A capability-gated control that doesn't appear is indistinguishable from
a broken one. Diagnosing "the FEM LNA toggle is missing" on real hardware
required a rebuild, because the caps byte was never surfaced and the app
debug log records nothing in a release build unless logging is enabled.
Adds an "Offband capabilities" row to Device Info showing the raw caps
byte, firmware version code, and which gated features it grants, e.g.
"0x02 (v16) - block". That turned an unexplained missing toggle into a
one-look answer: firmware v16 running, FEM LNA bit clear, client correct.
Also logs the same values at device-info parse for anyone who does have
logging on.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Completes the client half against the firmware as-built (#298):
- Device-info offset 83 carries the FEM LNA state on v16+, appended
unconditionally (reads 0 on non-capable boards). parseFemLnaState is
length-guarded and returns null pre-v16. Byte presence signals firmware
version, not capability — the cap BIT gates the UI.
- 0xC3 reply handler adopts the reported value verbatim: firmware returns
post-apply hardware state, not an echo, so a refused write surfaces as
truth rather than a lie.
- setFemLna / requestFemLnaState no-op unless the capability bit is set,
so a non-capable radio never sees 0xC3 traffic.
- Radio Settings toggle rendered only when the bit is set, driven by
connector state via ListenableBuilder rather than local optimistic
state, so it always shows what the radio reports.
- errCodeUnsupportedCmd documented: a mis-gated request draws [0x01][0x01],
not [0x01][0x06]. Neither is 0xC3-prefixed, so no new error path.
Gating is on the bit alone, never model or version: firmware derives it
from a runtime FEM probe, so two Heltec V4s can legitimately disagree and
rak3401 reports false by design (its SKY66122 gates LNA and PA together).
13 tests. Not hardware-validated — firmware 0xC3 is still on a branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The channel long-press sheet's binary Mute/Unmute tile becomes a
Notifications tile showing the current level, opening a picker with All
messages / Mentions only / Off.
The mode is read and written against the channel's PSK identity via
AppSettings.channelNotifyKey, so it survives a rename and does not follow a
reused slot (#259). Plain ListTiles with a check mark are used rather than
RadioListTile to stay clear of the Radio groupValue deprecation.
Adds channels_notifications / channels_notifyAll / channels_notifyMentionsOnly
/ channels_notifyOff to app_en.arb and regenerates l10n; the other 17 locales
fall back to English and are recorded in untranslated.json.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the DM composer with an "Unblock to message" notice bar when
the contact is blocked, so a block also stops outgoing DMs (previously
only incoming DMs/adverts were suppressed). Inline unblock restores the
composer. Adds block_composerNotice l10n string and documents the
outgoing-DM rule in block-contract-as-built.md §4.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Settings showed the self public key truncated to 16 hex chars + "..." as
plain Text (settings_screen:262/:410), so it couldn't be shared. Show the
full key, make it selectable, and add a copy button beside it.
- _buildInfoRow gains an optional copyValue: renders the value as
SelectableText + a copy IconButton that copies the full key and shows a
"Public key copied" snackbar. Both self-pubkey rows pass the full key.
- New l10n string settings_publicKeyCopied (regenerated localizations +
untranslated.json).
Part of #234.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Connector parses ADD/REMOVE/CLEAR replies; ADD ok=0 (node store full at 32) sets
blockOffloadStoreFull (local stays authoritative), cleared on reconcile. BlockedView
shows a firmware-offload status row when supportsOffbandBlock — 'active', or a
'radio block list full' warning. Adds block_offload* l10n.
Epic B #166 / B5 #180.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
New BlockedView pane (Settings category, after Privacy): lists blocked pubkeys
(contact name when resolvable, else short key) and name-only channel blocks, each
with Unblock; empty state when nothing blocked. App-local; firmware-offload
indicator deferred to Epic B. Adds block_* settings l10n.
Epic A #165 / A6 #173. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Long-press a channel post -> Block sender: resolve the claimed name to known
pubkey(s) and block each (full block across DM+adverts+all channels, multi-device
covered); if unresolved, block the name globally across ALL channels (promotes to
pubkey later, #174). Adds block_* l10n strings. A5 channel surface;
contacts/chat/discovery + unblock still to come.
Epic A #165 / A5 #172. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Offband 0xC1 GPS query: 1-byte request -> RESP 0xC1 ASCII reply
(enabled/detected/active/fix/baud/lat/lon/alt_cm/sats/time), parsed into
OffbandGpsStatus (lat/lon /1e6). New GPS-status section in the Location dialog
(live-fix vs stored banner + coords/sats/alt/time). Validated against RedCreek's
feat/gps-state-query test firmware.
#140: the per-minute GPS poll now uses the lightweight 0xC1 query instead of
CMD_APP_START (which re-walked channels + re-drained messages = the BLE re-init
flood); a live fix updates self-lat/lon. Validated on b42 (APP_START ~1/min ->
~0, 0xC1 polls clean every 60s, channel re-walk gone).
Gemini (fix-then-ship): atomic completer-claim in _handleOffbandGps to shrink
the stale-reply race; full elimination needs a protocol sequence id, but the
poll shares in-flight via the re-entrancy guard and the query button is disabled
during a request, so concurrent requests don't occur in practice. The hardcoded
snackbars Gemini flagged in _editLocation are pre-existing l10n debt, not
introduced here; all new strings are localized.
Closes#135Closes#140
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Parse the device-info reply's readable strings (build date / model / firmware
version, NUL-terminated after the 8-byte header) and show firmwareVersion +
deviceModel in Settings → Device Info. Raw strings are logged on connect.
End-anchored field mapping (deviceInfoFields) keeps the version correct on
partial frames.
Gemini (fix-then-ship): removed the unused deviceBuildDate field/getter (dead
state) — the build date stays in the connect log via the raw strings, and
deviceInfoFields still parses + tests it.
Closes#134
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Reply long-press drops the cursor into the composer (post-frame focus). (#131)
- "Reply with route" sends `@[sender] ↩ N hops · via <path>`, byte-truncated with `…`, Cyr2Lat-aware. (#106)
Gemini (fix-then-ship): the unawaited `sendChannelMessage` in `_sendRouteReply` mirrors the established `_sendMessage` convention — failure surfaces via the visible message's delivery status, not the returned Future; holistic channel-send error handling is tracked in #133 per maintainer decision. O(n^2) path truncation is negligible on the <=160-byte payload; the `w<1` guard is a defensive div-by-zero (pathHashByteWidth is 1-3).
Closes#131Closes#106
Part of #132
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Split the monolithic AppSettingsScreen (reached via a redundant tile->push from the App Settings category) into two embeddable views rendered directly in the shell panes: AppSettingsView (appearance, translation, battery, map, Cyr2Lat, debug) and MessageSettingsView (notifications + message handling, a new top-level 'Message Settings' category after Contacts). Removes the category->tile->separate-screen layer; each category now lands directly on its settings. Deletes app_settings_screen.dart (no remaining refs). Adds settings_messageSettings(+Subtitle) l10n keys (en template; other locales fall back pending the l10n sweep). Card bodies moved verbatim -- behavior preserved.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Added translations for "Send message", "Guest information", and "Guest tools" in Bulgarian, German, Spanish, French, Hungarian, Italian, Japanese, Korean, Dutch, Polish, Portuguese, Russian, Slovak, Slovenian, Swedish, Ukrainian, and Chinese.
- Updated the "Clock synchronization after login" feature subtitle in all affected languages.
- Removed untranslated keys from the untranslated.json file as they have now been localized.
* Add notification rate limiting with privacy-safe debug logging
- Add batching system to prevent notification storms (3s rate limit, 5s batch window)
- Queue rapid notifications and show batch summaries
- Debug logs show device names for adverts, sender/channel for messages (no content leaks)
- Remove unused _maxBatchSize constant
Context: Added after getting notification-flooded while evaluating RF flood management. The irony.
* Update notification_service.dart
I made a mistake and removed this
* Add l10n support for notification strings
Addresses PR #110 review feedback to use the translations system:
- Add notification strings to app_en.arb (plurals for batch summary)
- Update NotificationService to use lookupAppLocalizations()
- Wire locale from MaterialApp to NotificationService
- Regenerate localization files
New strings added (English only, translations needed):
- notification_activityTitle: "MeshCore Activity"
- notification_messagesCount: "{count} message(s)"
- notification_channelMessagesCount: "{count} channel message(s)"
- notification_newNodesCount: "{count} new node(s)"
- notification_newTypeDiscovered: "New {type} discovered"
- notification_receivedNewMessage: "Received new message"
* Add notification string translations for all supported languages
Translated notification_activityTitle, notification_messagesCount,
notification_channelMessagesCount, notification_newNodesCount,
notification_newTypeDiscovered, and notification_receivedNewMessage
to: bg, de, es, fr, it, nl, pl, pt, ru, sk, sl, sv, uk, zh
Includes proper ICU plural forms for Slavic languages (few/many/other)
and Slovenian dual form.
* Apply dart format to notification_service.dart
---------
Co-authored-by: Winston Lowe <wel97459@gmail.com>
These languages had translation files but were missing from the
settings UI. Adds appSettings_languageRu and appSettings_languageUk
strings and corresponding RadioListTile entries.
Fixes missing languages in app settings.
- Added flutter_linkify package to auto-detect and linkify URLs in chat messages.
- Implemented LinkHandler class to manage link tap confirmations and URL launching.
- Updated chat_screen.dart to use Linkify for displaying message text with links.
- Registered url_launcher plugin for handling URL launches across platforms.
- Updated pubspec.yaml and pubspec.lock to include new dependencies.
- Cleaned up untranslated.json by removing unused translations.
- Implement Community model for managing community data, including secret handling and PSK derivation.
- Create CommunityQrScannerScreen for scanning and joining communities via QR codes.
- Develop CommunityStore for persisting community data using SharedPreferences.
- Introduce QrCodeDisplay widget for displaying QR codes with customizable options.
- Add QrScannerWidget for reusable QR code scanning functionality with validation and controls.
- Added `untranslated.json` to track untranslated messages.
- Updated localization keys in various language files to use camelCase format for consistency.
- Modified `neighbours_screen.dart` to reference updated localization keys.