5.8 KiB

Raw Blame History Unescape Escape

Monitoring and reports

TCP report channel

When REPORTS is enabled in the server config, the ADN DMR Peer Server listens on TCP and report clients (typically adn-monitor) connect and receive:

HELLO (opcode 0xFF) — JSON sent first on each new TCP connection by new-adn-server (adn-server): server name, package version, protocol number, and features (e.g. INGRESS, END_TX_FORWARD, PUSH_ON_CONNECT). Lets the monitor tag the session as v2 before any pickled payloads.
CONFIG_SND / BRIDGE_SND — pickled snapshots of systems and bridges (sent immediately after HELLO on connect, on CONFIG_REQ / BRIDGE_REQ, on SIGHUP config reload, when a MASTER hotspot registers or disconnects, and on the periodic REPORT_INTERVAL loop).
BRDG_EVENT — text events for calls (GROUP VOICE, PRIVATE VOICE, etc.).

Older stacks (legacy adn-dmr-server-style) may omit HELLO. adn-monitor waits up to ADN_CONNECTION.HELLO_TIMEOUT_MS (see Monitor configuration); if no HELLO arrives, it assumes legacy reporting.

The monitor decodes these messages, updates its CTABLE / BTABLE, and (when MySQL is configured) persists Last Heard / statistics.

Full stack: ADN Monitor overview (Python monitor, WebSocket, PHP API, optional proxy and self-service).

Report channel log lines (`adn-monitor` logger)

Python uses the logger name adn-monitor (see LOGGER.LOG_FILE in adn-monitor.yaml). Typical INFO lines for the TCP report client:

Log prefix / text	Meaning
`(REPORT) Connection to report server established`	TCP session up; HELLO wait timer starts (`HELLO_TIMEOUT_MS`).
`(REPORT) stringReceived: HELLO opcode=ff …`	Raw HELLO frame seen on the wire.
`(REPORT) HELLO received: mode=v2 server=… version=… features=…`	HELLO JSON parsed; session treated as v2 (new-adn-server).
`(REPORT) No HELLO in …s; assuming legacy adn-dmr-server …`	No `0xFF` before timeout — monitor keeps legacy mode (pickled CONFIG/BRIDGE only). Expected if the peer is classic `adn-dmr-server`. If you know the server is new-adn-server but still see this, check `ADN_IP` / `ADN_PORT`, `REPORTS.REPORT_CLIENTS`, firewalls, or raise `HELLO_TIMEOUT_MS` slightly on very slow links.
`(REPORT) CONFIG applied: …` / `(REPORT) BRIDGES applied: …`	Pickled snapshots applied to CTABLE/BTABLE.

At WARNING: invalid HELLO JSON ((REPORT) HELLO payload not valid JSON), or Invalid GLOBAL.TIMEZONE if GLOBAL.TIMEZONE in YAML is not a valid IANA name.

OpenBridge monitor semantics

GROUP VOICE,INGRESS,RX — first sight of a stream on an OpenBridge leg (debug; full visibility in logs).
GROUP VOICE,START,RX — canonical start after loop control (feeds dashboard chips / CTABLE).
GROUP VOICE,END,… — call end; RX/TX variants depending on direction.

The dashboard shows operational state from START (canonical); the Monitor log shows INGRESS plus START for troubleshooting mesh duplicates.

Log file rotation (logrotate)

After logrotate renames or moves a log file (common pattern: create so the old path is rotated away and a new empty file appears at the configured path), the process may still hold an open file descriptor on the previous inode. Logs then appear “missing” from the current path until the process reopens its file handlers.

Recommended: use create (not copytruncate when the service supports signaling): copytruncate can race with concurrent writes and drop lines; WatchedFileHandler avoids signals but adds overhead per log record.

These processes handle SIGUSR2 by reopening logging.FileHandler streams only — they do not reload YAML, databases, or Twisted configuration.

Process	Typical config keys
`adn-server` / `adn-parrot`	`LOGGER.LOG_FILE` (see `adn-server.example.yaml`)
`adn-proxy`	`LOG.PATH` + `LOG.LOG_FILE` in `adn-proxy.yaml`
`adn-monitor`	`LOG.PATH` + `LOG.LOG_FILE` in `adn-monitor.yaml`

Example /etc/logrotate.d/adn fragment (adjust paths and service names):

/var/log/adn-server/adn-server.log {
    weekly
    rotate 12
    compress
    delaycompress
    missingok
    notifempty
    create 0640 adn adn
    postrotate
        /bin/kill -USR2 "$(systemctl show adn-server.service -p MainPID --value)" 2>/dev/null || true
    endscript
}

Repeat postrotate with kill -USR2 for adn-parrot, adn-proxy, and adn-monitor units if those logs are rotated on the same host. Use the correct PID (systemd MainPID, a pidfile, or kill targeting the process you manage).

Requirements

Network reachability from the monitor host to the server’s REPORTS.REPORT_PORT (and the server’s REPORT_CLIENTS allow list must include the monitor if used).
adn-monitor ADN_CONNECTION.ADN_IP / ADN_PORT must match the server — see Monitor configuration.

Self-service and hotspots

Operators editing device options from the dashboard use the self-service flow (MySQL Clients, proxy RPTO). That is documented under Self-service; it is not part of the peer server binary alone. For hotspot proxy configuration (PROXY in adn-proxy.yaml by default), how it binds to the peer server UDP port range, and how the process starts, see Hotspot proxy.

5.8 KiB Raw Blame History Unescape Escape