Updated with rough instructions on how to use AX-RadioLAB to generate new radio configurations

ax5043/README.md

@@ -11,6 +11,20 @@ The AX5043 library provides an interface to program the transceiver. The library
 - Encoding: HDLC with FEC
 - Error Detection: CRC-16
 
-## Next Steps
+## To Modify These Settings
 
-Over time, the AX5043 library will have new functions to change these settings.
+The configuration files for the AX5043 are generated by software.  To change them, you will need to download
+- AX8052-IDE SOFTWARE PACKAGE (WINDOWS INSTALLER)
+- AX-RADIOLAB (WINDOWS INSTALLER)
+They are available here https://m.onsemi.com/support/documents?type=software
+
+Here are the basic steps:
+- Run AX-RADIOLAB
+- You only need to configure the PHY and Framing tabs.  Make sure you set the Fxtal to 16 MHz in the PHY tab
+(if you forget, you will get AX initialization failure messages when you run your code). You can view and
+change the registers by clicking the Expert Settings button.
+- When you are done, click Calculate Registers then Save and Write Output. 
+- Click on the Edit Master button - this will launch Code::Blocks (if Code::Blocks is already open, you might get an error
+close Code::Blocks then click on Edit Master again.)
+- Open the file Sources/AX_Radio_Lab_output/config.c which has your new configuration. 
+- You will need to manually copy the configuration settings to the file generated/config.c