Update cubesatsim.ino

cubesatsim/cubesatsim.ino

@@ -2268,13 +2268,15 @@ void start_pwm() {
 //
   Serial.println("Starting pwm!");
 	
-  pwm_value = 128 - pwm_amplitude;
+//  pwm_value = 128 - pwm_amplitude;
 	
 //  set_sys_clock_khz(125000, true); 
   set_sys_clock_khz(133000, true); 	
-  gpio_set_function(BPSK_PWM_PIN, GPIO_FUNC_PWM);
+  gpio_set_function(BPSK_PWM_A_PIN, GPIO_FUNC_PWM);
-
+  gpio_set_function(BPSK_PWM_B_PIN, GPIO_FUNC_PWM);
-  bpsk_pin_slice = pwm_gpio_to_slice_num(BPSK_PWM_PIN);
+	
+  bpsk_pin_slice_A = pwm_gpio_to_slice_num(BPSK_PWM_A_PIN);
+  bpsk_pin_slice_B = pwm_gpio_to_slice_num(BPSK_PWM_B_PIN);
 /*
   // Setup PWM interrupt to fire when PWM cycle is complete
   pwm_clear_irq(bpsk_pin_slice);
@@ -2289,10 +2291,12 @@ void start_pwm() {
 //    pwm_config_set_wrap(&config, 178); // 250); 
     pwm_config_set_wrap(&config, 3);
 	
-    pwm_config_set_output_polarity( &config, polarity, polarity);	
+//    pwm_config_set_output_polarity( &config, polarity, polarity);	
-    pwm_init(bpsk_pin_slice, &config, true);
+    pwm_config_set_output_polarity( &config, true, false);	
-    pwm_set_gpio_level(BPSK_PWM_PIN, (config.top + 1) * 0.5);
+    pwm_init(bpsk_pin_slice_A, &config, true);
-	
+    pwm_init(bpsk_pin_slice_B, &config, true);
+    pwm_set_gpio_level(BPSK_PWM_A_PIN, (config.top + 1) * 0.5);
+    pwm_set_gpio_level(BPSK_PWM_B_PIN, (config.top + 1) * 0.5);	
 }
 /*
 void pwm_interrupt_handler() {
@@ -2712,22 +2716,32 @@ bool TimerHandler0(struct repeating_timer *t) {
 //  Serial.print("l1 ");
 //  Serial.print(wav_position);
 //  Serial.print(" ");
-/*
+	
+  if (buffer[wav_position++] > 0) {
+    digitalWrite(BPSK_CONTROL_A, HIGH);
+    digitalWrite(BPSK_CONTROL_B, LOW);  	  
+  } else {
+    digitalWrite(BPSK_CONTROL_A, LOW);
+    digitalWrite(BPSK_CONTROL_B, HIGH);  	    
+  }
+/*	
     tx_bit = (buffer[wav_position] > 0) ? HIGH: LOW;
 		
    digitalWrite(AUDIO_OUT_PIN, tx_bit);		
-*/
+
     tx_bit = (buffer[wav_position++] > 0) ? true: false;
+*/    
 /*	
     if (tx_bit)
       Serial.print("-");
     else
       Serial.print("_");
-*/	  
+*/
+/*	
     pwm_config_set_output_polarity( &config, tx_bit, tx_bit);	
     pwm_init(bpsk_pin_slice, &config, true);
     pwm_set_gpio_level(BPSK_PWM_PIN, (config.top + 1) * 0.5);	 
-	
+*/	
   if (wav_position > bufLen) { // 300) {
 	wav_position = wav_position - bufLen;
 //	Serial.print("\nR");
@@ -2746,7 +2760,9 @@ void start_isr() {
 	
 	Serial.println("Starting ISR");
 	
-	pinMode(AUDIO_OUT_PIN, OUTPUT);
+	pinMode(BPSK_CONTROL_A, OUTPUT);
+	pinMode(BPSK_CONTROL_B, OUTPUT);	
+	
 	
   if (ITimer0.attachInterruptInterval(833, TimerHandler0))
   {