath the current-weather icon.
######################################################################
@ -184,6 +188,11 @@
- group.locks
- binary_sensor.front_door_packages_present
- sensor.rheem_wh_available_hot_water
- sensor.rheem_wh_alert_count
- sensor.rheem_wh_diagnostic_status
- binary_sensor.rheem_wh_problem
- binary_sensor.rheem_wh_active_alert
- binary_sensor.rheem_wh_telemetry_stale
- binary_sensor.rheem_wh_running
- sensor.rheem_wh_tank_health
- sensor.rheem_wh_compressor_health
@ -426,8 +435,31 @@
});
}
const rheemAlertCount = Number.parseInt(state('sensor.rheem_wh_alert_count'), 10);
const rheemStatus = state('sensor.rheem_wh_diagnostic_status');
const rheemProblem = state('binary_sensor.rheem_wh_problem') === 'on';
if (rheemProblem) {
const activeAlert = state('binary_sensor.rheem_wh_active_alert') === 'on';
const telemetryStale = state('binary_sensor.rheem_wh_telemetry_stale') === 'on';
items.push({
kicker: telemetryStale && !activeAlert ? 'WATER HEATER TELEMETRY' : 'WATER HEATER ALERT',
title: activeAlert && Number.isFinite(rheemAlertCount)
? `${rheemAlertCount} active ${rheemAlertCount === 1 ? 'alert' : 'alerts'}`
: `Rheem status: ${pretty(rheemStatus)}`,
detail: telemetryStale
? 'EcoNet data has been unavailable for 10 minutes · Tap for diagnostics'
: 'Home Assistant Repairs has the diagnostic snapshot · Tap for details',
icon: 'mdi:water-boiler-alert',
accent: telemetryStale && !activeAlert ? '#ef6c00' : '#c62828',
action: {
service: 'kitchen_kiosk_show_detail',
data: {detail_type: 'hot_water'}
}
});
}
const hotWater = Number.parseFloat(state('sensor.rheem_wh_available_hot_water'));
if (Number.isFinite(hotWater) && hotWater < 30) {
if (!rheemProblem && Number.isFinite(hotWater) && hotWater < 30) {
items.push({
kicker: 'HOT WATER',
title: 'Hot water is running low',
@ -706,15 +738,20 @@
`;
} else if (detailType === 'hot_water') {
const available = Number.parseFloat(state('sensor.rheem_wh_available_hot_water'));
const alertCount = Number.parseInt(state('sensor.rheem_wh_alert_count'), 10);
const diagnosticStatus = state('sensor.rheem_wh_diagnostic_status');
const rheemProblem = state('binary_sensor.rheem_wh_problem') === 'on';
const heater = states['water_heater.rheem_wh'];
const running = state('binary_sensor.rheem_wh_running') === 'on';
const target = Number.parseFloat(heater?.attributes?.temperature);
const mode = pretty(heater?.attributes?.operation_mode || heater?.state);
const tankHealth = Number.parseFloat(state('sensor.rheem_wh_tank_health'));
const compressorHealth = Number.parseFloat(state('sensor.rheem_wh_compressor_health'));
kicker = 'HOT WATER RECOVERY';
title = running ? 'Heating now' : 'Standing by';
icon = 'mdi:water-boiler';
kicker = rheemProblem ? 'WATER HEATER ALERT' : 'HOT WATER RECOVERY';
title = rheemProblem && Number.isFinite(alertCount) && alertCount > 0
? `${alertCount} active ${alertCount === 1 ? 'alert' : 'alerts'}`
: (running ? 'Heating now' : 'Standing by');
icon = rheemProblem ? 'mdi:water-boiler-alert' : 'mdi:water-boiler';
body = html`
<div class="kitchen-detail-hot-water">
<div class="kitchen-detail-hot-percent">${Number.isFinite(available) ? Math.round(available) : '--'}<span>%</span></div>
@ -725,6 +762,11 @@
<div class="kitchen-detail-metric"><span>TANK HEALTH</span><strong>${Number.isFinite(tankHealth) ? `${Math.round(tankHealth)}%` : 'Unknown'}</strong></div>
<div class="kitchen-detail-metric"><span>COMPRESSOR</span><strong>${Number.isFinite(compressorHealth) ? `${Math.round(compressorHealth)}%` : 'Unknown'}</strong></div>
</div>
${rheemProblem ? html`
<div class="kitchen-detail-alert-list">
STATUS: ${pretty(diagnosticStatus)} · ACTIVE ALERTS: ${Number.isFinite(alertCount) ? alertCount : 'Unknown'} · Check Repairs or the Rheem message for the vendor error text.
</div>
` : ''}
</div>
`;
}

@ -7,9 +7,11 @@
# Shared landscape view for Kiosk Satellite and Fully Kiosk tablets.
# -------------------------------------------------------------------
# Related Issue: 1875
# Related Issue: 1895
# Notes: The Kitchen Show is the reference implementation for this shared view.
# Notes: Panel mode removes unused top padding while the inner layout preserves safe side margins.
# Notes: The Kitchen Show uses a fixed dark theme for maximum distance readability.
# Notes: Kiosk Satellite 2026.8.65 imports the HA camera entities used by its native Garage and Front Door overlays, with HLS-first playback enabled on Kitchen Show.
# Notes: Device-specific kiosk controls stay out of the shared dashboard.
######################################################################

@ -9,6 +9,7 @@
# Blog: https://www.vcloudinfo.com/2026/08/home-assistant-internet-speed-monitoring-ookla.html
# -------------------------------------------------------------------
# Related Issue: 1584
# Related Issue: 1890
# Notes: Home dashboard consumes `infra_*` entities for exceptions-only alerts.
# Notes: WAN outages require all four independent ICMP/HTTPS probes to fail continuously for 2 minutes.
# Notes: Continuous latency/loss determine WAN quality; Ookla throughput is a separate twice-daily capacity snapshot and never declares an outage.
@ -27,6 +28,7 @@
# Notes: Garage compute health uses the same 145 F threshold as the existing temperature notification.
# Notes: Immediate website-down states create Repairs; the installed UptimeRobot integration exposes current state, not trend rollups.
# Notes: Dashboard aggregate issue count is live-only; its underlying degraded sensors retain actionable history.
# Notes: Home Water rollup includes Rheem faults/telemetry loss plus active Phyn alerts and valve closure.
######################################################################
input_text:
@ -236,6 +238,7 @@ template:
'binary_sensor.infra_compute_degraded',
'binary_sensor.infra_storage_degraded',
'binary_sensor.infra_external_monitoring_degraded',
'binary_sensor.home_water_problem',
'binary_sensor.kiosk_devices_need_attention'
] %}
{{ expand(categories) | selectattr('state', 'eq', 'on') | list | count }}
@ -247,11 +250,51 @@ template:
'binary_sensor.infra_compute_degraded',
'binary_sensor.infra_storage_degraded',
'binary_sensor.infra_external_monitoring_degraded',
'binary_sensor.home_water_problem',
'binary_sensor.kiosk_devices_need_attention'
] %}
{{ expand(categories) | selectattr('state', 'eq', 'on') | map(attribute='entity_id') | list }}
- binary_sensor:
- name: "Home Water Problem"
unique_id: home_water_problem
device_class: problem
state: >-
{% set phyn_alerts = [
'binary_sensor.garage_phyn_battery_alert',
'binary_sensor.garage_phyn_freeze_warning_alert',
'binary_sensor.garage_phyn_high_pressure_alert',
'binary_sensor.garage_phyn_leak_alert',
'binary_sensor.garage_phyn_offline_leak_shutoff_alert',
'binary_sensor.garage_phyn_pinhole_leak_alert',
'binary_sensor.garage_phyn_recurring_flow_alert',
'binary_sensor.garage_phyn_temperature_alert'
] %}
{{ is_state('binary_sensor.rheem_wh_problem', 'on')
or expand(phyn_alerts) | selectattr('state', 'eq', 'on') | list | count > 0
or states('valve.phyn_shutoff_valve') in ['closed', 'closing'] }}
attributes:
active_entities: >-
{% set monitored = [
'binary_sensor.rheem_wh_problem',
'binary_sensor.garage_phyn_battery_alert',
'binary_sensor.garage_phyn_freeze_warning_alert',
'binary_sensor.garage_phyn_high_pressure_alert',
'binary_sensor.garage_phyn_leak_alert',
'binary_sensor.garage_phyn_offline_leak_shutoff_alert',
'binary_sensor.garage_phyn_pinhole_leak_alert',
'binary_sensor.garage_phyn_recurring_flow_alert',
'binary_sensor.garage_phyn_temperature_alert'
] %}
{% set active = expand(monitored)
| selectattr('state', 'eq', 'on')
| map(attribute='entity_id') | list %}
{% if states('valve.phyn_shutoff_valve') in ['closed', 'closing'] %}
{{ active + ['valve.phyn_shutoff_valve'] }}
{% else %}
{{ active }}
{% endif %}
- name: "Infra WAN Outage"
unique_id: infra_wan_outage
device_class: problem

@ -7,12 +7,14 @@
# Keeps the Bedroom tablet stable and drives state-based Kitchen Show camera views.
# -------------------------------------------------------------------
# Related Issue: 1875
# Related Issue: 1890
# Related Issue: 1895
# Notes: `/dashboard-bedroom/home` remains the canonical desktop/future-hardware route.
# Notes: The Android 5 Fully tablet uses `/local/bedroom-kiosk.html`, a lightweight renderer.
# Notes: Shared camera, header, and alert sensors keep both Bedroom renderers DRY.
# Notes: Fully controls apply only to the legacy Bedroom tablet.
# Notes: Kitchen Show uses Kiosk Satellite discovery entities; no screensaver helper is required.
# Notes: Kiosk Satellite 2026.8.49+ owns HA kiosk-mode hiding and connection recovery; no kiosk-mode custom resource is loaded.
# Notes: Kiosk Satellite 2026.8.65+ owns HA kiosk-mode hiding, connection recovery, HA camera import, and HLS-first playback; no kiosk-mode custom resource is loaded.
# Notes: Kitchen Show stays dark while the house is empty or asleep and wakes only for occupied-house events.
# Notes: Garage takes over while either door is moving/open and remains for three minutes after both close; Front Door takes over while unlocked.
# Notes: At 07:00, Home Assistant stages a pending Kiosk Satellite release, then dispatches Joanna daily until installation is verified.
@ -20,12 +22,13 @@
# Notes: Fully auto-reload on screen-on/screensaver-stop is disabled to avoid motion wake reload loops.
# Notes: Startup recovery waits for HA's initial websocket state burst to settle.
# Notes: Brightness recovery only runs when both SleepIQ in-bed sensors are off.
# Notes: Fully availability/page/app/power plus Kitchen connectivity, last-seen/update/screenshot freshness feed Systems telemetry.
# Notes: Fully availability/page/app/power plus Kitchen connectivity, current-page/screenshot freshness, and update state feed Systems telemetry.
# Notes: Kitchen updates are advisory telemetry and do not raise kiosk or Systems fault rollups.
# Notes: Kiosk attention sensors expose only their stable status attribute so recorder preserves problem transitions without heartbeat churn.
# Notes: Nearby daytime rain or lightning starts a five-minute NOAA radar view; the ambient banner offers daylight replay while the event remains active.
# Notes: Actionable Kitchen banner slides open one shared short-lived detail surface; camera events retain priority.
# Notes: Phyn detail can restore a closed main valve only after an explicit on-screen confirmation.
# Notes: Rheem faults outrank low-hot-water reminders and reuse the hot-water diagnostic detail surface.
# Video: https://youtu.be/ChgEu0IDWzc
######################################################################
@ -426,6 +429,7 @@ template:
state: >-
{% set alerts = state_attr('sensor.nws_alerts_alerts', 'Alerts') | default([], true) %}
{% set hot_water = states('sensor.rheem_wh_available_hot_water') | float(100) %}
{% set rheem_alert_count = states('sensor.rheem_wh_alert_count') | int(0) %}
{% set tomorrow = (now() + timedelta(days=1)).strftime('%Y-%m-%d') %}
{% set battery = states('sensor.spaceship_battery_level') | float(100) %}
{% set ns = namespace(name='', raw='') %}
@ -448,6 +452,8 @@ template:
ENTRY POINT OPEN
{% elif states('group.locks') not in ['locked', 'unknown', 'unavailable'] %}
CHECK THE FRONT DOOR LOCK
{% elif rheem_alert_count > 0 %}
WATER HEATER ALERT - {{ rheem_alert_count }} ACTIVE
{% elif hot_water < 30 %}
HOT WATER IS RUNNING LOW
{% elif now().strftime('%a') in ['Wed', 'Sun']
@ -468,6 +474,7 @@ template:
detail: >-
{% set alerts = state_attr('sensor.nws_alerts_alerts', 'Alerts') | default([], true) %}
{% set hot_water = states('sensor.rheem_wh_available_hot_water') | float(100) %}
{% set rheem_alert_count = states('sensor.rheem_wh_alert_count') | int(0) %}
{% set tomorrow = (now() + timedelta(days=1)).strftime('%Y-%m-%d') %}
{% set battery = states('sensor.spaceship_battery_level') | float(100) %}
{% set ns = namespace(name='', raw='') %}
@ -491,6 +498,10 @@ template:
Check the exterior doors and windows.
{% elif states('group.locks') not in ['locked', 'unknown', 'unavailable'] %}
Lock status is {{ states('group.locks') | replace('_', ' ') }}.
{% elif rheem_alert_count > 0 %}
Rheem reports {{ rheem_alert_count }} active {{ 'alert' if rheem_alert_count == 1 else 'alerts' }}.
Status is {{ states('sensor.rheem_wh_diagnostic_status') | replace('_', ' ') }}.
Check Home Assistant Repairs for the diagnostic snapshot.
{% elif hot_water < 30 %}
{{ hot_water | round(0) }}% is available - keep showers short.
{% elif now().strftime('%a') in ['Wed', 'Sun']
@ -641,7 +652,6 @@ template:
attributes:
status: >-
{% set invalid = ['unknown', 'unavailable', 'none', ''] %}
{% set last_seen = as_timestamp(states('sensor.kitchen_show_last_seen'), 0) %}
{% set screenshot = as_timestamp(states('sensor.kitchen_show_last_screenshot'), 0) %}
{% set page = states('sensor.kitchen_show_current_page') %}
{% set remote_admin = states('sensor.kitchen_show_remote_admin') %}
@ -649,8 +659,6 @@ template:
{% set battery = states('sensor.kitchen_show_battery') | float(0) %}
{% if connectivity != 'on' %}
offline
{% elif last_seen == 0 or (as_timestamp(now()) - last_seen) > 300 %}
telemetry stale
{% elif page in invalid or remote_admin in invalid %}
telemetry unavailable
{% elif '/dashboard-kiosk-satellite-staging/home' not in page %}
@ -857,7 +865,10 @@ script:
or (normalized_type == 'phyn'
and (phyn_alert or states('valve.phyn_shutoff_valve') != 'open'))
or (normalized_type == 'hot_water'
and states('sensor.rheem_wh_available_hot_water') | float(100) < 30)
and (
is_state('binary_sensor.rheem_wh_problem', 'on')
or states('sensor.rheem_wh_available_hot_water') | float(100) < 30
))
) }}
detail_duration: >-
{{ '00:05:00' if normalized_type in ['weather', 'phyn'] else '00:03:00' }}

@ -7,17 +7,350 @@
# Related Issue: 1550
# Related Issue: 1820
# Related Issue: 1890
# Logs hot-water availability alerts to Activity feed; keeps announcements.
# Normalizes EcoNet alerts, telemetry health, Repairs, and diagnostic snapshots.
# -------------------------------------------------------------------
# Docs: https://www.home-assistant.io/integrations/econet/ | Existing notes: Issue #892
# Powerwall outage control for Rheem WH lives in config/packages/powerwall.yaml
# Notes: EcoNet exposes an alert count but not the vendor error code or message.
# Notes: New alert-count increases notify once; state changes and 15-minute reconciliation keep Repairs durable.
# Notes: A 10-minute EcoNet data gap is telemetry stale, not proof of a water-heater fault.
######################################################################
##############################################################################
### Normalized alert and telemetry entities
##############################################################################
template:
- binary_sensor:
- name: "Rheem WH Active Alert"
unique_id: rheem_wh_active_alert
device_class: problem
availability: "{{ is_number(states('sensor.rheem_wh_alert_count')) }}"
state: "{{ states('sensor.rheem_wh_alert_count') | int(0) > 0 }}"
attributes:
alert_count: "{{ states('sensor.rheem_wh_alert_count') | int(0) }}"
source: "econet_counter"
detail_level: "counter_only"
- name: "Rheem WH Telemetry Stale"
unique_id: rheem_wh_telemetry_stale
device_class: problem
delay_on: "00:10:00"
delay_off: "00:01:00"
state: >-
{{ states('water_heater.rheem_wh') in ['unknown', 'unavailable']
or states('sensor.rheem_wh_alert_count') in ['unknown', 'unavailable'] }}
attributes:
evaluation_window: "10 minutes"
monitored_entities: >-
{{ ['water_heater.rheem_wh', 'sensor.rheem_wh_alert_count'] }}
- name: "Rheem WH Problem"
unique_id: rheem_wh_problem
device_class: problem
state: >-
{% set compressor = states('sensor.rheem_wh_compressor_health') %}
{% set tank = states('sensor.rheem_wh_tank_health') %}
{{ is_state('binary_sensor.rheem_wh_active_alert', 'on')
or is_state('binary_sensor.rheem_wh_telemetry_stale', 'on')
or (is_number(compressor) and compressor | float(100) < 90)
or (is_number(tank) and tank | float(100) < 90) }}
attributes:
reasons: >-
{% set compressor = states('sensor.rheem_wh_compressor_health') %}
{% set tank = states('sensor.rheem_wh_tank_health') %}
{% set ns = namespace(items=[]) %}
{% if is_state('binary_sensor.rheem_wh_active_alert', 'on') %}
{% set ns.items = ns.items + ['active_alert'] %}
{% endif %}
{% if is_state('binary_sensor.rheem_wh_telemetry_stale', 'on') %}
{% set ns.items = ns.items + ['telemetry_stale'] %}
{% endif %}
{% if is_number(compressor) and compressor | float(100) < 90 %}
{% set ns.items = ns.items + ['compressor_health'] %}
{% endif %}
{% if is_number(tank) and tank | float(100) < 90 %}
{% set ns.items = ns.items + ['tank_health'] %}
{% endif %}
{{ ns.items }}
sensor:
- name: "Rheem WH Diagnostic Status"
unique_id: rheem_wh_diagnostic_status
icon: mdi:water-boiler-alert
state: >-
{% set alert_count = states('sensor.rheem_wh_alert_count') %}
{% set heater = states('water_heater.rheem_wh') %}
{% set compressor = states('sensor.rheem_wh_compressor_health') %}
{% set tank = states('sensor.rheem_wh_tank_health') %}
{% if is_state('binary_sensor.rheem_wh_telemetry_stale', 'on') %}
telemetry_stale
{% elif alert_count in ['unknown', 'unavailable'] or heater in ['unknown', 'unavailable'] %}
telemetry_pending
{% elif is_state('binary_sensor.rheem_wh_active_alert', 'on') %}
alert
{% elif (is_number(compressor) and compressor | float(100) < 90)
or (is_number(tank) and tank | float(100) < 90) %}
degraded
{% else %}
ok
{% endif %}
attributes:
alert_count: "{{ states('sensor.rheem_wh_alert_count') | int(0) }}"
compressor_health: "{{ states('sensor.rheem_wh_compressor_health') }}"
tank_health: "{{ states('sensor.rheem_wh_tank_health') }}"
active_since: >-
{{ states.binary_sensor.rheem_wh_active_alert.last_changed.isoformat()
if is_state('binary_sensor.rheem_wh_active_alert', 'on') else none }}
last_alert_at: "{{ states('sensor.rheem_wh_last_alert_snapshot') }}"
last_alert_count: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'alert_count') }}
last_alert_operation_mode: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'operation_mode') }}
last_alert_running_state: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'running_state') }}
last_alert_available_hot_water: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'available_hot_water') }}
vendor_error_code: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'vendor_error_code')
| default('not_exposed_by_econet', true) }}
vendor_error_message: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'vendor_error_message')
| default('not_exposed_by_econet', true) }}
- triggers:
- trigger: state
entity_id: sensor.rheem_wh_alert_count
conditions:
- condition: template
value_template: >-
{{ trigger.from_state is not none
and trigger.to_state is not none
and is_number(trigger.from_state.state)
and is_number(trigger.to_state.state)
and trigger.to_state.state | int(0) > trigger.from_state.state | int(0) }}
sensor:
- name: "Rheem WH Last Alert Snapshot"
unique_id: rheem_wh_last_alert_snapshot
device_class: timestamp
icon: mdi:alert-decagram-outline
state: "{{ now().isoformat() }}"
attributes:
source: "econet_counter"
alert_count: "{{ trigger.to_state.state | int(0) }}"
previous_alert_count: "{{ trigger.from_state.state | int(0) }}"
operation_mode: "{{ states('water_heater.rheem_wh') }}"
running_state: "{{ states('sensor.rheem_wh_running_state') }}"
available_hot_water: "{{ states('sensor.rheem_wh_available_hot_water') }}"
compressor_health: "{{ states('sensor.rheem_wh_compressor_health') }}"
tank_health: "{{ states('sensor.rheem_wh_tank_health') }}"
wifi_signal: "{{ states('sensor.rheem_wh_wifi_signal') }}"
vendor_error_code: "not_exposed_by_econet"
vendor_error_message: "not_exposed_by_econet"
##############################################################################
### Automations
##############################################################################
automation:
- alias: "Rheem Water Heater Alert Incident"
id: rheem_water_heater_alert_incident
description: "Notify and dispatch one diagnostic snapshot when the native EcoNet alert count increases"
mode: queued
max: 5
trigger:
- platform: state
entity_id: sensor.rheem_wh_last_alert_snapshot
condition:
- condition: template
value_template: >-
{% set detected = as_timestamp(trigger.to_state.state, 0) %}
{% set age = as_timestamp(now()) - detected %}
{{ detected > 0 and 0 <= age <= 120 }}
action:
- variables:
alert_count: >-
{{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'alert_count') | int(0) }}
snapshot_summary: >-
Alert count {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'alert_count') | int(0) }};
mode {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'operation_mode') | default('unknown', true) }};
running {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'running_state') | default('unknown', true) }};
hot water {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'available_hot_water') | default('unknown', true) }}%;
compressor health {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'compressor_health') | default('unknown', true) }}%;
tank health {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'tank_health') | default('unknown', true) }}%.
- service: script.send_to_logbook
data:
topic: "WATER"
message: "Rheem reported a new active alert. {{ snapshot_summary }}"
- service: script.notify_engine
data:
title: "Rheem water heater alert"
value1: >-
Rheem now reports {{ alert_count }} active {{ 'alert' if alert_count == 1 else 'alerts' }}.
value2: "{{ snapshot_summary }}"
value3: "Home Assistant Repairs contains the durable incident."
who: "parents"
group: "water_heater"
level: "time-sensitive"
- service: script.joanna_dispatch
data:
trigger_context: "HA automation rheem_water_heater_alert_incident (Rheem Water Heater Alert Incident)"
source: "home_assistant_automation.rheem_water_heater_alert_incident"
summary: "Rheem EcoNet reported a new active water-heater alert"
request: >-
Correlate this alert with Home Assistant history and recommend safe next steps.
Do not change the water-heater mode, reset the unit, or dismiss the Repair automatically.
entity_ids:
- sensor.rheem_wh_alert_count
- sensor.rheem_wh_diagnostic_status
- sensor.rheem_wh_last_alert_snapshot
- water_heater.rheem_wh
diagnostics:
alert_count: "{{ alert_count }}"
snapshot: "{{ snapshot_summary }}"
native_error_detail: "counter_only"
- alias: "Rheem Water Heater Incident Reconcile"
id: rheem_water_heater_incident_reconcile
description: "Keep Rheem fault and telemetry-loss Repairs synchronized with normalized telemetry"
mode: restart
trigger:
- platform: time_pattern
minutes: "/15"
seconds: 2
id: periodic
- platform: state
entity_id: sensor.rheem_wh_alert_count
id: alert_count
- platform: state
entity_id:
- sensor.rheem_wh_compressor_health
- sensor.rheem_wh_tank_health
id: health
- platform: state
entity_id: binary_sensor.rheem_wh_telemetry_stale
id: telemetry_state
- platform: state
entity_id: binary_sensor.rheem_wh_problem
id: problem_state
condition:
- condition: template
value_template: "{{ states('binary_sensor.rheem_wh_problem') in ['on', 'off'] }}"
action:
- variables:
alert_count: "{{ states('sensor.rheem_wh_alert_count') | int(0) }}"
diagnostic_status: "{{ states('sensor.rheem_wh_diagnostic_status') }}"
incident_title: >-
{% if is_state('binary_sensor.rheem_wh_active_alert', 'on') %}
Rheem water heater alert
{% elif is_state('binary_sensor.rheem_wh_telemetry_stale', 'on') %}
Rheem telemetry unavailable
{% else %}
Rheem water heater health degraded
{% endif %}
incident_description: |-
Home Assistant detected a Rheem water-heater problem.
Status: {{ states('sensor.rheem_wh_diagnostic_status') }}
Active alert count: {{ states('sensor.rheem_wh_alert_count') }}
Operation mode: {{ states('water_heater.rheem_wh') }}
Running state: {{ states('sensor.rheem_wh_running_state') }}
Available hot water: {{ states('sensor.rheem_wh_available_hot_water') }}%
Compressor health: {{ states('sensor.rheem_wh_compressor_health') }}%
Tank health: {{ states('sensor.rheem_wh_tank_health') }}%
Last new-alert snapshot: {{ states('sensor.rheem_wh_last_alert_snapshot') }}
EcoNet exposes the number of alerts but not the vendor error code or message.
Check the Rheem app or vendor email for the exact diagnostic wording.
- choose:
- conditions:
- condition: template
value_template: >-
{{ trigger.id == 'telemetry_state'
and trigger.from_state is not none
and trigger.to_state is not none
and trigger.from_state.state == 'off'
and trigger.to_state.state == 'on' }}
sequence:
- service: script.send_to_logbook
data:
topic: "WATER"
message: "Rheem EcoNet telemetry has been unavailable for 10 minutes."
- service: script.joanna_dispatch
data:
trigger_context: "HA automation rheem_water_heater_incident_reconcile (telemetry stale)"
source: "home_assistant_automation.rheem_water_heater_incident_reconcile.telemetry_stale"
summary: "Rheem EcoNet telemetry has been unavailable for 10 minutes"
request: >-
Investigate EcoNet connectivity and Home Assistant logs.
Do not reset credentials, change heater mode, or restart Home Assistant automatically.
entity_ids:
- binary_sensor.rheem_wh_telemetry_stale
- sensor.rheem_wh_diagnostic_status
- water_heater.rheem_wh
diagnostics:
status: "{{ diagnostic_status }}"
alert_count: "{{ states('sensor.rheem_wh_alert_count') }}"
- conditions:
- condition: template
value_template: >-
{{ trigger.id == 'telemetry_state'
and trigger.from_state is not none
and trigger.to_state is not none
and trigger.from_state.state == 'on'
and trigger.to_state.state == 'off' }}
sequence:
- service: script.send_to_logbook
data:
topic: "WATER"
message: "Rheem EcoNet telemetry recovered."
- choose:
- conditions:
- condition: state
entity_id: binary_sensor.rheem_wh_problem
state: "on"
sequence:
- service: repairs.create
data:
issue_id: "rheem_water_heater_problem"
domain: "econet"
title: "{{ incident_title }}"
severity: >-
{{ 'warning'
if is_state('binary_sensor.rheem_wh_telemetry_stale', 'on')
and not is_state('binary_sensor.rheem_wh_active_alert', 'on')
else 'error' }}
persistent: true
description: "{{ incident_description }}"
- service: persistent_notification.create
data:
notification_id: "rheem_water_heater_problem"
title: "{{ incident_title }}"
message: "{{ incident_description }}"
default:
- service: repairs.remove
continue_on_error: true
data:
issue_id: "rheem_water_heater_problem"
- service: persistent_notification.dismiss
continue_on_error: true
data:
notification_id: "rheem_water_heater_problem"
- choose:
- conditions:
- condition: template
value_template: >-
{{ trigger.id == 'problem_state'
and trigger.from_state is not none
and trigger.to_state is not none
and trigger.from_state.state == 'on'
and trigger.to_state.state == 'off' }}
sequence:
- service: script.send_to_logbook
data:
topic: "WATER"
message: "Rheem water-heater problem cleared."
# Temporary safeguard for Rheem case CAS-2816630-Z7T2M6 / issue #1890.
# Remove after the evaporator thermistor is replaced and compressor operation
# has been verified. Off remains allowed for Powerwall outage load shedding.
@ -32,6 +365,7 @@ automation:
entity_id: water_heater.rheem_wh
- platform: time_pattern
minutes: "/15"
seconds: 7
condition:
- condition: template
value_template: >-
@ -120,11 +454,18 @@ automation:
# Available Rheem entities snapshot (for reference)
# automation.rheem_water_heater_health_monitoring
# automation.rheem_water_heater_hot_water_availability_alert
# automation.rheem_water_heater_alert_incident
# automation.rheem_water_heater_incident_reconcile
# binary_sensor.rheem_wh_active_alert
# binary_sensor.rheem_wh_problem
# binary_sensor.rheem_wh_running
# binary_sensor.rheem_wh_shutoff_valve
# binary_sensor.rheem_wh_telemetry_stale
# sensor.rheem_wh_alert_count
# sensor.rheem_wh_available_hot_water
# sensor.rheem_wh_compressor_health
# sensor.rheem_wh_diagnostic_status
# sensor.rheem_wh_last_alert_snapshot
# sensor.rheem_wh_override_status
# sensor.rheem_wh_power_usage_today
# sensor.rheem_wh_running_state

Loading…
Cancel
Save

Powered by TurnKey Linux.