Every received DM/channel message now logs arrival wall-clock vs the
sender-claimed payload timestamp (delta + TIME ANOMALY marker beyond
24h), routed directly to AppDebugLogService so the rotating on-disk
trail is unconditional. Models persist a nullable rxTime set at every
live ingest construction site; legacy stored records stay null.
Diagnostic child of #280.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds ChannelNotifyMode { all, mentionsOnly, off } and a channelNotifyModes
map keyed by PSK identity via AppSettings.channelNotifyKey, mirroring the
psk_ marker scheme ChannelMessageStore uses for history (#194). Keying by
PSK rather than display name means the setting survives a channel rename
and does not bleed across a slot reassignment (#193).
Legacy muted_channels stays readable and keeps being written:
AppSettingsService.channelNotifyMode falls back to it by name so a channel
muted before this feature still reports off, and setChannelNotifyMode keeps
it in sync so rolling back to a build without notify modes still honours an
Off channel. Name cannot be resolved to a PSK at the data layer, so the
migration is a read-through fallback rather than an upfront pass.
The notification gate and Channels UI still use the legacy isChannelMuted
path; #261 and #262 switch them over.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-len byte packs a hash-mode hint in the high 2 bits and the
path byte-length in the low 6. Contact.fromFrame stored it raw, so a direct
node at 2-byte mode (0x40) read as pathLength 64: "64 hops" in the UI, a ~195s
ACK timeout, and up to 64 junk bytes pulled into contact.path that broke
repeater status/telemetry/neighbors until the path was cleared (#222).
- contact.dart: decode via pathHopCount (& 0x3F); keep 0xFF as the flood
sentinel; use the decoded length for safePathLen so path bytes stay clean.
- chat_screen _currentPathLabel: show realHopCount(pathLength, pathHashByteWidth)
so 2/3-byte nodes read the correct hop count; 0 -> Direct.
- Regression test for 0x40/0x00/0x03/0x44/0xFF; updated two model_changes tests
that codified the old raw mapping.
Part of #222 (stays open for on-hardware validation by the reporter).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Channel.toShareUri/fromShareUri/isValidShareUri encode the reference
MeshCore app's format: meshcore://channel/add?name=<url-encoded>&secret=<hex32>.
A "Share QR Code" action in the channel menu shows the QR via the existing
QrCodeShareDialog, so it round-trips with the reference app.
Encode/decode unit-tested against both real reference examples (#test, #echo).
Scan-to-add follows.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Offband 0xC1 GPS query: 1-byte request -> RESP 0xC1 ASCII reply
(enabled/detected/active/fix/baud/lat/lon/alt_cm/sats/time), parsed into
OffbandGpsStatus (lat/lon /1e6). New GPS-status section in the Location dialog
(live-fix vs stored banner + coords/sats/alt/time). Validated against RedCreek's
feat/gps-state-query test firmware.
#140: the per-minute GPS poll now uses the lightweight 0xC1 query instead of
CMD_APP_START (which re-walked channels + re-drained messages = the BLE re-init
flood); a live fix updates self-lat/lon. Validated on b42 (APP_START ~1/min ->
~0, 0xC1 polls clean every 60s, channel re-walk gone).
Gemini (fix-then-ship): atomic completer-claim in _handleOffbandGps to shrink
the stale-reply race; full elimination needs a protocol sequence id, but the
poll shares in-flight via the re-entrancy guard and the query button is disabled
during a request, so concurrent requests don't occur in practice. The hardcoded
snackbars Gemini flagged in _editLocation are pre-existing l10n debt, not
introduced here; all new strings are localized.
Closes#135Closes#140
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Consume the additive OCFG_BROKERS dump fields from firmware #172/#173
(backward-compatible — absent fields read as today's enabled/disabled):
- BrokerRuntimeState (`state`) + BrokerLastError (`last_error`) + a pure
BrokerConfig.status mapping -> Connected / Connecting / Failed (reason) /
Held (no clock|low heap) / Enabled / Disabled; held shown neutral, not error.
- Brokers list shows the real status line + colour instead of just "enabled".
- Editor shows jwt_owner / iata_override resolved defaults (`jwt_owner_resolved`,
`iata_resolved`) as greyed placeholders when the raw key is blank; only writes
the raw key when the user enters a value (blank stays the source of truth).
Sourced from the pool dump (getBrokers); getBroker's per-field GET list is
unchanged pending the firmware GET-ability answer on #173. Unit-tested mapping,
parsing, and backward-compat (9 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A firmware build can ACK a broker enable/disable as success without applying it
(HV4; meshcore-firmware#179). The quick toggle and the editor save previously
trusted the ACK and showed a success snackbar, so an ack-but-no-op looked like
it worked.
Both paths now SET, wait a short settle, re-read the slot, and report what the
device ACTUALLY did:
- applied -> confirm
- notApplied -> warn "possible firmware issue"; the editor stays and re-seeds to
the device's true state instead of popping a false success
- unverified -> re-read failed (e.g. an enable that rebooted the device)
Every device is treated identically: the UI reflects the re-read, never assuming
a change took that the device didn't confirm.
- BrokerConfig.classifyApply pure classifier + BrokerApplyOutcome (unit-tested)
- ObserverConfigService.applySettleDelay
- wired into mqtt_brokers_screen quick toggle + broker_editor_screen save
- widget test for the ACK-but-not-applied path
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware feedback: JWT owner defaults to the device pubkey and IATA override
is optional by definition, so gating a save on them is wrong -- they have
under-the-hood firmware defaults.
BrokerConfig.enableError now checks only the structural fields with no default:
URL present, port in range. The JWT field checks are gone; the firmware enforces
JWT completeness with its defaults, and a genuinely-bad enable surfaces the
firmware's reason via the failure messaging added earlier. The editor's pre-save
check and the list's quick Enable both follow.
Tests updated to the new contract (a JWT broker with blank owner/audience now
enables; a structurally-complete quick Enable confirms). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware test feedback:
- Long-press Enable/Disable was silent on success AND failure. It now confirms
on success and, on failure, surfaces the device's reason (lastError) instead
of nothing.
- The client now refuses to quick-Enable a broker that can't work (incomplete
required fields, e.g. JWT without audience/owner) and says why -- so it never
reports "enabled" on a broker that won't run. (Firmware should reject too.)
- The editor blocked a DISABLE on blank/invalid fields. Validation now gates
ENABLING only -- disabling a slot with partial values is fine; it won't be
active.
Validation rules shared via BrokerConfig.enableError (editor pre-save + list
quick-Enable). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-length byte packs hop count (low 6 bits) and hash
width (high 2 bits) into one byte. The UI used it raw, so a 4-hop/2-byte
path showed as "68 hops" and the path list rendered per byte (8 entries
for 4 hops), and a 2-byte region mismatched a 1-byte one.
- Add pathHopCount/pathHashSizeBytes decoders (meshcore_protocol.dart)
- Add ChannelMessage.hopCount / pathHashSize getters; decode at display
and leave the stored pathLength untouched so the duplicate-merge in
the connector stays self-consistent
- Add an always-visible per-message hop-count badge in the channel chat
- Group path bytes into hash-width hashes in the chat "via" line and the
Message Details screen, using each packet's own width so mixed
1/2/3-byte feeds render correctly side by side
Verified against live BLE traffic (mixed 1-byte and 2-byte senders).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
this adds the actual last modified timestamp when present, before we used
last advert time as last modified in error
also sets _pendingInitialContactsSync to true on first connect over BLE
- Introduced translation functionality in chat screen, allowing users to translate messages before sending.
- Added MessageTranslationButton to the input bar for enabling/disabling translation.
- Implemented translation service to handle incoming and outgoing text translations using llama models.
- Enhanced message storage to include original and translated text, language codes, and translation status.
- Created UI components for displaying translated messages and managing translation options.
- Added translation model management, including downloading and storing models locally.
- Updated app settings to manage translation preferences and model selections.
- Companion radio stats: poll and display noise floor, RSSI, SNR, airtime
with dedicated ValueNotifier and ref-counted polling
- Adaptive RF-aware TX backoff based on radio conditions instead of fixed 5s
- Variable-width path hash support (1-3 bytes per hop)
- Air activity dot indicator in app bar with tap to open stats screen
- Jump to oldest unread setting for chat screens
- 1s send cooldown on DM and channel messages
- Link style: theme-aware orange, added EmailLinkifier
- New languages: Hungarian, Japanese, Korean
- Remove dead DeviceScreen and BatteryIndicatorChip
- Remove wakelock_plus dependency
- TX power fields now read as signed int8
- Implemented radio statistics features in multiple screens including chat, channels, and settings.
- Added localization for new strings in Swedish, Ukrainian, and Chinese.
- Introduced a setting to jump to the oldest unread message in chat and channels.
- Enhanced path management and display for contacts and messages.
- Updated app settings to include new boolean for jumping to the oldest unread message.
- Improved battery indicator and radio stats display in the app bar.
- Removed unused wakelock_plus dependency and updated plugin registrations.
- Added storageUsedKb and storageTotalKb properties to MeshCoreConnector.
- Updated battery and storage frame parsing with improved error handling.
- Refactored log RX data handling to use BufferReader for better readability and error management.
- Enhanced message parsing in ChannelMessage and Message classes to utilize BufferReader.
- Introduced new text type for signed messages in meshcore_protocol.dart.
- Updated BLE debug log screen to use BufferReader for payload parsing.
- Refactored message retry service to handle ACK hashes as integers instead of Uint8List.
- Improved message storage serialization and deserialization to accommodate new expectedAckHash type.
- Added wasPulled property to Contact model for better state management.
* feat: Enhance privacy settings and telemetry
- Implemented telemetry options for contacts, allowing users to enable or disable telemetry data sharing.
- Introduced a clear chat option in the chat interface for better message management.
- Updated the telemetry screen to handle telemetry data for contacts, including battery level.
- Refactored contact settings to include telemetry options and improved UI for better user experience.
* feat: Refactor repeater resolution logic across multiple screens
Train a linear regression model on actual message delivery times to
predict tighter timeouts, replacing worst-case physics estimates.
Features: path length, message bytes, seconds since last RX, flood mode.
Global model with per-contact blending after 10+ observations per contact.
Falls back to existing physics formula when model has insufficient data.
* Refactor contact handling: replace DiscoveryContact with Contact, update related methods and settings
* Enhance contact handling: include latitude, longitude, and last modified timestamp in contact updates; refactor path handling to accommodate discovered contacts across multiple screens
* Enhance SNRIndicator: include discovered contacts in name resolution for repeaters
* Refactor path handling: replace addReturnPath with buildPath to improve path construction logic and handle target contact types
* Update lib/screens/map_screen.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add localization for "Show Discovery Contacts" in multiple languages and refactor location plausibility check in map screen
* Enhance contact management: update discovered contacts' active status and improve contact handling with flags and raw packet data
* Refactor ChannelsScreen: pass ChannelMessageStore to buildExpandedContent and ensure messages are cleared after channel creation
* Update MapScreen: adjust label zoom threshold and refactor guessed marker building to include labels
* Refactor ChannelsScreen: change channelMessageStore to a private getter and update its usage in buildExpandedContent calls
* Enhance location plausibility check: add latitude and longitude bounds to ensure valid coordinates
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Refactor MeshCoreConnector and related stores: update discovered contacts handling, migrate legacy keys, and set public key in community store
* Refactor MeshCoreConnector and ChannelsScreen: update discovered contacts handling and set public key in community store; enhance location plausibility check in MapScreen
* Update CMD_ADD_UPDATE_CONTACT frame format to include optional latitude and longitude fields
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Adds map_showGuessedLocations and map_guessedLocation to app_en.arb and translates them across all 14 supported locales. Regenerates dart localizations.
- Translated contact settings and related strings in Slovenian, Swedish, Ukrainian, Chinese, Dutch, Polish, Portuguese, Russian, and Slovak.
- Added new strings for discovered contacts actions such as adding, copying, and deleting contacts.
- Enhanced the DiscoveryContact model to include a rawPacket field for better data handling.
- Updated the contacts screen to support new actions in the context menu for discovered contacts.
- Improved the contact discovery store to handle the serialization of the new rawPacket field.
- Implemented contact settings in localization files for Swedish, Ukrainian, and Chinese.
- Added new DiscoveryContact model to handle discovered contacts.
- Created DiscoveryScreen to display discovered contacts with filtering and sorting options.
- Integrated contact discovery storage to persist discovered contacts.
- Updated settings screen to include options for automatic contact addition.
- Enhanced app bar and list filter widgets for better user experience.
- Fixed variable naming inconsistencies in contact model.
Strycher
ericz
HDDen
Enot (ded) Skelly
zjs81
Serge Tarkovski
zjs81
Winston Lowe
Ben Allfree
Krasimir Kazakov
just_stuff_tm