diff --git a/config/dashboards/README.md b/config/dashboards/README.md
index 56251cd6..0c76cbfe 100644
--- a/config/dashboards/README.md
+++ b/config/dashboards/README.md
@@ -66,6 +66,8 @@ This folder holds YAML-managed Home Assistant Lovelace dashboards and UI resourc
The displays share only the reusable event and screen-policy state they need. Kitchen keeps its clock/current-weather/forecast banner and rotating household context, including the next confirmed cruise countdown, while the fixed-landscape Bedroom dashboard omits the redundant clock and uses that space for the next wake alarm, security/weather context, larger Front Lawn and Driveway feeds, and a readable household alert. Both use the same Garage-then-Front-Door event priority, with Garage held for three minutes after both doors close before the default dashboard returns. The canonical Bedroom Lovelace view and its Android 5 lightweight renderer consume the same camera, header, and alert sensors; the renderer bypasses only the unsupported Home Assistant frontend on the frozen Fire WebView. Kitchen uses native Kiosk Satellite camera overlays and idle dimming; Home Assistant handles only household sleep/away enforcement, volume, and event-camera wake instead of periodically forcing the screen on. Nearby rain or lightning starts one five-minute NOAA radar takeover during daylight; afterward, the rotating Storms Approaching banner can replay the latest 20-minute radar loop while the weather event remains active. Actionable NWS, package, family-location, entry-point, Phyn, and low-hot-water slides open a shared short-lived detail surface; the family map centers only the person named by the tapped slide and shows that person's prior 24-hour trail, while a closed Phyn main valve can be restored only from its detail view after explicit confirmation. The ambient wall remains in place after sunset. True idle panel-off remains disabled until the Crown LineageOS device has a reliable motion-wake input. Its device schedule changes the Home Assistant theme between light at 07:00 and dark at 19:00. Other clients follow their own system preference.
+Kitchen's native Kiosk Satellite overlays use the imported Home Assistant camera entities, with HLS preferred over WebRTC on the Fire/WebView-class Kitchen Show display.
+
### How it is wired into Home Assistant
This folder is referenced from `config/configuration.yaml` via:
- `lovelace.resource_mode: yaml`
diff --git a/config/dashboards/infrastructure/partials/home_sections.yaml b/config/dashboards/infrastructure/partials/home_sections.yaml
index dbe23776..a254c986 100644
--- a/config/dashboards/infrastructure/partials/home_sections.yaml
+++ b/config/dashboards/infrastructure/partials/home_sections.yaml
@@ -6,12 +6,14 @@
# Systems Partial - operations summary
# House-system health strip, active issues, and datacenter status.
# -------------------------------------------------------------------
+# Related Issue: 1890
# Notes: The health ribbon mirrors the visible dashboard navigation order and labels.
# Notes: DNS and external-monitoring faults roll up under Network instead of duplicating it.
# Notes: Network trend panels live on Network so Overview stays focused on broad house status.
# Notes: Power & Solar shows realtime flow; accumulated history remains in Energy.
# Notes: Scheduled Proxmox maintenance and sustained WAN quality/reset warnings render amber; critical conditions remain red.
# Notes: Active Issue rows enumerate faults, scheduled maintenance, and reset urgency so drill-down is optional for initial triage.
+# Notes: Home Water and Systems surface normalized Rheem faults; telemetry-only loss renders amber.
# Notes: Back to Overview is the first control in the landing-view navigation strip.
######################################################################
@@ -59,22 +61,31 @@
raw_suffix: ACTIVE
warning_entity_ids:
- binary_sensor.infra_wan_sustained_degradation
+ - binary_sensor.rheem_wh_telemetry_stale
critical_entity_ids:
- binary_sensor.infra_wan_critical
- binary_sensor.infra_dns_pihole_degraded
- binary_sensor.infra_compute_degraded
- binary_sensor.infra_storage_degraded
- binary_sensor.infra_external_monitoring_degraded
+ - binary_sensor.rheem_wh_active_alert
+ - binary_sensor.garage_phyn_leak_alert
- type: custom:button-card
template: bearstone_infra_status_kpi
- entity: binary_sensor.garage_phyn_leak_alert
+ entity: binary_sensor.home_water_problem
name: Home Water
icon: mdi:shield-water-outline
variables:
ok_state: 'off'
healthy_text: CLEAR
- alert_text: LEAK
+ warning_text: TELEMETRY
+ alert_text: CHECK
+ critical_entity_ids:
+ - binary_sensor.rheem_wh_active_alert
+ - binary_sensor.garage_phyn_leak_alert
+ warning_entity_ids:
+ - binary_sensor.rheem_wh_telemetry_stale
tap_action:
action: navigate
navigation_path: /dashboard-infrastructure/home-water
diff --git a/config/dashboards/infrastructure/partials/home_water_sections.yaml b/config/dashboards/infrastructure/partials/home_water_sections.yaml
index 140317e2..0df3f83e 100644
--- a/config/dashboards/infrastructure/partials/home_water_sections.yaml
+++ b/config/dashboards/infrastructure/partials/home_water_sections.yaml
@@ -6,9 +6,11 @@
# Systems Partial - Home Water
# Protection, live use, hot water, maintenance, outdoor water, and trends.
# -------------------------------------------------------------------
+# Related Issue: 1890
# Notes: NAS, NVR, and unrelated house-temperature cards are omitted; refrigerator temperature stays with home safety.
# Notes: Maintenance rows reuse existing reset scripts through safe more-info flows.
# Notes: Active Phyn leak alerts are shown; the integration's stale latest-test leak flag is not an operator alert.
+# Notes: Rheem alert, health, and telemetry faults render as an exception row backed by durable Repairs.
# Notes: Daily usage uses change on the same sum-only statistic configured in Energy.
# Notes: The overview ribbon prioritizes the next maintenance action and frequent controls without hidden grid placeholders.
# Notes: Refrigerator temperature remains a temporary Home Maintenance overview item until a better permanent view is chosen.
@@ -451,6 +453,30 @@
template: bearstone_infra_panel_header
name: Hot Water System
+ - type: custom:button-card
+ template: bearstone_infra_alert_row
+ entity: binary_sensor.rheem_wh_problem
+ name: Rheem Needs Attention
+ icon: mdi:water-boiler-alert
+ variables:
+ alert_kind: binary_on
+ critical_entity_ids:
+ - binary_sensor.rheem_wh_active_alert
+ warning_entity_ids:
+ - binary_sensor.rheem_wh_telemetry_stale
+ exception_detail: >
+ [[[
+ const status = states['sensor.rheem_wh_diagnostic_status']?.state ?? 'unknown';
+ const count = states['sensor.rheem_wh_alert_count']?.state ?? 'unknown';
+ return `Status: ${String(status).replaceAll('_', ' ')} · Active alerts: ${count}`;
+ ]]]
+
+ - type: custom:button-card
+ template: bearstone_infra_list_row
+ entity: sensor.rheem_wh_diagnostic_status
+ name: Diagnostic Status
+ icon: mdi:stethoscope
+
- type: custom:button-card
template: bearstone_infra_list_row
entity: sensor.rheem_wh_available_hot_water
@@ -485,6 +511,12 @@
name: Active Alerts
icon: mdi:alert-circle-outline
+ - type: custom:button-card
+ template: bearstone_infra_list_row
+ entity: sensor.rheem_wh_last_alert_snapshot
+ name: Last New Alert
+ icon: mdi:alert-decagram-outline
+
- type: custom:button-card
template: bearstone_infra_list_row
entity: water_heater.rheem_wh
diff --git a/config/dashboards/infrastructure/partials/kiosk_sections.yaml b/config/dashboards/infrastructure/partials/kiosk_sections.yaml
index 8c2d30a4..6e1f2235 100644
--- a/config/dashboards/infrastructure/partials/kiosk_sections.yaml
+++ b/config/dashboards/infrastructure/partials/kiosk_sections.yaml
@@ -61,7 +61,11 @@
warning_text: UPDATE AVAILABLE
alert_text: NEEDS ATTENTION
state_display: >
- [[[ return String(entity?.attributes?.status ?? entity?.state ?? 'unknown').toUpperCase(); ]]]
+ [[[
+ const updateAvailable = states['update.kitchen_show_update']?.state === 'on';
+ if (entity?.state === 'off') return updateAvailable ? 'UPDATE AVAILABLE' : 'ONLINE';
+ return String(entity?.attributes?.status ?? entity?.state ?? 'unknown').toUpperCase();
+ ]]]
tap_action:
action: navigate
navigation_path: /dashboard-kiosk-satellite-staging/home
diff --git a/config/dashboards/kiosk_satellite_staging/dashboard.yaml b/config/dashboards/kiosk_satellite_staging/dashboard.yaml
index 834ac6e8..9c397e98 100644
--- a/config/dashboards/kiosk_satellite_staging/dashboard.yaml
+++ b/config/dashboards/kiosk_satellite_staging/dashboard.yaml
@@ -6,8 +6,10 @@
# Kiosk Satellite Staging Dashboard - Shared tablet camera surface
# Landscape-first Home Assistant dashboard for Kiosk Satellite devices.
# -------------------------------------------------------------------
+# Related Issue: 1895
# Notes: Hidden preview dashboard; the production Bedroom kiosk remains unchanged.
# Notes: Contains no tablet controls; Kiosk Satellite handles native camera overlays.
+# Notes: Kitchen Show uses imported Home Assistant cameras with HLS preferred over WebRTC for Fire/WebView playback.
######################################################################
title: Kiosk Satellite Preview
diff --git a/config/dashboards/kiosk_satellite_staging/partials/home_sections.yaml b/config/dashboards/kiosk_satellite_staging/partials/home_sections.yaml
index 4fe84ef0..82cdf3a1 100644
--- a/config/dashboards/kiosk_satellite_staging/partials/home_sections.yaml
+++ b/config/dashboards/kiosk_satellite_staging/partials/home_sections.yaml
@@ -6,13 +6,17 @@
# Kiosk Satellite Partial - Ambient kitchen display
# Enlarged camera feeds plus rotating household reminders, cruise countdown, and locations.
# -------------------------------------------------------------------
+# Related Issue: 1890
+# Related Issue: 1895
# Notes: Three-row landscape layout uses full-width clock and alert banners around the camera row.
# Notes: Camera cards use automatic streaming to limit idle tablet load.
# Notes: Native Garage and Front Door views take over for their matching live states.
+# Notes: Kitchen Show Kiosk Satellite imports the HA camera sources and prefers HLS for native camera playback on Fire/WebView displays.
# Notes: Nearby rain or lightning starts a five-minute NOAA radar view only while the sun is above the horizon.
# Notes: After radar returns to the ambient wall, Storms Approaching offers another five-minute replay from the lower banner.
# Notes: Actionable banner slides open one shared full-screen detail surface and return automatically to the ambient wall.
# Notes: Family detail centers only the selected person and includes the prior 24-hour trail; Phyn detail includes a confirmed main-valve restore action.
+# Notes: Rheem problem telemetry adds a red/amber water-heater slide and enriches the existing hot-water detail.
# Notes: The large-format lower panel otherwise mirrors read-only household fact entities.
# Notes: The clock uses oversized time text and places live conditions beneath the current-weather icon.
######################################################################
@@ -184,6 +188,11 @@
- group.locks
- binary_sensor.front_door_packages_present
- sensor.rheem_wh_available_hot_water
+ - sensor.rheem_wh_alert_count
+ - sensor.rheem_wh_diagnostic_status
+ - binary_sensor.rheem_wh_problem
+ - binary_sensor.rheem_wh_active_alert
+ - binary_sensor.rheem_wh_telemetry_stale
- binary_sensor.rheem_wh_running
- sensor.rheem_wh_tank_health
- sensor.rheem_wh_compressor_health
@@ -426,8 +435,31 @@
});
}
+ const rheemAlertCount = Number.parseInt(state('sensor.rheem_wh_alert_count'), 10);
+ const rheemStatus = state('sensor.rheem_wh_diagnostic_status');
+ const rheemProblem = state('binary_sensor.rheem_wh_problem') === 'on';
+ if (rheemProblem) {
+ const activeAlert = state('binary_sensor.rheem_wh_active_alert') === 'on';
+ const telemetryStale = state('binary_sensor.rheem_wh_telemetry_stale') === 'on';
+ items.push({
+ kicker: telemetryStale && !activeAlert ? 'WATER HEATER TELEMETRY' : 'WATER HEATER ALERT',
+ title: activeAlert && Number.isFinite(rheemAlertCount)
+ ? `${rheemAlertCount} active ${rheemAlertCount === 1 ? 'alert' : 'alerts'}`
+ : `Rheem status: ${pretty(rheemStatus)}`,
+ detail: telemetryStale
+ ? 'EcoNet data has been unavailable for 10 minutes · Tap for diagnostics'
+ : 'Home Assistant Repairs has the diagnostic snapshot · Tap for details',
+ icon: 'mdi:water-boiler-alert',
+ accent: telemetryStale && !activeAlert ? '#ef6c00' : '#c62828',
+ action: {
+ service: 'kitchen_kiosk_show_detail',
+ data: {detail_type: 'hot_water'}
+ }
+ });
+ }
+
const hotWater = Number.parseFloat(state('sensor.rheem_wh_available_hot_water'));
- if (Number.isFinite(hotWater) && hotWater < 30) {
+ if (!rheemProblem && Number.isFinite(hotWater) && hotWater < 30) {
items.push({
kicker: 'HOT WATER',
title: 'Hot water is running low',
@@ -706,15 +738,20 @@
`;
} else if (detailType === 'hot_water') {
const available = Number.parseFloat(state('sensor.rheem_wh_available_hot_water'));
+ const alertCount = Number.parseInt(state('sensor.rheem_wh_alert_count'), 10);
+ const diagnosticStatus = state('sensor.rheem_wh_diagnostic_status');
+ const rheemProblem = state('binary_sensor.rheem_wh_problem') === 'on';
const heater = states['water_heater.rheem_wh'];
const running = state('binary_sensor.rheem_wh_running') === 'on';
const target = Number.parseFloat(heater?.attributes?.temperature);
const mode = pretty(heater?.attributes?.operation_mode || heater?.state);
const tankHealth = Number.parseFloat(state('sensor.rheem_wh_tank_health'));
const compressorHealth = Number.parseFloat(state('sensor.rheem_wh_compressor_health'));
- kicker = 'HOT WATER RECOVERY';
- title = running ? 'Heating now' : 'Standing by';
- icon = 'mdi:water-boiler';
+ kicker = rheemProblem ? 'WATER HEATER ALERT' : 'HOT WATER RECOVERY';
+ title = rheemProblem && Number.isFinite(alertCount) && alertCount > 0
+ ? `${alertCount} active ${alertCount === 1 ? 'alert' : 'alerts'}`
+ : (running ? 'Heating now' : 'Standing by');
+ icon = rheemProblem ? 'mdi:water-boiler-alert' : 'mdi:water-boiler';
body = html`
${Number.isFinite(available) ? Math.round(available) : '--'}%
@@ -725,6 +762,11 @@
TANK HEALTH${Number.isFinite(tankHealth) ? `${Math.round(tankHealth)}%` : 'Unknown'}
COMPRESSOR${Number.isFinite(compressorHealth) ? `${Math.round(compressorHealth)}%` : 'Unknown'}
+ ${rheemProblem ? html`
+
+ STATUS: ${pretty(diagnosticStatus)} · ACTIVE ALERTS: ${Number.isFinite(alertCount) ? alertCount : 'Unknown'} · Check Repairs or the Rheem message for the vendor error text.
+
+ ` : ''}
`;
}
diff --git a/config/dashboards/kiosk_satellite_staging/views/01_home.yaml b/config/dashboards/kiosk_satellite_staging/views/01_home.yaml
index 7a7100c4..a4c57c41 100644
--- a/config/dashboards/kiosk_satellite_staging/views/01_home.yaml
+++ b/config/dashboards/kiosk_satellite_staging/views/01_home.yaml
@@ -7,9 +7,11 @@
# Shared landscape view for Kiosk Satellite and Fully Kiosk tablets.
# -------------------------------------------------------------------
# Related Issue: 1875
+# Related Issue: 1895
# Notes: The Kitchen Show is the reference implementation for this shared view.
# Notes: Panel mode removes unused top padding while the inner layout preserves safe side margins.
# Notes: The Kitchen Show uses a fixed dark theme for maximum distance readability.
+# Notes: Kiosk Satellite 2026.8.65 imports the HA camera entities used by its native Garage and Front Door overlays, with HLS-first playback enabled on Kitchen Show.
# Notes: Device-specific kiosk controls stay out of the shared dashboard.
######################################################################
diff --git a/config/packages/infrastructure.yaml b/config/packages/infrastructure.yaml
index 059df3ef..a4b1dfcc 100644
--- a/config/packages/infrastructure.yaml
+++ b/config/packages/infrastructure.yaml
@@ -9,6 +9,7 @@
# Blog: https://www.vcloudinfo.com/2026/08/home-assistant-internet-speed-monitoring-ookla.html
# -------------------------------------------------------------------
# Related Issue: 1584
+# Related Issue: 1890
# Notes: Home dashboard consumes `infra_*` entities for exceptions-only alerts.
# Notes: WAN outages require all four independent ICMP/HTTPS probes to fail continuously for 2 minutes.
# Notes: Continuous latency/loss determine WAN quality; Ookla throughput is a separate twice-daily capacity snapshot and never declares an outage.
@@ -27,6 +28,7 @@
# Notes: Garage compute health uses the same 145 F threshold as the existing temperature notification.
# Notes: Immediate website-down states create Repairs; the installed UptimeRobot integration exposes current state, not trend rollups.
# Notes: Dashboard aggregate issue count is live-only; its underlying degraded sensors retain actionable history.
+# Notes: Home Water rollup includes Rheem faults/telemetry loss plus active Phyn alerts and valve closure.
######################################################################
input_text:
@@ -236,6 +238,7 @@ template:
'binary_sensor.infra_compute_degraded',
'binary_sensor.infra_storage_degraded',
'binary_sensor.infra_external_monitoring_degraded',
+ 'binary_sensor.home_water_problem',
'binary_sensor.kiosk_devices_need_attention'
] %}
{{ expand(categories) | selectattr('state', 'eq', 'on') | list | count }}
@@ -247,11 +250,51 @@ template:
'binary_sensor.infra_compute_degraded',
'binary_sensor.infra_storage_degraded',
'binary_sensor.infra_external_monitoring_degraded',
+ 'binary_sensor.home_water_problem',
'binary_sensor.kiosk_devices_need_attention'
] %}
{{ expand(categories) | selectattr('state', 'eq', 'on') | map(attribute='entity_id') | list }}
- binary_sensor:
+ - name: "Home Water Problem"
+ unique_id: home_water_problem
+ device_class: problem
+ state: >-
+ {% set phyn_alerts = [
+ 'binary_sensor.garage_phyn_battery_alert',
+ 'binary_sensor.garage_phyn_freeze_warning_alert',
+ 'binary_sensor.garage_phyn_high_pressure_alert',
+ 'binary_sensor.garage_phyn_leak_alert',
+ 'binary_sensor.garage_phyn_offline_leak_shutoff_alert',
+ 'binary_sensor.garage_phyn_pinhole_leak_alert',
+ 'binary_sensor.garage_phyn_recurring_flow_alert',
+ 'binary_sensor.garage_phyn_temperature_alert'
+ ] %}
+ {{ is_state('binary_sensor.rheem_wh_problem', 'on')
+ or expand(phyn_alerts) | selectattr('state', 'eq', 'on') | list | count > 0
+ or states('valve.phyn_shutoff_valve') in ['closed', 'closing'] }}
+ attributes:
+ active_entities: >-
+ {% set monitored = [
+ 'binary_sensor.rheem_wh_problem',
+ 'binary_sensor.garage_phyn_battery_alert',
+ 'binary_sensor.garage_phyn_freeze_warning_alert',
+ 'binary_sensor.garage_phyn_high_pressure_alert',
+ 'binary_sensor.garage_phyn_leak_alert',
+ 'binary_sensor.garage_phyn_offline_leak_shutoff_alert',
+ 'binary_sensor.garage_phyn_pinhole_leak_alert',
+ 'binary_sensor.garage_phyn_recurring_flow_alert',
+ 'binary_sensor.garage_phyn_temperature_alert'
+ ] %}
+ {% set active = expand(monitored)
+ | selectattr('state', 'eq', 'on')
+ | map(attribute='entity_id') | list %}
+ {% if states('valve.phyn_shutoff_valve') in ['closed', 'closing'] %}
+ {{ active + ['valve.phyn_shutoff_valve'] }}
+ {% else %}
+ {{ active }}
+ {% endif %}
+
- name: "Infra WAN Outage"
unique_id: infra_wan_outage
device_class: problem
diff --git a/config/packages/kiosk_tablet.yaml b/config/packages/kiosk_tablet.yaml
index ad01da72..b8633e59 100644
--- a/config/packages/kiosk_tablet.yaml
+++ b/config/packages/kiosk_tablet.yaml
@@ -7,12 +7,14 @@
# Keeps the Bedroom tablet stable and drives state-based Kitchen Show camera views.
# -------------------------------------------------------------------
# Related Issue: 1875
+# Related Issue: 1890
+# Related Issue: 1895
# Notes: `/dashboard-bedroom/home` remains the canonical desktop/future-hardware route.
# Notes: The Android 5 Fully tablet uses `/local/bedroom-kiosk.html`, a lightweight renderer.
# Notes: Shared camera, header, and alert sensors keep both Bedroom renderers DRY.
# Notes: Fully controls apply only to the legacy Bedroom tablet.
# Notes: Kitchen Show uses Kiosk Satellite discovery entities; no screensaver helper is required.
-# Notes: Kiosk Satellite 2026.8.49+ owns HA kiosk-mode hiding and connection recovery; no kiosk-mode custom resource is loaded.
+# Notes: Kiosk Satellite 2026.8.65+ owns HA kiosk-mode hiding, connection recovery, HA camera import, and HLS-first playback; no kiosk-mode custom resource is loaded.
# Notes: Kitchen Show stays dark while the house is empty or asleep and wakes only for occupied-house events.
# Notes: Garage takes over while either door is moving/open and remains for three minutes after both close; Front Door takes over while unlocked.
# Notes: At 07:00, Home Assistant stages a pending Kiosk Satellite release, then dispatches Joanna daily until installation is verified.
@@ -20,12 +22,13 @@
# Notes: Fully auto-reload on screen-on/screensaver-stop is disabled to avoid motion wake reload loops.
# Notes: Startup recovery waits for HA's initial websocket state burst to settle.
# Notes: Brightness recovery only runs when both SleepIQ in-bed sensors are off.
-# Notes: Fully availability/page/app/power plus Kitchen connectivity, last-seen/update/screenshot freshness feed Systems telemetry.
+# Notes: Fully availability/page/app/power plus Kitchen connectivity, current-page/screenshot freshness, and update state feed Systems telemetry.
# Notes: Kitchen updates are advisory telemetry and do not raise kiosk or Systems fault rollups.
# Notes: Kiosk attention sensors expose only their stable status attribute so recorder preserves problem transitions without heartbeat churn.
# Notes: Nearby daytime rain or lightning starts a five-minute NOAA radar view; the ambient banner offers daylight replay while the event remains active.
# Notes: Actionable Kitchen banner slides open one shared short-lived detail surface; camera events retain priority.
# Notes: Phyn detail can restore a closed main valve only after an explicit on-screen confirmation.
+# Notes: Rheem faults outrank low-hot-water reminders and reuse the hot-water diagnostic detail surface.
# Video: https://youtu.be/ChgEu0IDWzc
######################################################################
@@ -426,6 +429,7 @@ template:
state: >-
{% set alerts = state_attr('sensor.nws_alerts_alerts', 'Alerts') | default([], true) %}
{% set hot_water = states('sensor.rheem_wh_available_hot_water') | float(100) %}
+ {% set rheem_alert_count = states('sensor.rheem_wh_alert_count') | int(0) %}
{% set tomorrow = (now() + timedelta(days=1)).strftime('%Y-%m-%d') %}
{% set battery = states('sensor.spaceship_battery_level') | float(100) %}
{% set ns = namespace(name='', raw='') %}
@@ -448,6 +452,8 @@ template:
ENTRY POINT OPEN
{% elif states('group.locks') not in ['locked', 'unknown', 'unavailable'] %}
CHECK THE FRONT DOOR LOCK
+ {% elif rheem_alert_count > 0 %}
+ WATER HEATER ALERT - {{ rheem_alert_count }} ACTIVE
{% elif hot_water < 30 %}
HOT WATER IS RUNNING LOW
{% elif now().strftime('%a') in ['Wed', 'Sun']
@@ -468,6 +474,7 @@ template:
detail: >-
{% set alerts = state_attr('sensor.nws_alerts_alerts', 'Alerts') | default([], true) %}
{% set hot_water = states('sensor.rheem_wh_available_hot_water') | float(100) %}
+ {% set rheem_alert_count = states('sensor.rheem_wh_alert_count') | int(0) %}
{% set tomorrow = (now() + timedelta(days=1)).strftime('%Y-%m-%d') %}
{% set battery = states('sensor.spaceship_battery_level') | float(100) %}
{% set ns = namespace(name='', raw='') %}
@@ -491,6 +498,10 @@ template:
Check the exterior doors and windows.
{% elif states('group.locks') not in ['locked', 'unknown', 'unavailable'] %}
Lock status is {{ states('group.locks') | replace('_', ' ') }}.
+ {% elif rheem_alert_count > 0 %}
+ Rheem reports {{ rheem_alert_count }} active {{ 'alert' if rheem_alert_count == 1 else 'alerts' }}.
+ Status is {{ states('sensor.rheem_wh_diagnostic_status') | replace('_', ' ') }}.
+ Check Home Assistant Repairs for the diagnostic snapshot.
{% elif hot_water < 30 %}
{{ hot_water | round(0) }}% is available - keep showers short.
{% elif now().strftime('%a') in ['Wed', 'Sun']
@@ -641,7 +652,6 @@ template:
attributes:
status: >-
{% set invalid = ['unknown', 'unavailable', 'none', ''] %}
- {% set last_seen = as_timestamp(states('sensor.kitchen_show_last_seen'), 0) %}
{% set screenshot = as_timestamp(states('sensor.kitchen_show_last_screenshot'), 0) %}
{% set page = states('sensor.kitchen_show_current_page') %}
{% set remote_admin = states('sensor.kitchen_show_remote_admin') %}
@@ -649,8 +659,6 @@ template:
{% set battery = states('sensor.kitchen_show_battery') | float(0) %}
{% if connectivity != 'on' %}
offline
- {% elif last_seen == 0 or (as_timestamp(now()) - last_seen) > 300 %}
- telemetry stale
{% elif page in invalid or remote_admin in invalid %}
telemetry unavailable
{% elif '/dashboard-kiosk-satellite-staging/home' not in page %}
@@ -857,7 +865,10 @@ script:
or (normalized_type == 'phyn'
and (phyn_alert or states('valve.phyn_shutoff_valve') != 'open'))
or (normalized_type == 'hot_water'
- and states('sensor.rheem_wh_available_hot_water') | float(100) < 30)
+ and (
+ is_state('binary_sensor.rheem_wh_problem', 'on')
+ or states('sensor.rheem_wh_available_hot_water') | float(100) < 30
+ ))
) }}
detail_duration: >-
{{ '00:05:00' if normalized_type in ['weather', 'phyn'] else '00:03:00' }}
diff --git a/config/packages/rheem_econet.yaml b/config/packages/rheem_econet.yaml
index a9150fd9..8d3e361b 100755
--- a/config/packages/rheem_econet.yaml
+++ b/config/packages/rheem_econet.yaml
@@ -7,17 +7,350 @@
# Related Issue: 1550
# Related Issue: 1820
# Related Issue: 1890
-# Logs hot-water availability alerts to Activity feed; keeps announcements.
+# Normalizes EcoNet alerts, telemetry health, Repairs, and diagnostic snapshots.
# -------------------------------------------------------------------
# Docs: https://www.home-assistant.io/integrations/econet/ | Existing notes: Issue #892
# Powerwall outage control for Rheem WH lives in config/packages/powerwall.yaml
+# Notes: EcoNet exposes an alert count but not the vendor error code or message.
+# Notes: New alert-count increases notify once; state changes and 15-minute reconciliation keep Repairs durable.
+# Notes: A 10-minute EcoNet data gap is telemetry stale, not proof of a water-heater fault.
######################################################################
+##############################################################################
+### Normalized alert and telemetry entities
+##############################################################################
+
+template:
+ - binary_sensor:
+ - name: "Rheem WH Active Alert"
+ unique_id: rheem_wh_active_alert
+ device_class: problem
+ availability: "{{ is_number(states('sensor.rheem_wh_alert_count')) }}"
+ state: "{{ states('sensor.rheem_wh_alert_count') | int(0) > 0 }}"
+ attributes:
+ alert_count: "{{ states('sensor.rheem_wh_alert_count') | int(0) }}"
+ source: "econet_counter"
+ detail_level: "counter_only"
+
+ - name: "Rheem WH Telemetry Stale"
+ unique_id: rheem_wh_telemetry_stale
+ device_class: problem
+ delay_on: "00:10:00"
+ delay_off: "00:01:00"
+ state: >-
+ {{ states('water_heater.rheem_wh') in ['unknown', 'unavailable']
+ or states('sensor.rheem_wh_alert_count') in ['unknown', 'unavailable'] }}
+ attributes:
+ evaluation_window: "10 minutes"
+ monitored_entities: >-
+ {{ ['water_heater.rheem_wh', 'sensor.rheem_wh_alert_count'] }}
+
+ - name: "Rheem WH Problem"
+ unique_id: rheem_wh_problem
+ device_class: problem
+ state: >-
+ {% set compressor = states('sensor.rheem_wh_compressor_health') %}
+ {% set tank = states('sensor.rheem_wh_tank_health') %}
+ {{ is_state('binary_sensor.rheem_wh_active_alert', 'on')
+ or is_state('binary_sensor.rheem_wh_telemetry_stale', 'on')
+ or (is_number(compressor) and compressor | float(100) < 90)
+ or (is_number(tank) and tank | float(100) < 90) }}
+ attributes:
+ reasons: >-
+ {% set compressor = states('sensor.rheem_wh_compressor_health') %}
+ {% set tank = states('sensor.rheem_wh_tank_health') %}
+ {% set ns = namespace(items=[]) %}
+ {% if is_state('binary_sensor.rheem_wh_active_alert', 'on') %}
+ {% set ns.items = ns.items + ['active_alert'] %}
+ {% endif %}
+ {% if is_state('binary_sensor.rheem_wh_telemetry_stale', 'on') %}
+ {% set ns.items = ns.items + ['telemetry_stale'] %}
+ {% endif %}
+ {% if is_number(compressor) and compressor | float(100) < 90 %}
+ {% set ns.items = ns.items + ['compressor_health'] %}
+ {% endif %}
+ {% if is_number(tank) and tank | float(100) < 90 %}
+ {% set ns.items = ns.items + ['tank_health'] %}
+ {% endif %}
+ {{ ns.items }}
+
+ sensor:
+ - name: "Rheem WH Diagnostic Status"
+ unique_id: rheem_wh_diagnostic_status
+ icon: mdi:water-boiler-alert
+ state: >-
+ {% set alert_count = states('sensor.rheem_wh_alert_count') %}
+ {% set heater = states('water_heater.rheem_wh') %}
+ {% set compressor = states('sensor.rheem_wh_compressor_health') %}
+ {% set tank = states('sensor.rheem_wh_tank_health') %}
+ {% if is_state('binary_sensor.rheem_wh_telemetry_stale', 'on') %}
+ telemetry_stale
+ {% elif alert_count in ['unknown', 'unavailable'] or heater in ['unknown', 'unavailable'] %}
+ telemetry_pending
+ {% elif is_state('binary_sensor.rheem_wh_active_alert', 'on') %}
+ alert
+ {% elif (is_number(compressor) and compressor | float(100) < 90)
+ or (is_number(tank) and tank | float(100) < 90) %}
+ degraded
+ {% else %}
+ ok
+ {% endif %}
+ attributes:
+ alert_count: "{{ states('sensor.rheem_wh_alert_count') | int(0) }}"
+ compressor_health: "{{ states('sensor.rheem_wh_compressor_health') }}"
+ tank_health: "{{ states('sensor.rheem_wh_tank_health') }}"
+ active_since: >-
+ {{ states.binary_sensor.rheem_wh_active_alert.last_changed.isoformat()
+ if is_state('binary_sensor.rheem_wh_active_alert', 'on') else none }}
+ last_alert_at: "{{ states('sensor.rheem_wh_last_alert_snapshot') }}"
+ last_alert_count: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'alert_count') }}
+ last_alert_operation_mode: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'operation_mode') }}
+ last_alert_running_state: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'running_state') }}
+ last_alert_available_hot_water: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'available_hot_water') }}
+ vendor_error_code: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'vendor_error_code')
+ | default('not_exposed_by_econet', true) }}
+ vendor_error_message: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'vendor_error_message')
+ | default('not_exposed_by_econet', true) }}
+
+ - triggers:
+ - trigger: state
+ entity_id: sensor.rheem_wh_alert_count
+ conditions:
+ - condition: template
+ value_template: >-
+ {{ trigger.from_state is not none
+ and trigger.to_state is not none
+ and is_number(trigger.from_state.state)
+ and is_number(trigger.to_state.state)
+ and trigger.to_state.state | int(0) > trigger.from_state.state | int(0) }}
+ sensor:
+ - name: "Rheem WH Last Alert Snapshot"
+ unique_id: rheem_wh_last_alert_snapshot
+ device_class: timestamp
+ icon: mdi:alert-decagram-outline
+ state: "{{ now().isoformat() }}"
+ attributes:
+ source: "econet_counter"
+ alert_count: "{{ trigger.to_state.state | int(0) }}"
+ previous_alert_count: "{{ trigger.from_state.state | int(0) }}"
+ operation_mode: "{{ states('water_heater.rheem_wh') }}"
+ running_state: "{{ states('sensor.rheem_wh_running_state') }}"
+ available_hot_water: "{{ states('sensor.rheem_wh_available_hot_water') }}"
+ compressor_health: "{{ states('sensor.rheem_wh_compressor_health') }}"
+ tank_health: "{{ states('sensor.rheem_wh_tank_health') }}"
+ wifi_signal: "{{ states('sensor.rheem_wh_wifi_signal') }}"
+ vendor_error_code: "not_exposed_by_econet"
+ vendor_error_message: "not_exposed_by_econet"
+
##############################################################################
### Automations
##############################################################################
automation:
+ - alias: "Rheem Water Heater Alert Incident"
+ id: rheem_water_heater_alert_incident
+ description: "Notify and dispatch one diagnostic snapshot when the native EcoNet alert count increases"
+ mode: queued
+ max: 5
+ trigger:
+ - platform: state
+ entity_id: sensor.rheem_wh_last_alert_snapshot
+ condition:
+ - condition: template
+ value_template: >-
+ {% set detected = as_timestamp(trigger.to_state.state, 0) %}
+ {% set age = as_timestamp(now()) - detected %}
+ {{ detected > 0 and 0 <= age <= 120 }}
+ action:
+ - variables:
+ alert_count: >-
+ {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'alert_count') | int(0) }}
+ snapshot_summary: >-
+ Alert count {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'alert_count') | int(0) }};
+ mode {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'operation_mode') | default('unknown', true) }};
+ running {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'running_state') | default('unknown', true) }};
+ hot water {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'available_hot_water') | default('unknown', true) }}%;
+ compressor health {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'compressor_health') | default('unknown', true) }}%;
+ tank health {{ state_attr('sensor.rheem_wh_last_alert_snapshot', 'tank_health') | default('unknown', true) }}%.
+ - service: script.send_to_logbook
+ data:
+ topic: "WATER"
+ message: "Rheem reported a new active alert. {{ snapshot_summary }}"
+ - service: script.notify_engine
+ data:
+ title: "Rheem water heater alert"
+ value1: >-
+ Rheem now reports {{ alert_count }} active {{ 'alert' if alert_count == 1 else 'alerts' }}.
+ value2: "{{ snapshot_summary }}"
+ value3: "Home Assistant Repairs contains the durable incident."
+ who: "parents"
+ group: "water_heater"
+ level: "time-sensitive"
+ - service: script.joanna_dispatch
+ data:
+ trigger_context: "HA automation rheem_water_heater_alert_incident (Rheem Water Heater Alert Incident)"
+ source: "home_assistant_automation.rheem_water_heater_alert_incident"
+ summary: "Rheem EcoNet reported a new active water-heater alert"
+ request: >-
+ Correlate this alert with Home Assistant history and recommend safe next steps.
+ Do not change the water-heater mode, reset the unit, or dismiss the Repair automatically.
+ entity_ids:
+ - sensor.rheem_wh_alert_count
+ - sensor.rheem_wh_diagnostic_status
+ - sensor.rheem_wh_last_alert_snapshot
+ - water_heater.rheem_wh
+ diagnostics:
+ alert_count: "{{ alert_count }}"
+ snapshot: "{{ snapshot_summary }}"
+ native_error_detail: "counter_only"
+
+ - alias: "Rheem Water Heater Incident Reconcile"
+ id: rheem_water_heater_incident_reconcile
+ description: "Keep Rheem fault and telemetry-loss Repairs synchronized with normalized telemetry"
+ mode: restart
+ trigger:
+ - platform: time_pattern
+ minutes: "/15"
+ seconds: 2
+ id: periodic
+ - platform: state
+ entity_id: sensor.rheem_wh_alert_count
+ id: alert_count
+ - platform: state
+ entity_id:
+ - sensor.rheem_wh_compressor_health
+ - sensor.rheem_wh_tank_health
+ id: health
+ - platform: state
+ entity_id: binary_sensor.rheem_wh_telemetry_stale
+ id: telemetry_state
+ - platform: state
+ entity_id: binary_sensor.rheem_wh_problem
+ id: problem_state
+ condition:
+ - condition: template
+ value_template: "{{ states('binary_sensor.rheem_wh_problem') in ['on', 'off'] }}"
+ action:
+ - variables:
+ alert_count: "{{ states('sensor.rheem_wh_alert_count') | int(0) }}"
+ diagnostic_status: "{{ states('sensor.rheem_wh_diagnostic_status') }}"
+ incident_title: >-
+ {% if is_state('binary_sensor.rheem_wh_active_alert', 'on') %}
+ Rheem water heater alert
+ {% elif is_state('binary_sensor.rheem_wh_telemetry_stale', 'on') %}
+ Rheem telemetry unavailable
+ {% else %}
+ Rheem water heater health degraded
+ {% endif %}
+ incident_description: |-
+ Home Assistant detected a Rheem water-heater problem.
+
+ Status: {{ states('sensor.rheem_wh_diagnostic_status') }}
+ Active alert count: {{ states('sensor.rheem_wh_alert_count') }}
+ Operation mode: {{ states('water_heater.rheem_wh') }}
+ Running state: {{ states('sensor.rheem_wh_running_state') }}
+ Available hot water: {{ states('sensor.rheem_wh_available_hot_water') }}%
+ Compressor health: {{ states('sensor.rheem_wh_compressor_health') }}%
+ Tank health: {{ states('sensor.rheem_wh_tank_health') }}%
+ Last new-alert snapshot: {{ states('sensor.rheem_wh_last_alert_snapshot') }}
+
+ EcoNet exposes the number of alerts but not the vendor error code or message.
+ Check the Rheem app or vendor email for the exact diagnostic wording.
+ - choose:
+ - conditions:
+ - condition: template
+ value_template: >-
+ {{ trigger.id == 'telemetry_state'
+ and trigger.from_state is not none
+ and trigger.to_state is not none
+ and trigger.from_state.state == 'off'
+ and trigger.to_state.state == 'on' }}
+ sequence:
+ - service: script.send_to_logbook
+ data:
+ topic: "WATER"
+ message: "Rheem EcoNet telemetry has been unavailable for 10 minutes."
+ - service: script.joanna_dispatch
+ data:
+ trigger_context: "HA automation rheem_water_heater_incident_reconcile (telemetry stale)"
+ source: "home_assistant_automation.rheem_water_heater_incident_reconcile.telemetry_stale"
+ summary: "Rheem EcoNet telemetry has been unavailable for 10 minutes"
+ request: >-
+ Investigate EcoNet connectivity and Home Assistant logs.
+ Do not reset credentials, change heater mode, or restart Home Assistant automatically.
+ entity_ids:
+ - binary_sensor.rheem_wh_telemetry_stale
+ - sensor.rheem_wh_diagnostic_status
+ - water_heater.rheem_wh
+ diagnostics:
+ status: "{{ diagnostic_status }}"
+ alert_count: "{{ states('sensor.rheem_wh_alert_count') }}"
+ - conditions:
+ - condition: template
+ value_template: >-
+ {{ trigger.id == 'telemetry_state'
+ and trigger.from_state is not none
+ and trigger.to_state is not none
+ and trigger.from_state.state == 'on'
+ and trigger.to_state.state == 'off' }}
+ sequence:
+ - service: script.send_to_logbook
+ data:
+ topic: "WATER"
+ message: "Rheem EcoNet telemetry recovered."
+ - choose:
+ - conditions:
+ - condition: state
+ entity_id: binary_sensor.rheem_wh_problem
+ state: "on"
+ sequence:
+ - service: repairs.create
+ data:
+ issue_id: "rheem_water_heater_problem"
+ domain: "econet"
+ title: "{{ incident_title }}"
+ severity: >-
+ {{ 'warning'
+ if is_state('binary_sensor.rheem_wh_telemetry_stale', 'on')
+ and not is_state('binary_sensor.rheem_wh_active_alert', 'on')
+ else 'error' }}
+ persistent: true
+ description: "{{ incident_description }}"
+ - service: persistent_notification.create
+ data:
+ notification_id: "rheem_water_heater_problem"
+ title: "{{ incident_title }}"
+ message: "{{ incident_description }}"
+ default:
+ - service: repairs.remove
+ continue_on_error: true
+ data:
+ issue_id: "rheem_water_heater_problem"
+ - service: persistent_notification.dismiss
+ continue_on_error: true
+ data:
+ notification_id: "rheem_water_heater_problem"
+ - choose:
+ - conditions:
+ - condition: template
+ value_template: >-
+ {{ trigger.id == 'problem_state'
+ and trigger.from_state is not none
+ and trigger.to_state is not none
+ and trigger.from_state.state == 'on'
+ and trigger.to_state.state == 'off' }}
+ sequence:
+ - service: script.send_to_logbook
+ data:
+ topic: "WATER"
+ message: "Rheem water-heater problem cleared."
+
# Temporary safeguard for Rheem case CAS-2816630-Z7T2M6 / issue #1890.
# Remove after the evaporator thermistor is replaced and compressor operation
# has been verified. Off remains allowed for Powerwall outage load shedding.
@@ -32,6 +365,7 @@ automation:
entity_id: water_heater.rheem_wh
- platform: time_pattern
minutes: "/15"
+ seconds: 7
condition:
- condition: template
value_template: >-
@@ -120,11 +454,18 @@ automation:
# Available Rheem entities snapshot (for reference)
# automation.rheem_water_heater_health_monitoring
# automation.rheem_water_heater_hot_water_availability_alert
+# automation.rheem_water_heater_alert_incident
+# automation.rheem_water_heater_incident_reconcile
+# binary_sensor.rheem_wh_active_alert
+# binary_sensor.rheem_wh_problem
# binary_sensor.rheem_wh_running
# binary_sensor.rheem_wh_shutoff_valve
+# binary_sensor.rheem_wh_telemetry_stale
# sensor.rheem_wh_alert_count
# sensor.rheem_wh_available_hot_water
# sensor.rheem_wh_compressor_health
+# sensor.rheem_wh_diagnostic_status
+# sensor.rheem_wh_last_alert_snapshot
# sensor.rheem_wh_override_status
# sensor.rheem_wh_power_usage_today
# sensor.rheem_wh_running_state