KB8PMY
/
CubeSatSim
mirror of https://github.com/alanbjohnston/CubeSatSim.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Update config lots of small changes

Browse Source
pull/449/head
Alan Johnston 3 weeks ago committed by GitHub
parent d9c246add7
commit 0c6a094b01
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 30 additions and 42 deletions
Show Stats Download Patch File Download Diff File

72
config
Unescape View File

@ -290,7 +290,7 @@ TXPL=${11}
# echo ${14}
if [[ ( "${14}" == "sim" || "${14}" == "rig" ) && ( "$MODE" == "f" || "$MODE" == "b" || "$MODE" == "j" || "$MODE" == "G") ]] ; then
echo "Doppler frequency shift is ON but not active in this mode (only APRS, CW, SSTV, PacSat, and Repeater modes)"
echo "Doppler frequency shift is ON but not active in this mode (only APRS, CW, SSTV, Pacsat, and Repeater modes)"
echo -n "TX Frequency is approximately: "
echo -n ${7}
echo -n " MHz, RX Frequency is: "
@ -306,7 +306,7 @@ TXPL=${11}
# echo -n ${8}
# echo " MHz"
elif [ "${14}" = "rig" ] ; then
echo "rigctld Doppler frequency shift enabled"
echo "Radio Control Doppler frequency shift enabled"
echo -n "Current TX Frequency (Hz) is: "
head -n 1 /home/pi/CubeSatSim/frequency.txt | cut -d ' ' -f 1
echo -n "Current RX Frequency (Hz) is: "
@ -345,7 +345,7 @@ TXPL=${11}
# echo $MODE
if [ "$MODE" = "p" ] || [ "$MODE" = "P" ] ; then
echo "Squelch is off since PacSat or PacSat Ground Station mode"
echo "Squelch is off since Pacsat or Pacsat Ground Station mode"
else
echo -n "Squelch level is: "
echo $SQUELCH
@ -361,14 +361,14 @@ TXPL=${11}
echo "Radio DTMF/APRS command and control is ON"
else
if [ "$MODE" = "p" ] || [ "$MODE" = "P" ] ; then
echo "Radio carrier command and control is off since PacSat or PacSat Ground Station mode"
echo "Radio carrier command and control is off since Pacsat or Pacsat Ground Station mode"
else
echo "Radio carrier command and control is ON"
fi
fi
else
if [ "$MODE" = "p" ] || [ "$MODE" = "P" ] ; then
echo "Radio carrier command and control is off since PacSat or PacSat Ground Station mode"
echo "Radio carrier command and control is off since Pacsat or Pacsat Ground Station mode"
else
echo "Radio carrier command and control is ON"
fi
@ -568,7 +568,6 @@ elif [ "$1" = "-s" ]; then
elif [ "$1" = "-t" ]; then
echo
echo "Setting the Simulated Telemetry setting"
echo
@ -615,7 +614,6 @@ elif [ "$1" = "-t" ]; then
elif [ "$1" = "-c" ]; then
echo
echo "Setting the CALLSIGN"
echo
@ -657,7 +655,6 @@ elif [ "$1" = "-c" ]; then
elif [ "$1" = "-r" ]; then
echo
echo "Set the Reset Count for FoxTelem"
echo
# echo -e "Current sim.cfg configuration file:"
@ -708,7 +705,6 @@ elif [ "$1" = "-r" ]; then
elif [ "$1" = "-l" ]; then
echo
echo "Editing latitude and longitude in the"
echo "configuration file for CubeSatSim"
echo "(Only used for APRS telemetry)"
@ -793,7 +789,6 @@ elif [ "$1" = "-l" ]; then
elif [ "$1" = "-S" ]; then
echo
echo "Scan both I2C buses on the Raspberry Pi"
echo
@ -808,7 +803,6 @@ elif [ "$1" = "-S" ]; then
elif [ "$1" = "-C" ]; then
echo
echo "Clear logs"
echo
@ -921,7 +915,6 @@ elif [ "$1" = "-T" ]; then
elif [ "$1" = "-d" ]; then
echo
echo "Change command and control Direwolf state"
echo
if [[ $(arecord -l | grep card) ]]; then
@ -1000,7 +993,6 @@ elif [ "$1" = "-d" ]; then
elif [ "$1" = "-D" ]; then
echo
echo "Change Transmit Commands state"
echo
@ -1032,7 +1024,6 @@ elif [ "$1" = "-D" ]; then
elif [ "$1" = "-R" ]; then
echo
echo "Reset the Commands Count in the file command_count.txt"
echo
@ -1059,7 +1050,6 @@ elif [ "$1" = "-R" ]; then
elif [ "$1" = "-B" ]; then
echo
echo "Manually setting Safe Mode (battery saver mode)"
echo
@ -1122,7 +1112,6 @@ elif [ "$1" = "-B" ]; then
elif [ "$1" = "-q" ]; then
echo
echo "Setting the Squelch setting"
echo
@ -1171,16 +1160,14 @@ elif [ "$1" = "-q" ]; then
elif [ "$1" = "-Q" ]; then
# echo
echo "Reading current Squelch for 10 seconds"
echo "Squelch is active low (0 means squelch broken)"
echo "Squelch is active low (0 means squelch broken, received a signal)"
echo
timeout 10 bash -c -- 'while true; do (gpio read 22 && sleep 1); done'
elif [ "$1" = "-P" ]; then
echo
echo "Setting the PL (Private Line) CTCSS/CDCSS setting"
echo
@ -1274,8 +1261,7 @@ elif [ "$1" = "-P" ]; then
elif [ "$1" = "-F" ]; then
echo
echo "Editing the RX and RX frequency"
echo "Editing the TX and RX frequency"
echo
value=`cat /home/pi/CubeSatSim/sim.cfg`
@ -1286,8 +1272,6 @@ elif [ "$1" = "-F" ]; then
echo "Current value of TX frequency is" $7 "MHz"
echo
echo "Current value of RX frequency is" $8 "MHz"
echo
# echo $1 $2 $3 $4 $5 $6 $7 $8 $9 ${10} ${11} ${12} ${13} ${14}
@ -1301,7 +1285,9 @@ elif [ "$1" = "-F" ]; then
tx="$7"
echo "Keeping value of" $tx "MHz"
fi
echo
echo "Current value of RX frequency is" $8 "MHz"
echo
echo "Enter RX frequency in MHz (70cm band only): "
read rx
@ -1385,7 +1371,6 @@ elif [ "$1" = "-o" ]; then
elif [ "$1" = "-H" ]; then
# echo
echo "Setting Balloon mode"
echo
@ -1489,7 +1474,7 @@ elif [ "$1" = "-n" ]; then
sudo echo $new > /home/pi/CubeSatSim/.mode
restart=1
elif [ "$1" = "p" ] || [ "$1" = "P" ] ; then
echo "Switching to PacSat mode"
echo "Switching to Pacsat mode"
sudo echo $new > /home/pi/CubeSatSim/.mode
reboot=1
else
@ -1553,7 +1538,7 @@ elif [ "$1" = "-A" ]; then
while [ "$MODE" != "x" ];
do
echo "Enter the mode to change: a=APRS, f=FSK, b=BPSK, s=SSTV, m=CW, e=Repeater, j=FUNcube, p=PacSat, o=Beacon on/off x=Exit this mode"
echo "Enter the mode to change: a=APRS, f=FSK, b=BPSK, s=SSTV, m=CW, e=Repeater, j=FUNcube, p=Pacsat, o=Beacon on/off x=Exit this mode"
read MODE
if [ "$MODE" != "x" ]; then
@ -1575,8 +1560,7 @@ elif [ "$1" = "-A" ]; then
elif [ "$1" = "-L" ]; then
echo
echo "Set microphone level for command and control"
echo "Set microphone level for command and control and Pacsat"
echo
CARDUSB=$(aplay -l | grep "Device" | grep -oP '(?<=card )\d{1,2}')
@ -1901,6 +1885,14 @@ elif [ "$1" = "-N" ]; then
echo "Current mode is FUNcube"
echo "Next mode is Repeater"
/home/pi/CubeSatSim/config -e
elif [ "$1" = "e" ]; then
echo "Current mode is Repeater"
echo "Next mode is Pacsat"
/home/pi/CubeSatSim/config -G
elif [ "$1" = "p" ]; then
echo "Current mode is Pacsat"
echo "Next mode is APRS"
/home/pi/CubeSatSim/config -a
else
echo "Unknown mode"
fi
@ -1918,7 +1910,6 @@ elif [ "$1" = "-N" ]; then
elif [ "$1" = "-U" ]; then
echo
echo "Changing the Random Simulated Failure setting"
echo
@ -2109,7 +2100,7 @@ elif [ "$1" = "-u" ]; then
elif [ "$1" = "-G" ]; then
echo "Changing to PacSatSim mode"
echo "Changing to Pacsat mode"
value=`cat /home/pi/CubeSatSim/.mode`
echo "$value" > /dev/null
set -- $value
@ -2139,7 +2130,7 @@ elif [ "$1" = "-G" ]; then
elif [ "$1" = "-I" ]; then
echo "Changing to PacSat Ground Station mode"
echo "Changing to Pacsat Ground Station mode"
echo
echo "Run the Pacsat Ground Station in the Desktop"
value=`cat /home/pi/CubeSatSim/.mode`
@ -2171,8 +2162,7 @@ elif [ "$1" = "-I" ]; then
elif [ "$1" = "-k" ]; then
echo
echo "Reset PacSatSim configuration"
echo "Reset Pacsat configuration"
echo
sudo systemctl stop pacsatsim &>/dev/null
sudo rm -r /home/pi/PacSat
@ -2181,7 +2171,6 @@ elif [ "$1" = "-k" ]; then
elif [ "$1" = "-K" ]; then
echo
echo "Setting the Doppler frequency shift mode setting"
echo
@ -2196,7 +2185,7 @@ elif [ "$1" = "-K" ]; then
if [ "${14}" = "sim" ] ; then
echo "Simulated Doppler frequency shift mode enabled"
elif [ "${14}" = "rig" ] ; then
echo "rigctld Doppler frequency shift mode enabled"
echo "Radio Control Doppler frequency shift mode enabled"
else
echo "Doppler frequency shift is OFF"
fi
@ -2211,13 +2200,13 @@ elif [ "$1" = "-K" ]; then
if [ "$sim" = "y" ] || [ "$sim" = "yes" ] ; then
doppler="yes"
echo "Do you want simulated Doppler shift or rigctld Doppler (sim/rig)"
echo "Do you want Simulated Doppler shift or Radio Control Doppler (sim/rig)"
read doppler
if [ "$doppler" = "sim" ] ; then
echo "Simulated Doppler frequency shift mode enabled"
elif [ "$doppler" = "rig" ] ; then
echo "rigctld Doppler frequency shift mode enabled"
echo "Radio Control Doppler frequency shift mode enabled"
else
doppler="no"
echo "sim or rig not entered. Doppler frequency shift is OFF"
@ -2257,7 +2246,6 @@ elif [ "$1" = "-K" ]; then
elif [ "$1" = "-V" ]; then
echo
echo "Changing the maxcpus setting"
echo
@ -2371,8 +2359,8 @@ elif [ "$1" = "-h" ]; then
echo " -n Change to Transmit Commands mode"
echo " -e Change to Repeater mode"
echo " -j Change to FUNcube mode"
echo " -G Change to PacSatSim mode"
echo " -I Change to PacSat Ground Station mode"
echo " -G Change to Pacsat mode"
echo " -I Change to Pacsat Ground Station mode"
echo " -i Restart CubeSatsim software"
echo " -c Change the CALLSIGN in the configuration file sim.cfg"
echo " -t Change the Simulated Telemetry setting in sim.cfg"
@ -2400,7 +2388,7 @@ elif [ "$1" = "-h" ]; then
echo " -U Change the random failure mode setting"
echo " -N Set next mode or failure"
echo " -u Change gpsd state"
echo " -k Reset the PacSatSim Configuration"
echo " -k Reset the Pacsat Configuration"
echo " -K Change the Doppler frequency shift setting"
echo " -V Set the maximum CPUs"
echo " -w Show PiOS boot files"

Write Preview
Loading…
Cancel
Save

Powered by TurnKey Linux.