Update Payload_BME280_MPU6050_XS.ino cleanup to harmonize with Extended

stempayload/Payload_BME280_MPU6050_XS/Payload_BME280_MPU6050_XS.ino

@@ -1,6 +1,6 @@
 // code for Pico or Pro Micro or STM32 on the CubeSat Simulator STEM Payload board
 // works wih CubeSatSim software v1.3.2 or later
-// extra sensors can be added in payload_extension.cpp
+// extra sensors can be added in payload_extension.cpp file
 
 #include <Wire.h>
 #include <Adafruit_Sensor.h>
@@ -13,7 +13,6 @@ UART Serial2(8, 9, 0, 0);
 #include <EEPROM.h>
 #endif
 
-
 #define SEALEVELPRESSURE_HPA (1013.25)
 
 Adafruit_BME280 bme;
@@ -31,10 +30,6 @@ void ee_prom_word_write(int addr, int val);
 short ee_prom_word_read(int addr);
 int first_time = true;
 int first_read = true;
-bool check_for_wifi();
-bool wifi = false;
-int led_builtin_pin;
-#define PICO_W    // define if Pico W board.  Otherwise, compilation fail for Pico or runtime fail if compile as Pico W
 
 #if defined ARDUINO_ARCH_RP2040
 float T2 = 26.3; // Temperature data point 1
@@ -70,17 +65,9 @@ extern void payload_loop();  // sensor extension read function defined in payloa
 
 void setup() {
 	
-#ifdef ARDUINO_ARCH_RP2040	
-//   Serial1.setRX(1);
-//   delay(100);
-//   Serial1.setTX(0);
-//   delay(100);	
-#endif
-	
   Serial.begin(115200); // Serial Monitor for testing
  
-  Serial1.begin(115200);  // Pi UART faster spd
+  Serial1.begin(115200);  // for communication with Pi Zero 
-//  Serial1.begin(9600);  // Pi UART faster spd	
 
   delay(10000);		
  
@@ -91,9 +78,7 @@ void setup() {
 
   Serial.println("Starting Serial2 for optional GPS on JP12");		
 //  Serial2.begin(9600);  // serial from  - some  modules need 115200
-
+  Serial2.begin(9600);   // serial from GPS or other serial sensor.  Some GPS need 115200
-  // pinMode(0, INPUT);
-  // pinMode(1, INPUT);
 
   // set all Pico GPIO connected pins to input	
   for (int i = 6; i < 22; i++) { 
@@ -144,13 +129,10 @@ void setup() {
   }
   else
   {
-#ifdef ARDUINO_ARCH_RP2040	  
     Serial.println("Calculating gyro offsets\n");
     mpu6050.calcGyroOffsets(true);	  
-#endif	  
 #ifndef ARDUINO_ARCH_RP2040	  	  
-    Serial.println("Calculating gyro offsets and storing in EEPROM\n");
+    Serial.println("Storing gyro offsets in EEPROM\n");
-    mpu6050.calcGyroOffsets(true);
  
     eeprom_word_write(0, 0xA07);
     eeprom_word_write(1, (int)(mpu6050.getGyroXoffset() * 100.0) + 0.5);
@@ -330,7 +312,6 @@ void loop() {
 	
 //  delay(1000);  // not needed due to gps 1 second polling delay
   get_gps();	    	
-	
 }
  
 void eeprom_word_write(int addr, int val)
@@ -365,23 +346,10 @@ void blink_setup()
 #endif
 
 #if defined ARDUINO_ARCH_RP2040
-/*   if (check_for_wifi()) {
-     wifi = true;
-     led_builtin_pin = LED_BUILTIN; // use default GPIO for Pico W	  
      pinMode(LED_BUILTIN, OUTPUT);     
-//     configure_wifi();	  
+     pinMode(18, OUTPUT);  // blue LED on STEM Payload Board v1.3.2
-  }  else  {
+     pinMode(19, OUTPUT);  // green LED on STEM Payload Board v1.3.2	   
-     led_builtin_pin = 25; // manually set GPIO 25 for Pico board	  
-//     pinMode(25, OUTPUT);
-*/	   
-     led_builtin_pin = LED_BUILTIN; // use default GPIO for Pico W	  
-     pinMode(LED_BUILTIN, OUTPUT);     
-     wifi = true;
-     pinMode(18, OUTPUT);
-     pinMode(19, OUTPUT);	   
-//  }
 #endif
-
 }
  
 void blink(int length)
@@ -396,10 +364,7 @@ void blink(int length)
 #endif  
 
 #if defined ARDUINO_ARCH_RP2040
-   if (wifi)	
     digitalWrite(LED_BUILTIN, HIGH);   // set the built-in LED ON
-  else
-    digitalWrite(led_builtin_pin, HIGH);   // set the built-in LED ON
 #endif  
  
 #if defined(ARDUINO_ARCH_STM32F0) || defined(ARDUINO_ARCH_STM32F1) || defined(ARDUINO_ARCH_STM32F3) || defined(ARDUINO_ARCH_STM32F4) || defined(ARDUINO_ARCH_STM32L4)
@@ -412,14 +377,8 @@ void blink(int length)
 #endif  
 
 #if defined ARDUINO_ARCH_RP2040 
-   if (wifi)	
     digitalWrite(LED_BUILTIN, LOW);   // set the built-in LED OFF
-  else
-    digitalWrite(led_builtin_pin, LOW);   // set the built-in LED OFF
- 
-//  delay(length);              // wait for a lenth of time
 #endif   
-
 }
  
 void led_set(int ledPin, bool state)
@@ -459,38 +418,7 @@ int read_analog()
     return(sensorValue); 
 }
 
-bool check_for_wifi() {
-	
-#ifndef PICO_W
-	
-  Serial.println("WiFi disabled in software");
-  return(false);  // skip check if not Pico W board or compilation will fail
-	
-#endif
-	
-  pinMode(29, INPUT);	
-   const float conversion_factor = 3.3f / (1 << 12);
-   uint16_t result = analogRead(29);
-/*	
-//   Serial.printf("ADC3 value: 0x%03x, voltage: %f V\n", result, result * conversion_factor);
-   Serial.print("ADC3 value and voltage: ");
-   Serial.print(result);
-   Serial.print(" ");
-   Serial.println(result * conversion_factor);
-*/	
-	
-  if (result < 0x10) {
-    Serial.println("\nPico W detected!\n");
-    return(true);
-  }
-  else {
-     Serial.println("\nPico detected!\n");
-     return(false);  
-  }
-}
-
 void get_gps() {
-//#ifndef ARDUINO_ARCH_RP2040 	
   bool newData = false;  
   unsigned long start = millis();	
 	
@@ -535,5 +463,4 @@ void get_gps() {
   } else
 //	    Serial.printf("GPS read no new data: %d\n", millis() - start);	      
     ;
-//#endif	
 }