Removed old dstarrepeater_1.example and added dstarrepeater.example with all default values and dstarrepeater_guide.txt with documented descriptions of every configuration setting.pull/15/head
Andy Taylor
5 months ago
parent
fd7f1a181c
commit
5578b6b86c
@ -0,0 +1,529 @@
|
|||||||
|
================================================================================
|
||||||
|
DStarRepeater Configuration Reference Guide
|
||||||
|
================================================================================
|
||||||
|
|
||||||
|
WARNING: DO NOT use this file as your configuration file.
|
||||||
|
This file is a reference guide only. The comment lines in this file will
|
||||||
|
cause the DStarRepeater config parser to skip the line immediately following
|
||||||
|
each comment (due to a known bug in the parser). If you need a clean starting
|
||||||
|
config, copy 'dstarrepeater.example' to '/etc/dstarrepeater' instead.
|
||||||
|
|
||||||
|
Config file location: /etc/dstarrepeater
|
||||||
|
(or /etc/dstarrepeater_<name> when using the -name command line option)
|
||||||
|
|
||||||
|
Format: key=value (one per line, no spaces around the '=')
|
||||||
|
Boolean values: 0 = off/false, 1 = on/true
|
||||||
|
|
||||||
|
================================================================================
|
||||||
|
|
||||||
|
|
||||||
|
--- CALLSIGN SETTINGS ---------------------------------------------------------
|
||||||
|
|
||||||
|
# The repeater callsign, padded to 8 characters.
|
||||||
|
# 7-character base callsign + 1-character module suffix (A, B, C, D, or E).
|
||||||
|
# Example: "GB3IN C" (note the two spaces padding to 7 chars, then suffix)
|
||||||
|
callsign=GB3IN C
|
||||||
|
|
||||||
|
# The gateway callsign, padded to 8 characters.
|
||||||
|
# 7-character base callsign + "G" suffix. Leave empty if not linked to a gateway.
|
||||||
|
# Example: "GB3IN G"
|
||||||
|
gateway=
|
||||||
|
|
||||||
|
# Operating mode of the repeater.
|
||||||
|
# 0 = Duplex Full duplex repeater (simultaneous TX and RX)
|
||||||
|
# 1 = Simplex Simplex repeater
|
||||||
|
# 2 = Gateway Gateway mode (ack forced off, RPT1 validation forced on)
|
||||||
|
# 3 = TX Only Transmit only (ack forced off)
|
||||||
|
# 4 = RX Only Receive only (ack forced off)
|
||||||
|
# 5 = TX and RX Sequential transmit then receive
|
||||||
|
mode=0
|
||||||
|
|
||||||
|
# Acknowledgement type sent after a transmission is received.
|
||||||
|
# 0 = Off No acknowledgement
|
||||||
|
# 1 = BER Respond with Bit Error Rate
|
||||||
|
# 2 = Status Respond with status message
|
||||||
|
# Note: Forced to 0 (Off) in Gateway, TX Only, RX Only, and TX and RX modes.
|
||||||
|
ack=1
|
||||||
|
|
||||||
|
# Restrict access to callsigns in the whitelist only.
|
||||||
|
# 0 = Off No restriction, all callsigns accepted
|
||||||
|
# 1 = On Only whitelisted callsigns accepted
|
||||||
|
restriction=0
|
||||||
|
|
||||||
|
# Validate that the RPT1 field in incoming headers matches this repeater.
|
||||||
|
# 0 = Off Accept all incoming headers
|
||||||
|
# 1 = On Only accept headers addressed to this repeater
|
||||||
|
# Note: Forced to 1 (On) in Gateway mode.
|
||||||
|
rpt1Validation=1
|
||||||
|
|
||||||
|
# Blank (mute) DTMF tones from the audio stream.
|
||||||
|
# 0 = Off DTMF tones pass through to the audio
|
||||||
|
# 1 = On DTMF tones are blanked from the audio
|
||||||
|
dtmfBlanking=1
|
||||||
|
|
||||||
|
# Send an error reply when an invalid or unrecognised command is received.
|
||||||
|
# 0 = Off Silently ignore invalid commands
|
||||||
|
# 1 = On Reply with an error message
|
||||||
|
errorReply=1
|
||||||
|
|
||||||
|
|
||||||
|
--- NETWORK SETTINGS ----------------------------------------------------------
|
||||||
|
|
||||||
|
# IP address of the ircDDB Gateway.
|
||||||
|
gatewayAddress=127.0.0.1
|
||||||
|
|
||||||
|
# UDP port number the gateway is listening on.
|
||||||
|
gatewayPort=20010
|
||||||
|
|
||||||
|
# Local IP address to bind to for gateway communication.
|
||||||
|
localAddress=127.0.0.1
|
||||||
|
|
||||||
|
# Local UDP port number for gateway communication.
|
||||||
|
localPort=20011
|
||||||
|
|
||||||
|
# Network name identifier (used when running multiple repeaters).
|
||||||
|
# Leave empty for a single repeater setup.
|
||||||
|
networkName=
|
||||||
|
|
||||||
|
|
||||||
|
--- MODEM TYPE ----------------------------------------------------------------
|
||||||
|
|
||||||
|
# The type of modem hardware connected to this repeater.
|
||||||
|
# Must be one of the following strings (case-sensitive):
|
||||||
|
# DVAP
|
||||||
|
# DVMEGA
|
||||||
|
# DV-RPTR V1
|
||||||
|
# DV-RPTR V2
|
||||||
|
# DV-RPTR V3
|
||||||
|
# GMSK Modem
|
||||||
|
# MMDVM
|
||||||
|
# Sound Card
|
||||||
|
# Split
|
||||||
|
# Icom Access Point/Terminal Mode
|
||||||
|
# Only the settings for the selected modem type need to be configured.
|
||||||
|
modemType=DVAP
|
||||||
|
|
||||||
|
|
||||||
|
--- TIMING SETTINGS -----------------------------------------------------------
|
||||||
|
|
||||||
|
# Transmission timeout in seconds. The repeater will drop a transmission
|
||||||
|
# that exceeds this duration. Set to 0 to disable the timeout.
|
||||||
|
timeout=180
|
||||||
|
|
||||||
|
# Acknowledgement delay time in milliseconds.
|
||||||
|
# Time to wait before sending the ack after a transmission ends.
|
||||||
|
ackTime=500
|
||||||
|
|
||||||
|
|
||||||
|
--- BEACON SETTINGS -----------------------------------------------------------
|
||||||
|
|
||||||
|
# Beacon interval in seconds. The repeater will transmit a beacon at this
|
||||||
|
# interval. Set to 0 to disable beaconing.
|
||||||
|
beaconTime=600
|
||||||
|
|
||||||
|
# Text transmitted in the beacon slow data field.
|
||||||
|
beaconText=D-Star Repeater
|
||||||
|
|
||||||
|
# Enable voice beacon (transmit an audio beacon in addition to data).
|
||||||
|
# 0 = Off Data-only beacon
|
||||||
|
# 1 = On Voice and data beacon
|
||||||
|
beaconVoice=0
|
||||||
|
|
||||||
|
# Language for the voice beacon text-to-speech.
|
||||||
|
# 0 = English (UK)
|
||||||
|
# 1 = Deutsch
|
||||||
|
# 2 = Dansk
|
||||||
|
# 3 = Francais
|
||||||
|
# 4 = Italiano
|
||||||
|
# 5 = Polski
|
||||||
|
# 6 = Espanol
|
||||||
|
# 7 = Svenska
|
||||||
|
# 8 = Nederlands
|
||||||
|
# 9 = English (US)
|
||||||
|
# 10 = Norsk
|
||||||
|
language=0
|
||||||
|
|
||||||
|
|
||||||
|
--- ANNOUNCEMENT SETTINGS -----------------------------------------------------
|
||||||
|
|
||||||
|
# Enable the announcement/recording feature.
|
||||||
|
# 0 = Off
|
||||||
|
# 1 = On
|
||||||
|
announcementEnabled=0
|
||||||
|
|
||||||
|
# Announcement playback interval in milliseconds.
|
||||||
|
announcementTime=500
|
||||||
|
|
||||||
|
# RPT1 callsign that triggers recording an announcement.
|
||||||
|
announcementRecordRPT1=
|
||||||
|
|
||||||
|
# RPT2 callsign that triggers recording an announcement.
|
||||||
|
announcementRecordRPT2=
|
||||||
|
|
||||||
|
# RPT1 callsign that triggers deleting a recorded announcement.
|
||||||
|
announcementDeleteRPT1=
|
||||||
|
|
||||||
|
# RPT2 callsign that triggers deleting a recorded announcement.
|
||||||
|
announcementDeleteRPT2=
|
||||||
|
|
||||||
|
|
||||||
|
--- DTMF CONTROL SETTINGS ----------------------------------------------------
|
||||||
|
|
||||||
|
# Enable DTMF remote control of the repeater.
|
||||||
|
# 0 = Off
|
||||||
|
# 1 = On
|
||||||
|
controlEnabled=0
|
||||||
|
|
||||||
|
# RPT1 callsign required for DTMF control commands to be accepted.
|
||||||
|
controlRPT1=
|
||||||
|
|
||||||
|
# RPT2 callsign required for DTMF control commands to be accepted.
|
||||||
|
controlRPT2=
|
||||||
|
|
||||||
|
# DTMF sequence to remotely shut down the repeater.
|
||||||
|
controlShutdown=
|
||||||
|
|
||||||
|
# DTMF sequence to remotely start up the repeater.
|
||||||
|
controlStartup=
|
||||||
|
|
||||||
|
# DTMF sequences that trigger status message 1-5 to be sent.
|
||||||
|
controlStatus1=
|
||||||
|
controlStatus2=
|
||||||
|
controlStatus3=
|
||||||
|
controlStatus4=
|
||||||
|
controlStatus5=
|
||||||
|
|
||||||
|
# DTMF command sequences 1-6 and their associated shell command lines.
|
||||||
|
# When the DTMF sequence is received, the corresponding command line is executed.
|
||||||
|
controlCommand1=
|
||||||
|
controlCommand1Line=
|
||||||
|
controlCommand2=
|
||||||
|
controlCommand2Line=
|
||||||
|
controlCommand3=
|
||||||
|
controlCommand3Line=
|
||||||
|
controlCommand4=
|
||||||
|
controlCommand4Line=
|
||||||
|
controlCommand5=
|
||||||
|
controlCommand5Line=
|
||||||
|
controlCommand6=
|
||||||
|
controlCommand6Line=
|
||||||
|
|
||||||
|
# DTMF sequences that toggle external output relays 1-4.
|
||||||
|
controlOutput1=
|
||||||
|
controlOutput2=
|
||||||
|
controlOutput3=
|
||||||
|
controlOutput4=
|
||||||
|
|
||||||
|
|
||||||
|
--- EXTERNAL CONTROLLER SETTINGS ----------------------------------------------
|
||||||
|
|
||||||
|
# The type of external hardware controller for PTT, LEDs, and relay outputs.
|
||||||
|
# Leave empty for no external controller. Examples of valid values:
|
||||||
|
# (empty) No controller
|
||||||
|
# GPIO Raspberry Pi GPIO pins (Pi builds only)
|
||||||
|
# UDRC UDRC board (Pi builds only)
|
||||||
|
# Velleman K8055 - 0 Velleman K8055 USB board at address 0 (0-3)
|
||||||
|
# URI USB - 1 URI USB relay card at address 1 (1-6)
|
||||||
|
# Serial - /dev/ttyUSB0 Serial port controller
|
||||||
|
# Arduino - /dev/ttyUSB0 Arduino controller via serial
|
||||||
|
controllerType=
|
||||||
|
|
||||||
|
# Hardware config selection (1-5). Selects between different pin/output
|
||||||
|
# mappings on the external controller.
|
||||||
|
serialConfig=1
|
||||||
|
|
||||||
|
# Invert the PTT output signal.
|
||||||
|
# 0 = Off PTT active high
|
||||||
|
# 1 = On PTT active low (inverted)
|
||||||
|
pttInvert=0
|
||||||
|
|
||||||
|
# Active hang time in seconds. How long the controller stays in the
|
||||||
|
# active (transmitting) state after the last transmission ends.
|
||||||
|
# Range: 0-300. Set to 0 to disable.
|
||||||
|
activeHangTime=0
|
||||||
|
|
||||||
|
|
||||||
|
--- OUTPUT RELAY DEFAULTS -----------------------------------------------------
|
||||||
|
|
||||||
|
# Default state of external output relays 1-4 at startup.
|
||||||
|
# 0 = Off
|
||||||
|
# 1 = On
|
||||||
|
output1=0
|
||||||
|
output2=0
|
||||||
|
output3=0
|
||||||
|
output4=0
|
||||||
|
|
||||||
|
|
||||||
|
--- LOGGING -------------------------------------------------------------------
|
||||||
|
|
||||||
|
# Enable logging to file.
|
||||||
|
# 0 = Off
|
||||||
|
# 1 = On
|
||||||
|
logging=0
|
||||||
|
|
||||||
|
|
||||||
|
--- WINDOW POSITION (GUI only) -----------------------------------------------
|
||||||
|
|
||||||
|
# Window position for the GUI version. Set to -1 for system default placement.
|
||||||
|
windowX=-1
|
||||||
|
windowY=-1
|
||||||
|
|
||||||
|
|
||||||
|
================================================================================
|
||||||
|
MODEM-SPECIFIC SETTINGS
|
||||||
|
Only the section for your selected modemType needs to be configured.
|
||||||
|
================================================================================
|
||||||
|
|
||||||
|
|
||||||
|
--- DVAP MODEM SETTINGS -------------------------------------------------------
|
||||||
|
--- (modemType=DVAP)
|
||||||
|
|
||||||
|
# Serial port the DVAP is connected to.
|
||||||
|
# Example: /dev/ttyUSB0
|
||||||
|
dvapPort=
|
||||||
|
|
||||||
|
# Operating frequency in Hz.
|
||||||
|
# Example: 145500000 = 145.500 MHz, 438500000 = 438.500 MHz
|
||||||
|
dvapFrequency=145500000
|
||||||
|
|
||||||
|
# Transmit power in dBm. Range depends on DVAP hardware.
|
||||||
|
dvapPower=10
|
||||||
|
|
||||||
|
# Squelch level in dBm. Signals below this level are ignored.
|
||||||
|
dvapSquelch=-100
|
||||||
|
|
||||||
|
|
||||||
|
--- GMSK MODEM SETTINGS -------------------------------------------------------
|
||||||
|
--- (modemType=GMSK Modem)
|
||||||
|
|
||||||
|
# USB address of the GMSK modem (decimal). Default is 768 (0x0300 hex).
|
||||||
|
# Note: On Linux, always uses libusb. On Windows, interface type is set
|
||||||
|
# separately in the Windows registry.
|
||||||
|
gmskAddress=768
|
||||||
|
|
||||||
|
|
||||||
|
--- DV-RPTR V1 MODEM SETTINGS -------------------------------------------------
|
||||||
|
--- (modemType=DV-RPTR V1)
|
||||||
|
|
||||||
|
# Serial port the DV-RPTR V1 is connected to.
|
||||||
|
# Example: /dev/ttyUSB0
|
||||||
|
dvrptr1Port=
|
||||||
|
|
||||||
|
# Invert the received signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
dvrptr1RXInvert=0
|
||||||
|
|
||||||
|
# Invert the transmitted signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
dvrptr1TXInvert=0
|
||||||
|
|
||||||
|
# Channel selection.
|
||||||
|
# 0 = Channel A
|
||||||
|
# 1 = Channel B
|
||||||
|
dvrptr1Channel=0
|
||||||
|
|
||||||
|
# Modulation level as a percentage (0-100).
|
||||||
|
dvrptr1ModLevel=20
|
||||||
|
|
||||||
|
# Transmit delay in milliseconds. Delay before data is sent after keying TX.
|
||||||
|
dvrptr1TXDelay=150
|
||||||
|
|
||||||
|
|
||||||
|
--- DV-RPTR V2 MODEM SETTINGS -------------------------------------------------
|
||||||
|
--- (modemType=DV-RPTR V2)
|
||||||
|
|
||||||
|
# Connection type to the DV-RPTR V2.
|
||||||
|
# 0 = USB Connect via USB serial port
|
||||||
|
# 1 = Network Connect via TCP/IP network
|
||||||
|
dvrptr2Connection=0
|
||||||
|
|
||||||
|
# USB serial port (when dvrptr2Connection=0).
|
||||||
|
# Example: /dev/ttyUSB0
|
||||||
|
dvrptr2USBPort=
|
||||||
|
|
||||||
|
# Network address (when dvrptr2Connection=1).
|
||||||
|
dvrptr2Address=127.0.0.1
|
||||||
|
|
||||||
|
# Network port (when dvrptr2Connection=1).
|
||||||
|
dvrptr2Port=0
|
||||||
|
|
||||||
|
# Invert the transmitted signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
dvrptr2TXInvert=0
|
||||||
|
|
||||||
|
# Modulation level as a percentage (0-100).
|
||||||
|
dvrptr2ModLevel=20
|
||||||
|
|
||||||
|
# Transmit delay in milliseconds.
|
||||||
|
dvrptr2TXDelay=150
|
||||||
|
|
||||||
|
|
||||||
|
--- DV-RPTR V3 MODEM SETTINGS -------------------------------------------------
|
||||||
|
--- (modemType=DV-RPTR V3)
|
||||||
|
|
||||||
|
# Connection type to the DV-RPTR V3.
|
||||||
|
# 0 = USB Connect via USB serial port
|
||||||
|
# 1 = Network Connect via TCP/IP network
|
||||||
|
dvrptr3Connection=0
|
||||||
|
|
||||||
|
# USB serial port (when dvrptr3Connection=0).
|
||||||
|
# Example: /dev/ttyUSB0
|
||||||
|
dvrptr3USBPort=
|
||||||
|
|
||||||
|
# Network address (when dvrptr3Connection=1).
|
||||||
|
dvrptr3Address=127.0.0.1
|
||||||
|
|
||||||
|
# Network port (when dvrptr3Connection=1).
|
||||||
|
dvrptr3Port=0
|
||||||
|
|
||||||
|
# Invert the transmitted signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
dvrptr3TXInvert=0
|
||||||
|
|
||||||
|
# Modulation level as a percentage (0-100).
|
||||||
|
dvrptr3ModLevel=20
|
||||||
|
|
||||||
|
# Transmit delay in milliseconds.
|
||||||
|
dvrptr3TXDelay=150
|
||||||
|
|
||||||
|
|
||||||
|
--- DVMEGA MODEM SETTINGS -----------------------------------------------------
|
||||||
|
--- (modemType=DVMEGA)
|
||||||
|
|
||||||
|
# Serial port the DVMEGA is connected to.
|
||||||
|
# Example: /dev/ttyAMA0 (Raspberry Pi), /dev/ttyUSB0
|
||||||
|
dvmegaPort=
|
||||||
|
|
||||||
|
# DVMEGA hardware variant.
|
||||||
|
# 0 = Modem Basic DVMEGA modem board
|
||||||
|
# 1 = Radio 2m DVMEGA with 2m (VHF) radio module
|
||||||
|
# 2 = Radio 70cm DVMEGA with 70cm (UHF) radio module
|
||||||
|
# 3 = Radio 2m/70cm DVMEGA with dual-band radio module
|
||||||
|
dvmegaVariant=0
|
||||||
|
|
||||||
|
# Invert the received signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
dvmegaRXInvert=0
|
||||||
|
|
||||||
|
# Invert the transmitted signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
dvmegaTXInvert=0
|
||||||
|
|
||||||
|
# Transmit delay in milliseconds.
|
||||||
|
dvmegaTXDelay=150
|
||||||
|
|
||||||
|
# Receive frequency in Hz (for radio variants).
|
||||||
|
# Example: 145500000 = 145.500 MHz
|
||||||
|
dvmegaRXFrequency=145500000
|
||||||
|
|
||||||
|
# Transmit frequency in Hz (for radio variants).
|
||||||
|
# Example: 145500000 = 145.500 MHz
|
||||||
|
dvmegaTXFrequency=145500000
|
||||||
|
|
||||||
|
# Transmit power as a percentage (0-100, for radio variants).
|
||||||
|
dvmegaPower=100
|
||||||
|
|
||||||
|
|
||||||
|
--- MMDVM MODEM SETTINGS ------------------------------------------------------
|
||||||
|
--- (modemType=MMDVM)
|
||||||
|
|
||||||
|
# Serial port the MMDVM is connected to.
|
||||||
|
# Example: /dev/ttyACM0, /dev/ttyUSB0
|
||||||
|
mmdvmPort=
|
||||||
|
|
||||||
|
# Invert the received signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
mmdvmRXInvert=0
|
||||||
|
|
||||||
|
# Invert the transmitted signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
mmdvmTXInvert=0
|
||||||
|
|
||||||
|
# Invert the PTT signal to the MMDVM.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
mmdvmPTTInvert=0
|
||||||
|
|
||||||
|
# Transmit delay in milliseconds.
|
||||||
|
mmdvmTXDelay=50
|
||||||
|
|
||||||
|
# Receive audio level as a percentage (0-100).
|
||||||
|
mmdvmRXLevel=100
|
||||||
|
|
||||||
|
# Transmit audio level as a percentage (0-100).
|
||||||
|
mmdvmTXLevel=100
|
||||||
|
|
||||||
|
|
||||||
|
--- SOUND CARD MODEM SETTINGS -------------------------------------------------
|
||||||
|
--- (modemType=Sound Card)
|
||||||
|
|
||||||
|
# Sound card device name for receiving audio.
|
||||||
|
# Use the device name as reported by your audio system.
|
||||||
|
soundCardRXDevice=
|
||||||
|
|
||||||
|
# Sound card device name for transmitting audio.
|
||||||
|
soundCardTXDevice=
|
||||||
|
|
||||||
|
# Invert the received signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
soundCardRXInvert=0
|
||||||
|
|
||||||
|
# Invert the transmitted signal polarity.
|
||||||
|
# 0 = Normal
|
||||||
|
# 1 = Inverted
|
||||||
|
soundCardTXInvert=0
|
||||||
|
|
||||||
|
# Receive audio level multiplier (floating point, e.g. 1.0000 = unity gain).
|
||||||
|
soundCardRXLevel=1.0000
|
||||||
|
|
||||||
|
# Transmit audio level multiplier (floating point, e.g. 1.0000 = unity gain).
|
||||||
|
soundCardTXLevel=1.0000
|
||||||
|
|
||||||
|
# Transmit delay in milliseconds. Delay before audio data is sent.
|
||||||
|
soundCardTXDelay=150
|
||||||
|
|
||||||
|
# Transmit tail in milliseconds. Extra carrier time after the last audio frame.
|
||||||
|
soundCardTXTail=50
|
||||||
|
|
||||||
|
|
||||||
|
--- ICOM ACCESS POINT/TERMINAL MODE SETTINGS ----------------------------------
|
||||||
|
--- (modemType=Icom Access Point/Terminal Mode)
|
||||||
|
|
||||||
|
# Serial port the Icom radio is connected to.
|
||||||
|
# Example: /dev/ttyUSB0
|
||||||
|
icomPort=
|
||||||
|
|
||||||
|
|
||||||
|
--- SPLIT MODEM SETTINGS ------------------------------------------------------
|
||||||
|
--- (modemType=Split)
|
||||||
|
|
||||||
|
# Local IP address to bind for split receiver/transmitter communication.
|
||||||
|
splitLocalAddress=
|
||||||
|
|
||||||
|
# Local UDP port for split communication.
|
||||||
|
splitLocalPort=0
|
||||||
|
|
||||||
|
# Split transmitter and receiver names are stored as indexed entries:
|
||||||
|
# splitTXName0=<transmitter 0 name>
|
||||||
|
# splitTXName1=<transmitter 1 name>
|
||||||
|
# splitRXName0=<receiver 0 name>
|
||||||
|
# splitRXName1=<receiver 1 name>
|
||||||
|
# ... (up to 5 transmitters and 25 receivers)
|
||||||
|
# No entries are present by default.
|
||||||
|
|
||||||
|
# Split timeout in seconds. Set to 0 to disable.
|
||||||
|
splitTimeout=0
|
||||||
|
|
||||||
|
|
||||||
|
================================================================================
|
||||||
|
END OF CONFIGURATION REFERENCE
|
||||||
|
================================================================================
|
||||||
Loading…
Reference in new issue