KB8PMY
/
tinySA
mirror of https://github.com/erikkaashoek/tinySA.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '2d430a4f58'
${ noResults }
tinySA/sa_core.c

1948 lines
51 KiB
Raw Blame History

#include "SI4432.h" // comment out for simulation
int setting_mode = -1; // To force initialzation
int dirty = true;
int scandirty = true;
int setting_attenuate = 0;
int setting_auto_attenuation;
int setting_step_atten;
int setting_rbw = 0;
int setting_average = 0;
int setting_show_stored = 0;
int setting_subtract_stored = 0;
int setting_drive; // 0-7 , 7=+20dBm, 3dB steps
int setting_agc = true;
int setting_lna = false;
int setting_auto_reflevel;
int setting_reflevel;
int setting_scale;
int setting_tracking = false;
int setting_modulation = MO_NONE;
int setting_step_delay = 0;
int setting_frequency_step;
int setting_decay;
int setting_noise;
float actual_rbw = 0;
float setting_vbw = 0;
int setting_tracking_output;
int setting_measurement;
int vbwSteps = 1;
//int setting_spur = 0;
uint32_t minFreq = 0;
uint32_t maxFreq = 520000000;
int setting_refer = -1; // Off by default
const int reffer_freq[] = {30000000, 15000000, 10000000, 4000000, 3000000, 2000000, 1000000};
int in_selftest = false;
void reset_settings(int m)
{
setting_mode = m;
SetScale(10);
SetReflevel(-10);
setting_attenuate = 0;
setting_rbw = 0;
setting_average = 0;
setting_show_stored = 0;
setting_auto_attenuation = true;
setting_subtract_stored = 0;
setting_drive=12;
setting_step_atten = 0; // Only used in low output mode
setting_agc = true;
setting_lna = false;
setting_tracking = false;
setting_modulation = MO_NONE;
setting_step_delay = 0;
setting_vbw = 0;
setting_auto_reflevel = true; // Must be after SetReflevel
setting_decay=20;
setting_noise=5;
setting_tracking_output = false;
trace[TRACE_STORED].enabled = false;
trace[TRACE_TEMP].enabled = false;
setting_measurement = M_OFF;
// setting_spur = 0;
switch(m) {
case M_LOW:
minFreq = 0;
maxFreq = 520000000;
set_sweep_frequency(ST_START, (int32_t) 0);
set_sweep_frequency(ST_STOP, (int32_t) 350000000);
setting_attenuate = 30;
break;
case M_GENLOW:
setting_drive=8;
minFreq = 0;
maxFreq = 520000000;
set_sweep_frequency(ST_CENTER, (int32_t) 10000000);
set_sweep_frequency(ST_SPAN, 0);
break;
case M_HIGH:
minFreq = 240000000;
maxFreq = 960000000;
set_sweep_frequency(ST_START, (int32_t) minFreq);
set_sweep_frequency(ST_STOP, (int32_t) maxFreq);
break;
case M_GENHIGH:
setting_drive=8;
minFreq = 240000000;
maxFreq = 960000000;
set_sweep_frequency(ST_CENTER, (int32_t) 300000000);
set_sweep_frequency(ST_SPAN, 0);
break;
}
for (int i = 0; i< MARKERS_MAX; i++) {
markers[i].enabled = M_DISABLED;
markers[i].mtype = M_NORMAL;
}
markers[0].mtype = M_REFERENCE | M_TRACKING;
markers[0].enabled = M_ENABLED;
dirty = true;
}
void set_refer_output(int v)
{
setting_refer = v;
dirty = true;
}
int get_refer_output(void)
{
return(setting_refer);
}
void set_decay(int d)
{
if (d < 0 || d > 200)
return;
setting_decay = d;
dirty = true;
}
void set_noise(int d)
{
if (d < 2 || d > 50)
return;
setting_noise = d;
dirty = true;
}
void set_measurement(int m)
{
setting_measurement = m;
dirty = true;
}
void SetDrive(int d)
{
setting_drive = d;
dirty = true;
}
void set_tracking_output(int t)
{
setting_tracking_output = t;
dirty = true;
}
void toggle_tracking_output(void)
{
setting_tracking_output = !setting_tracking_output;
dirty = true;
}
void SetModulation(int m)
{
setting_modulation = m;
dirty = true;
}
void SetIF(int f)
{
frequency_IF = f;
dirty = true;
}
int GetMode(void)
{
return(setting_mode);
dirty = true;
}
#define POWER_STEP 0 // Should be 5 dB but appearently it is lower
#define POWER_OFFSET 20
#define SWITCH_ATTENUATION 29
int GetAttenuation(void)
{
if (setting_mode == M_GENLOW) {
if (setting_step_atten)
return ( -(POWER_OFFSET + setting_attenuate - (setting_step_atten-1)*POWER_STEP + SWITCH_ATTENUATION));
else
return ( -POWER_OFFSET - setting_attenuate + (setting_drive & 7) * 3);
}
return(setting_attenuate);
}
void set_auto_attenuation(void)
{
setting_auto_attenuation = true;
setting_attenuate = 30;
}
void set_auto_reflevel(void)
{
setting_auto_reflevel = true;
}
void SetAttenuation(int a)
{
if (setting_mode == M_GENLOW) {
setting_drive = 8; // Start at lowest drive level;
a = a + POWER_OFFSET;
if (a > 0) {
setting_drive++;
a = a - 3;
}
if (a > 0) {
setting_drive++;
a = a - 3;
}
if (a > 0) {
setting_drive++;
a = a - 3;
}
if (a > 0)
a = 0;
if( a > - SWITCH_ATTENUATION) {
setting_step_atten = 0;
} else {
a = a + SWITCH_ATTENUATION;
setting_step_atten = 1;
}
a = -a;
} else {
setting_step_atten = 0;
}
if (a<0)
a = 0;
if (a> 31)
a=31;
// if (setting_attenuate == a)
// return;
setting_attenuate = a;
dirty = true;
}
void SetStorage(void)
{
for (int i=0; i<POINTS_COUNT;i++)
stored_t[i] = actual_t[i];
setting_show_stored = true;
trace[TRACE_STORED].enabled = true;
dirty = true;
}
int GetStorage(void)
{
return(setting_show_stored);
}
void SetClearStorage(void)
{
setting_show_stored = false;
setting_subtract_stored = false;
trace[TRACE_STORED].enabled = false;
dirty = true;
}
void SetSubtractStorage(void)
{
if (!setting_subtract_stored) {
if (!setting_show_stored)
SetStorage();
setting_subtract_stored = true;
} else {
setting_subtract_stored = false;
}
dirty = true;
}
int GetSubtractStorage(void)
{
return(setting_subtract_stored);
}
extern float peakLevel;
void SetPowerLevel(int o)
{
float new_offset = o - peakLevel - setting_attenuate + settingLevelOffset();
if (o != 100) {
if (setting_mode == M_HIGH)
config.high_level_offset = new_offset;
else if (setting_mode == M_LOW)
config.low_level_offset = new_offset;
}
else {
config.low_level_offset = 100;
config.high_level_offset = 100;
}
dirty = true;
}
int settingLevelOffset(void)
{
if (setting_mode == M_HIGH) {
if (config.high_level_offset == 100)
return 0;
return(config.high_level_offset);
}
if (setting_mode == M_LOW) {
if (config.low_level_offset == 100)
return 0;
return(config.low_level_offset);
}
return(0);
}
int level_is_calibrated(void)
{
if (setting_mode == M_HIGH && config.high_level_offset != 100)
return 1;
if (setting_mode == M_LOW && config.low_level_offset != 100)
return 1;
return(0);
}
void SetRBW(int v)
{
setting_rbw = v;
update_rbw();
dirty = true;
}
int GetRBW(void)
{
return(setting_rbw);
}
int GetActualRBW(void)
{
return((int) actual_rbw);
}
#if 0
void SetSpur(int v)
{
// setting_spur = v;
dirty = true;
}
#endif
void SetStepDelay(int d)
{
setting_step_delay = d;
dirty = true;
}
void SetAverage(int v)
{
setting_average = v;
trace[TRACE_TEMP].enabled = (v != 0);
dirty = true;
}
int GetAverage(void)
{
return(setting_average);
}
void ToggleLNA(void)
{
setting_lna = !setting_lna;
dirty = true;
}
void toggle_tracking(void)
{
setting_tracking = !setting_tracking;
dirty = true;
}
int GetExtraVFO(void)
{
return(setting_tracking);
}
int GetLNA(void)
{
return(setting_lna);
}
void ToggleAGC(void)
{
setting_agc = !setting_agc;
dirty = true;
}
int GetAGC(void)
{
return(setting_agc);
}
void SetReflevel(int level)
{
setting_reflevel = (level / setting_scale) * setting_scale;
set_trace_refpos(0, NGRIDY - level / get_trace_scale(0));
set_trace_refpos(1, NGRIDY - level / get_trace_scale(0));
set_trace_refpos(2, NGRIDY - level / get_trace_scale(0));
dirty = true;
}
//int GetRefpos(void) {
// return (NGRIDY - get_trace_refpos(2)) * get_trace_scale(2);
//}
void SetScale(int s) {
setting_scale = s;
set_trace_scale(0, s);
set_trace_scale(1, s);
set_trace_scale(2, s);
}
//int GetScale(void) {
// return get_trace_refpos(2);
//}
void SetMode(int m)
{
if (setting_mode == m)
return;
reset_settings(m);
}
void apply_settings(void)
{
if (setting_step_delay == 0){
if (actual_rbw >142.0) actualStepDelay = 450;
else if (actual_rbw > 75.0) actualStepDelay = 550;
else if (actual_rbw > 56.0) actualStepDelay = 650;
else if (actual_rbw > 37.0) actualStepDelay = 800;
else if (actual_rbw > 18.0) actualStepDelay = 1100;
else if (actual_rbw > 9.0) actualStepDelay = 2000;
else if (actual_rbw > 5.0) actualStepDelay = 3500;
else actualStepDelay = 6000;
} else
actualStepDelay = setting_step_delay;
PE4302_Write_Byte(setting_attenuate * 2);
#if 0
if (setting_modulation == MO_NFM ) {
SI4432_Sel = 1;
SI4432_Write_Byte(0x7A, 1); // Use frequency hopping channel width for FM modulation
} else if (setting_modulation == MO_WFM ) {
SI4432_Sel = 1;
SI4432_Write_Byte(0x7A, 10); // Use frequency hopping channel width for FM modulation
} else {
SI4432_Sel = 1;
SI4432_Write_Byte(0x79, 0); // IF no FM back to channel 0
}
#endif
SetRX(setting_mode);
SI4432_SetReference(setting_refer);
update_rbw();
}
//------------------------------------------
float peakLevel;
float min_level;
uint32_t peakFreq;
int peakIndex;
float temppeakLevel;
int temppeakIndex;
void setupSA(void)
{
SI4432_Init();
PE4302_init();
PE4302_Write_Byte(0);
}
static unsigned long old_freq[2] = { 0, 0 };
void setFreq(int V, unsigned long freq)
{
SI4432_Sel = V;
if (old_freq[V] != freq) {
if (V == 0) {
V = -V;
V = -V;
}
SI4432_Set_Frequency(freq);
old_freq[V] = freq;
}
}
void SetSwitchTransmit(void) {
SI4432_Write_Byte(0x0b, 0x1f);// Set switch to transmit
SI4432_Write_Byte(0x0c, 0x1d);
}
void SetSwitchReceive(void) {
SI4432_Write_Byte(0x0b, 0x1d);// Set switch to receive
SI4432_Write_Byte(0x0c, 0x1f);
}
void SetAGCLNA(void) {
unsigned char v = 0x40;
if (setting_agc) v |= 0x20;
if (setting_lna) v |= 0x10;
SI4432_Write_Byte(0x69, v);
}
void SetRX(int m)
{
switch(m) {
case M_LOW: // Mixed into 0
SI4432_Sel = 0;
SI4432_Receive();
if (setting_step_atten) {
SetSwitchTransmit();
} else {
SetSwitchReceive();
}
SetAGCLNA();
SI4432_Sel = 1;
if (setting_tracking_output)
SetSwitchTransmit();
else
SetSwitchReceive();
// SI4432_Receive(); For noise testing only
SI4432_Transmit(setting_drive);
// SI4432_SetReference(setting_refer);
break;
case M_HIGH: // Direct into 1
// SI4432_SetReference(-1); // Stop reference output
SI4432_Sel = 0; // both as receiver to avoid spurs
SetSwitchReceive();
SI4432_Receive();
SI4432_Sel = 1;
SI4432_Receive();
SetSwitchReceive();
SetAGCLNA();
break;
case M_GENLOW: // Mixed output from 0
SI4432_Sel = 0;
if (setting_step_atten) {
SetSwitchReceive();
} else {
SetSwitchTransmit();
}
SI4432_Transmit(setting_drive);
SI4432_Sel = 1;
if (setting_modulation == MO_EXTERNAL) {
SetSwitchTransmit(); // High input for external LO scuh as tracking output of other tinySA
SI4432_Receive();
} else {
SetSwitchReceive();
SI4432_Transmit(12); // Fix LO drive a 10dBm
}
break;
case M_GENHIGH: // Direct output from 1
SI4432_Sel = 0;
SI4432_Receive();
SetSwitchReceive();
SI4432_Sel = 1;
if (setting_drive < 8) {
SetSwitchReceive();
} else {
SetSwitchTransmit();
}
SI4432_Transmit(setting_drive);
break;
}
SI4432_Sel = 1;
SI4432_Write_Byte(0x73, 0); // Back to nominal offset
SI4432_Write_Byte(0x74, 0);
}
void update_rbw(void)
{
setting_vbw = (setting_frequency_step)/1000.0;
actual_rbw = setting_rbw;
// float old_rbw = actual_rbw;
if (actual_rbw == 0)
actual_rbw = 2*setting_vbw;
if (actual_rbw < 2.6)
actual_rbw = 2.6;
if (actual_rbw > 600)
actual_rbw = 600;
SI4432_Sel = MODE_SELECT(setting_mode);
actual_rbw = SI4432_SET_RBW(actual_rbw);
vbwSteps = ((int)(2 * setting_vbw / actual_rbw));
if (vbwSteps < 1)
vbwSteps = 1;
dirty = true;
}
int binary_search_frequency(int f)
{
int L = 0;
int R = (sizeof frequencies)/sizeof(int) - 1;
int fmin = f - ((int)actual_rbw ) * 1000;
int fplus = f + ((int)actual_rbw ) * 1000;
while (L <= R) {
int m = (L + R) / 2;
if ((int)frequencies[m] < fmin)
L = m + 1;
else if ((int)frequencies[m] > fplus)
R = m - 1;
else
return m; // index is m
}
return -1;
}
#define MAX_MAX 4
int
search_maximum(int m, int center, int span)
{
center = binary_search_frequency(center);
if (center < 0)
return false;
int from = center - span/2;
int found = false;
int to = center + span/2;
int cur_max = 0; // Always at least one maximum
int max_index[4];
if (from<0)
from = 0;
if (to > POINTS_COUNT-1)
to = POINTS_COUNT-1;
temppeakIndex = 0;
temppeakLevel = actual_t[from];
max_index[cur_max] = from;
int downslope = true;
for (int i = from; i <= to; i++) {
if (downslope) {
if (temppeakLevel > actual_t[i]) { // Follow down
temppeakIndex = i; // Latest minimum
temppeakLevel = actual_t[i];
} else if (temppeakLevel + setting_noise < actual_t[i]) { // Local minimum found
temppeakIndex = i; // This is now the latest maximum
temppeakLevel = actual_t[i];
downslope = false;
}
} else {
if (temppeakLevel < actual_t[i]) { // Follow up
temppeakIndex = i;
temppeakLevel = actual_t[i];
} else if (temppeakLevel - setting_noise > actual_t[i]) { // Local max found
found = true;
int j = 0; // Insertion index
while (j<cur_max && actual_t[max_index[j]] >= temppeakLevel) // Find where to insert
j++;
if (j < MAX_MAX) { // Larger then one of the previous found
int k = MAX_MAX-1;
while (k > j) { // Shift to make room for max
max_index[k] = max_index[k-1];
// maxlevel_index[k] = maxlevel_index[k-1]; // Only for debugging
k--;
}
max_index[j] = temppeakIndex;
// maxlevel_index[j] = actual_t[temppeakIndex]; // Only for debugging
if (cur_max < MAX_MAX) {
cur_max++;
}
//STOP_PROFILE
}
temppeakIndex = i; // Latest minimum
temppeakLevel = actual_t[i];
downslope = true;
}
}
}
markers[m].index = max_index[0];
return found;
}
//static int spur_old_stepdelay = 0;
static const unsigned int spur_IF = 433800000;
static const unsigned int spur_alternate_IF = 434000000;
static const int spur_table[] =
{
580000,
961000,
1600000,
1837000, // Real signal
2755000, // Real signal
2760000,
2961000,
4933000,
4960000,
6961000,
6980000,
8267000,
8961000,
10000000,
10960000,
11600000,
16960000,
22960000,
28960000,
/*
0.52
6.96
1.84
2.77
4934
4960
8928
7371
870000,
970000,
1460000,
1610000,
1840000,
2840000,
2890000,
2970000,
4780000,
4810000,
4850000,
4880000,
8100000,
8140000,
10870000,
14880000,
*/
#ifdef IF_AT_4339
780000,
830000,
880000,
949000,
1390000,
1468000,
1830000,
1900000,
2770000,
2840000,
2880000,
4710000,
4780000,
4800000,
4880000,
6510000,
6750000,
6790000,
6860000,
7340000,
8100000,
8200000,
8880000,
// 9970000, 10MHz!!!!!!
10870000,
11420000,
14880000,
16820000,
#endif
};
int binary_search(int f)
{
int L = 0;
int R = (sizeof spur_table)/sizeof(int) - 1;
int fmin = f - ((int)actual_rbw ) * 1000;
int fplus = f + ((int)actual_rbw ) * 1000;
while (L <= R) {
int m = (L + R) / 2;
if (spur_table[m] < fmin)
L = m + 1;
else if (spur_table[m] > fplus)
R = m - 1;
else
return true; // index is m
}
return false;
}
int avoid_spur(int f)
{
// int window = ((int)actual_rbw ) * 1000*2;
// if (window < 50000)
// window = 50000;
if (! setting_mode == M_LOW || frequency_IF != spur_IF || actual_rbw > 300.0)
return(false);
return binary_search(f);
#if 0
f = f + window/2;
for (unsigned int i = 0; i < (sizeof spur_table)/sizeof(int); i++) {
if (f/window == (spur_table[i] + window/2)/window) {
// spur_old_stepdelay = actualStepDelay;
// actualStepDelay += 4000;
binary_search(f);
return true;
}
}
return false;
#endif
}
static int modulation_counter = 0;
char age[POINTS_COUNT];
float perform(bool break_on_operation, int i, int32_t f, int tracking)
{
// long local_IF = (MODE_LOW(setting_mode)?frequency_IF + (int)(actual_rbw < 300.0?setting_spur * 1000 * actual_rbw :0):0);
long local_IF;
if (MODE_HIGH(setting_mode))
local_IF = 0;
else
local_IF = frequency_IF;
if (i == 0 && dirty) {
apply_settings();
scandirty = true;
dirty = false;
}
if (MODE_OUTPUT(setting_mode) && setting_modulation == MO_AM) {
int p = setting_attenuate * 2 + modulation_counter;
PE4302_Write_Byte(p);
if (modulation_counter == 3)
modulation_counter = 0;
else
modulation_counter++;
chThdSleepMicroseconds(250);
} else if (MODE_OUTPUT(setting_mode) && (setting_modulation == MO_NFM || setting_modulation == MO_WFM )) {
SI4432_Sel = 1;
int offset;
if (setting_modulation == MO_NFM ) {
offset = modulation_counter ;
SI4432_Write_Byte(0x73, (offset & 0xff )); // Use frequency hopping channel for FM modulation
SI4432_Write_Byte(0x74, ((offset >> 8) & 0x03 )); // Use frequency hopping channel for FM modulation
}
else {
offset = modulation_counter * 100;
SI4432_Write_Byte(0x73, (offset & 0xff )); // Use frequency hopping channel for FM modulation
SI4432_Write_Byte(0x74, ((offset >> 8) & 0x03 )); // Use frequency hopping channel for FM modulation
}
if (modulation_counter == 2)
modulation_counter = -2;
else
modulation_counter++;
chThdSleepMicroseconds(250);
}
float RSSI = -150.0;
int t = 0;
do {
int lf = (uint32_t)(f + (int)((t * 500 - vbwSteps * 250) * actual_rbw));
if (lf < 0) lf = 0;
if (setting_mode == M_LOW && tracking) {
setFreq (0, frequency_IF + lf - reffer_freq[setting_refer]); // Offset so fundamental of reffer is visible
local_IF = frequency_IF ;
} else if (MODE_LOW(setting_mode)) {
if (setting_mode == M_LOW && !in_selftest && avoid_spur(f)) {
local_IF = spur_alternate_IF;
} else {
local_IF = frequency_IF ;
}
if (setting_mode == M_GENLOW && setting_modulation == MO_EXTERNAL)
local_IF += lf;
setFreq (0, local_IF);
} else
local_IF= 0;
#if 0
if (lf >11000000 || lf < 9000000) {
lf = lf;
break;
}
#endif
setFreq (1, local_IF + lf);
if (MODE_OUTPUT(setting_mode)) // No substepping in output mode
return(0);
float signal_path_loss;
if (setting_mode == M_LOW)
signal_path_loss = -9.5; // Loss in dB, -9.5 for v0.1, -12.5 for v0.2
else
signal_path_loss = 7; // Loss in dB (+ is gain)
float subRSSI = SI4432_RSSI(lf, MODE_SELECT(setting_mode))+settingLevelOffset()+ setting_attenuate - signal_path_loss;
if (RSSI < subRSSI)
RSSI = subRSSI;
t++;
if (operation_requested && break_on_operation) // output modes do not step.
break; // abort
} while (t < vbwSteps);
return(RSSI);
}
#define MAX_MAX 4
int16_t max_index[MAX_MAX];
int16_t cur_max = 0;
// main loop for measurement
static bool sweep(bool break_on_operation)
{
float RSSI;
int16_t downslope = true;
palClearPad(GPIOC, GPIOC_LED);
temppeakLevel = -150;
float temp_min_level = 100;
// spur_old_stepdelay = 0;
//again:
for (int i = 0; i < sweep_points; i++) {
RSSI = perform(break_on_operation, i, frequencies[i], setting_tracking);
// back to toplevel to handle ui operation
if (operation_requested && break_on_operation)
return false;
if (MODE_OUTPUT(setting_mode) && setting_modulation == MO_NONE) {
osalThreadSleepMilliseconds(10);
}
if (MODE_INPUT(setting_mode)) {
// if (setting_spur == 1) { // First pass
// temp_t[i] = RSSI;
// continue; // Skip all other processing
// }
// if (setting_spur == -1) // Second pass
// RSSI = ( RSSI < temp_t[i] ? RSSI : temp_t[i]); // Minimum of two passes
temp_t[i] = RSSI;
if (setting_subtract_stored) {
RSSI = RSSI - stored_t[i] ;
}
// stored_t[i] = (SI4432_Read_Byte(0x69) & 0x0f) * 3.0 - 90.0; // Display the AGC value in thestored trace
if (scandirty || setting_average == AV_OFF) {
actual_t[i] = RSSI;
age[i] = 0;
} else {
switch(setting_average) {
case AV_MIN: if (actual_t[i] > RSSI) actual_t[i] = RSSI; break;
case AV_MAX_HOLD: if (actual_t[i] < RSSI) actual_t[i] = RSSI; break;
case AV_MAX_DECAY:
if (actual_t[i] < RSSI) {
actual_t[i] = RSSI;
age[i] = 0;
} else {
if (age[i] > setting_decay)
actual_t[i] -= 0.5;
else
age[i] += 1;
}
break;
case AV_4: actual_t[i] = (actual_t[i]*3 + RSSI) / 4.0; break;
case AV_16: actual_t[i] = (actual_t[i]*15 + RSSI) / 16.0; break;
}
}
#if 1
// START_PROFILE
if (i == 0) {
cur_max = 0; // Always at least one maximum
temppeakIndex = 0;
temppeakLevel = actual_t[i];
max_index[0] = 0;
downslope = true;
}
if (downslope) {
if (temppeakLevel > actual_t[i]) { // Follow down
temppeakIndex = i; // Latest minimum
temppeakLevel = actual_t[i];
} else if (temppeakLevel + setting_noise < actual_t[i] ) { // Local minimum found
temppeakIndex = i; // This is now the latest maximum
temppeakLevel = actual_t[i];
downslope = false;
}
} else {
if (temppeakLevel < actual_t[i]) { // Follow up
temppeakIndex = i;
temppeakLevel = actual_t[i];
} else if (actual_t[i] < temppeakLevel - setting_noise) { // Local max found
int j = 0; // Insertion index
while (j<cur_max && actual_t[max_index[j]] >= temppeakLevel) // Find where to insert
j++;
if (j < MAX_MAX) { // Larger then one of the previous found
int k = MAX_MAX-1;
while (k > j) { // Shift to make room for max
max_index[k] = max_index[k-1];
// maxlevel_index[k] = maxlevel_index[k-1]; // Only for debugging
k--;
}
max_index[j] = temppeakIndex;
// maxlevel_index[j] = actual_t[temppeakIndex]; // Only for debugging
if (cur_max < MAX_MAX) {
cur_max++;
}
//STOP_PROFILE
}
temppeakIndex = i; // Latest minimum
temppeakLevel = actual_t[i];
downslope = true;
}
}
}
#else
if (frequencies[i] > 1000000) {
if (temppeakLevel < actual_t[i]) {
temppeakIndex = i;
temppeakLevel = actual_t[i];
}
}
#endif
if (temp_min_level > actual_t[i])
temp_min_level = actual_t[i];
}
// if (setting_spur == 1) {
// setting_spur = -1;
// goto again;
// } else if (setting_spur == -1)
// setting_spur = 1;
if (scandirty) {
scandirty = false;
draw_cal_status();
}
if (!in_selftest && setting_mode == M_LOW && setting_auto_attenuation && max_index[0] > 0) {
if (actual_t[max_index[0]] - setting_attenuate < -32 && setting_attenuate >= 10) {
setting_attenuate -= setting_scale;
redraw_request |= REDRAW_CAL_STATUS;
dirty = true; // Must be above if(scandirty!!!!!)
} else if (actual_t[max_index[0]] - setting_attenuate > -18 && setting_attenuate <= 20) {
setting_attenuate += setting_scale;
redraw_request |= REDRAW_CAL_STATUS;
dirty = true; // Must be above if(scandirty!!!!!)
}
}
if (!in_selftest && MODE_INPUT(setting_mode) && setting_auto_reflevel && max_index[0] > 0) {
if (actual_t[max_index[0]] > setting_reflevel - setting_scale/2) {
SetReflevel(setting_reflevel + setting_scale);
redraw_request |= REDRAW_CAL_STATUS;
dirty = true; // Must be above if(scandirty!!!!!)
} else if (temp_min_level < setting_reflevel - 9 * setting_scale - 2 && actual_t[max_index[0]] < setting_reflevel - setting_scale * 3 / 2) {
SetReflevel(setting_reflevel - setting_scale);
redraw_request |= REDRAW_CAL_STATUS;
dirty = true; // Must be above if(scandirty!!!!!)
} else if (temp_min_level > setting_reflevel - 9 * setting_scale + setting_scale + 2) {
SetReflevel(setting_reflevel + setting_scale);
redraw_request |= REDRAW_CAL_STATUS;
dirty = true; // Must be above if(scandirty!!!!!)
}
}
#if 1
if (MODE_INPUT(setting_mode)) {
int i = 0;
int m = 0;
while (i < cur_max) { // For all maxima found
while (m < MARKERS_MAX) {
if (markers[m].enabled && markers[m].mtype & M_TRACKING) { // Available marker found
markers[m].index = max_index[i];
markers[m].frequency = frequencies[markers[m].index];
m++;
break; // Next maximum
}
m++; // Try next marker
}
i++;
}
while (m < MARKERS_MAX) {
if (markers[m].enabled && markers[m].mtype & M_TRACKING) { // More available markers found
markers[m].index = 0; // Enabled but no max
markers[m].frequency = frequencies[markers[m].index];
}
m++; // Try next marker
}
#ifdef __MEASURE__
if (setting_measurement == M_IMD && markers[0].index > 10) {
markers[1].enabled = search_maximum(1, frequencies[markers[0].index]*2, 8);
markers[2].enabled = search_maximum(2, frequencies[markers[0].index]*3, 12);
markers[3].enabled = search_maximum(3, frequencies[markers[0].index]*4, 16);
} else if (setting_measurement == M_OIP3 && markers[0].index > 10 && markers[1].index > 10) {
int l = markers[0].index;
int r = markers[1].index;
if (r < l) {
l = markers[1].index;
r = markers[0].index;
}
} else if (setting_measurement == M_PHASE_NOISE && markers[0].index > 10) {
markers[1].index = markers[0].index + (setting_mode == M_LOW ? 290/4 : -290/4); // Position phase noise marker at requested offset
} else if (setting_measurement == M_STOP_BAND && markers[0].index > 10) {
markers[1].index = marker_search_left_min(markers[0].index);
if (markers[1].index < 0) markers[1].index = 0;
markers[2].index = marker_search_right_min(markers[0].index);
if (markers[2].index < 0) markers[1].index = POINTS_COUNT - 1;
} else if (setting_measurement == M_PASS_BAND && markers[0].index > 10) {
int t = markers[0].index;
float v = actual_t[t];
while (t > 0 && actual_t[t] > v - 3.0)
t --;
if (t > 0)
markers[1].index = t;
t = markers[0].index;
while (t < POINTS_COUNT - 1 && actual_t[t] > v - 3.0)
t ++;
if (t < POINTS_COUNT - 1 )
markers[2].index = t;
}
#endif
peakIndex = max_index[0];
peakLevel = actual_t[peakIndex];
peakFreq = frequencies[peakIndex];
#else
int peak_marker = 0;
markers[peak_marker].enabled = true;
markers[peak_marker].index = peakIndex;
markers[peak_marker].frequency = frequencies[markers[peak_marker].index];
#endif
min_level = temp_min_level;
#if 0 // Auto ref level setting
int scale = setting_scale;
int rp = GetRepos();
if (scale > 0 && peakLevel > rp && peakLevel - min_level < 8 * scale ) {
SetReflevel((((int)(peakLevel/scale)) + 1) * scale);
}
if (scale > 0 && min_level < rp - 9*scale && peakLevel - min_level < 8 * scale ) {
int new_rp = (((int)((min_level + 9*scale)/scale)) - 1) * scale;
if (new_rp < rp)
SetReflevel(new_rp);
}
#endif
}
// redraw_marker(peak_marker, FALSE);
palSetPad(GPIOC, GPIOC_LED);
return true;
}
//------------------------------- SEARCH ---------------------------------------------
int
marker_search_left_max(int from)
{
int i;
int found = -1;
if (uistat.current_trace == -1)
return -1;
int value = actual_t[from];
for (i = from - 1; i >= 0; i--) {
int new_value = actual_t[i];
if (new_value < value) {
value = new_value;
found = i;
} else if (new_value > value + setting_noise )
break;
}
for (; i >= 0; i--) {
int new_value = actual_t[i];
if (new_value > value) {
value = new_value;
found = i;
} else if (new_value < value - setting_noise )
break;
}
return found;
}
int
marker_search_right_max(int from)
{
int i;
int found = -1;
if (uistat.current_trace == -1)
return -1;
int value = actual_t[from];
for (i = from + 1; i < sweep_points; i++) {
int new_value = actual_t[i];
if (new_value < value) { // follow down
value = new_value;
found = i;
} else if (new_value > value + setting_noise) // larger then lowest value + noise
break; // past the minimum
}
for (; i < sweep_points; i++) {
int new_value = actual_t[i];
if (new_value > value) { // follow up
value = new_value;
found = i;
} else if (new_value < value - setting_noise)
break;
}
return found;
}
#define MINMAX_DELTA 10
int
marker_search_left_min(int from)
{
int i;
int found = from;
if (uistat.current_trace == -1)
return -1;
int value = actual_t[from];
for (i = from - 1; i >= 0; i--) {
int new_value = actual_t[i];
if (new_value > value) {
value = new_value; // follow up
// found = i;
} else if (new_value < value - MINMAX_DELTA )
break; // past the maximum
}
for (; i >= 0; i--) {
int new_value = actual_t[i];
if (new_value < value) {
value = new_value; // follow down
found = i;
} else if (new_value > value + MINMAX_DELTA )
break;
}
return found;
}
int
marker_search_right_min(int from)
{
int i;
int found = from;
if (uistat.current_trace == -1)
return -1;
int value = actual_t[from];
for (i = from + 1; i < sweep_points; i++) {
int new_value = actual_t[i];
if (new_value > value) { // follow up
value = new_value;
// found = i;
} else if (new_value < value - MINMAX_DELTA) // less then largest value - noise
break; // past the maximum
}
for (; i < sweep_points; i++) {
int new_value = actual_t[i];
if (new_value < value) { // follow down
value = new_value;
found = i;
} else if (new_value > value + MINMAX_DELTA) // larger then smallest value + noise
break;
}
return found;
}
// -------------------------- CAL STATUS ---------------------------------------------
const char *averageText[] = { "OFF", "MIN", "MAX", "MAXD", " A 4", "A 16"};
const char *dBText[] = { "1dB/", "2dB/", "5dB/", "10dB/", "20dB/"};
const int refMHz[] = { 30, 15, 10, 4, 3, 2, 1 };
void draw_cal_status(void)
{
#define BLEN 10
char buf[BLEN];
#define YSTEP 8
int x = 0;
int y = OFFSETY;
unsigned int color;
#define XSTEP 40
ili9341_fill(x, y, OFFSETX, HEIGHT, 0x0000);
if (MODE_OUTPUT(setting_mode)) // No cal status during output
return;
if (current_menu_is_form() && !in_selftest)
return;
ili9341_set_background(DEFAULT_BG_COLOR);
int yMax = setting_reflevel;
plot_printf(buf, BLEN, "%ddB", yMax);
buf[5]=0;
if (level_is_calibrated()) {
if (setting_auto_reflevel)
color = DEFAULT_FG_COLOR;
else
color = BRIGHT_COLOR_GREEN;
}
else
color = BRIGHT_COLOR_RED;
ili9341_set_foreground(color);
ili9341_drawstring(buf, x, y);
color = DEFAULT_FG_COLOR;
ili9341_set_foreground(color);
y += YSTEP*2;
plot_printf(buf, BLEN, "%ddB/",(int)setting_scale);
ili9341_drawstring(buf, x, y);
if (setting_auto_attenuation)
color = DEFAULT_FG_COLOR;
else
color = BRIGHT_COLOR_GREEN;
ili9341_set_foreground(color);
y += YSTEP*2;
ili9341_drawstring("Attn:", x, y);
y += YSTEP;
plot_printf(buf, BLEN, "%ddB", setting_attenuate);
buf[5]=0;
ili9341_drawstring(buf, x, y);
if (setting_average>0) {
ili9341_set_foreground(BRIGHT_COLOR_BLUE);
y += YSTEP*2;
ili9341_drawstring("Calc:", x, y);
y += YSTEP;
plot_printf(buf, BLEN, "%s",averageText[setting_average]);
buf[5]=0;
ili9341_drawstring(buf, x, y);
}
#if 0
if (setting_spur) {
ili9341_set_foreground(BRIGHT_COLOR_BLUE);
y += YSTEP*2;
ili9341_drawstring("Spur:", x, y);
y += YSTEP;
plot_printf(buf, BLEN, "ON");
ili9341_drawstring(buf, x, y);
}
#endif
if (setting_rbw)
color = BRIGHT_COLOR_GREEN;
else
color = DEFAULT_FG_COLOR;
ili9341_set_foreground(color);
y += YSTEP*2;
ili9341_drawstring("RBW:", x, y);
y += YSTEP;
plot_printf(buf, BLEN, "%dkHz", (int)actual_rbw);
buf[5]=0;
ili9341_drawstring(buf, x, y);
ili9341_set_foreground(DEFAULT_FG_COLOR);
y += YSTEP*2;
ili9341_drawstring("VBW:", x, y);
y += YSTEP;
plot_printf(buf, BLEN, "%dkHz",(int)setting_vbw);
buf[5]=0;
ili9341_drawstring(buf, x, y);
if (dirty)
color = BRIGHT_COLOR_RED;
else if (setting_step_delay)
color = BRIGHT_COLOR_GREEN;
else
color = DEFAULT_FG_COLOR;
ili9341_set_foreground(color);
y += YSTEP*2;
ili9341_drawstring("Scan:", x, y);
y += YSTEP;
int32_t t = (int)((2* vbwSteps * sweep_points * ( actualStepDelay / 100) )) /10 /* * (setting_spur ? 2 : 1) */; // in mS
if (t>1000)
plot_printf(buf, BLEN, "%dS",(t+500)/1000);
else
plot_printf(buf, BLEN, "%dmS",t);
buf[5]=0;
ili9341_drawstring(buf, x, y);
if (setting_refer >= 0) {
ili9341_set_foreground(BRIGHT_COLOR_RED);
y += YSTEP*2;
ili9341_drawstring("Ref:", x, y);
y += YSTEP;
plot_printf(buf, BLEN, "%dMHz",reffer_freq[setting_refer]/1000000);
buf[5]=0;
ili9341_drawstring(buf, x, y);
}
ili9341_set_foreground(BRIGHT_COLOR_GREEN);
y += YSTEP*2;
if (MODE_LOW(setting_mode))
ili9341_drawstring_7x13("M:L", x, y);
else
ili9341_drawstring_7x13("M:H", x, y);
y = HEIGHT-7 + OFFSETY;
plot_printf(buf, BLEN, "%ddB", (int)(yMax - setting_scale * NGRIDY));
buf[5]=0;
if (level_is_calibrated())
if (setting_auto_reflevel)
color = DEFAULT_FG_COLOR;
else
color = BRIGHT_COLOR_GREEN;
else
color = BRIGHT_COLOR_RED;
ili9341_set_foreground(color);
ili9341_drawstring(buf, x, y);
}
// -------------------- Self testing -------------------------------------------------
enum {
TC_SIGNAL, TC_BELOW, TC_ABOVE, TC_FLAT, TC_MEASURE, TC_SET, TC_END,
};
enum {
TP_SILENT, TPH_SILENT, TP_10MHZ, TP_10MHZEXTRA, TP_10MHZ_SWITCH, TP_30MHZ, TPH_30MHZ
};
#define TEST_COUNT 17
static const struct {
int kind;
int setup;
float center; // In MHz
float span; // In MHz
float pass;
int width;
float stop;
} test_case [TEST_COUNT] =
{// Condition Preparation Center Span Pass Width Stop
{TC_BELOW, TP_SILENT, 0.005, 0.01, 0,0, 0}, // 1 Zero Hz leakage
{TC_BELOW, TP_SILENT, 0.01, 0.01, -30, 0, 0}, // 2 Phase noise of zero Hz
{TC_SIGNAL, TP_10MHZ, 20, 7, -37, 30, -80 }, // 3
{TC_SIGNAL, TP_10MHZ, 30, 7, -32, 30, -80 }, // 4
{TC_BELOW, TP_SILENT, 200, 100, -70, 0, 0}, // 5 Wide band noise floor low mode
{TC_BELOW, TPH_SILENT, 600, 720, -65, 0, 0}, // 6 Wide band noise floor high mode
{TC_SIGNAL, TP_10MHZEXTRA, 10, 8, -13, 55, -60 }, // 7 BPF loss and stop band
{TC_FLAT, TP_10MHZEXTRA, 10, 4, -18, 20, -60}, // 8 BPF pass band flatness
{TC_BELOW, TP_30MHZ, 430, 60, -65, 0, -75}, // 9 LPF cutoff
{TC_SIGNAL, TP_10MHZ_SWITCH,20, 7, -58, 30, -90 }, // 10 Switch isolation
{TC_END, 0, 0, 0, 0, 0, 0},
{TC_MEASURE, TP_30MHZ, 30, 7, -22.5, 30, -70 }, // 12 Measure power level and noise
{TC_MEASURE, TP_30MHZ, 270, 4, -45, 30, -75 }, // 13 Measure powerlevel and noise
{TC_MEASURE, TPH_30MHZ, 270, 4, -45, 30, -65 }, // 14 Calibrate power high mode
{TC_END, 0, 0, 0, 0, 0, 0},
{TC_MEASURE, TP_30MHZ, 30, 1, -20, 30, -70 }, // 16 Measure RBW step time
{TC_END, 0, 0, 0, 0, 0, 0},
};
enum {
TS_WAITING, TS_PASS, TS_FAIL, TS_CRITICAL
};
static const char *(test_text [4]) =
{
"Waiting", "Pass", "Fail", "Critical"
};
static const char *(test_fail_cause [TEST_COUNT]);
static int test_status[TEST_COUNT];
static int show_test_info = FALSE;
static volatile int test_wait = false;
static float test_value;
static void test_acquire(int i)
{
(void)i;
pause_sweep();
#if 0
if (test_case[i].center < 300)
setting_mode = M_LOW;
else
setting_mode = M_HIGH;
#endif
// SetAverage(4);
sweep(false);
// sweep(false);
// sweep(false);
// sweep(false);
plot_into_index(measured);
redraw_request |= REDRAW_CELLS | REDRAW_FREQUENCY;
}
extern void cell_drawstring_5x7(int w, int h, char *str, int x, int y, uint16_t fg);
extern void cell_drawstring_7x13(int w, int h, char *str, int x, int y, uint16_t fg);
void cell_drawstring(char *str, int x, int y);
static char self_test_status_buf[35];
void cell_draw_test_info(int x0, int y0)
{
#define INFO_SPACING 13
// char self_test_status_buf[35];
if (!show_test_info)
return;
int i = -2;
do {
i++;
int xpos = 25 - x0;
int ypos = 50+i*INFO_SPACING - y0;
unsigned int color = RGBHEX(0xFFFFFF);
if (i == -1) {
plot_printf(self_test_status_buf, sizeof self_test_status_buf, "Self test status:");
} else if (test_case[i].kind == TC_END) {
if (test_wait)
plot_printf(self_test_status_buf, sizeof self_test_status_buf, "Touch screen to continue");
else
self_test_status_buf[0] = 0;
} else {
plot_printf(self_test_status_buf, sizeof self_test_status_buf, "Test %d: %s%s", i+1, test_fail_cause[i], test_text[test_status[i]] );
if (test_status[i] == TS_PASS)
color = RGBHEX(0x00FF00);
else if (test_status[i] == TS_CRITICAL)
color = RGBHEX(0xFFFF00);
else if (test_status[i] == TS_FAIL)
color = RGBHEX(0xFF7F7F);
else
color = RGBHEX(0x0000FF);
}
ili9341_set_foreground(color);
cell_drawstring(self_test_status_buf, xpos, ypos);
} while (test_case[i].kind != TC_END);
}
#define fabs(X) ((X)<0?-(X):(X))
int validate_signal_within(int i, float margin)
{
test_fail_cause[i] = "Signal level ";
if (fabs(peakLevel-test_case[i].pass) > 2*margin) {
return TS_FAIL;
}
if (fabs(peakLevel-test_case[i].pass) > margin) {
return TS_CRITICAL;
}
test_fail_cause[i] = "Frequency ";
if (peakFreq < test_case[i].center * 1000000 - 100000 || test_case[i].center * 1000000 + 100000 < peakFreq )
return TS_FAIL;
test_fail_cause[i] = "";
return TS_PASS;
}
int validate_peak_below(int i, float margin) {
return(test_case[i].pass - peakLevel > margin);
}
int validate_below(int tc, int from, int to) {
int status = TS_PASS;
for (int j = from; j < to; j++) {
if (actual_t[j] > stored_t[j] - 5)
status = TS_CRITICAL;
else if (actual_t[j] > stored_t[j]) {
status = TS_FAIL;
break;
}
}
if (status != TS_PASS)
test_fail_cause[tc] = "Above ";
return(status);
}
int validate_flatness(int i) {
volatile int j;
test_fail_cause[i] = "Passband ";
for (j = peakIndex; j < POINTS_COUNT; j++) {
if (actual_t[j] < peakLevel - 3) // Search right -3dB
break;
}
if (j - peakIndex < test_case[i].width)
return(TS_FAIL);
for (j = peakIndex; j > 0; j--) {
if (actual_t[j] < peakLevel - 3) // Search left -3dB
break;
}
if (peakIndex - j < test_case[i].width)
return(TS_FAIL);
test_fail_cause[i] = "";
return(TS_PASS);
}
int validate_above(int tc) {
int status = TS_PASS;
for (int j = 0; j < POINTS_COUNT; j++) {
if (actual_t[j] < stored_t[j] + 5)
status = TS_CRITICAL;
else if (actual_t[j] < stored_t[j]) {
status = TS_FAIL;
break;
}
}
if (status != TS_PASS)
test_fail_cause[tc] = "Below ";
return(status);
}
int test_validate(int i)
{
// draw_all(TRUE);
int current_test_status = TS_PASS;
switch (test_case[i].kind) {
case TC_SET:
if (test_case[i].pass == 0) {
if (test_value != 0)
SetPowerLevel(test_value);
} else
SetPowerLevel(test_case[i].pass);
goto common;
case TC_MEASURE:
case TC_SIGNAL: // Validate signal
common: current_test_status = validate_signal_within(i, 5.0);
if (current_test_status == TS_PASS) { // Validate noise floor
current_test_status = validate_below(i, 0, POINTS_COUNT/2 - test_case[i].width);
if (current_test_status == TS_PASS) {
current_test_status = validate_below(i, POINTS_COUNT/2 + test_case[i].width, POINTS_COUNT);
}
if (current_test_status != TS_PASS)
test_fail_cause[i] = "Stopband ";
}
if (current_test_status == TS_PASS && test_case[i].kind == TC_MEASURE)
test_value = peakLevel;
else
test_value = 0; // Not valid
break;
case TC_ABOVE: // Validate signal above curve
current_test_status = validate_above(i);
break;
case TC_BELOW: // Validate signal below curve
current_test_status = validate_below(i, 0, POINTS_COUNT);
break;
case TC_FLAT: // Validate passband flatness
current_test_status = validate_flatness(i);
break;
}
// Report status
if (current_test_status != TS_PASS || test_case[i+1].kind == TC_END)
test_wait = true;
test_status[i] = current_test_status; // Must be set before draw_all() !!!!!!!!
// draw_frequencies();
// draw_cal_status();
draw_all(TRUE);
resume_sweep();
return current_test_status;
}
void test_prepare(int i)
{
setting_tracking = false; //Default test setup
setting_step_atten = false;
SetAttenuation(0);
switch(test_case[i].setup) { // Prepare test conditions
case TPH_SILENT: // No input signal
SetMode(M_HIGH);
goto common_silent;
case TP_SILENT: // No input signal
SetMode(M_LOW);
common_silent:
set_refer_output(-1);
for (int j = 0; j < POINTS_COUNT; j++)
stored_t[j] = test_case[i].pass;
break;
case TP_10MHZ_SWITCH:
SetMode(M_LOW);
set_refer_output(2);
setting_step_atten = true;
goto common;
case TP_10MHZEXTRA: // Swept receiver
SetMode(M_LOW);
setting_tracking = true; //Sweep BPF
frequency_IF = 434000000; // Center on SAW filters
set_refer_output(2);
goto common;
case TP_10MHZ: // 10MHz input
SetMode(M_LOW);
set_refer_output(2);
common:
for (int j = 0; j < POINTS_COUNT/2 - test_case[i].width; j++)
stored_t[j] = test_case[i].stop;
for (int j = POINTS_COUNT/2 + test_case[i].width; j < POINTS_COUNT; j++)
stored_t[j] = test_case[i].stop;
for (int j = POINTS_COUNT/2 - test_case[i].width; j < POINTS_COUNT/2 + test_case[i].width; j++)
stored_t[j] = test_case[i].pass;
break;
case TP_30MHZ:
SetMode(M_LOW);
set_refer_output(0);
goto common;
case TPH_30MHZ:
SetMode(M_HIGH);
set_refer_output(0);
goto common;
}
setting_auto_attenuation = false;
setting_attenuate = 0;
trace[TRACE_STORED].enabled = true;
SetReflevel(test_case[i].pass+10);
set_sweep_frequency(ST_CENTER, (int32_t)(test_case[i].center * 1000000));
set_sweep_frequency(ST_SPAN, (int32_t)(test_case[i].span * 1000000));
draw_cal_status();
}
extern void menu_autosettings_cb(int item);
extern float SI4432_force_RBW(int i);
int last_spur = 0;
int add_spur(int f)
{
for (int i = 0; i < last_spur; i++) {
if (temp_t[i] == f) {
stored_t[i] += 1;
return stored_t[i];
}
}
if (last_spur < 290) {
temp_t[last_spur] = f;
stored_t[last_spur++] = 1;
}
return 1;
}
void self_test(void)
{
#if 0
in_selftest = true;
reset_settings(M_LOW);
test_prepare(4);
int f; // Start search at 400kHz
// int i = 0; // Index in spur table (temp_t)
float p2, p1, p;
#define FREQ_STEP 3000
SetRBW(FREQ_STEP/1000);
last_spur = 0;
for (int j = 0; j < 10; j++) {
p2 = perform(false, 0, f, false);
vbwSteps = 1;
f += FREQ_STEP;
p1 = perform(false, 1, f, false);
f += FREQ_STEP;
shell_printf("\n\rStarting with %4.2f, %4.2f and IF at %d\n\r", p2, p1, frequency_IF);
f = 400000;
while (f < 100000000) {
p = perform(false, 1, f, false);
#define SPUR_DELTA 6
if ( p2 < p1 - SPUR_DELTA && p < p1 - SPUR_DELTA) {
// temp_t[i++] = f - FREQ_STEP;
shell_printf("Spur of %4.2f at %d with count %d\n\r", p1,(f - FREQ_STEP)/1000, add_spur(f - FREQ_STEP));
}
// else
// shell_printf("%f at %d\n\r", p1,f - FREQ_STEP);
p2 = p1;
p1 = p;
f += FREQ_STEP;
}
}
shell_printf("\n\rTable for IF at %d\n\r", frequency_IF);
for (int j = 0; j < last_spur; j++) {
if ((int)stored_t[j] > 1)
shell_printf("%d, %d\n\r", ((int)temp_t[j])/1000, (int)stored_t[j]);
}
while(1) ;
return;
#elif 0 // RAttenuator test
int local_test_status;
in_selftest = true;
reset_settings(M_LOW);
int i = 15; // calibrate low mode power on 30 MHz;
test_prepare(i);
for (int j= 0; j < 32; j++ ) {
test_prepare(i);
SetAttenuation(j);
test_acquire(i); // Acquire test
local_test_status = test_validate(i); // Validate test
shell_printf("Target %d, actual %f\n\r",j, peakLevel);
}
return;
#elif 0
// RBW step time search
int local_test_status;
in_selftest = true;
reset_settings(M_LOW);
int i = 15; // calibrate low mode power on 30 MHz;
test_prepare(i);
setting_step_delay = 6000;
for (int j= 0; j < 57; j++ ) {
setting_step_delay = setting_step_delay * 4/3;
setting_rbw = SI4432_force_RBW(j);
shell_printf("RBW = %d, ",setting_rbw);
test_prepare(i);
test_acquire(i); // Acquire test
local_test_status = test_validate(i); // Validate test
float saved_peakLevel = peakLevel;
if (peakLevel < -30) {
shell_printf("Peak level too low, abort\n\r");
return;
}
shell_printf("Start level = %f, ",peakLevel);
while (setting_step_delay > 100 && peakLevel > saved_peakLevel - 1) {
setting_step_delay = setting_step_delay * 3 / 4;
// test_prepare(i);
// shell_printf("RBW = %f\n\r",SI4432_force_RBW(j));
test_acquire(i); // Acquire test
local_test_status = test_validate(i); // Validate test
// shell_printf("Step %f, %d",peakLevel, setting_step_delay);
}
setting_step_delay = setting_step_delay * 4 / 3;
shell_printf("End level = %f, step time = %d\n\r",peakLevel, setting_step_delay);
}
return;
#else
int old_IF = frequency_IF;
in_selftest = true;
menu_autosettings_cb(0);
for (int i=0; i < TEST_COUNT; i++) { // All test cases waiting
if (test_case[i].kind == TC_END)
break;
test_status[i] = TS_WAITING;
test_fail_cause[i] = "";
}
show_test_info = TRUE;
int i=0;
while (test_case[i].kind != TC_END) {
frequency_IF = old_IF;
test_prepare(i);
test_acquire(i); // Acquire test
test_status[i] = test_validate(i); // Validate test
if (test_status[i] != TS_PASS) {
wait_user();
}
i++;
}
ili9341_set_foreground(BRIGHT_COLOR_GREEN);
ili9341_drawstring_7x13("Self test complete", 50, 200);
ili9341_drawstring_7x13("Touch screen to continue", 50, 215);
wait_user();
ili9341_clear_screen();
sweep_mode = SWEEP_ENABLE;
show_test_info = FALSE;
set_refer_output(0);
reset_settings(M_LOW);
in_selftest = false;
#endif
}
void reset_calibration(void)
{
SetPowerLevel(100);
}
#define CALIBRATE_RBWS 1
const int power_rbw [5] = { 100, 300, 30, 10, 3 };
void calibrate(void)
{
#ifdef __CALIBRATE__
int local_test_status;
float last_peak_level;
in_selftest = true;
SetPowerLevel(100);
reset_settings(M_LOW);
int i = 11; // calibrate low mode power on 30 MHz;
for (int j= 0; j < CALIBRATE_RBWS; j++ ) {
SetRBW(power_rbw[j]);
test_prepare(i);
test_acquire(i); // Acquire test
local_test_status = test_validate(i); // Validate test
// chThdSleepMilliseconds(1000);
if (local_test_status != TS_PASS) {
ili9341_set_foreground(BRIGHT_COLOR_RED);
ili9341_drawstring_7x13("Calibration failed", 30, 120);
goto quit;
} else {
SetPowerLevel(-22); // Should be -22.5dBm
chThdSleepMilliseconds(1000);
}
}
i = 12; // Measure 270MHz in low mode
SetRBW(100);
test_prepare(i);
test_acquire(i); // Acquire test
last_peak_level = peakLevel;
local_test_status = test_validate(i); // Validate test
chThdSleepMilliseconds(1000);
config.high_level_offset = 0; /// Preliminary setting
i = 13; // Calibrate 270MHz in high mode
for (int j = 0; j < CALIBRATE_RBWS; j++) {
SetRBW(power_rbw[j]);
test_prepare(i);
test_acquire(i); // Acquire test
local_test_status = test_validate(i); // Validate test
if (local_test_status != TS_PASS) {
ili9341_set_foreground(BRIGHT_COLOR_RED);
ili9341_drawstring_7x13("Calibration failed", 30, 120);
goto quit;
} else
SetPowerLevel(last_peak_level);
chThdSleepMilliseconds(1000);
}
ili9341_set_foreground(BRIGHT_COLOR_GREEN);
ili9341_drawstring_7x13("Calibration complete", 30, 120);
quit:
ili9341_drawstring_7x13("Touch screen to continue", 30, 140);
wait_user();
ili9341_clear_screen();
in_selftest = false;
sweep_mode = SWEEP_ENABLE;
set_refer_output(0);
reset_settings(M_LOW);
#endif
}
Reference in new issue View Git Blame Copy Permalink

Powered by TurnKey Linux.