Alan Johnston
7 years ago
parent
84ca6f7755
commit
ced44d2f97
@ -0,0 +1,216 @@
|
|||||||
|
# -*- coding: utf-8 -*-
|
||||||
|
|
||||||
|
"""
|
||||||
|
config_webrx: configuration options for OpenWebRX
|
||||||
|
|
||||||
|
This file is part of OpenWebRX,
|
||||||
|
an open-source SDR receiver software with a web UI.
|
||||||
|
Copyright (c) 2013-2015 by Andras Retzler <randras@sdr.hu>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU Affero General Public License as
|
||||||
|
published by the Free Software Foundation, either version 3 of the
|
||||||
|
License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU Affero General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Affero General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
|
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||||||
|
|
||||||
|
In addition, as a special exception, the copyright holders
|
||||||
|
state that config_rtl.py and config_webrx.py are not part of the
|
||||||
|
Corresponding Source defined in GNU AGPL version 3 section 1.
|
||||||
|
|
||||||
|
(It means that you do not have to redistribute config_rtl.py and
|
||||||
|
config_webrx.py if you make any changes to these two configuration files,
|
||||||
|
and use them for running your web service with OpenWebRX.)
|
||||||
|
"""
|
||||||
|
|
||||||
|
# NOTE: you can find additional information about configuring OpenWebRX in the Wiki:
|
||||||
|
# https://github.com/simonyiszk/openwebrx/wiki
|
||||||
|
|
||||||
|
# ==== Server settings ====
|
||||||
|
web_port=8073
|
||||||
|
server_hostname="localhost" # If this contains an incorrect value, the web UI may freeze on load (it can't open websocket)
|
||||||
|
max_clients=20
|
||||||
|
|
||||||
|
# ==== Web GUI configuration ====
|
||||||
|
receiver_name="ARISS Ground Station"
|
||||||
|
receiver_location=""
|
||||||
|
receiver_qra=""
|
||||||
|
receiver_asl=0
|
||||||
|
receiver_ant="monopole"
|
||||||
|
receiver_device="RTL-SDR"
|
||||||
|
receiver_admin="ku2y@amsat.org"
|
||||||
|
receiver_gps=(39.0302,-77.0747)
|
||||||
|
photo_height=350
|
||||||
|
photo_title="Panorama of Budapest from Schönherz Zoltán Dormitory"
|
||||||
|
photo_desc="""
|
||||||
|
You can add your own background photo and receiver information.<br />
|
||||||
|
Receiver is operated by: <a href="mailto:%[RX_ADMIN]">%[RX_ADMIN]</a><br/>
|
||||||
|
Device: %[RX_DEVICE]<br />
|
||||||
|
Antenna: %[RX_ANT]<br />
|
||||||
|
Website: <a href="http://localhost" target="_blank">http://localhost</a>
|
||||||
|
"""
|
||||||
|
|
||||||
|
# ==== sdr.hu listing ====
|
||||||
|
# If you want your ham receiver to be listed publicly on sdr.hu, then take the following steps:
|
||||||
|
# 1. Register at: http://sdr.hu/register
|
||||||
|
# 2. You will get an unique key by email. Copy it and paste here:
|
||||||
|
sdrhu_key = ""
|
||||||
|
# 3. Set this setting to True to enable listing:
|
||||||
|
sdrhu_public_listing = False
|
||||||
|
|
||||||
|
# ==== DSP/RX settings ====
|
||||||
|
fft_fps=9
|
||||||
|
fft_size=4096 #Should be power of 2
|
||||||
|
fft_voverlap_factor=0.3 #If fft_voverlap_factor is above 0, multiple FFTs will be used for creating a line on the diagram.
|
||||||
|
|
||||||
|
samp_rate = 250000
|
||||||
|
# samp_rate = 2400000
|
||||||
|
center_freq = 440450000
|
||||||
|
rf_gain = 5 #in dB. For an RTL-SDR, rf_gain=0 will set the tuner to auto gain mode, else it will be in manual gain mode.
|
||||||
|
ppm = 0
|
||||||
|
|
||||||
|
audio_compression="adpcm" #valid values: "adpcm", "none"
|
||||||
|
fft_compression="adpcm" #valid values: "adpcm", "none"
|
||||||
|
|
||||||
|
digimodes_enable=False # True #Decoding digimodes come with higher CPU usage.
|
||||||
|
digimodes_fft_size=1024
|
||||||
|
|
||||||
|
start_rtl_thread=True
|
||||||
|
|
||||||
|
"""
|
||||||
|
Note: if you experience audio underruns while CPU usage is 100%, you can:
|
||||||
|
- decrease `samp_rate`,
|
||||||
|
- set `fft_voverlap_factor` to 0,
|
||||||
|
- decrease `fft_fps` and `fft_size`,
|
||||||
|
- limit the number of users by decreasing `max_clients`.
|
||||||
|
"""
|
||||||
|
|
||||||
|
# ==== I/Q sources ====
|
||||||
|
# (Uncomment the appropriate by removing # characters at the beginning of the corresponding lines.)
|
||||||
|
|
||||||
|
#################################################################################################
|
||||||
|
# Is my SDR hardware supported? #
|
||||||
|
# Check here: https://github.com/simonyiszk/openwebrx/wiki#guides-for-receiver-hardware-support #
|
||||||
|
#################################################################################################
|
||||||
|
|
||||||
|
# You can use other SDR hardware as well, by giving your own command that outputs the I/Q samples... Some examples of configuration are available here (default is RTL-SDR):
|
||||||
|
|
||||||
|
# >> RTL-SDR via rtl_sdr
|
||||||
|
start_rtl_command="rtl_sdr -s {samp_rate} -f {center_freq} -p {ppm} -g {rf_gain} -".format(rf_gain=rf_gain, center_freq=center_freq, samp_rate=samp_rate, ppm=ppm)
|
||||||
|
format_conversion="csdr convert_u8_f"
|
||||||
|
|
||||||
|
#lna_gain=8
|
||||||
|
#rf_amp=1
|
||||||
|
#start_rtl_command="hackrf_transfer -s {samp_rate} -f {center_freq} -g {rf_gain} -l{lna_gain} -a{rf_amp} -r-".format(rf_gain=rf_gain, center_freq=center_freq, samp_rate=samp_rate, ppm=ppm, rf_amp=rf_amp, lna_gain=lna_gain)
|
||||||
|
#format_conversion="csdr convert_s8_f"
|
||||||
|
"""
|
||||||
|
To use a HackRF, compile the HackRF host tools from its "stdout" branch:
|
||||||
|
git clone https://github.com/mossmann/hackrf/
|
||||||
|
cd hackrf
|
||||||
|
git fetch
|
||||||
|
git checkout origin/stdout
|
||||||
|
cd host
|
||||||
|
mkdir build
|
||||||
|
cd build
|
||||||
|
cmake .. -DINSTALL_UDEV_RULES=ON
|
||||||
|
make
|
||||||
|
sudo make install
|
||||||
|
"""
|
||||||
|
|
||||||
|
# >> Sound card SDR (needs ALSA)
|
||||||
|
# I did not have the chance to properly test it.
|
||||||
|
#samp_rate = 96000
|
||||||
|
#start_rtl_command="arecord -f S16_LE -r {samp_rate} -c2 -".format(samp_rate=samp_rate)
|
||||||
|
#format_conversion="csdr convert_s16_f | csdr gain_ff 30"
|
||||||
|
|
||||||
|
# >> /dev/urandom test signal source
|
||||||
|
# samp_rate = 2400000
|
||||||
|
# start_rtl_command="cat /dev/urandom | (pv -qL `python -c 'print int({samp_rate} * 2.2)'` 2>&1)".format(rf_gain=rf_gain, center_freq=center_freq, samp_rate=samp_rate)
|
||||||
|
# format_conversion="csdr convert_u8_f"
|
||||||
|
|
||||||
|
# >> Pre-recorded raw I/Q file as signal source
|
||||||
|
# You will have to correctly specify: samp_rate, center_freq, format_conversion in order to correctly play an I/Q file.
|
||||||
|
#start_rtl_command="(while true; do cat my_iq_file.raw; done) | csdr flowcontrol {sr} 20 ".format(sr=samp_rate*2*1.05)
|
||||||
|
#format_conversion="csdr convert_u8_f"
|
||||||
|
|
||||||
|
#>> The rx_sdr command works with a variety of SDR harware: RTL-SDR, HackRF, SDRplay, UHD, Airspy, Red Pitaya, audio devices, etc.
|
||||||
|
# It will auto-detect your SDR hardware if the following tools are installed:
|
||||||
|
# * the vendor provided driver and library,
|
||||||
|
# * the vendor-specific SoapySDR wrapper library,
|
||||||
|
# * and SoapySDR itself.
|
||||||
|
# Check out this article on the OpenWebRX Wiki: https://github.com/simonyiszk/openwebrx/wiki/Using-rx_tools-with-OpenWebRX/
|
||||||
|
#start_rtl_command="rx_sdr -F CF32 -s {samp_rate} -f {center_freq} -p {ppm} -g {rf_gain} -".format(rf_gain=rf_gain, center_freq=center_freq, samp_rate=samp_rate, ppm=ppm)
|
||||||
|
#format_conversion=""
|
||||||
|
|
||||||
|
# >> gr-osmosdr signal source using GNU Radio (follow this guide: https://github.com/simonyiszk/openwebrx/wiki/Using-GrOsmoSDR-as-signal-source)
|
||||||
|
#start_rtl_command="cat /tmp/osmocom_fifo"
|
||||||
|
#format_conversion=""
|
||||||
|
|
||||||
|
# ==== Misc settings ====
|
||||||
|
|
||||||
|
shown_center_freq = center_freq #you can change this if you use an upconverter
|
||||||
|
|
||||||
|
client_audio_buffer_size = 5
|
||||||
|
#increasing client_audio_buffer_size will:
|
||||||
|
# - also increase the latency
|
||||||
|
# - decrease the chance of audio underruns
|
||||||
|
|
||||||
|
start_freq = center_freq
|
||||||
|
start_mod = "nfm" #nfm, am, lsb, usb, cw
|
||||||
|
|
||||||
|
iq_server_port = 4951 #TCP port for ncat to listen on. It will send I/Q data over its connections, for internal use in OpenWebRX. It is only accessible from the localhost by default.
|
||||||
|
|
||||||
|
#access_log = "~/openwebrx_access.log"
|
||||||
|
|
||||||
|
# ==== Color themes ====
|
||||||
|
|
||||||
|
#A guide is available to help you set these values: https://github.com/simonyiszk/openwebrx/wiki/Calibrating-waterfall-display-levels
|
||||||
|
|
||||||
|
### default theme by teejez:
|
||||||
|
waterfall_colors = "[0x000000ff,0x0000ffff,0x00ffffff,0x00ff00ff,0xffff00ff,0xff0000ff,0xff00ffff,0xffffffff]"
|
||||||
|
waterfall_min_level = -88 #in dB
|
||||||
|
waterfall_max_level = -20
|
||||||
|
waterfall_auto_level_margin = (5, 40)
|
||||||
|
### old theme by HA7ILM:
|
||||||
|
#waterfall_colors = "[0x000000ff,0x2e6893ff, 0x69a5d0ff, 0x214b69ff, 0x9dc4e0ff, 0xfff775ff, 0xff8a8aff, 0xb20000ff]"
|
||||||
|
#waterfall_min_level = -115 #in dB
|
||||||
|
#waterfall_max_level = 0
|
||||||
|
#waterfall_auto_level_margin = (20, 30)
|
||||||
|
##For the old colors, you might also want to set [fft_voverlap_factor] to 0.
|
||||||
|
|
||||||
|
#Note: When the auto waterfall level button is clicked, the following happens:
|
||||||
|
# [waterfall_min_level] = [current_min_power_level] - [waterfall_auto_level_margin[0]]
|
||||||
|
# [waterfall_max_level] = [current_max_power_level] + [waterfall_auto_level_margin[1]]
|
||||||
|
#
|
||||||
|
# ___|____________________________________|____________________________________|____________________________________|___> signal power
|
||||||
|
# \_waterfall_auto_level_margin[0]_/ |__ current_min_power_level | \_waterfall_auto_level_margin[1]_/
|
||||||
|
# current_max_power_level __|
|
||||||
|
|
||||||
|
# 3D view settings
|
||||||
|
mathbox_waterfall_frequency_resolution = 128 #bins
|
||||||
|
mathbox_waterfall_history_length = 10 #seconds
|
||||||
|
mathbox_waterfall_colors = "[0x000000ff,0x2e6893ff, 0x69a5d0ff, 0x214b69ff, 0x9dc4e0ff, 0xfff775ff, 0xff8a8aff, 0xb20000ff]"
|
||||||
|
|
||||||
|
# === Experimental settings ===
|
||||||
|
#Warning! The settings below are very experimental.
|
||||||
|
csdr_dynamic_bufsize = False # This allows you to change the buffering mode of csdr.
|
||||||
|
csdr_print_bufsizes = False # This prints the buffer sizes used for csdr processes.
|
||||||
|
csdr_through = False # Setting this True will print out how much data is going into the DSP chains.
|
||||||
|
|
||||||
|
nmux_memory = 50 #in megabytes. This sets the approximate size of the circular buffer used by nmux.
|
||||||
|
|
||||||
|
#Look up external IP address automatically from icanhazip.com, and use it as [server_hostname]
|
||||||
|
"""
|
||||||
|
print "[openwebrx-config] Detecting external IP address..."
|
||||||
|
import urllib2
|
||||||
|
server_hostname=urllib2.urlopen("http://icanhazip.com").read()[:-1]
|
||||||
|
print "[openwebrx-config] External IP address detected:", server_hostname
|
||||||
|
"""
|
||||||
@ -0,0 +1,8 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to run CubeSat Simulator Lite
|
||||||
|
#
|
||||||
|
# on SDR application, listen at 107.9
|
||||||
|
|
||||||
|
echo -e "\nScript to run CubeSat Simulator Lite \n"
|
||||||
|
|
||||||
|
sudo /home/pi/CubeSatSim/PiFmRds/src/pi_fm_rds -audio /home/pi/CubeSatSim/wav/afsk2.wav -freq 107.9
|
||||||
@ -0,0 +1,10 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to auto decode CubeSat Simulator telemetry
|
||||||
|
|
||||||
|
# kill openwebrx if it is running
|
||||||
|
ps -ef | grep rtl | grep -v grep | awk '{print $2}' | sudo xargs kill
|
||||||
|
|
||||||
|
echo -e "Script to auto decode CubeSat Simulator telemetry\n"
|
||||||
|
|
||||||
|
sudo rtl_fm -f 107.906M -M wbfm -s 70000 -g 48 - | multimon-ng -a AFSK1200 -A -t raw -
|
||||||
|
|
||||||
@ -0,0 +1,37 @@
|
|||||||
|
[General]
|
||||||
|
configversion=2
|
||||||
|
crashed=false
|
||||||
|
|
||||||
|
[audio]
|
||||||
|
gain=224
|
||||||
|
udp_host=localhost
|
||||||
|
|
||||||
|
[fft]
|
||||||
|
fft_size=4096
|
||||||
|
split=40
|
||||||
|
|
||||||
|
[gui]
|
||||||
|
geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x2\0\0\0\0\0#\0\0\0\x32\0\0\x3\r\0\0\x3\b\0\0\0%\0\0\0P\0\0\x3\r\0\0\x3\b\0\0\0\0\0\0\0\0\x3 )
|
||||||
|
state=@ByteArray(\0\0\0\xff\0\0\0\0\xfd\0\0\0\x2\0\0\0\x1\0\0\x1&\0\0\x2\\\xfc\x2\0\0\0\x2\xfc\0\0\0\x43\0\0\x2\\\0\0\x1\x8e\0\b\0!\xfa\0\0\0\x2\x2\0\0\0\x3\xfb\0\0\0\x18\0\x44\0o\0\x63\0k\0I\0n\0p\0u\0t\0\x43\0t\0l\x1\0\0\0\0\xff\xff\xff\xff\0\0\x1\x35\0\xff\xff\xff\xfb\0\0\0\x12\0\x44\0o\0\x63\0k\0R\0x\0O\0p\0t\x1\0\0\0\0\xff\xff\xff\xff\0\0\x1l\0\a\xff\xff\xfb\0\0\0\xe\0\x44\0o\0\x63\0k\0\x46\0\x66\0t\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\xc8\0\a\xff\xff\xfc\0\0\x1\xd7\0\0\0\xc8\0\0\0\0\0\xff\xff\xff\xfa\xff\xff\xff\xff\x2\0\0\0\x2\xfb\0\0\0\x12\0\x44\0o\0\x63\0k\0\x41\0u\0\x64\0i\0o\0\0\0\0\0\xff\xff\xff\xff\0\0\0\xc8\0\xff\xff\xff\xfb\0\0\0\xe\0\x44\0o\0\x63\0k\0R\0\x44\0S\0\0\0\0\0\xff\xff\xff\xff\0\0\0h\0\xff\xff\xff\0\0\0\x3\0\0\x1\xbd\0\0\0\xeb\xfc\x1\0\0\0\x1\xfb\0\0\0\x1a\0\x44\0o\0\x63\0k\0\x42\0o\0o\0k\0m\0\x61\0r\0k\0s\x1\0\0\0\0\0\0\x1\xbd\0\0\x1\x42\0\xff\xff\xff\0\0\x1\xbd\0\0\x1k\0\0\0\x1\0\0\0\x2\0\0\0\b\0\0\0\x2\xfc\0\0\0\x1\0\0\0\x2\0\0\0\x1\0\0\0\x16\0m\0\x61\0i\0n\0T\0o\0o\0l\0\x42\0\x61\0r\x1\0\0\0\0\xff\xff\xff\xff\0\0\0\0\0\0\0\0)
|
||||||
|
|
||||||
|
[input]
|
||||||
|
bandwidth=2400000
|
||||||
|
device="rtl=0"
|
||||||
|
frequency=98506000
|
||||||
|
gains=@Variant(\0\0\0\b\0\0\0\x1\0\0\0\x6\0L\0N\0\x41\0\0\0\x2\0\0\x1\xf0)
|
||||||
|
sample_rate=512000
|
||||||
|
|
||||||
|
[output]
|
||||||
|
device="bcm2835 ALSA: - (hw:0,0)"
|
||||||
|
|
||||||
|
[receiver]
|
||||||
|
agc_decay=100
|
||||||
|
agc_off=true
|
||||||
|
demod=5
|
||||||
|
filter_high_cut=80000
|
||||||
|
filter_low_cut=-80000
|
||||||
|
offset=-402000
|
||||||
|
sql_level=-42.5
|
||||||
|
|
||||||
|
[remote_control]
|
||||||
|
allowed_hosts=::ffff:127.0.0.1
|
||||||
@ -0,0 +1,16 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to auto decode CubeSat Simulator telemetry
|
||||||
|
|
||||||
|
# kill rtl if running
|
||||||
|
ps -ef | grep rtl | grep -v grep | awk '{print $2}' | sudo xargs kill
|
||||||
|
|
||||||
|
# kill openwebrx process if running
|
||||||
|
ps -ef | grep openwebrx | grep -v grep | awk '{print $2}' | sudo xargs kill
|
||||||
|
|
||||||
|
# kill csdr process if running
|
||||||
|
ps -ef | grep csdr | grep -v grep | awk '{print $2}' | sudo xargs kill
|
||||||
|
|
||||||
|
echo -e "Script to run Gqrx\n"
|
||||||
|
|
||||||
|
/home/pi/gqrx-sdr-2.11.5-linux-rpi3/gqrx
|
||||||
|
|
||||||
@ -0,0 +1,19 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to kill all SDR or RTL processes
|
||||||
|
#
|
||||||
|
|
||||||
|
echo -e "\nKilling all SDR or RTL processes \n"
|
||||||
|
|
||||||
|
# kill rtl if running
|
||||||
|
ps -ef | grep rtl_ | grep -v grep | awk '{print $2}' | sudo xargs kill > /dev/null 2>&1
|
||||||
|
|
||||||
|
# kill openwebrx process if running
|
||||||
|
ps -ef | grep openwebrx | grep -v grep | awk '{print $2}' | sudo xargs kill > /dev/null 2>&1
|
||||||
|
|
||||||
|
# kill csdr process if running
|
||||||
|
ps -ef | grep csdr | grep -v grep | awk '{print $2}' | sudo xargs kill > /dev/null 2>&1
|
||||||
|
|
||||||
|
# kill gqrx process if running
|
||||||
|
ps -ef | grep gqrx-sdr-2.11.5-linux-rpi3/gqrx | grep -v grep | awk '{print $2}' | sudo xargs kill > /dev/null 2>&1
|
||||||
|
|
||||||
|
|
||||||
@ -0,0 +1,14 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to run RTL-TCP Server
|
||||||
|
#
|
||||||
|
# On SDR client, use 10.3.141.1:1234 to connect
|
||||||
|
|
||||||
|
echo -e "\nScript to run RTL-TCP Server for ARISS Ground Station\n"
|
||||||
|
|
||||||
|
echo -e "IP Address to use in web browsers is: "
|
||||||
|
|
||||||
|
hostname -I|cut -f1 -d ' '
|
||||||
|
|
||||||
|
./kill_all.sh
|
||||||
|
|
||||||
|
sudo /bin/sh -c '/usr/local/bin/rtl_tcp -a $(hostname -I|cut -f2 -d " ")'
|
||||||
@ -0,0 +1,14 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to run RTL-TCP Server
|
||||||
|
#
|
||||||
|
# On SDR client, use 10.3.141.1:1234 to connect
|
||||||
|
|
||||||
|
echo -e "\nScript to run RTL-TCP Server for ARISS Ground Station\n"
|
||||||
|
|
||||||
|
echo -e "IP Address to use in web browsers is: "
|
||||||
|
|
||||||
|
hostname -I|cut -f1 -d ' '
|
||||||
|
|
||||||
|
./kill_all.sh
|
||||||
|
|
||||||
|
sudo /bin/sh -c '/usr/local/bin/rtl_tcp -a $(hostname -I|cut -f1 -d " ")'
|
||||||
@ -0,0 +1,15 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to run OpenWebRX SDR
|
||||||
|
|
||||||
|
echo -e "\nScript to run SDR for ARISS Ground Station\n"
|
||||||
|
|
||||||
|
echo -e "IP Address to use in web browsers is: "
|
||||||
|
|
||||||
|
hostname -I|cut -f1 -d ' '
|
||||||
|
|
||||||
|
|
||||||
|
./kill_all.sh
|
||||||
|
|
||||||
|
cd ~/openwebrx
|
||||||
|
|
||||||
|
sudo python openwebrx.py config_webrx_145
|
||||||
@ -0,0 +1,15 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to run OpenWebRX SDR
|
||||||
|
|
||||||
|
echo -e "\nScript to run SDR for ARISS Ground Station\n"
|
||||||
|
|
||||||
|
echo -e "IP Address to use in web browsers is: "
|
||||||
|
|
||||||
|
hostname -I|cut -f1 -d ' '
|
||||||
|
|
||||||
|
|
||||||
|
./kill_all.sh
|
||||||
|
|
||||||
|
cd ~/openwebrx
|
||||||
|
|
||||||
|
sudo python openwebrx.py config_webrx_440
|
||||||
@ -0,0 +1,15 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# script to run OpenWebRX SDR
|
||||||
|
|
||||||
|
echo -e "\nScript to run SDR for ARISS Ground Station\n"
|
||||||
|
|
||||||
|
echo -e "IP Address to use in web browsers is: "
|
||||||
|
|
||||||
|
hostname -I|cut -f1 -d ' '
|
||||||
|
|
||||||
|
|
||||||
|
./kill_all.sh
|
||||||
|
|
||||||
|
cd ~/openwebrx
|
||||||
|
|
||||||
|
sudo python openwebrx.py config_webrx_107
|
||||||
Loading…
Reference in new issue