diff --git a/main.c b/main.c
index dfcb256..7c77006 100644
--- a/main.c
+++ b/main.c
@@ -91,7 +91,7 @@ uint16_t redraw_request = 0; // contains REDRAW_XXX flags
 // Version text, displayed in Config->Version menu, also send by info command
 const char * const info_about[]={
   BOARD_NAME,
-  "2019-2022 Copyright @Erik Kaashoek",
+  "2019-2024 Copyright @Erik Kaashoek",
   "2016-2020 Copyright @edy555",
   "SW licensed under GPL. See: https://github.com/erikkaashoek/tinySA",
   "Version: " VERSION,
@@ -2894,11 +2894,11 @@ void set_freq_boundaries(void) {
   if (max2871) {    // must all be harmonics of 30MHz
     MAX_LO_FREQ         = 6300000000ULL + config.overclock;
     MAX_ABOVE_IF_FREQ   = 4470000000ULL + config.overclock;         // Range to use for below IF
-    MIN_BELOW_IF_FREQ   = 2310000000ULL + config.overclock;         // Range to use for below IF
+    MIN_BELOW_IF_FREQ   = 2430000000ULL + config.overclock;         // Range to use for below IF
   } else {
     MAX_LO_FREQ         = 4350000000ULL + config.overclock;
     MAX_ABOVE_IF_FREQ   = 3030000000ULL + config.overclock;           // Range to use for below IF
-    MIN_BELOW_IF_FREQ   = 2310000000ULL + config.overclock;           // Range to use for below IF
+    MIN_BELOW_IF_FREQ   = 2430000000ULL + config.overclock;           // Range to use for below IF
   }
   set_jump_freq( MAX_ABOVE_IF_FREQ, (config.harmonic_start?config.harmonic_start:ULTRA_MAX_FREQ), MIN_BELOW_IF_FREQ);
 }
diff --git a/sa_core.c b/sa_core.c
index 93b8967..d928316 100644
--- a/sa_core.c
+++ b/sa_core.c
@@ -152,7 +152,7 @@ int max_drive = 18;
 
 #define SL_GENHIGH_LEVEL_MAX    drive_dBm[MAX_DRIVE]
 
-#define SL_GENLOW_LEVEL_MIN    -124
+#define SL_GENLOW_LEVEL_MIN    -115
 #define SL_GENLOW_LEVEL_MAX   -18.5
 #ifdef TINYSA4_4
 #define MAX_ATTENUATE (setting.extra_lna ? 0 : 31.5)
@@ -6250,7 +6250,7 @@ const test_case_t test_case [] =
  TEST_CASE_STRUCT(TC_SIGNAL,    TP_30MHZ_ULTRA, 30,    1,      CAL_LEVEL,    10,     -85),      // 4 Test Ultra mode
 #define TEST_SILENCE 4
  TEST_CASE_STRUCT(TC_BELOW,     TP_SILENT,      200,    100,    -70,    0,      0),         // 5  Wide band noise floor low mode
- TEST_CASE_STRUCT(TC_ABOVE,     TP_30MHZ_DIRECT,990,   10,    -90,    0,      -90),         // 6 Direct path with harmonic
+ TEST_CASE_STRUCT(TC_ABOVE,     TP_30MHZ_DIRECT,900,   10,    -90,    0,      -90),         // 6 Direct path with harmonic
  TEST_CASE_STRUCT(TC_SIGNAL,    TP_10MHZEXTRA,  30,     14,      CAL_LEVEL,    26,     -45),      // 7 BPF loss and stop band
  TEST_CASE_STRUCT(TC_FLAT,      TP_10MHZEXTRA,  30,     14,      -28,    9,     -60),       // 8 BPF pass band flatness
  TEST_CASE_STRUCT(TC_BELOW,     TP_30MHZ,       880,    1,     -95,    0,      -100),       // 9 LPF cutoff
diff --git a/ui.c b/ui.c
index 512ac18..0bde2f6 100644
--- a/ui.c
+++ b/ui.c
@@ -84,7 +84,7 @@ enum {
 
 #define NUMINPUT_LEN 12
 #ifdef FF_USE_LFN
-#define TXTINPUT_LEN (FF_MAX_LFN - 4)
+#define TXTINPUT_LEN (FF_MAX_LFN - 5)
 #else
 #define TXTINPUT_LEN (8)
 #endif
@@ -7917,12 +7917,26 @@ touch_lever_mode_select(int touch_x, int touch_y)
 static int
 touch_marker_select(int touch_x, int touch_y)
 {
+#ifdef TINYSA4
+  int active_markers = 0;
+  for (int i = 0; i<MARKER_COUNT; i++ ) {
+       if (markers[i].enabled)
+         active_markers++;
+  }
+  int max_y = (active_markers>>1) * 15 + 15;
+#endif
   int selected_marker = 0;
+#ifdef TINYSA4
+  if (current_menu_is_form() || touch_x > LCD_WIDTH-MENU_BUTTON_WIDTH || touch_x < 25 || touch_y > max_y)
+    return FALSE;
+  selected_marker = (touch_y/15)<<1;
+#else
   if (current_menu_is_form() || touch_x > LCD_WIDTH-MENU_BUTTON_WIDTH || touch_x < 25 || touch_y > 30)
     return FALSE;
   if (touch_y > 15)
     selected_marker = 2;
-  selected_marker += (touch_x >150 ? 1 : 0);
+#endif
+  selected_marker += (touch_x >(LCD_WIDTH/2)-10 ? 1 : 0);
   for (int i = 0; i < MARKERS_MAX; i++) {
     if (markers[i].enabled) {
       if (selected_marker == 0) {