Ben's style rule: no em-dash character in copy, docs, or code comments
(it reads as an AI tell), and the repo is going public. Replaced the
em-dashes in code comments and English UI strings with commas, colons,
or periods, whichever reads best. User-facing strings were hand-tuned
for natural punctuation rather than a blanket comma.
Preserved the lone "no data" glyph placeholders (a standalone dash used
as a not-available indicator in status displays); those are a design
element, not prose.
Regenerated app_localizations*.dart from app_en.arb (the English
fallback for untranslated keys propagates to every locale's generated
file). Non-English ARB translations left untouched.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tapping a DM opens the Path screen; it now shows the RF details the app
was already receiving but discarding:
- SNR: captured from the v3 contact-msg-recv frame (was skipBytes(1)).
Firmware sends (int8)(snr_dB*4), so dB = byte/4.0 (MyMesh.cpp:512) —
the old commented-out code multiplied by 4, which was 16x wrong.
- Path type: firmware sends path_len 0xFF for a direct/routed frame and
the hop count for a flood (MyMesh.cpp:545). The app collapsed 0xFF->0,
colliding "direct" with "flood, 0 hops". Capture the distinction into
Message.isFloodRoute so the Path row reads "direct (routed)" vs
"flood, N hops".
- RSSI: row wired to Message.rssi but left null — the wire byte is a
hardcoded reserved 0 today; populated once firmware ships it (#439).
Message gains snr/rssi/isFloodRoute (nullable, additive, persisted like
rxTime). 10 tests cover scaling, the 0xFF discriminator, and copyWith.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Client half of the coordinated firmware+client change (firmware wadamesh#50,
verified against source).
Part A: handle push code 0x91 (pushCodeChannelsChanged) by re-polling
getChannels(force: true), so channels added/removed on the device appear in the
client without a reconnect.
Part B: read reserved1 bit0 of the V3 contact and channel message frames as an
outgoing flag. A message composed on the device (DM or channel) now renders as
sent-by-me (isOutgoing: true) instead of received. The channel self-echo guard
is bypassed for outgoing so device-composed channel messages are not dropped.
Removed the dead upstream hasPath/path-bytes branch in ChannelMessage.fromFrame
(no firmware, stock or wadamesh, appends path bytes to this frame; verified).
Backward-compatible: old firmware sends 0 (received, as today); an old client
ignores the bit.
Citadel: meshcore-open-p12
Typed model for importable device config profiles (feature #136): WifiConfig,
BrokerConfig (6 slots), region/status-interval, and a ConfigProfile container.
All fields nullable so apply engines write only the keys a profile sets.
Key names + wire encoding mirror the firmware ConfigSchema (transport/auth as
string names, wifi.pwd write-only). ConfigKeys centralizes the key strings so
the parser (#403) and per-device apply engines never hard-code them.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds a KeepScreenAwake controller that holds a wakelock_plus lock while the
setting is on and the app is foregrounded, releasing on background, on toggle
off, and on dispose. Toggle lives in App Settings > Battery (power tradeoff),
defaults OFF, persisted as keep_screen_awake. Strings added for all 18 locales.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reactions stored only a Map<String,int> of emoji to count, so "who
reacted" was unanswerable and MeshCore One's tap-to-see-who had nothing
to show against. This captures the reactor for every reaction, both our
own r: format and the PocketMesh / MeshCore One format.
Data layer only. The tap-a-badge-to-see-who UI is a separate follow-on;
this makes the data available and does not change any screen.
Additive by design. A new reactionSenders field (Map<String,List<String>>,
emoji -> reactor names) sits alongside the existing count map, serialised
under a new JSON key. Both maps are always written. An older build reading
a newer store ignores the unknown key and still gets correct counts from
reactions; it never hits the hard `value as int` cast that would fail the
whole message-list load (the #355 data-loss shape). Records written before
this field load with an empty sender map, so their counts survive with
names simply absent.
- ChannelMessage + Message: new reactionSenders field, constructor,
copyWith
- both stores: serialise the new key; deserialise via a shared
ReactionHelper.reactionSendersFromJson that returns empty for a missing
key and skips malformed entries rather than throwing
- applyReaction: records the reactor and dedups per reactor per emoji.
This is persistent dedup (survives restart), unlike the connector's
in-memory processed-set. A pre-existing count with no sender list is
incremented from its stored value, not recomputed from the partial
list, so old counts are preserved.
- connector: threads the reactor name into all reaction paths. Channel
uses the frame sender; a room resolves the author via
fourByteRoomContactKey; an outgoing reaction is attributed to self.
- pending queue: retry now hands the stored reactor to its callback
Tests: reactor capture, two-reactor count, same-reactor no-double-count,
pre-#383 count preservation, and JSON round-trip + backward-compat +
malformed-entry handling for the new field. Full suite 604 passing.
Epic #376.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Owner hardware test on an S25 FE and Windows turned up five issues. Three of
them shared one root cause.
**Map: always show names.** New mapAlwaysShowNames setting, toggled from the
map panel. Names were shown only past zoom 14; the override wins at any zoom.
Evaluated at build rather than only on camera movement, so flipping the switch
repaints immediately instead of waiting for the next pan.
**Panel footer on every screen.** Disconnect and Settings now also appear
inside a channel. The footer is app-level, so it belongs anywhere the panel
is, not just the primary views.
**Back button (three reported symptoms, one cause).** Channels, Contacts and
Map each wrapped themselves in `PopScope(canPop: !isConnected)`, so while
connected the system back press was swallowed whole. That explains all three:
an open drawer would not close, Android would not background the app, and on
Windows the pinned layout has no Scaffold drawer, so the app bar auto-implied
a back arrow whose press PopScope then discarded - a button that visibly did
nothing.
AppShell now owns back handling for every screen that uses it, in order:
close an open drawer, else pop the route (a pushed chat returns to its list),
else hand back to the OS via SystemNavigator.pop() so Android returns to the
home screen or the previous app. The three per-screen PopScope wrappers are
removed. AppShell becomes stateful to hold the scaffold key this needs.
flutter analyze clean, dart format clean, 469 tests pass. Not yet re-tested on
hardware.
The firmware path-len byte is packed and self-describing (src/Packet.h:79-84):
high 2 bits = hash size - 1, low 6 bits = hash COUNT (hops), byte length =
count * size. The app treated the low 6 bits as a byte count and ignored the
width, on the strength of a comment asserting the high bits were "not reliably
populated". Both halves of that comment were wrong.
Receive: Contact.fromFrame read `count` bytes where firmware meant `count`
hops, so at 2-byte width it kept HALF of every path and discarded the rest.
DAYTON VA's 2-hop route became a 2-byte fragment, which is why every repeater
login in Bandit's capture timed out.
Send: buildUpdateContactPathFrame wrote the count raw, leaving mode bits 00.
That tells the radio "1-byte hashes" while handing it 2-byte hash data, so it
routed to nodes never on the route. This is the likelier cause of the observed
"routes via c6 and 5c separately" behaviour.
Also fixes a third unit inconsistency: setContactPath wrote customPath.length
(bytes) into pathLength (hops) after every path set.
Contact now carries pathHashWidth per path, so a stored path can never be
re-sliced at a width it was not captured at. realHopCount() is removed rather
than adjusted: it divided an already-correct hop count, halving it at 2-byte
width, and every call site was compensating for a bug that no longer exists.
Migration (Ben's call, option A): records written before this change have no
pathHashWidth and hold truncated bytes that cannot be recovered by
reinterpretation, so their path is dropped and the contact reverts to flood
until the radio re-supplies it. Logged, not silent.
Tests asserted the old semantics (expect(realHopCount(2, 2), 1)) and were
rewritten against firmware truth rather than adjusted to keep passing. Added
send-side encoding coverage, which did not exist. 456 tests pass.
Refs #240, #279, #299
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every received DM/channel message now logs arrival wall-clock vs the
sender-claimed payload timestamp (delta + TIME ANOMALY marker beyond
24h), routed directly to AppDebugLogService so the rotating on-disk
trail is unconditional. Models persist a nullable rxTime set at every
live ingest construction site; legacy stored records stay null.
Diagnostic child of #280.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds ChannelNotifyMode { all, mentionsOnly, off } and a channelNotifyModes
map keyed by PSK identity via AppSettings.channelNotifyKey, mirroring the
psk_ marker scheme ChannelMessageStore uses for history (#194). Keying by
PSK rather than display name means the setting survives a channel rename
and does not bleed across a slot reassignment (#193).
Legacy muted_channels stays readable and keeps being written:
AppSettingsService.channelNotifyMode falls back to it by name so a channel
muted before this feature still reports off, and setChannelNotifyMode keeps
it in sync so rolling back to a build without notify modes still honours an
Off channel. Name cannot be resolved to a PSK at the data layer, so the
migration is a read-through fallback rather than an upfront pass.
The notification gate and Channels UI still use the legacy isChannelMuted
path; #261 and #262 switch them over.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-len byte packs a hash-mode hint in the high 2 bits and the
path byte-length in the low 6. Contact.fromFrame stored it raw, so a direct
node at 2-byte mode (0x40) read as pathLength 64: "64 hops" in the UI, a ~195s
ACK timeout, and up to 64 junk bytes pulled into contact.path that broke
repeater status/telemetry/neighbors until the path was cleared (#222).
- contact.dart: decode via pathHopCount (& 0x3F); keep 0xFF as the flood
sentinel; use the decoded length for safePathLen so path bytes stay clean.
- chat_screen _currentPathLabel: show realHopCount(pathLength, pathHashByteWidth)
so 2/3-byte nodes read the correct hop count; 0 -> Direct.
- Regression test for 0x40/0x00/0x03/0x44/0xFF; updated two model_changes tests
that codified the old raw mapping.
Part of #222 (stays open for on-hardware validation by the reporter).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Channel.toShareUri/fromShareUri/isValidShareUri encode the reference
MeshCore app's format: meshcore://channel/add?name=<url-encoded>&secret=<hex32>.
A "Share QR Code" action in the channel menu shows the QR via the existing
QrCodeShareDialog, so it round-trips with the reference app.
Encode/decode unit-tested against both real reference examples (#test, #echo).
Scan-to-add follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Offband 0xC1 GPS query: 1-byte request -> RESP 0xC1 ASCII reply
(enabled/detected/active/fix/baud/lat/lon/alt_cm/sats/time), parsed into
OffbandGpsStatus (lat/lon /1e6). New GPS-status section in the Location dialog
(live-fix vs stored banner + coords/sats/alt/time). Validated against RedCreek's
feat/gps-state-query test firmware.
#140: the per-minute GPS poll now uses the lightweight 0xC1 query instead of
CMD_APP_START (which re-walked channels + re-drained messages = the BLE re-init
flood); a live fix updates self-lat/lon. Validated on b42 (APP_START ~1/min ->
~0, 0xC1 polls clean every 60s, channel re-walk gone).
Gemini (fix-then-ship): atomic completer-claim in _handleOffbandGps to shrink
the stale-reply race; full elimination needs a protocol sequence id, but the
poll shares in-flight via the re-entrancy guard and the query button is disabled
during a request, so concurrent requests don't occur in practice. The hardcoded
snackbars Gemini flagged in _editLocation are pre-existing l10n debt, not
introduced here; all new strings are localized.
Closes#135Closes#140
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Consume the additive OCFG_BROKERS dump fields from firmware #172/#173
(backward-compatible — absent fields read as today's enabled/disabled):
- BrokerRuntimeState (`state`) + BrokerLastError (`last_error`) + a pure
BrokerConfig.status mapping -> Connected / Connecting / Failed (reason) /
Held (no clock|low heap) / Enabled / Disabled; held shown neutral, not error.
- Brokers list shows the real status line + colour instead of just "enabled".
- Editor shows jwt_owner / iata_override resolved defaults (`jwt_owner_resolved`,
`iata_resolved`) as greyed placeholders when the raw key is blank; only writes
the raw key when the user enters a value (blank stays the source of truth).
Sourced from the pool dump (getBrokers); getBroker's per-field GET list is
unchanged pending the firmware GET-ability answer on #173. Unit-tested mapping,
parsing, and backward-compat (9 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A firmware build can ACK a broker enable/disable as success without applying it
(HV4; meshcore-firmware#179). The quick toggle and the editor save previously
trusted the ACK and showed a success snackbar, so an ack-but-no-op looked like
it worked.
Both paths now SET, wait a short settle, re-read the slot, and report what the
device ACTUALLY did:
- applied -> confirm
- notApplied -> warn "possible firmware issue"; the editor stays and re-seeds to
the device's true state instead of popping a false success
- unverified -> re-read failed (e.g. an enable that rebooted the device)
Every device is treated identically: the UI reflects the re-read, never assuming
a change took that the device didn't confirm.
- BrokerConfig.classifyApply pure classifier + BrokerApplyOutcome (unit-tested)
- ObserverConfigService.applySettleDelay
- wired into mqtt_brokers_screen quick toggle + broker_editor_screen save
- widget test for the ACK-but-not-applied path
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware feedback: JWT owner defaults to the device pubkey and IATA override
is optional by definition, so gating a save on them is wrong -- they have
under-the-hood firmware defaults.
BrokerConfig.enableError now checks only the structural fields with no default:
URL present, port in range. The JWT field checks are gone; the firmware enforces
JWT completeness with its defaults, and a genuinely-bad enable surfaces the
firmware's reason via the failure messaging added earlier. The editor's pre-save
check and the list's quick Enable both follow.
Tests updated to the new contract (a JWT broker with blank owner/audience now
enables; a structurally-complete quick Enable confirms). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware test feedback:
- Long-press Enable/Disable was silent on success AND failure. It now confirms
on success and, on failure, surfaces the device's reason (lastError) instead
of nothing.
- The client now refuses to quick-Enable a broker that can't work (incomplete
required fields, e.g. JWT without audience/owner) and says why -- so it never
reports "enabled" on a broker that won't run. (Firmware should reject too.)
- The editor blocked a DISABLE on blank/invalid fields. Validation now gates
ENABLING only -- disabling a slot with partial values is fine; it won't be
active.
Validation rules shared via BrokerConfig.enableError (editor pre-save + list
quick-Enable). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-length byte packs hop count (low 6 bits) and hash
width (high 2 bits) into one byte. The UI used it raw, so a 4-hop/2-byte
path showed as "68 hops" and the path list rendered per byte (8 entries
for 4 hops), and a 2-byte region mismatched a 1-byte one.
- Add pathHopCount/pathHashSizeBytes decoders (meshcore_protocol.dart)
- Add ChannelMessage.hopCount / pathHashSize getters; decode at display
and leave the stored pathLength untouched so the duplicate-merge in
the connector stays self-consistent
- Add an always-visible per-message hop-count badge in the channel chat
- Group path bytes into hash-width hashes in the chat "via" line and the
Message Details screen, using each packet's own width so mixed
1/2/3-byte feeds render correctly side by side
Verified against live BLE traffic (mixed 1-byte and 2-byte senders).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
this adds the actual last modified timestamp when present, before we used
last advert time as last modified in error
also sets _pendingInitialContactsSync to true on first connect over BLE
- Introduced translation functionality in chat screen, allowing users to translate messages before sending.
- Added MessageTranslationButton to the input bar for enabling/disabling translation.
- Implemented translation service to handle incoming and outgoing text translations using llama models.
- Enhanced message storage to include original and translated text, language codes, and translation status.
- Created UI components for displaying translated messages and managing translation options.
- Added translation model management, including downloading and storing models locally.
- Updated app settings to manage translation preferences and model selections.
- Companion radio stats: poll and display noise floor, RSSI, SNR, airtime
with dedicated ValueNotifier and ref-counted polling
- Adaptive RF-aware TX backoff based on radio conditions instead of fixed 5s
- Variable-width path hash support (1-3 bytes per hop)
- Air activity dot indicator in app bar with tap to open stats screen
- Jump to oldest unread setting for chat screens
- 1s send cooldown on DM and channel messages
- Link style: theme-aware orange, added EmailLinkifier
- New languages: Hungarian, Japanese, Korean
- Remove dead DeviceScreen and BatteryIndicatorChip
- Remove wakelock_plus dependency
- TX power fields now read as signed int8
- Implemented radio statistics features in multiple screens including chat, channels, and settings.
- Added localization for new strings in Swedish, Ukrainian, and Chinese.
- Introduced a setting to jump to the oldest unread message in chat and channels.
- Enhanced path management and display for contacts and messages.
- Updated app settings to include new boolean for jumping to the oldest unread message.
- Improved battery indicator and radio stats display in the app bar.
- Removed unused wakelock_plus dependency and updated plugin registrations.
- Added storageUsedKb and storageTotalKb properties to MeshCoreConnector.
- Updated battery and storage frame parsing with improved error handling.
- Refactored log RX data handling to use BufferReader for better readability and error management.
- Enhanced message parsing in ChannelMessage and Message classes to utilize BufferReader.
- Introduced new text type for signed messages in meshcore_protocol.dart.
- Updated BLE debug log screen to use BufferReader for payload parsing.
- Refactored message retry service to handle ACK hashes as integers instead of Uint8List.
- Improved message storage serialization and deserialization to accommodate new expectedAckHash type.
- Added wasPulled property to Contact model for better state management.
* feat: Enhance privacy settings and telemetry
- Implemented telemetry options for contacts, allowing users to enable or disable telemetry data sharing.
- Introduced a clear chat option in the chat interface for better message management.
- Updated the telemetry screen to handle telemetry data for contacts, including battery level.
- Refactored contact settings to include telemetry options and improved UI for better user experience.
* feat: Refactor repeater resolution logic across multiple screens
Train a linear regression model on actual message delivery times to
predict tighter timeouts, replacing worst-case physics estimates.
Features: path length, message bytes, seconds since last RX, flood mode.
Global model with per-contact blending after 10+ observations per contact.
Falls back to existing physics formula when model has insufficient data.
Strycher
ericz
HDDen
Enot (ded) Skelly
zjs81
Serge Tarkovski
zjs81
Winston Lowe