Always-on file logging so users/support can retrieve a log without enabling
anything in the UI. No-op on web (no filesystem).
- FileLogWriter: rotating file writer (size cap + max files), single + batch
writes, unit-tested against a real temp dir.
- FileLogService: singleton initialised in main(); resolves
getApplicationSupportDirectory()/logs, queues lines, periodic 2s batched
flush, bounded queue, never crashes the app on an IO error.
- AppDebugLogService.log + BleDebugLogService.logFrame write every entry to the
file (app logs always, independent of the in-app viewer's enable gate).
Location per the #97 decision: standard support dir on all platforms (Windows
%APPDATA%\app.offband.meshcore\logs). Still TODO before recompile: access UI
("Open logs folder" on desktop / "Share logs" on mobile).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A firmware build can ACK a broker enable/disable as success without applying it
(HV4; meshcore-firmware#179). The quick toggle and the editor save previously
trusted the ACK and showed a success snackbar, so an ack-but-no-op looked like
it worked.
Both paths now SET, wait a short settle, re-read the slot, and report what the
device ACTUALLY did:
- applied -> confirm
- notApplied -> warn "possible firmware issue"; the editor stays and re-seeds to
the device's true state instead of popping a false success
- unverified -> re-read failed (e.g. an enable that rebooted the device)
Every device is treated identically: the UI reflects the re-read, never assuming
a change took that the device didn't confirm.
- BrokerConfig.classifyApply pure classifier + BrokerApplyOutcome (unit-tested)
- ObserverConfigService.applySettleDelay
- wired into mqtt_brokers_screen quick toggle + broker_editor_screen save
- widget test for the ACK-but-not-applied path
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The write half of the broker editor, against RedCreek's confirmed field-at-a-time
contract. The existing 0xC0 key/value command already carries the broker keys --
no new wire codes -- so the codec comment at observer_config_client.dart:166 is
stale, not a gap.
- saveBroker(): disable a live slot first, write each changed field, write
`enabled` LAST. Stops at the first ERR/timeout and reports the failed field --
a partial save leaves the slot disabled, never live-corrupt (activation guard).
TDD: ordering + partial-failure tests.
- clearBroker(): mqtt.broker.<slot>.clear.
- getBroker(): single-slot re-GET via 14 per-field GETs (recovery / post-save
read), not the 84-frame pool dump. Password is write-only -> best-effort.
Key spellings (mqtt.broker.N.enabled / .clear, scalar field GET) are inferred
from the existing scheme; they're the one thing the joint firmware test confirms.
12/12 service tests green. UI (brokers screen + editor) next.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three observer-delta fixes (per the #80 sync diagnosis / G2):
- A: settings screen gates the Observer category via context.select on the
supported flag, not a connector-wide context.watch -- the watch rebuilt the
whole settings screen on every sync frame, thrashing the UI thread.
- B: a flat Save re-reads only the flat settings (refresh includeBrokers:false),
never the 84-frame broker pool -- no BLE re-flood for a display toggle.
- C: the initial observer read is deferred until the device's channel/contact
sync settles, so it never competes with that sync for BLE.
TDD: B (no OCFG_BROKERS on a flat refresh) + C (refresh deferred while syncing,
fires once idle). Full observer suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The G2 BLE log showed the config protocol works (GETs return values; the broker
dump starts) but the firmware's broker dump stalls without BROKERS_END, so
getBrokers() times out. The client was treating that as a TOTAL failure --
discarding the 7 flat settings it read cleanly and blanking the pane.
Now the broker pool loads independently: refresh() builds + shows the flat
config even when getBrokers fails, flags brokersUnavailable, and the pane shows
the broker section as "unavailable" instead of going stale. Flat settings stay
usable. TDD red->green; full observer suite (39) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Closes the 2 MINOR findings from the G1 re-review (#76):
- MINOR-A: ObserverConfigService.refresh() no longer wipes lastError / clears
stale on a PARTIAL read. A null from any getFlat is a failed read; the
snapshot is marked stale and the error kept (error-visibility).
- MINOR-B: the settings pane validates status_interval against the firmware
range (10-3600) before sending; an out-of-range value is not put on the wire
and the user is told.
TDD: both tests RED first (current sent '5'; refresh wiped the error), GREEN
after. Full observer suite (37 tests) green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Greens A2's adversarial tests, fixing the Gemini findings:
- BLOCKER #1 (race): a chain-lock (_serialized) serializes every transport
round-trip, so overlapping refresh()/setFlat() can no longer cross responses
(firmware has no request id; responses correlate by order).
- MINOR #6 (secret leak): error messages redact secret key names
(wifi.pwd / *.password / *.pwd -> "<secret>").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- screens/settings/observer_settings_view.dart: staged-save pane for WiFi
(ssid/pwd/enabled), MQTT region (iata/status_interval), display
(always_on/rotation 0|180), with Save (changed keys only) + Refresh +
stale/error banners; the broker pool renders read-only (enable/clear await
the firmware F-task).
- settings_screen.dart: register the Observer category, gated on
ObserverConfigService.supported (re-evaluated as the connector's offband_caps
flips on connect/disconnect).
- connector/meshcore_connector.dart: parse the offband_caps byte (device-info
byte 82, after path_hash_mode) + expose offbandCaps.
- services/observer_config_service.dart: supported computed live from the
connector (version gate + cap bit).
- main.dart: provide ObserverConfigService.
Strings are English-only pending l10n ARB keys.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
PathHistoryService capped each contact's recentPaths at 100 but dropped any new distinct path once full, so the list froze on the first 100 ever seen and never refreshed with newer/better routes. Evict the lowest-_scorePathRecord entry to make room, keeping the strongest 100. Adds a regression test (full history evicts the weakest to admit a new path).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Updated _RepeaterStatusScreenState to load status after the first frame to avoid mid-build notifyListeners() calls.
- Removed unused _statusRequestedAt variable and adjusted _clockText() to use repeaterClockAtLogin for time display.
- Enhanced _SettingsScreenState with a GPS toggle switch that updates custom variables for GPS settings.
- Cleaned up RepeaterCommandService by removing redundant pending command checks and adjusted command ID generation.
- Removed jni plugin from generated_plugins.cmake for both Linux and Windows platforms.
Introduced a new setting for automatic clock synchronization after a successful repeater login.
Added localization support for the new feature in multiple languages (Bulgarian, German, English, Spanish, French, Hungarian, Italian, Japanese, Korean, Dutch, Polish, Portuguese, Russian, Slovak, Slovenian, Swedish, Ukrainian, Chinese).
Implemented storage service methods to manage the new setting.
Updated the repeater settings screen to include a toggle for the new feature.
Enhanced the repeater login dialog to trigger clock synchronization automatically if the setting is enabled.
- Introduced translation functionality in chat screen, allowing users to translate messages before sending.
- Added MessageTranslationButton to the input bar for enabling/disabling translation.
- Implemented translation service to handle incoming and outgoing text translations using llama models.
- Enhanced message storage to include original and translated text, language codes, and translation status.
- Created UI components for displaying translated messages and managing translation options.
- Added translation model management, including downloading and storing models locally.
- Updated app settings to manage translation preferences and model selections.
- Implemented radio statistics features in multiple screens including chat, channels, and settings.
- Added localization for new strings in Swedish, Ukrainian, and Chinese.
- Introduced a setting to jump to the oldest unread message in chat and channels.
- Enhanced path management and display for contacts and messages.
- Updated app settings to include new boolean for jumping to the oldest unread message.
- Improved battery indicator and radio stats display in the app bar.
- Removed unused wakelock_plus dependency and updated plugin registrations.
Strycher
ericz
ZIER
HDDen
zjs81
Enot (ded) Skelly
zjs81
Winston Lowe
just-stuff-tm
Serge Tarkovski
Zach
just_stuff_tm