Bryan Biedenkapp
|
4e77d81699
|
expand the ability to compile in or out entire digital protocols as necessary, by defualt DMR and P25 are included, and NXDN is excluded;
|
4 years ago |
|
Bryan Biedenkapp
|
d587423ede
|
fix warning when compiling AMBEFEC for NXDN regen; correct length to write from host to modem for SET_CONFIG and some other commands;
|
4 years ago |
|
Bryan Biedenkapp
|
cb1aad049c
|
increase CMD_STATUS timeout to 75 ticks this is because when modem debug is enabled some delays may be longer then 25 ticks;
|
4 years ago |
|
Bryan Biedenkapp
|
2f2fee70ba
|
fix some configuration save issues in calibration mode;
|
4 years ago |
|
Bryan Biedenkapp
|
31043bcb53
|
[EXPERIMENTAL] implement support softpot in the firmware;
|
4 years ago |
|
Bryan Biedenkapp
|
a9ab0db32f
|
fix comment typos;
|
4 years ago |
|
Bryan Biedenkapp
|
9ca505ff5c
|
[EXPERIMENTAL] implement support for basic NXDN (requires -DENABLE_NXDN_SUPPORT and the v3 nxdn branch firmware!); implement support for handling v3 firmware;
|
4 years ago |
|
Bryan Biedenkapp
|
9a4906ecac
|
implement marking builds with the Git hash automatically; fix issue with DMR CC not terminating when dvmhost is shutting down; fix issue with DMR CC incorrectly transmitting frames; implement DVM specific opcodes that transmit the Git hash over the air;
|
4 years ago |
|
Bryan Biedenkapp
|
956e9e829b
|
add support to alter the processing tick delays;
|
4 years ago |
|
Bryan Biedenkapp
|
6fd1fe6b76
|
bump copyright dates; add copyright banner at startup;
|
4 years ago |
|
Bryan Biedenkapp
|
91b932c1ea
|
revert modem buffer sizes to pre-reorganization size; implement support to dump the modem status "dumpModemStatus"; refactor LookupTable to use C++ instead of bad C file loading (possible fix for a bad heap corruption problem); implement CC data interval timer for DMR CC;
|
4 years ago |
|
Bryan Biedenkapp
|
66e6787f33
|
clarify buffer overflow message; refactor DMR and P25 code for clarity regarding how the queue buffer for the digital protocols works; refactor P25 control channel processing code into the p25::Control class clock function proper; refactor the naming of the network write functions (the naming was confusing); refactor how queue sizes are calculated, instead of using raw bytes an input, use the number of desired frames as input from config.yml; adjust the internal intermediate modem buffer sizes; implement a short delay between P25 CC packets of ~5ms, this is to give the processor time to handle packets inbetween generating CC data frames; refactor PDU handling, we no longer instantly transmit the registration response, instead following spec transmit it ~1 second after the request; implement and use the modem write immediate support for P25 PDUs and some P25 TSDUs; in the case of P25 voice call late entry, ensure we perform the appropriate queue clear and state resets; refactor and consolidate how the end of frame data is written after a voice call on P25;
|
4 years ago |
|
Bryan Biedenkapp
|
64d0c770a8
|
code cleanup;
|
4 years ago |
|
Bryan Biedenkapp
|
8b9757e52c
|
cleanup unused and unnecessary code;
|
4 years ago |
|
Bryan Biedenkapp
|
f22f1e76d1
|
add preliminary work for eventual FNE STC (Site Trunk Controller) support;
|
4 years ago |
|
Bryan Biedenkapp
|
170424e44c
|
correct display of timing for FDMA preambles; do not send nulls after a PDU ack;
|
4 years ago |
|
Bryan Biedenkapp
|
dfa32ae786
|
enhance setup mode;
|
4 years ago |
|
Bryan Biedenkapp
|
38756799e1
|
fix issue where selected channel number with a negative tx offset may result in a Rx frequency that may be below the base frequency (all frequencies must be channelized properly and be must be greater then the base frequency); fix SN-DATA_CHN_ANN_EXP Rx channel number calculation;
|
4 years ago |
|
Bryan Biedenkapp
|
ea3be21cb2
|
fix bug where the PTY port would be treated as invalid;
|
4 years ago |
|
Bryan Biedenkapp
|
e68e387ef2
|
fix issue where MBFs weren't being disabled; fix null reference check; clean up code;
|
4 years ago |
Bryan Biedenkapp
|
4239d21a2b
|
initial experimental support for DFSI communication via DVM modem serial interface (DFSI support is disabled from compilation entirely by default, the -DENABLE_DFSI_SUPPORT compiler directive is required to enable it);
|
4 years ago |
|
Bryan Biedenkapp
|
468079dcc8
|
make Windows Visual Studio project compile again; modify some dynamic memory allocations to work in C90 standard (damn it MSVC...);
|
4 years ago |
|
Bryan Biedenkapp
|
34f8b0407f
|
add experimental support for split NAC, this change adds a new txNAC configuration option to set the transmit NAC;
|
4 years ago |
|
Bryan Biedenkapp
|
cdfac07224
|
implement new logic to store some tuning parameters in the modem flash as a backup to config.yml (if this is buggy use ignoreModemConfigArea in the config.yml to disable);
|
4 years ago |
|
Bryan Biedenkapp
|
4f12bb575a
|
add support for "pty" port type (reuses uart fields for pty file and speed);
|
4 years ago |
|
Bryan Biedenkapp
|
f5cb11b467
|
correct issue where TDULC for Call Termination was incorrectly being sent while in simplex mode (should fix issue #3); add configuration option called "simplexSameFrequency" to control whether simplex operation takes place on a split frequency pair or a single frequency; fix issue where P25 nulls may be incorrectly transmitted in simplex mode;
|
4 years ago |
|
Bryan Biedenkapp
|
cdf53cc9ad
|
initial commit for using flash storage on the modem as a backup for critical tuning data (this is incomplete, it will READ/WRITE/ERASE data, but won't parse it yet...);
|
4 years ago |
|
Bryan Biedenkapp
|
e931d8d26e
|
remove standalone P25 DataRspHeader class and merge it into DataHeader; further enhance the P25 DataHeader to better match the TIA spec; clean up some code and variable references;
|
4 years ago |
|
Bryan Biedenkapp
|
28c0d383d5
|
bump copyright dates;
|
4 years ago |
|
Bryan Biedenkapp
|
6277759da0
|
limit RCON password to 64 characters; fix issue where dedicated control channels in VOC mode would ignore network traffic;
|
4 years ago |
|
Bryan Biedenkapp
|
dd5bfa235b
|
continue implementing DFSI; remove some header information (it was included incorrectly some cases);
|
4 years ago |
|
Bryan Biedenkapp
|
7d949c07d2
|
disallow CW when in a dedicated control configuration;
|
4 years ago |
|
Bryan Biedenkapp
|
de33a4da5d
|
fix issue saving the ADF7021 gain mode; fix issue where calibration may lock up when the modem doesn't respond in a timely fashion during initialization;
|
4 years ago |
|
Bryan Biedenkapp
|
d09112ef04
|
add hidden option to Rx DMR activation bursts during cal;
|
4 years ago |
|
Bryan Biedenkapp
|
d2ed457109
|
make clearer log messages in the case of coding errors such as TSBK Trellis or CRC errors; allow CRC TSDU errors to be warnings in calibration mode;
|
4 years ago |
|
Bryan Biedenkapp
|
3916bf4e99
|
hide values irrelevant to hotspots when a hotspot is in use;
|
4 years ago |
|
Bryan Biedenkapp
|
3615ae2e04
|
display more data in calibration mode; fix issue where the modem wasn't clocked after issuing a getStatus during calibration startup; fix issue where calibration would not reset modem back to idle after calibration quit was issued;
|
4 years ago |
|
Bryan Biedenkapp
|
ed19ec8f51
|
implement support to set the ADF7021 hotspot Rx gain;
|
4 years ago |
|
Bryan Biedenkapp
|
4267cf31f5
|
add some extra verbose logging to TSBK; fix fixed string handling;
|
4 years ago |
|
Bryan Biedenkapp
|
afff645320
|
fix incorrect location of mode check for hotspots;
|
4 years ago |
|
Bryan Biedenkapp
|
0058e1ab54
|
fix compiler warnings about exception polymorhism; enforce some fixed mode rules for hotspots; fix potential buffer overflow;
|
4 years ago |
|
Bryan Biedenkapp
|
fefd4ce4ad
|
save Rx/Tx tuning data for hotspots;
|
4 years ago |
|
Bryan Biedenkapp
|
594e35dca2
|
fix typo;
|
4 years ago |
|
Bryan Biedenkapp
|
c82bc4d53e
|
fix issue not pasing dump TSBK boolean; simplify P25 CC data stream generation; fix issue getting status data from modem before displaying calibration help; display hotspot engineering status data; remove p25 correlation count from hotspot;
|
4 years ago |
|
Bryan Biedenkapp
|
a441d468c6
|
add support for adjusting the discriminator BW and post demod BW for hotspots;
|
4 years ago |
|
Bryan Biedenkapp
|
c0bac0024a
|
whoops fix issue not saving channel number after calculation;
|
4 years ago |
|
Bryan Biedenkapp
|
08dd49d51f
|
fix incorrect handling of channel number as decimal in setup; enhance setup to make it more comprehensive (essentially all "system" configuration parameters can be modified in setup mode); add support to calibration to set the FDMA preambles, P25 correlation count, DMR Rx Delay as well as setting the Rx and Tx frequency offsets;
|
4 years ago |
|
Bryan Biedenkapp
|
d778367583
|
make MSVS compiler happy about W4834, we don't care about [[nodiscard]]; fix bad handling of argument strings and buffer deletions in RemoteControl; implement support for DMR CC dedicated and DMR CC broadcast RCON commands; fix converting from float to uint32_t, we know about the precision loss;
|
4 years ago |
|
Bryan Biedenkapp
|
3838c4d63e
|
Merge pull request #1 from jelimoore/master
Add frequency offset logic
|
4 years ago |
|
Bryan Biedenkapp
|
a4a7f823d7
|
cleanup setup utility mode; fix issue with \r\n for interactive console; clamp DMR color code and P25 NAC values properly during host startup;
|
4 years ago |
