74 Commits (cee085d87072378920eaa92e2f4ca6656d45b89b)

Author	SHA1	Message	Date
Bryan Biedenkapp	8b9757e52c	cleanup unused and unnecessary code;	4 years ago
Bryan Biedenkapp	f22f1e76d1	add preliminary work for eventual FNE STC (Site Trunk Controller) support;	4 years ago
Bryan Biedenkapp	170424e44c	correct display of timing for FDMA preambles; do not send nulls after a PDU ack;	4 years ago
Bryan Biedenkapp	dfa32ae786	enhance setup mode;	4 years ago
Bryan Biedenkapp	38756799e1	fix issue where selected channel number with a negative tx offset may result in a Rx frequency that may be below the base frequency (all frequencies must be channelized properly and be must be greater then the base frequency); fix SN-DATA_CHN_ANN_EXP Rx channel number calculation;	4 years ago
Bryan Biedenkapp	ea3be21cb2	fix bug where the PTY port would be treated as invalid;	4 years ago
Bryan Biedenkapp	e68e387ef2	fix issue where MBFs weren't being disabled; fix null reference check; clean up code;	4 years ago
Bryan Biedenkapp	4239d21a2b	initial experimental support for DFSI communication via DVM modem serial interface (DFSI support is disabled from compilation entirely by default, the -DENABLE_DFSI_SUPPORT compiler directive is required to enable it);	4 years ago
Bryan Biedenkapp	468079dcc8	make Windows Visual Studio project compile again; modify some dynamic memory allocations to work in C90 standard (damn it MSVC...);	4 years ago
Bryan Biedenkapp	34f8b0407f	add experimental support for split NAC, this change adds a new txNAC configuration option to set the transmit NAC;	4 years ago
Bryan Biedenkapp	cdfac07224	implement new logic to store some tuning parameters in the modem flash as a backup to config.yml (if this is buggy use ignoreModemConfigArea in the config.yml to disable);	4 years ago
Bryan Biedenkapp	4f12bb575a	add support for "pty" port type (reuses uart fields for pty file and speed);	4 years ago
Bryan Biedenkapp	f5cb11b467	correct issue where TDULC for Call Termination was incorrectly being sent while in simplex mode (should fix issue #3); add configuration option called "simplexSameFrequency" to control whether simplex operation takes place on a split frequency pair or a single frequency; fix issue where P25 nulls may be incorrectly transmitted in simplex mode;	4 years ago
Bryan Biedenkapp	cdf53cc9ad	initial commit for using flash storage on the modem as a backup for critical tuning data (this is incomplete, it will READ/WRITE/ERASE data, but won't parse it yet...);	4 years ago
Bryan Biedenkapp	e931d8d26e	remove standalone P25 DataRspHeader class and merge it into DataHeader; further enhance the P25 DataHeader to better match the TIA spec; clean up some code and variable references;	4 years ago
Bryan Biedenkapp	28c0d383d5	bump copyright dates;	4 years ago
Bryan Biedenkapp	6277759da0	limit RCON password to 64 characters; fix issue where dedicated control channels in VOC mode would ignore network traffic;	4 years ago
Bryan Biedenkapp	dd5bfa235b	continue implementing DFSI; remove some header information (it was included incorrectly some cases);	4 years ago
Bryan Biedenkapp	7d949c07d2	disallow CW when in a dedicated control configuration;	4 years ago
Bryan Biedenkapp	de33a4da5d	fix issue saving the ADF7021 gain mode; fix issue where calibration may lock up when the modem doesn't respond in a timely fashion during initialization;	4 years ago
Bryan Biedenkapp	d09112ef04	add hidden option to Rx DMR activation bursts during cal;	4 years ago
Bryan Biedenkapp	d2ed457109	make clearer log messages in the case of coding errors such as TSBK Trellis or CRC errors; allow CRC TSDU errors to be warnings in calibration mode;	4 years ago
Bryan Biedenkapp	3916bf4e99	hide values irrelevant to hotspots when a hotspot is in use;	4 years ago
Bryan Biedenkapp	3615ae2e04	display more data in calibration mode; fix issue where the modem wasn't clocked after issuing a getStatus during calibration startup; fix issue where calibration would not reset modem back to idle after calibration quit was issued;	4 years ago
Bryan Biedenkapp	ed19ec8f51	implement support to set the ADF7021 hotspot Rx gain;	4 years ago
Bryan Biedenkapp	4267cf31f5	add some extra verbose logging to TSBK; fix fixed string handling;	4 years ago
Bryan Biedenkapp	afff645320	fix incorrect location of mode check for hotspots;	4 years ago
Bryan Biedenkapp	0058e1ab54	fix compiler warnings about exception polymorhism; enforce some fixed mode rules for hotspots; fix potential buffer overflow;	4 years ago
Bryan Biedenkapp	fefd4ce4ad	save Rx/Tx tuning data for hotspots;	4 years ago
Bryan Biedenkapp	594e35dca2	fix typo;	4 years ago
Bryan Biedenkapp	c82bc4d53e	fix issue not pasing dump TSBK boolean; simplify P25 CC data stream generation; fix issue getting status data from modem before displaying calibration help; display hotspot engineering status data; remove p25 correlation count from hotspot;	4 years ago
Bryan Biedenkapp	a441d468c6	add support for adjusting the discriminator BW and post demod BW for hotspots;	4 years ago
Bryan Biedenkapp	c0bac0024a	whoops fix issue not saving channel number after calculation;	4 years ago
Bryan Biedenkapp	08dd49d51f	fix incorrect handling of channel number as decimal in setup; enhance setup to make it more comprehensive (essentially all "system" configuration parameters can be modified in setup mode); add support to calibration to set the FDMA preambles, P25 correlation count, DMR Rx Delay as well as setting the Rx and Tx frequency offsets;	4 years ago
Bryan Biedenkapp	d778367583	make MSVS compiler happy about W4834, we don't care about [[nodiscard]]; fix bad handling of argument strings and buffer deletions in RemoteControl; implement support for DMR CC dedicated and DMR CC broadcast RCON commands; fix converting from float to uint32_t, we know about the precision loss;	4 years ago
Bryan Biedenkapp	3838c4d63e	Merge pull request #1 from jelimoore/master ... Add frequency offset logic	4 years ago
Bryan Biedenkapp	a4a7f823d7	cleanup setup utility mode; fix issue with \r\n for interactive console; clamp DMR color code and P25 NAC values properly during host startup;	4 years ago
Bryan Biedenkapp	8454ea9ea6	implement a "setup" mode allowing the channel LCN information to be much more easily set;	4 years ago
Bryan Biedenkapp	e3e8d4c6fe	implement support to send RF params in calibration mode;	4 years ago
Nat Moore	3575a295ec	add offset setting + fix build errors	4 years ago
Bryan Biedenkapp	ba1896968a	port upstream changes manually from https://github.com/jelimoore/dvmhost ceb967b3c9b519a22c3ec4d5cfe10f44cc413c01; add support to set rf power from configuration;	4 years ago
Bryan Biedenkapp	8b5a7ae7ec	add experimental support for DMR TIII (note this will not accept registrations or grant requests);	4 years ago
Bryan Biedenkapp	3fa0cbc150	correct various issues with CW timing and situations where CW may not occur; fix issue with roaming beacons on DMR cycling incorrectly; silence some superfluous warnings;	4 years ago
Bryan Biedenkapp	d37122a253	skip network data processing if mode is not enabled;	4 years ago
Bryan Biedenkapp	2f2d940f6e	update csproj; add logic to ensure system identity is never more then 8 characters;	5 years ago
Bryan Biedenkapp	b7b88b3c84	better support simplex channel selection via iden table; update iden_channel_calc.py helper to support doing conversion to channel no and FROM channel no;	5 years ago
Bryan Biedenkapp	8cf3d10630	slightly alter timing constants in Host to better control CPU usage while idle; remove unnecessary debug code;	5 years ago
Bryan Biedenkapp	525ffd9471	refactor P25 LC; refactor DMR CSBK; better handle scenario where P25 may start without having received a HDU, in this case we will transmit without HDU which would be interpreted by SUs as a late entry condition (better helps encryption sync in some cases);	5 years ago
Bryan Biedenkapp	ce0657206e	fix data types;	5 years ago
Bryan Biedenkapp	13e39b0927	upstream: fix network ports data type;	5 years ago