The firmware path-len byte is packed and self-describing (src/Packet.h:79-84):
high 2 bits = hash size - 1, low 6 bits = hash COUNT (hops), byte length =
count * size. The app treated the low 6 bits as a byte count and ignored the
width, on the strength of a comment asserting the high bits were "not reliably
populated". Both halves of that comment were wrong.
Receive: Contact.fromFrame read `count` bytes where firmware meant `count`
hops, so at 2-byte width it kept HALF of every path and discarded the rest.
DAYTON VA's 2-hop route became a 2-byte fragment, which is why every repeater
login in Bandit's capture timed out.
Send: buildUpdateContactPathFrame wrote the count raw, leaving mode bits 00.
That tells the radio "1-byte hashes" while handing it 2-byte hash data, so it
routed to nodes never on the route. This is the likelier cause of the observed
"routes via c6 and 5c separately" behaviour.
Also fixes a third unit inconsistency: setContactPath wrote customPath.length
(bytes) into pathLength (hops) after every path set.
Contact now carries pathHashWidth per path, so a stored path can never be
re-sliced at a width it was not captured at. realHopCount() is removed rather
than adjusted: it divided an already-correct hop count, halving it at 2-byte
width, and every call site was compensating for a bug that no longer exists.
Migration (Ben's call, option A): records written before this change have no
pathHashWidth and hold truncated bytes that cannot be recovered by
reinterpretation, so their path is dropped and the contact reverts to flood
until the radio re-supplies it. Logged, not silent.
Tests asserted the old semantics (expect(realHopCount(2, 2), 1)) and were
rewritten against firmware truth rather than adjusted to keep passing. Added
send-side encoding coverage, which did not exist. 456 tests pass.
Refs #240, #279, #299
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every received DM/channel message now logs arrival wall-clock vs the
sender-claimed payload timestamp (delta + TIME ANOMALY marker beyond
24h), routed directly to AppDebugLogService so the rotating on-disk
trail is unconditional. Models persist a nullable rxTime set at every
live ingest construction site; legacy stored records stay null.
Diagnostic child of #280.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
App-global (NOT per-device) block list, source of truth for the client:
- BlockStore persists blockedKeys (pubkey hex) + blockedNames (name->first-seen
epoch, for A7 promote-and-prune) via PrefsManager, global keys.
- BlockService (ChangeNotifier): isBlocked/isNameBlocked/block/unblock/
blockName/unblockName + unmodifiable accessors.
- Wired into main.dart MultiProvider.
Epic A #165 / A1 #168. Design: docs/architecture/block-contract-as-built.md.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gemini review flagged setPublicKeyHex using `value.length > 10`, which would
store an empty scope for an exactly-10-char device key (unreachable today —
MeshCore public keys are 64 hex — but inconsistent with ChannelStore, which
uses >=10). Align to >=10 for consistency and to remove the latent off-by-one.
Channel message history was persisted keyed by the reusable slot index, so a
channel added to a slot that once held another channel inherited its messages.
Storage now keys by the channel's PSK identity via a resolver on the store
(index -> channel PSK), leaving all call sites unchanged. A one-time migration
adopts pre-existing slot-index history into the PSK key on first load (only when
the PSK is known); clearChannelMessages now wipes both the PSK key and the raw
slot-index key so Build-B's reuse-clear can't be re-migrated onto a new occupant.
Build-A (durable) of epic #190; supersedes Build-B's (#193) guard. Also removes
the dead device-wide fallback read in loadChannelMessages.
this adds the actual last modified timestamp when present, before we used
last advert time as last modified in error
also sets _pendingInitialContactsSync to true on first connect over BLE
- Introduced translation functionality in chat screen, allowing users to translate messages before sending.
- Added MessageTranslationButton to the input bar for enabling/disabling translation.
- Implemented translation service to handle incoming and outgoing text translations using llama models.
- Enhanced message storage to include original and translated text, language codes, and translation status.
- Created UI components for displaying translated messages and managing translation options.
- Added translation model management, including downloading and storing models locally.
- Updated app settings to manage translation preferences and model selections.
- Added storageUsedKb and storageTotalKb properties to MeshCoreConnector.
- Updated battery and storage frame parsing with improved error handling.
- Refactored log RX data handling to use BufferReader for better readability and error management.
- Enhanced message parsing in ChannelMessage and Message classes to utilize BufferReader.
- Introduced new text type for signed messages in meshcore_protocol.dart.
- Updated BLE debug log screen to use BufferReader for payload parsing.
- Refactored message retry service to handle ACK hashes as integers instead of Uint8List.
- Improved message storage serialization and deserialization to accommodate new expectedAckHash type.
- Added wasPulled property to Contact model for better state management.
* Refactor contact handling: replace DiscoveryContact with Contact, update related methods and settings
* Enhance contact handling: include latitude, longitude, and last modified timestamp in contact updates; refactor path handling to accommodate discovered contacts across multiple screens
* Enhance SNRIndicator: include discovered contacts in name resolution for repeaters
* Refactor path handling: replace addReturnPath with buildPath to improve path construction logic and handle target contact types
* Update lib/screens/map_screen.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add localization for "Show Discovery Contacts" in multiple languages and refactor location plausibility check in map screen
* Enhance contact management: update discovered contacts' active status and improve contact handling with flags and raw packet data
* Refactor ChannelsScreen: pass ChannelMessageStore to buildExpandedContent and ensure messages are cleared after channel creation
* Update MapScreen: adjust label zoom threshold and refactor guessed marker building to include labels
* Refactor ChannelsScreen: change channelMessageStore to a private getter and update its usage in buildExpandedContent calls
* Enhance location plausibility check: add latitude and longitude bounds to ensure valid coordinates
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Refactor MeshCoreConnector and related stores: update discovered contacts handling, migrate legacy keys, and set public key in community store
* Refactor MeshCoreConnector and ChannelsScreen: update discovered contacts handling and set public key in community store; enhance location plausibility check in MapScreen
* Update CMD_ADD_UPDATE_CONTACT frame format to include optional latitude and longitude fields
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
- Translated contact settings and related strings in Slovenian, Swedish, Ukrainian, Chinese, Dutch, Polish, Portuguese, Russian, and Slovak.
- Added new strings for discovered contacts actions such as adding, copying, and deleting contacts.
- Enhanced the DiscoveryContact model to include a rawPacket field for better data handling.
- Updated the contacts screen to support new actions in the context menu for discovered contacts.
- Improved the contact discovery store to handle the serialization of the new rawPacket field.
- Implemented contact settings in localization files for Swedish, Ukrainian, and Chinese.
- Added new DiscoveryContact model to handle discovered contacts.
- Created DiscoveryScreen to display discovered contacts with filtering and sorting options.
- Integrated contact discovery storage to persist discovered contacts.
- Updated settings screen to include options for automatic contact addition.
- Enhanced app bar and list filter widgets for better user experience.
- Fixed variable naming inconsistencies in contact model.
formats all dart files using `dart format .` from the root project dir
this makes the code style repeatable by new contributors and makes PR review easier
- Implement Community model for managing community data, including secret handling and PSK derivation.
- Create CommunityQrScannerScreen for scanning and joining communities via QR codes.
- Develop CommunityStore for persisting community data using SharedPreferences.
- Introduce QrCodeDisplay widget for displaying QR codes with customizable options.
- Add QrScannerWidget for reusable QR code scanning functionality with validation and controls.
Core Features
Unread Message Tracking: Added persistent unread counts for contacts and channels with visual badges
Message Deletion: Users can now long-press to delete individual messages in chats and channels
SMAZ Compression: Added per-contact compression settings (previously only channels)
UTF-8 Length Limiting: Text inputs now enforce protocol byte limits correctly
Channel Message Paths: New screen to visualize packet routing through repeater network with map view
Protocol Updates
Added maxContactMessageBytes() and maxChannelMessageBytes() helpers for message length validation
Changed channel PSK format from Base64 to Hexadecimal (breaking change)
Added app version field to connection handshake frame
UI Improvements
Unread badges on all contact and channel list items
Enhanced message bubbles with path visualization for channel messages
Character count displays in message input fields
Improved repeater CLI screen functionality
New Files
lib/storage/unread_store.dart - Unread tracking persistence
lib/storage/contact_settings_store.dart - Per-contact SMAZ settings
lib/widgets/unread_badge.dart - Unread count indicator
lib/helpers/utf8_length_limiter.dart - Byte-aware text input formatter
lib/screens/channel_message_path_screen.dart - Packet path visualization
Open-source Flutter client for MeshCore LoRa mesh networking devices.
Features:
- BLE device scanning and connection
- Nordic UART Service (NUS) integration
- Material 3 design with system theme support
- Provider-based state management
- Placeholder screens for chat, contacts, and settings
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
Strycher
HDDen
Enot (ded) Skelly
zjs81
Winston Lowe
ericz
zjs81
446564