diff --git a/sa_core.c b/sa_core.c
index e1eddb8..3373345 100644
--- a/sa_core.c
+++ b/sa_core.c
@@ -919,7 +919,7 @@ void toggle_normalize(void)
 extern float peakLevel;
 void set_actual_power(float o)              // Set peak level to known value
 {
-  float new_offset = o - peakLevel + get_level_offset();        // calculate offset based on difference between measured peak level and known peak level
+  float new_offset = o - peakLevel + get_level_offset();        //  offset based on difference between measured peak level and known peak level
   if (o == 100) new_offset = 0;
   if (setting.mode == M_HIGH) {
     config.high_level_offset = new_offset;
@@ -1416,9 +1416,9 @@ static const struct {
 //  RBWx10 step_delay  offset_delay spur_gate (value divided by 1000)
   {  8500,       150,           50,      400,   -90},
   {  3000,       150,           50,      200,   -95},
-  {  1000,       300,          100,      100,   -105},
-  {   300,       400,          120,      100,   -110},
-  {   100,       600,          120,      100,   -115},
+  {  1000,       800,          100,      100,   -105},
+  {   300,       800,          120,      100,   -110},
+  {   100,       800,          120,      100,   -115},
   {    30,      1500,          300,      100,   -120},
   {    10,      5000,          600,      100,   -122},
   {     3,     19000,         3000,      100,   -125}
@@ -3534,7 +3534,6 @@ static uint8_t sweep_counter = 0;           // Only used for HW refresh
 static bool sweep(bool break_on_operation)
 {
   float RSSI;
-  int16_t downslope;
 #ifdef __SI4432__
   freq_t agc_peak_freq = 0;
   float agc_peak_rssi = -150;
@@ -3552,9 +3551,7 @@ static bool sweep(bool break_on_operation)
 #ifdef TINYSA4
   palClearLine(LINE_LED);
 #endif
-  downslope = true;             // Initialize the peak search algorithm
-  temppeakLevel = -150;
-  float temp_min_level = 100;
+//  float temp_min_level = 100;
 
   //  spur_old_stepdelay = 0;
   //  shell_printf("\r\n");
@@ -3705,8 +3702,14 @@ static bool sweep(bool break_on_operation)
   }
 
   // -------------------------------- Scan finished, do all postprocessing --------------------
+  float temp_min_level = 100;
+
   if (MODE_INPUT(setting.mode)) {
 
+    int16_t downslope = true;             // Initialize the peak search algorithm
+    temppeakLevel = -150;
+
+
 #ifdef __VBW__
   // ------------------------ do VBW processing ------------------------------
     if (setting.frequency_step) {
@@ -3727,7 +3730,6 @@ static bool sweep(bool break_on_operation)
     }
 #endif
 
-
     for (int i = 0; i < sweep_points; i++) {
 
 #if 0
diff --git a/si4468.c b/si4468.c
index d572af2..f51dc42 100644
--- a/si4468.c
+++ b/si4468.c
@@ -1058,8 +1058,8 @@ static si446x_state_t SI4463_get_state(void)
    uint8_t state = SI4463_get_device_status();
 #else
 
-again:
-   SI4463_wait_for_cts();
+//again:
+//   SI4463_wait_for_cts();
    uint8_t state = getFRR(SI446X_CMD_READ_FRR_B);
 #endif
 #if 0 // Only for debugging
@@ -1551,7 +1551,7 @@ uint16_t force_rbw(int f)
   }
   SI4463_clear_int_status();
   SI4463_short_start_rx();           // This can cause recalibration
-  SI4463_wait_for_cts();
+//  SI4463_wait_for_cts();
   set_RSSI_comp();
 //  prev_band = -1;
   SI4463_RSSI_correction = float_TO_PURE_RSSI(RBW_choices[f].RSSI_correction_x_10 - 1200)/10;  // Set RSSI correction