CubeSatSim/hardware/v1.1/README.md

Here is information about the CubeSatSim v1.1 hardware

NOTE: The change between v1.0 and v1.1 is changing the BPF to a LPF. Only the SMD components change - all the rest are identical

NOTE: The STEM Payload Board has a 1.1a version. The only change is a cutout on the edge of the PCB to increase clearance for the Pi Camera. Otherwsie, it is identical to the 1.1 version.

There are files for the main board, battery board, and STEM payload board of these types:

• cubesatsim-main-1.1_gerbers.zip -- All gerber files used to fabricate PCBs

• cubesatsim-main-1.1_schematic.pdf -- Schematic

• cubesatsim-main-1.1_pcb.png -- View of board

• cubesatsim-main-1.1_board_fill.png -- View of board with fill

• cubesatsim-main-1.1_topPCB.png -- Top view of PCB generated by gerbers

• cubesatsim-main-1.1_bottomPCB.png -- Bottom view of PCB generated by gerbers

• cubesatsim-main-1.1_tNames.pdf -- Top outline of components

• cubesatsim-main-1.1_bNames.pdf -- Bottom outline of components

• cubesatsim-main-1.1.mnt -- top SMD component placement data

• cubesatsim-main-1.0.mnb -- bottom SMD component placement data

• cubesatsim-main-1.0_bom.csv.txt -- Bill of Materials in CSV format

I use PCBWay to fabricate PCBs https://pcbway.com

Board sets are available on the AMSAT Store: https://www.amsat.org/product/amsat-cubesatsim-pcb/

Bill of materials https://CubeSatSim.org/bom

Instructions https://CubeSatSim.org/wiki