Fast tune working

sa_core.c

@@ -71,8 +71,13 @@ void update_min_max_freq(void)
     maxFreq = HIGH_MAX_FREQ_MHZ * 1000000;
     break;
   case M_GENHIGH:
+#if 0
     minFreq =  135000000;
     maxFreq = 4290000000U;
+#else
+    minFreq =  850000000;
+    maxFreq = 1150000000U;
+#endif
     break;
   }
 }
@@ -174,7 +179,7 @@ void reset_settings(int m)
     break;
   case M_GENHIGH:
     setting.lo_drive=1;
-    set_sweep_frequency(ST_CENTER, 300000000);
+    set_sweep_frequency(ST_CENTER, (minFreq + maxFreq)/2 );
     set_sweep_frequency(ST_SPAN, 0);
     setting.sweep_time_us = 10*ONE_SECOND_TIME;
     break;
@@ -1459,7 +1464,7 @@ case M_GENHIGH: // Direct output from 1
     SI4432_Transmit(setting.drive);
 #endif
 #ifdef __SI4468__
-    SI4463_init_rx();
+    SI4463_init_tx();
 #endif
     ADF4351_enable(true);
 #ifndef TINYSA4_PROTO
@@ -1481,6 +1486,10 @@ case M_GENHIGH: // Direct output from 1
 
 void update_rbw(void)           // calculate the actual_rbw and the vbwSteps (# steps in between needed if frequency step is largen than maximum rbw)
 {
+  if (!MODE_INPUT(setting.mode)) {
+    vbwSteps = 1;
+    return;
+  }
   if (setting.frequency_step > 0 && MODE_INPUT(setting.mode)) {
     setting.vbw_x10 = (setting.frequency_step)/100;
   } else {
@@ -2079,8 +2088,13 @@ modulation_again:
       } else if (setting.mode == M_HIGH) {
         set_freq (SI4463_RX, lf); // sweep RX, local_IF = 0 in high mode
       } else if (setting.mode == M_GENHIGH) {
-        set_freq (ADF4351_LO, lf); // sweep LO, local_IF = 0 in high mode
-      }
+#if 1                       // Let SI TX only
+        set_freq (SI4463_RX, lf); // sweep RX, local_IF = 0 in high mode
+        local_IF = 0;
+#else
+          set_freq (ADF4351_LO, lf); // sweep LO, local_IF = 0 in high mode
+#endif
+        }
 //      STOP_PROFILE;
 #endif
     }

si4432.c

@@ -2145,7 +2145,7 @@ uint16_t force_rbw(int f)
   SI4463_short_start_rx();           // This can cause recalibration
   SI4463_wait_for_cts();
   set_RSSI_comp();
-  prev_band = -1;
+//  prev_band = -1;
   SI4463_RSSI_correction = float_TO_PURE_RSSI(RBW_choices[f].RSSI_correction_x_10 - 1200)/10;  // Set RSSI correction
   return RBW_choices[f].RBWx10;                                                   // RBW achieved by SI4463 in kHz * 10
 }
@@ -2210,16 +2210,34 @@ void SI4463_set_freq(uint32_t freq)
       my_microsecond_delay(10);
   }
   if ((SI4463_band == prev_band)) {
-    uint8_t data[] = {
+    int vco = 2091 + (((freq - 850000000)/1000) * 492) / 200000;
+
+    if (SI4463_in_tx_mode) {
+      uint8_t data[] = {
+                      0x37,
+                      (uint8_t) R,                   //  R data[4]
+                      (uint8_t) ((F>>16) & 255),     //  F2,F1,F0 data[5] .. data[7]
+                      (uint8_t) ((F>> 8) & 255),     //  F2,F1,F0 data[5] .. data[7]
+                      (uint8_t) ((F    ) & 255),     //  F2,F1,F0 data[5] .. data[7]
+                      (vco>>8) & 0xff,
+                      vco & 0xff,
+                      0x00,
+                      0x32
+      };
+      SI4463_do_api(data, sizeof(data), NULL, 0);
+    } else {
+
+      uint8_t data[] = {
                       0x36,
                       (uint8_t) R,                   //  R data[4]
                       (uint8_t) ((F>>16) & 255),     //  F2,F1,F0 data[5] .. data[7]
                       (uint8_t) ((F>> 8) & 255),     //  F2,F1,F0 data[5] .. data[7]
                       (uint8_t) ((F    ) & 255),     //  F2,F1,F0 data[5] .. data[7]
-                      0x09,
-                      0x66
-    };
-    SI4463_do_api(data, sizeof(data), NULL, 0);
+                      (vco>>8) & 0xff,
+                      vco & 0xff
+      };
+      SI4463_do_api(data, sizeof(data), NULL, 0);
+    }
     SI4463_frequency_changed = true;
 //    SI4463_set_gpio(3,GPIO_LOW);
     return;
@@ -2275,7 +2293,6 @@ void SI4463_set_freq(uint32_t freq)
     };
     SI4463_do_api(data2, sizeof(data2), NULL, 0);
 //    my_microsecond_delay(30000);
-    prev_band = SI4463_band;
   }
 
 
@@ -2305,6 +2322,7 @@ void SI4463_set_freq(uint32_t freq)
   SI4463_wait_for_cts();
 //  SI4463_set_gpio(3,GPIO_LOW);
   SI4463_frequency_changed = true;
+  prev_band = SI4463_band;
 }
 
 void SI4463_init_rx(void)