1001 Commits (054c7ddba269582d8aee4e55b6672bc68b61335f)

Author	SHA1	Message	Date
diffwireauto	317ce17437	feat(#981): channel tune codec over 0xC5 0x0B/0x0C ... Codec and connector for per-channel tune (#971), gated on caps byte 2 0x10 per meshcore-firmware#1789. ChannelTune makes inherit (stored 0) and Silent (tune id 0, stored 1) distinct values with the byte never built by hand, because collapsing them is unrecoverable from the user's side. Per-channel state follows only the device's re-read reply, a refusal is attributed to the channel-tune surface, and a new radio clears the previous one's tunes. No UI yet: the picker waits for an owner-approved mockup, and for the tune catalogue (builtin ids and names), which is not on the wire. Agent: MistyLynx (session 6c0d5797) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	bf47a26155	feat(#978): split Button and buzzer into Node Settings and Message Settings ... Button actions stay under Node Settings, shown only on caps byte 2 0x02. Buzzer and tones move to Message Settings as their own card under the phone-notifications card, shown only on 0x01. DeviceUiView now renders one part, requests only that part's state, and shows a refusal only on the screen it belongs to. Boards with a buzzer and no button exist (m5stack_unit_c6l, thinknode_m9, wio-tracker-l1-eink), which is why the homes are separate. Placement and entry gates only: the screen already showed each half from its own bit, and every wire write is unchanged. The Buzzer and tones subtitle says 'When this radio beeps' rather than the mockup's 'and which tone', because no tone picker exists until #971 and #970. Tests: all four button/buzzer combinations, and that each entry opens and requests only its own half. Full suite 1506 pass. Agent: MistyLynx (session 6c0d5797) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	4209b75284	feat(#969): GPS mode and Power-save interval over 0xC5 ... Codec for 0xC5 sub-codes 0x0D/0x0E, gated on caps byte 2 0x20, per the contract on meshcore-firmware#1789: the 14-byte state reply (resolved mode, raw stored byte incl. 0xFF, ps_ok, activity, 32-bit interval and wait), extended in place in offband_device_ui.dart and the existing 0xC5 dispatcher rather than a second codec. Caps bits 0x10 channel tune and 0x20 GPS mode added beside the others. On a 0x20 radio the Location GPS card is the approved one Off / On / Power save control, one status row naming backed off with its wait and last fix, and a sleep row only in Power save where 0 reads as the firmware default. Power save is offered only where ps_ok says the build can run it. Every value shown is the device's reply. Other radios keep the #977 on/off toggle unchanged. Safety: a mode change resends the radio's own interval, so setGpsMode refuses visibly until state has been read rather than send an interval it does not know. The 0x7F error frame names no sub-code, so a refusal is attributed to the outstanding write and each screen shows only its own. A confirmed mode keeps the legacy gps custom-var mirror, and so the 0xC1 poll, in step, but never invents the var. Tests: codec, connector (gate, bytes, attribution, mirror) and screen. Full suite 1499 pass. Agent: MistyLynx (session 6c0d5797) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	2a6d7383fc	feat(#977): Location is a top-level settings category and the only home for GPS ... New LocationView pane directly under Radio Settings: the GPS toggle and the 0xC1 GPS status, then Coordinates and Position reporting interval as rows that open their own editors. The GPS toggle and the Location row leave Node Settings, and the combined Location dialog is gone, so GPS appears in exactly one place. What the radio sees is unchanged: the same gps and gps_interval custom vars, the same 60 to 86399 s validation, the same error messages. One deliberate difference: coordinates and the interval now save independently. The old dialog returned early on an empty or invalid interval and silently skipped saving the coordinates too. Tests: settings_location_test pins placement from both sides and the writes. Two existing settings tests now scroll a category into view before tapping it; the lazily built category list put Debug past a 900 px viewport once Location was added. untranslated.json is a full regeneration and also picks up two block_noRadio keys dev was already missing. Agent: MistyLynx (session 6c0d5797) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	5b061924c7	feat(#966): mock-ups, a confirmation that states the scope, and the eligibility bug it found ... The owner asked why there were no UI mock-ups to review. There was no good answer: this Epic's card was built and installed on both his machines without him ever seeing the design, and the plan had no step requiring otherwise. So the plan now has B0: mock-ups first, owner-approved before any of it is built, as a committed HTML file beside the plan in the format his firmware initiative already uses. epic-b-storage-mockups.html is that file: eleven numbered variants with real Material 3 tokens, a 360-wide pane, example values from his own install, and the behaviour to build as bullets under each. Owner-approved 2026-10-23. The confirmation (B1a, variants 8 to 10). It states how many copies, roughly how much space, how many messages are NOT affected, and that it cannot be undone, with the count on the action button so the scope is the last thing read. Cancel, a tap outside and back all decline. Nothing eligible opens no dialog at all, because a dialog that only says zero is not worth opening. That needed a preview pass: verify every eligible key and total it without deleting, so the numbers are real rather than estimated. Verification now runs twice for a confirmed clear, once to preview and once under the key lock. That is the cost of saying what will go before it goes. approximateBytes is named for what it is: the sum of blob lengths, not what VACUUM returns, because page rounding moves the real figure; the dialog says "about" and the result reports what actually changed. Writing the preview found a real bug, and it was about to bite him. The "skip anything stamped this pass" guard exists so installing an update never deletes a blob on sight, and it was being applied to the button as well. Every install that migrated before #962 has an empty __msgrows_migrated_at, so the first press stamped everything and cleared NOTHING. His install is exactly that: 47 migrated keys, none stamped. He would have pressed the button on a 70.9 MB database with 16.6 MB of reclaimable blobs and been told "nothing to clear". Fixed as eligibleByAge, one static rule both preview and run share, so the dialog cannot promise what the sweep will not do. An explicit press includes newly stamped keys; the automatic sweep still refuses them. Three tests on the rule directly, plus one proving the automatic path refuses while the press clears. Label stays "Clear Stale History Now" rather than "Compact", owner's call and the better argument: the name generalises to clearing stale history for other reasons later, such as #963's retention limit. 14 widget tests and 34 storage tests. Full suite 1,502 pass, 1 skipped. analyze clean, format clean. Task: meshcore-open-gan Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	3168c413c9	feat(#966): a durable audit of what the sweep deleted ... The owner asked whether the delete and compact are logged or silent. Checked rather than assumed, and the answer was bad on two counts: - A delete logged only a COUNT. "Cleared 40" names nothing, so there was no record of WHICH keys were reclaimed. Refusals were already logged properly, with the key and up to three missing records; deletions were not. - All of it goes through appLogger, which is gated on appDebugLogEnabled. That is off by default and off on his install, so on a normal install an irreversible delete left no trail at all. Both fixed. The summary now names the cleared and kept keys, and the sweep also writes a durable entry into the database itself, under __msgrows_reclaim_audit: timestamp, the cleared keys in full, the refused keys, and the byte counts either side. In the database because that survives restarts and the logging toggle, and can be read back without the app running, which is also how it gets verified on hardware. Key lists are stored in full. Truncating them would recreate the "Cleared 40" problem the entry exists to solve. Capped at the last 5 sweeps instead, which is generous given a key is cleared once and then has no blob to consider again, so this is close to a once-per-install operation. A failure to write the audit is logged and tolerated rather than failing the sweep: the deletes already happened and were each verified, so losing the record is worse than nothing but far better than reporting a correct sweep as broken. An unreadable audit likewise starts a fresh list and is logged, never silently replaced. scoping_inventory gained the key, globalOnPurpose: one sweep spans every radio and the entries name store keys that already carry the radio. Six tests: a sweep records which keys it deleted; the entry survives a fresh store object over the same database, so it is really on disk; refusals are recorded too; a sweep that did nothing writes no entry; the cap drops the oldest and keeps the newest; and an unreadable audit does not stop a sweep. Lands on Epic B's branch rather than Epic A's, where the sweep lives, to avoid restacking B over a changed A for a change that reaches dev through both either way. Origin is #965's engine. Full suite 1,489 pass, 1 skipped. analyze clean, format clean. Task: meshcore-open-gan Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	cc2fb23b2e	feat(#966): Clear Stale History Now, with refusals reported ... Epic B of #962. The manual trigger for Epic A's sweep, so a user does not wait 30 days. It passes olderThan: Duration.zero, which skips the WAIT and not the safety: the per-key verification inside reclaimVerifiedHistoryBlob is unchanged, proved by a test that Duration.zero still refuses a key whose rows cannot be verified. Its own widget rather than another card in app_settings_view.dart, which is already past a thousand lines, and so the tests can drive it without standing up the whole settings screen. Stateful against the repo's usual StatelessWidget-plus-Consumer habit, because the running flag and the last result are local to this card and belong to no service. The sweep is INJECTED, and that is a finding rather than a convenience. The first version of the widget test called the real sweep and hung past ten minutes instead of failing: the sweep uses compute, and an isolate deadlocks pumpAndSettle inside flutter_test's fake-async zone. A widget test should test the widget. So the card takes the sweep and the size read as parameters, the nine widget tests feed outcomes in directly, and the two new tests in stale_history_sweep_test.dart keep the injected semantic honest under plain test() where isolates work. Owner decision 2026-10-22, and the reason this Epic exists: the button REPORTS keys it refused, it does not only log them. "Cleared 1 old copies, 16.0 MB returned" and "Kept 1 that could not be verified" are both shown, including when a refusal is the reason nothing was cleared, which is the most important case to surface rather than the least. The automatic sweep stays log-only. Two Gemini findings, both fixed: - A fast double tap ran two sweeps. The disabled button is not enough on its own, because setState only SCHEDULES a rebuild, so two taps inside one frame both see a live onPressed. _clear now returns early on _running, and a test taps twice in one frame and asserts the sweep ran once. Two concurrent sweeps would have meant two concurrent VACUUMs. - A throw after real deletes was reported as a total failure. The honest fix was in the sweep, not the string: a successful sweep must not become an error because the closing size read threw, so that read now falls back to bytesBefore, which understates the reclaimed figure rather than inventing one. The failure string no longer claims nothing happened either. Strings are English-only, as everywhere else here: gen-l10n falls back to the template locale, and untranslated.json records the 9 keys across 17 locales, which is what that tracked file is for. 29 tests in the two files, full suite 1,483 pass, 1 skipped. analyze clean, format clean. Task: meshcore-open-gan Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	84c2dbd9da	fix(#965): act on the Gemini gate findings ... Three findings, all addressed. One was a real data-loss hole. 1. CRITICAL, fixed. missingFromRows trusted the converter's own output as the measure of the converter. A callback that silently dropped a record, rather than throwing, would have had every record it DID produce found present, returned "nothing missing", and the blob holding the only copy of the dropped one would have been deleted. The migration gate has always guarded this with an independent countJsonArrayElements in a separate compute; the verify path I added did not, which left the two halves of the same rule unequal. It now does the same cross-check and refuses as unverifiable on a mismatch. New test: a converter that drops its last row is refused with missing == null, not missing == []. 2. Measured, not redesigned. VACUUM takes an exclusive lock, and the review called it a UI freeze. It is not: drift_flutter runs SQLite in a spawned isolate (_isolateEntrypoint -> DriftIsolate.inCurrent, verified in the package), so database access queues behind it while the UI thread stays free. That is a stall on history-backed reads, not an ANR, which is the distinction that matters for an app whose storage work began as an ANR investigation. It is also close to once per install, since a cleared key has no blob to consider again. The duration is now logged, because 0.6 s on the owner's 70.9 MiB database is a number worth watching in the field rather than assuming. 3. Fixed, and the review was right about why. The non-history-key test asserted only that the isHistoryKey helper returns false, which would still pass if run() stopped calling it: the loop visits keys that HAVE rows, and contacts and friends normally have none, so they were never reachable anyway. Those keys now get a planted row and a 99-day-old timestamp, so the prefix guard inside run() is the only thing standing between them and a delete. Also carried over from the previous round: the check-then-delete window is closed by BlobStore.reclaimVerifiedHistoryBlob, which holds the per-key lock across both the verify and the delete and so also serialises the sweep against a migration or a blob merge on the same key. Two tests cover it, including that a second call on a blobless key reports neither a delete nor a problem, which is what makes a repeat sweep silent. On the owner's database 7 of 47 aged keys are in that state, having migrated through the empty-blob path. 18 tests in the file, full suite 1,472 pass, 1 skipped. Re-verified against a copy of the owner's real database after the changes: blob keys: 477, migrated history keys aged: 47 cleared 40, refused 0, 17362944 bytes returned (16.56 MiB) kept keys missing: 0, byte-changed: 0 integrity_check: ok, rows 29950 -> 29950 Task: meshcore-open-5vt Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	1b38c674e4	feat(#965): per-key migration timestamps and the stale-blob sweep ... Epic A of #962. The engine only; the manual action is #966. A1 wrote the diagnosis as failing tests first, and they were red for the right reason: no sweep existed and six BlobStore methods did not. Also lands a control test asserting that DELETE alone does not shrink the database, which passes today and must keep passing, since it is the entire reason a VACUUM step exists. A2, the timestamps. A second blob, __msgrows_migrated_at, keyed by store key. Deliberately NOT a reshape of __msgrows_migrated: that marker is read on every save and every load through a cache, so changing its shape would put a migration of its own on the hottest storage path. Owner decision 2026-10-22. An install that migrated before this ships has no timestamp, so backfillMigratedAt stamps it on FIRST SIGHT and the sweep skips anything it stamped this pass: updating the app can never delete a blob on the spot, and every key gets the full 30 days measured from when we first knew about it. A3, the sweep. Eligibility is age plus a fresh verification, never the marker alone, which is the difference between "we recorded that this migrated" and "we just confirmed it". missingFromRows returns null for "could not tell" and an empty list for "verified nothing missing", and those are deliberately different values: collapsing them is how the only copy of an unreadable history gets deleted. A4, one VACUUM, only when something was deleted. A failure there is logged and tolerated: the deletes already happened and were each verified, so it costs space and not data, and the next sweep retries it. The comparison rule now lives in ONE place, _absentFrom, used by both the migration gate and the sweep. The gate still decodes its own blob, because a second compute over multiple megabytes on the migration path would cost more than the duplication saves, so the rule is shared even though the decode is not. Wired into main.dart's existing post-frame callback, beside the #906 exit-info collector, for the same reason: storage hygiene must never be on the path to a usable screen. The catchError sits at that fire-and-forget call site rather than inside run(), so #966's button still gets a failure it can report. scoping_inventory gained the new key, because the #853 gate caught it exactly as designed. Its verdict is globalOnPurpose for the same reason as the marker: it is keyed BY store keys that already carry the radio. 15 tests, the plan's whole acceptance bar: the 29-day and 30-day boundaries; one missing row refuses AND the same key clears once its rows are complete, which is what proves the gate discriminates rather than never deleting; an undecodable blob refuses; an unstamped key is stamped not deleted; an unmigrated key is untouched; contacts, discovered_contacts and path_history_ are asserted non-candidates BY NAME; a DM key sweeps through the DM converter; and every kept blob is byte-identical across the sweep and VACUUM with the row count unchanged. A5, verification against a copy of the owner's real database through the production sweep: blob keys: 470, migrated history keys aged: 47 cleared 40, refused 0, 17367040 bytes returned (16.56 MiB) kept keys missing: 0, byte-changed: 0 integrity_check: ok, rows 29949 -> 29949 47 aged and 40 cleared because the other 7 migrated through the empty-blob path and never had a blob to reclaim. Full suite 1,469 pass, 1 skipped, up from 1,454. analyze clean, format clean. Task: meshcore-open-5vt Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	5f79c6e1db	fix(#943,#952): act on the Gemini gate findings ... Two of five findings were real. Log the downgrade refusal BEFORE the path lookup and the throw. onUpgrade runs inside drift's beforeOpen, so it fires on whichever isolate issued the first query, and whoever catches the exception decides what the user sees. A downgrade that only stopped background work, with nothing in the log, would be the quiet failure this branch exists to replace. The log line now lands first, so the record exists however the exception is handled. Strengthen the recovery bench. It asserted row COUNTS, so a converter producing the right number of rows with wrong contents would have passed. It now also checks that every identified blob record has a row carrying its identity, and that no payload is empty, both derived from the raw blob rather than from the converter under test so the check is not circular. Records with no messageId are not identity-checked, because reproducing the `x:` fallback key here would make it circular again; the count assertion still covers them. Verified on a copy of the owner's database with the trap reconstructed (the 6,308-message channel removed from the marker plus one planted row the blob does not contain): the key migrates, and all 6,308 identities are present. Then verified the new assertion can FAIL, by planting an empty payload the migration does not overwrite: Expected: empty Actual: WhereIterable<String>:['{}'] Three findings were rejected, with reasons in the PR body: the duplicate merge-key collapse is pre-existing and unchanged by this diff, the claimed migration/blob-save race cannot occur because of the re-check inside the per-key lock, and the path_provider call is bounded and already proven. Task: meshcore-open-lkp Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	b08b42bff8	fix(#943): refuse a newer schema loudly instead of rewriting the version ... Owner decision, 2026-10-22: downgrades stay unsupported, and must fail deliberately rather than silently. Before this, onUpgrade guarded on `from < 2`, so a database from a FUTURE schema fell straight through it. The open succeeded, and drift then stamped user_version back down to this build's 2, because it writes schemaVersion whenever the versions differed. The database's only record of having been on a newer build was destroyed, and a later run of that newer build would re-run its own upgrade against tables already in their new shape. onUpgrade now throws OffbandSchemaDowngrade when `from > to`, naming both schemas, saying the upgrade is one-way, and giving the database path when it can be resolved (path_provider has no web implementation, so the path is best-effort and the message stands without it). Not made to work, deliberately. Once a key is on rows its blob is frozen, so an older build would read stale history and write into the blob while this one reads rows, orphaning everything it received. Supporting a downgrade would mean dual-writing the blob on every save, which is the cost #917 exists to remove. The two tests that documented the old silent behaviour now assert the refusal, including that user_version is left at 3 on a file-backed database, which is the whole point of throwing. Three more guard the upgrade direction: an equal version takes neither branch, a fresh database still lands on 2, and a real 1 to 2 upgrade still carries its blobs across, since that is the path every existing install takes. Release-note disclosure and rollout staging are tracked separately. Task: meshcore-open-3e1 Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	eef192ea7f	fix(#952): the migration gate asserts a superset, not equal totals ... Four of the owner's store keys could never migrate to rows. Each held rows whose merge_key is absent from its blob (1, 3, 7 and 5 of them), and the readback gate compared the key's TOTAL row count against the number of distinct records in the blob. Those two numbers can never be brought level again: nothing removes the extra rows, and the frozen blob can never come to contain them. Every attempt refused, for good. His two largest channels were among them, 6,313 and 5,648 messages, so they kept re-encoding 3.77 MB and 3.55 MB of history on every save. That is the cost #920 removed and they were not getting it. No data loss: the blob stays complete and authoritative for a refused key. The gate asserted the wrong invariant. What it exists to catch is a record from the blob failing to reach a row, which is a SUBSET question. Equality became wrong the moment rows could legitimately hold messages the frozen blob does not, which is true for every migrated key the instant a new message arrives. - messageMergeKeys(storeKey) reads back the stored identities, and the gate now requires every deduped blob key to be among them. Rows beyond that are logged and accepted rather than treated as corruption. - The refusal log names how many records are missing and samples three, which is more use than the two totals it printed before. - The four keys need no healing migration: they migrate normally at next access, pinned by "a key stuck under the old gate recovers on next access". The step can still fail, and both halves of the loop are proved: a BlobStore whose insert silently drops a row is refused and stays on the blob, and a lossy converter is still refused before anything is written. Renamed the test file, since it now guards the gate rather than describing the trap it was written to demonstrate. Task: meshcore-open-lkp Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	e2b8970f1f	fix(#943): establish what governs a downgrade, and correct the claim in code ... #943 says drift "refuses to open a database whose user_version is newer than the binary's schemaVersion". That is wrong, and the real mechanism points somewhere else. drift has no newer-schema refusal. It compares the stored user_version against schemaVersion for INEQUALITY and routes both directions into onUpgrade ("Schema version upgrades and downgrades will both be run here"). The pre-#917 build declared schema 1 and no migration getter at all, so it got drift's default onUpgrade, which throws. That is why the owner's old install would not start: not a version check, but a missing strategy, so it never reached the blobs it would have found. The consequence matters for the decision. This build does NOT throw on a downgrade: the guard is `from < 2`, so a database from a future schema opens silently, and drift then stamps user_version back down to 2, erasing the only record that it has been through a newer build. The next schema bump inherits a silent failure rather than #943's loud one. - schema_downgrade_test.dart, six tests: a newer version reports as hadUpgrade rather than being refused; a bare strategy throws (the #943 failure); this build opens a schema-3 database without complaint; and it rewrites the version backwards. Two more pin that an equal version takes neither branch and that a fresh database still lands on 2, so the downgrade cases are genuinely testing the downgrade path. - Corrects the stale claim in offband_database.dart, which still told readers a downgrade finds its history. The merged plan was corrected in 4b8f5731; this is the same correction in the code it describes. Also lands migration_refusal_trap_test.dart for #952, found while gathering this evidence: four of the owner's store keys hold rows the blob does not, so the readback gate's equality check refuses them on every attempt, for good. Five tests, including the clean-key control and a check that no message is lost. Fix deliberately not included; #952 carries the decision. The three decisions in #943 are untouched and remain the owner's. Task: meshcore-open-3e1 Agent Mail: TealGlen Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	6574ecfa90	epic(#939): close the stale-read window, and a verdict on #190 ... Epic D of Feature #853. A different defect class from Epic B: these stores ARE correctly per-radio and bled anyway, through timing. **D2, #158: the window was an unexpected disconnect.** A manual `disconnect()` clears `_selfPublicKey`; `_handleDisconnection()` did not. So after a drop, every per-radio store, and the one `channels_screen` builds from `selfPublicKeyHex`, still held the previous radio's prefix. Connect a DIFFERENT radio and any read before its SELF_INFO landed served the old radio's history. That matches #158 being seen on desktop and not Android: it is a race, not a logic error. `_clearStorageScopeKeys()` now runs on an unexpected drop. It clears `_selfPublicKey` as well as the eleven connector-owned stores and StorageService, because `channels_screen` does not share those instances and derives its key from the getter, so clearing only the stores would have left that path reading stale. Verified before relying on it: every one of the thirteen per-radio stores guards on an empty key, in BOTH directions. I checked rather than assumed, because if any had used a bare prefix instead, clearing the key would have created a NEW unscoped global key, which is the exact bug class this Feature exists to remove. The names and deviceId stay, so the UI can still say which radio it is reconnecting to; only the data-scoping identity goes. **D1, #190: its named root cause is addressed, proven not argued.** #190 blamed slot-index keying with no PSK binding. Two mechanisms landed since: PSK-identity keying (#194) and the reuse-clear in `setChannel` (#193). Rather than assert that, there are tests reproducing #190's own scenario, a slot reassigned to a different channel: - keyed by PSK, the newly added channel reads a different key and sees nothing of the old occupant, which is #190's reproduction - the old occupant keeps its own history, because this is isolation by identity rather than deletion - the index fallback still works and still warns, pinning the remaining surface What remains of #190 is the index fallback firing before the channel list has loaded, which is #333 and a timing problem, so it belongs to this Epic rather than to #190. Recommendation for the owner: close #190 as superseded by #193, #194 and this Epic. Not closing it myself; it is his call and D1 was scoped as a verdict with evidence, not a closure. Suite 1,425 pass, analyze clean, format clean. Citadel: meshcore-open-pdx, meshcore-open-cwd Refs #939, #158, #190, #333, #853 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	afbab311e6	fix(#946): classify stock 1.18.0 by frame shape, not version suffix ... Real stock 1.18.0 reports its version as "v1.18.0-81dbae5" (semver + git-describe hash), which classifyVersionString reads as the Offband dual form. On a stock-shape (82-byte) frame the classifier treated that as an inverse conflict and failed closed to stockLegacy, so the Device CLI console (#883/#884) was hidden on every real stock 1.18.0 device. Found by E2.2 bench verification (#869) against a live device. An 82-byte device-info frame is definitively stock: the Offband fork always appends at least one caps byte (>=83 bytes). So a stock-shape frame is now classified by ver code alone, regardless of the version string. The fork-shape branch is unchanged - it still requires dual-version corroboration before emitting fork frames, the direction where being wrong is dangerous. Regression test uses the real hardware string v1.18.0-81dbae5. Full suite green (1394); Gemini 2.5-pro review found no defects. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	3 weeks ago
diffwireauto	a21ff98c6c	epic(#938): Blocked pane says "no radio" instead of "no blocked users" ... Epic C of Feature #853, carrying #507. Much smaller than the plan assumed, because `BlockedView` already existed and was already wired into Settings. What it did not have was the distinction #507 asked for, or any tests. **The gap.** With no radio connected the pane rendered "No blocked users", which is indistinguishable from a connected radio with an empty list. Since #471 made blocks per radio, that wording invited exactly the wrong conclusion: that the blocks had been lost. Now a disconnected pane says "No radio connected" and explains why ("Blocks belong to the radio that holds them"), because the reason is what stops it reading as data loss. English-only string additions per the repo convention; `untranslated.json` tracks the other 17 locales. **Tests: 5, and the first one has teeth.** I proved it by disabling the new branch and watching it fail: Expected: exactly one matching candidate Actual: Found 0 widgets with text "No radio connected" Then reverted. A test nobody has watched fail is not evidence, and this session has already produced three harnesses that reported success while measuring nothing. Covered, all through the widget rather than the service: - no radio says so, and gives the reason - a connected radio with nothing blocked says THAT - a block made on radio A is absent on radio B - switching back restores A's list, because isolation is not deletion - an unblock survives a switch and back, which is #507's clear-sticks case and the re-clear that #471 was about #507 also lists "migration drops the global keys". That already exists: `BlockService.loadForDevice` calls `_store.dropLegacyGlobal()` on every device load. Noted rather than re-implemented. Suite 1,419 pass, analyze clean, format clean. Still outstanding for this Epic: the T1000e hardware check #507 asks for, which is an owner step and the only part I cannot do. Citadel: meshcore-open-uu9, meshcore-open-9ft Refs #938, #507, #471, #853 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	a475cc21b4	task(#937): B2+B3 path history and delivery observations per radio ... Both scoped by the device-key prefix, and the legacy untagged data deleted per the owner's decision 1 rather than orphaned. **#854 path history: per radio AND out of SharedPreferences.** Two changes in one migration, because doing them separately means two migrations over the same data. The key was prefix + contact, so a route measured by a 1 W handheld was applied to a repeater and the reverse. It now lives in drift as prefix + device key + contact. The move out of prefs is not gold-plating: that one store held 2,092 keys and 86% of a 4.28 MB file, and every prefs write on Windows re-encodes the whole file (#923). This resolves #924 and makes every unrelated settings write cheaper in proportion. **#856 delivery observations: per radio, staying in prefs.** A repeater's 45-second deliveries were training the ACK-timeout model a 1 W handheld then used. One small key, 3,091 bytes and 14 entries on the owner's install, so unlike path history there is no cost argument for moving it and a move would be churn. **The legacy purge is chunked, and that is measured rather than guessed.** Each prefs `remove` re-encodes and rewrites the whole file, so I measured the real sequence against the owner's live prefs before designing it: 2,092 keys, 12.7 s of total work, mean 6.1 ms, but 32 ms for the first removal and under 1 ms by the last, because the file collapses from 4.28 MB to 45 KB as it goes. I had assumed ~57 s and was wrong; it is tractable. One unbroken pass would still block for 12.7 s, well past the 5 s watchdog, which is the exact failure #917 just fixed. So it yields every 20 removals. It runs after the startup loads so it never delays first paint, and it is idempotent: no writes once there is nothing left, so running it on every connect is safe. Legacy and new cannot be confused, which is what makes the purge safe: the new scheme writes to drift and the legacy keys are in prefs, so no length or shape heuristic is needed to tell them apart. That is decision 2 making decision 1 unambiguous. **Wiring:** StorageService is shared with PathHistoryService and TimeoutPredictionService, so the connector cannot own it like the other per-radio stores. It is injected from main() and fed the device key on SELF_INFO alongside them. Unset, both surfaces load nothing and never write, so a read before the handshake cannot serve another radio's data (#754 precedent). **Tests: Epic A's bleed tests inverted, 11 of them.** Every expectation that demanded the bleed now demands isolation, and the before/after is the git history of one file. Plus the purges: prefix-only, idempotent, and the scoped data surviving the purge of the unscoped. **Not done, and flagged rather than dropped:** the plan's B2 also said "bound what persists to what PathHistoryService actually caches". That bound existed to stop the prefs file growing. In drift a write costs one row and growth costs nothing per write, so the bound would now delete regenerable route history for no benefit. Skipping it is a judgement, not an oversight, and it is called out here and in the PR. The inventory's known-holes set is empty for the first time: {854, 855, 856} at Epic B's start, then {854, 856} after B1, now none. An Epic A sanity assertion that holes must exist failed on that and was corrected, because the invariant that matters is conditional: if a hole is declared it must name an issue, and empty satisfies it. Citadel: meshcore-open-0z3, meshcore-open-z8t Refs #937, #854, #856, #924, #853 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	a7882b62e0	task(#937): B1 delete the dead pending_messages API ... #855 was filed as "pending messages are stored globally, not per radio". It is not a scoping bug. `loadPendingMessages`, `savePendingMessages` and `clearPendingMessages` had no callers anywhere in lib/ or test/, and the key was absent from the owner's live prefs. The `_pendingMessages` field in message_retry_service.dart is an unrelated in-memory list that happens to share the name. So the surface is DELETED, not scoped: three methods and the key constant. Scoping it per radio would have been three careful changes and a migration decision, for an API nothing calls. This is the finding that justified consolidating #854, #855 and #856 into one Epic instead of landing three PRs. Nobody reading #855 on its own would have gone looking for callers, because the issue already told them what the fix was. Removed with it: - the inventory row, replaced by a comment saying the surface is GONE rather than reclassified, so the history is readable - A2's round-trip test, whose job was to prove the thing being deleted actually worked. It served that and then became a test of nothing - 855 from the known-holes expectation, which now reads {854, 856}; that set shrinking to empty is what closing Epic B looks like What still guards it: the inventory's "declared but vanished from source" check fires if `pending_messages` ever comes back undeclared. Citadel: meshcore-open-li1 Refs #937, #855, #853 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	9ffa9a3c0b	task(#936): A1 scoping inventory, with a gate that already caught four things ... Feature #853's acceptance bar is that every store has "a verified scoping verdict and no hole remains". Until now, verifying that meant a human re-reading an audit in an issue body, which is how three separate bleeds (#754, #854, #856) survived earlier rounds of bleed fixes. `scoping_inventory.dart` is that audit in code: every persistence surface with perRadio / globalOnPurpose / knownHole, a mandatory reason, and the file that owns it. A reason is required because an unexplained verdict is how a settled surface gets re-opened as a hole later. The test makes it a gate. It scans lib/ for the shape every key in this repo uses, a `const String` with a lower snake_case value, and fails when one is neither a declared surface nor an explicitly justified non-key. It also checks the reverse: a surface declared here but gone from the source. That one will fire when Epic B deletes `pending_messages`, which is intended. **It caught four things on its first two runs**, which is the argument for building it before Epic B rather than after: - `channel_cyr2lat_` and `contact_cyr2lat_` were never audited. #853 listed channel_settings_store as one surface; it owns two keys. - `los_error_elevation_unavailable`, a third error sentinel I had not found by hand. - `__msgrows_migrated`, declared by me and then reported missing, because my pattern required a letter first and internal markers start with underscores. The gate caught my own declaration bug. Scope of the scan, stated so nobody mistakes it for total: it would miss a key built inline with no constant, and a key that is not snake_case. Scanning every string literal in lib/ was tried and rejected, because it fires on asset paths and log tags, and a check that cries wolf gets worked around. That is the #927 lesson, which is also why there are three tests that prove this gate can fail rather than assuming it. Citadel: meshcore-open-z36 Refs #936, #853 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	b59bc728fc	fix(#471): don't offload the client block list onto a blank radio ... On connect, the block reconcile unioned the client's block list with the radio's and pushed the difference, so a fresh/erased radio (empty list) had every client block offloaded onto it and came up pre-blocked (#471, owner verdict ERROR). Owner decision: Option A. A radio that reports an EMPTY block list is treated as blank and is NOT auto-offloaded; the client stays the source of truth and blocks reach a radio only by explicit user action. A radio that already holds blocks still unions normally. Client-side only, no wire change. Added a setOffbandCapsForTest seam so the reconcile is testable. Part of radio-profile isolation Feature #853. The per-radio Blocked view + provenance (#507) is the follow-on. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	3 weeks ago
diffwireauto	a331075a8b	fix(#754): scope discovered contacts per radio ... Discovered contacts (nodes heard but not added) were stored under one global 'discovered_contacts' blob shared by every radio, so one radio's discoveries showed up while another was connected (#754, Feature #853). Scope the store by the connected device-key prefix like contact_store and the others; the connect block sets the key and the existing startup load clears + reloads the list for that radio. An unset key loads nothing and never writes, so it can't read or clobber the legacy shared blob. No migration: the legacy blob is orphaned and each radio's list self-heals as it re-hears adverts. Part of radio-profile isolation Feature #853. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	3 weeks ago
diffwireauto	8cea58ec1d	fix(#931): two defects from the second pre-PR review ... 1. existingFiles() walked hardcoded names with per-name exists(), so the periodic flush could rotate mid-walk and return a name it had just confirmed and rotation then renamed. Handing the share sheet a path that no longer resolves fails the WHOLE export, which is the exact failure the rotated-log fix existed to prevent. Now one directory listing, filtered and ordered by name. flushAndGetAllFiles() degrades to the active file if listing throws, because the logger cannot report its own listing failure anywhere, and one log beats none. shareLogs() also re-checks existence at the last moment, since a trace can be pruned between collection and share. 2. forceDartIsolateBlock used DateTime.now() for its deadline. The wall clock can move backwards, which would push the deadline away and leave the app frozen past the window or indefinitely, needing a force-kill on a test build. Now a Stopwatch, which is monotonic, matching what the Kotlin block already did with nanoTime. analyze clean, 1307 tests pass. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	4ab969b7a1	feat(#931): second ANR trigger that blocks the Dart isolate, not Kotlin ... The existing trigger hangs the Android main thread, so its trace is a Java stack. That proved the capture works and that our Kotlin frames resolve via the R8 mapping, but it cannot say whether our own DART frames survive into a trace, which is the question #906 was filed to answer. This one blocks the Dart UI isolate the way the real ANRs do rather than with an artificial spin: it repeatedly JSON-encodes a large nested structure shaped like the stores #334 is about. The Play clusters show the real ANRs inside the JSON stringifier and under allocation pressure, so a trace from this block should match their shape, and whether any of our Dart frames appear above those is then readable. It spins deliberately. Any await in the loop would yield to the event loop, the isolate would keep answering input, and no ANR would fire. If the process survives the full duration it logs why, so the tester is not left guessing. Gating is unchanged and still doubled: the bool.fromEnvironment constant keeps both rows out of any shipped build, and the owner-only Experimental section hides them again in a test build. Both rows are relabelled native side and Dart side so they are distinguishable. Tests: both triggers asserted to be immediate no-ops off Android, which matters because a missing platform guard would hang a desktop build instead of failing visibly. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	d2e9358f4d	fix(#910): four defects from the pre-PR review ... 1. The export shipped only the active log, and FileLogWriter._rotated was private, so offband.1.log and .2.log were unreachable by anything. An exit-record pointer line written at startup rotates out after a couple of MiB of ordinary logging, handing over a trace file with its metadata gone. FileLogWriter now exposes the files that exist, keeping the rotation naming where it belongs, and the mobile export attaches all of them. 2. dispose() called ioExecutor.shutdownNow() while a read could be holding a MethodChannel.Result. Interrupting it left the Result neither succeeded nor errored, so the Dart future never completed. Now shutdown(), with a disposed flag and a RejectedExecutionException path that always replies. 3. The trace read was skipped for REASON_CRASH_NATIVE on the assumption that its stream is always a protobuf. AOSP says a trace from an earlier ANR stays attached even when the process later died for another reason, so gating on the reason loses real text traces. The read is now attempted on every record and a printable-bytes check decides whether the content is usable. 4. The test-only main-thread block used a single Thread.sleep, which an interrupt could cut short: no ANR, no record, and a wasted trip to the hardware. It now sleeps to a deadline and ignores interrupts, which guarantees the duration without a busy-wait's CPU burn. Review also flagged that FileLogWriter can exceed maxBytes for a single oversized entry. That is pre-existing writer semantics, already pinned by a test in this branch, and deliberately not changed here. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	35e71a9eef	fix(#910): the ANR trigger subtitle told you the wrong thing ... It said hanging the UI makes Android raise an ANR. That is not true on its own. Android's documented trigger is 'has not responded to an input event within 5 seconds', and it documents no time-based trigger for a blocked main thread, so a freeze with nothing pending just recovers: no ANR, no process death, and no exit record to read back. The subtitle now says to keep tapping during the freeze, which is what actually queues the unanswered input the dispatcher measures. Without that the tester taps once, waits, sees nothing happen and reasonably concludes the feature is broken. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	94cc24a95f	fix(#910): hide the ANR test row off Android ... Exit records are Android-only, so on a desktop build the dart-define alone would leave a button that does nothing. The row now needs the flag and a supported platform. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	18e1453e1f	feat(#910): force-an-ANR trigger, compiled out of normal builds ... Hanging the main thread is the only way to produce a real REASON_ANR record to read back. No adb command induces an ANR: am crash produces a crash, and kill -3 dumps traces without a REASON_ANR death. So the test needs a trigger inside the app. Gated twice. The Experimental section ships in release behind a 7-tap unlock, which is not enough for a control whose job is to hang the app, so the row also sits behind a bool.fromEnvironment constant and is compiled out entirely unless a build passes OFFBAND_ANR_TEST. That flag is passed on the command line, never added to dart_defines.json, which feeds every build including Play. It is an action rather than a persisted toggle, so there is nothing for disableExperimental() to clear and app_settings.dart is untouched. The label is deliberately not localized, since it never reaches a user; the Observer rows in the same file set that precedent. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	31bdfb9489	feat(#910): ship ANR traces with the exported log ... shareLogs() exported exactly one file, the active offband.log, and the rotated .1.log and .2.log were never exported at all. So a trace written anywhere other than inline would never have reached anyone, and a trace written inline would later rotate out of the only file that ships. SharePlus already takes a list of files, so this attaches the trace files beside the log with no new UI and no new localized strings. Mobile only: the records are Android-only and the desktop path saves a single chosen file. Without this the Epic would ship and deliver nothing, which is why it is part of the build rather than a follow-up. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	24a1a741d7	feat(#910): Dart exit-record service, scheduled after the first frame ... Reads the records over the channel, logs one line per record whatever its reason (the owner's scope ruling on #908), and writes any ANR trace to a file beside offband.log. Dedup is a single persisted integer, the highest exit timestamp already logged. Records come back newest first, so a pass takes everything strictly newer than the watermark and then advances it to the highest seen; two records sharing a millisecond are both taken in that same pass, so neither is lost. A missing watermark is treated as a capped backfill and labelled as such, so a months-old ANR is not misread as fresh. Scheduled in a post-frame callback and deliberately not awaited, so startup time is unchanged. Every failure path writes a line and none is silent; a failed query leaves the watermark untouched so the next launch retries. An explicit flush follows the writes because FileLogService batches on a 2 second timer, and without it a startup line can be lost, leaving a trace file with nothing pointing at it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	28cdba8cb3	task(#920): B2 both message stores read and write rows ... A save is now one upsert per message in the list being saved, and costs the same with 50,000 messages of history as with 50. That is the Feature's "done when", and it is the part #919 could not deliver. Also gone: a delete is a single-row DELETE instead of rewriting the whole history, and a load reads only its own key's rows, ordered and pageable in SQLite. Load order matters and is deliberate. Rows are consulted first, but ONLY when rows actually exist. A key marked migrated with no rows still falls through to the legacy slot-index and unscoped-key adoption (#194, #306), because those run on blobs; short-circuiting on the marker alone would strand history stored under an older key. Adoption then hands its result to the migration, so the key ends up on rows either way. The blob path stays as the fallback for a key whose migration was refused. Refused keys keep working exactly as they did after #919: off the UI isolate, merge-not-overwrite, failing closed on an undecodable blob. Tested, including that a refused key does not accumulate half a history in rows. One unreadable row now costs one message. On the blob a single bad byte took the whole conversation with it. Clear paths had to learn about rows: a cleared channel or conversation that only dropped its blob would have stayed fully readable. clearAll also sweeps row-only keys, which no longer appear in a blob key listing. `encodeHistoryForTest` is new on both stores. The #919 tests built their blob fixtures by saving through the store and reading the blob back, which cannot work once saves write rows, and hand-written fixtures are what rotted the first time. They now call the stores' own encoder directly. Tests: 24 added, through the public store API only, because that is what an existing install hits on its first launch after this ships. Covered: blob adoption on first load and on first save, the windowed-save truncation case (#343), per-radio and per-contact scoping (#472), delete, clear, clearAll on row-only keys, a refused migration still serving reads and writes, and the payload being the stores' own encoding. Suite: 1,344 pass, analyze clean, format clean. Citadel: meshcore-open-tfq Refs #920, #917, #334 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	d20d567bba	task(#920): B3 blob-to-rows migration with a readback gate that can fail ... Per key, once: count the blob's records, convert it to rows off the UI isolate, insert them in one transaction, read the stored count back, and only then mark the key as reading from rows. **The blob is never deleted**, not even on a verified match. Rows become the read and write path; the blob is left untouched. Reclaiming that space is a separate owner-gated step, because the moment the delete runs is the moment a mistake stops being recoverable, and a downgrade to an older build still finds its history where it looks for it. Every failure leaves the blob authoritative and says so loudly: an undecodable blob, a converter that throws, a count mismatch, a failed insert. None of them retries, because a count that did not match once will not match on a loop. The migrated set is its own marker key, not "this key has rows". Those are different statements: a key can have rows and an incomplete migration at the same time, and treating rows as proof of completeness is how half a history would read as a whole one. An unreadable marker treats every key as unmigrated, which is the safe direction because the blobs are all still there. The first version of the readback gate was a check that could not fail. It compared the stored row count against the number of rows the converter produced, so a converter that silently dropped records matched itself and passed. Caught by a test built to drop a record. The blob's element count is now measured by a separate decode that does nothing but count, so the converter cannot report its own homework: `rows.length` must equal that count, and the stored count must equal the distinct identities. Both can fail independently, and together they close the loop from blob element to stored row. Duplicate identities in a source blob are deduped rather than refused. The old merge should not have produced any, but the legacy slot-index adoption path (#194) could have, and that must not read as data loss. Tests: 15, nine of them failure paths. The lossy-converter case is the one that caught the broken gate. Citadel: meshcore-open-x9q Refs #920, #917, #334 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	4d4d44a61a	task(#920): B1 message_records table and the per-message row API ... Schema 2 adds one row per message beside StoredBlobs, which stays exactly as it is. A save becomes an upsert of one row, so its cost stops depending on how much history is already stored. That is what #919 could not do: it moved the whole-history re-encode to another isolate, it did not remove it. Shape, and why it is this shape: store_key the EXISTING blob key, byte-identical merge_key the stores' existing _mergeKey identity timestamp_ms INTEGER, so ORDER BY and LIMIT run in SQLite payload the per-message JSON the stores already emit PK (store_key, merge_key), index (store_key, timestamp_ms) Reusing the blob key means every per-radio and per-channel scoping rule (#194, #472) carries over untouched, and the migration becomes a per-key operation with an exact record count to verify against. The payload is JSON rather than a column per field. A Message has 25 fields including three maps, two byte arrays and the translation set; hand-mapping them would mean trusting a new field-by-field converter against 41 MB of real history on its first run, and #355 cost 574 messages the last time a storage migration was hurried. With a payload column the migration is a pure re-key, the stores' existing encoders are reused verbatim, and a new message field needs no second migration. The trade is that message fields are not SQL-queryable; nothing asks for that today, and columns can be added beside the payload later without another data migration. Flagged for the owner on the issue before building it. The row API lives on BlobStore rather than in a second class because both APIs must share one OffbandDatabase: opening it twice is an error on the web backends, and a second singleton would be one mistake away from doing that. `limit` with no `offset` returns the NEWEST n, still oldest-first, because that is what a chat screen opens with. Tests: 18. The row set covers store-key scoping (a leak there would be a history bleed between radios), merge-key upsert, paging, per-row delete, and rows coexisting with a retained blob. The schema set builds a database that looks like one an older build left behind, v1 table with real data and user_version 1, and proves the upgrade runs, creates a usable table, leaves the blobs byte-identical and lands the index on both an upgraded and a fresh database. Citadel: meshcore-open-g6j Refs #920, #917, #334 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	1ed7581a51	task(#919): A3 both explicit delete paths off the UI isolate ... Deleting one message rewrites the entire blob, so on the owner's largest channel a delete blocked the UI for as long as a save did, right after the user tapped something. Both delete paths now go through `mergeOffThread`. Two call shapes, one helper. `mergeOffThread`'s second argument is renamed `incomingJson` to `payload`, because the callback decides what that string means: the incoming batch when saving, the target merge key when deleting. The method only carries it across the boundary. `dropFrom{Channel,Dm}HistoryJson` return null when the target is not in the history, so nothing is written at all. Re-encoding 5 MB to change nothing is exactly the cost this Epic exists to stop paying, and the old code did it on every miss. `MessageStore.removeMessage` also gains per-key serialisation it never had: it was a read-modify-write outside `BlobStore.synchronized`, so a save landing after a delete could resurrect the deleted message. There is a test for that race. Tests: 8 added in their own file, including both stores' public delete API, an absent target, an absent blob and a corrupt blob left byte-identical. Citadel: meshcore-open-z7c Refs #919, #917, #334 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	a2f172098c	task(#919): A2 DM save merges off the UI isolate ... `MessageStore.saveMessages` had the same read-modify-write as the channel store: decode the whole DM history, rebuild every record, re-encode it, all on the UI isolate, for every single message that arrives. Applies A1's helper. Only the incoming batch is encoded on the UI isolate; the decode, merge and re-encode go to another isolate via `mergeDmHistoryJson`, a top-level function so `compute` can send it. The five JSON helpers it needs are now static for the same reason. `mergeDmHistoryJson` throws on undecodable stored JSON rather than swallowing it, which `mergeOffThread` turns into a refused write. That is the same refusal the inline code made, and it is what stops a 5 MB history being replaced by the one message that happened to arrive. Tests: 6 added. Fixtures encode through the store's own encoder, never a hand-written map, because a hand-rolled fixture rots the moment a non-null field joins the schema. Includes a save round trip proving the second save merges rather than overwrites (#343). Citadel: meshcore-open-8sg Refs #919, #917, #334 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
diffwireauto	4ddb6a4358	feat(#919): move the channel-history merge off the UI isolate ... BlobStore.mergeOffThread runs the whole read-modify-write through compute(): stored JSON and incoming JSON in, merged JSON out, so only strings cross the isolate boundary and the object graph never does. Keeps the per-key serialisation that stops concurrent saves clobbering each other. channel_message_store.saveChannelMessages now encodes only the INCOMING messages on the UI isolate (normally one message, measured 0.002 ms) and hands the 5.38 MB decode-merge-encode to another isolate, where it measured 134 ms per save and crossed Android's 5s input-dispatch watchdog in a burst (#334). Fails closed: a stored blob that will not decode throws out of the merge, is logged, and the key is NOT written, which is the same refusal the inline code made. compute runs inline on web, which has no isolates; that is documented behaviour, not a silent fallback, and #920 removes the cost for every platform. _messageToJson, _messageFromJson, _mergeKey, _repeatToJson and _repeatFromJson became static so the top-level merge can call them; none touched instance state. 9 new tests cover merge equivalence, timestamp ordering, empty/absent blobs, the throw on corrupt JSON, fail-closed leaving the blob byte-identical, and three concurrent saves all surviving. Fixtures go through the store's own encoder rather than hand-written maps, after a hand-rolled fixture rotted on a non-null field. Refs #334, #917 Agent: TealGlen (session c61ce804) Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	3 weeks ago
Benjamin Wiechel	3055aab931	epic(#868): companion CLI codec, service, console + entry (F2/E2.1) (#903) ... * feat(#881): frame 66/29 CLI codec with cc| correlation Pure codec per the 1.18 contract: ASCII fail-closed builds, lenient reply decode, truncation bound judged on the raw payload. Gemini findings 1+2 fixed, 4 documented. Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(#882): local CLI service + shared cc| correlation helpers PrefixAllocator and splitCorrelated extracted; the repeater service delegates unchanged in behavior. LocalCliService runs correlated frame-66 round trips; the connector routes RESP 29 to listeners. Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * feat(#883): device CLI console screen The local-device counterpart of the repeater CLI screen (interop plan F2/E2.1): type a command, it goes to the connected radio over frame 66/29 via LocalCliService, and the correlated reply renders with a per-reply latency chip. No path/flood selection and no retries - one send, one frame-level timeout window surfaced as its own row. Built to the owner-approved behaviors: masked secret replies (long-press to copy, cleartext never in the widget tree), the 165-byte truncation badge, string-matched error styling, and command history. Entry point and population gating are #884, deliberately not here. Security fix surfaced by the #883 Gemini review: LocalCliService logged the cleartext of an unmatched (late) reply, so a secret reply arriving after its command timed out could leak to the app log despite the screen's masking. The log line now withholds the reply text (token + byte length only); a test pins it. Also replaces em-dash characters in the sibling E2.1 files flagged by the #464 CI guard. Tests: 12 widget tests for the screen and a service test for the log redaction. Full suite green (1207 passed). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * refactor(#902): declutter Settings - user-ops to Actions, reorder Debug Owner-directed Settings hygiene, split from the #884 entry point so the Device CLI row lands in a clean Debug pane. Moved to the Actions pane (they are user operations, not diagnostics): config Export/Import and the three GPX exports (the whole export card), plus "Sync queued messages now". Debug pane reordered to App Debug Logging, Companion Debug, App Debug, Serial Capture, Mesh Topology (which stays - useful diagnosing with a user). The Device CLI row at the top is #884, not here. Behavior preserved: every row keeps its handler, icon and copy; only their pane and order changed. Tests: a new widget test pins the spec - the moved rows present under Actions and absent from Debug, and the full Debug order. A Gemini review finding of a Debug-ordering defect was refuted (the order matches the spec; the review misread the toggle for the viewer); its secondary point was taken and the test now pins the full order. Full suite green. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * feat(#884): Device CLI entry point + capability gate Adds the entry point for the console (screen landed in #883) to Settings > Debug. A "Device CLI" row appears at the TOP of the Debug pane only when the classifier places the connected radio at stock v14+ (classification.allowsCliFrame): stock 1.18+ today, Offband at the upstream-1.18 absorb via the D1 seam. The row is absent on stock-legacy, Offband, and when disconnected (classification null). Tapping it opens DeviceCliScreen. The gate reads the capability through context.select, so only that boolean flipping rebuilds the pane, not every connector update (#81). Depends on the classifier from dev (merged into this branch). Tests: positive (stock 1.18 shows at top, opens the console) and three negatives (disconnected, stock-legacy ver 13, Offband all hidden). Per the Gemini review the test's frame helper now asserts the version fits. Full suite green (1244 passed). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#881): dart format the codec test (CI format gate) test/cli_command_codec_test.dart (landed in #881) was not formatted, so the branch's first run of the "analyze" job (flutter analyze --fatal-infos + dart format --set-exit-if-changed .) failed on it. No logic change. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * feat(#885): mirror set-name character rejection + CLI l10n The firmware's `set name` rejects the characters [ ] \ : , ? * and bounces a bad name as a cryptic ERROR. Mirror that client-side so the name is caught before it is sent, in both places a name is set: - Settings node-name dialog: live inline error, Save blocked on an invalid name (nothing sent). - Device CLI console: a `set name <value>` with a forbidden char is echoed with a rejection row and never sent; the device stays the authority for everything else. Shared validator in lib/helpers/device_name_validator.dart (forbiddenCharsIn is distinct + canonical-order). Also moves the "Sync queued messages now" row strings and the new validation messages onto app l10n (EN copy unchanged). Tests: validator unit (the exact seven chars, order-stable, deduped), console pos/neg (+ rejected command still recallable from history, per the Gemini review), and the Settings dialog pos/neg. Gemini review otherwise clean; its one finding (rejected command not in history) was refuted - history derives from the transcript, which the rejection path appends to - and pinned with a test. Full suite green (1255 passed). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: diffwireauto <330573775+diffwireauto@users.noreply.github.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com>	4 weeks ago
diffwireauto	285249ae7c	fix(#848): scope channel notify modes per radio, kill index fallback ... Channel notify modes lived in one global AppSettings map keyed by PSK or a bare slot index, so one radio's settings bled into another and set-and-back could not clear a stale alias (#839). Scope them by the connected device-key prefix like every other per-radio store (prefix -> pskHex -> mode); resolve All when the radio or PSK is unknown instead of falling back to the slot index; store a single entry per channel so All truly resets. One-time migration moves the legacy flat map and name-keyed mute set into the first radio synced after upgrade; later radios start clean. Removed the now-unused legacy muteChannel/unmuteChannel/isChannelMuted methods so mutedChannels is no longer a second, cross-radio source of truth (pre-PR Gemini review finding). Buzzer Inherit (#544/#545) reads the same path and inherits the fix. Epic #844. Build #848. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	c2ec7c55a9	fix(#880): replace em-dashes in source comments (CI guard #464) ... Comment-only; the analyze job's em-dash guard scans source files. Part of epic 866 (container not named in the scope per the push gate). Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	4 weeks ago
diffwireauto	3c4ac50bf6	feat(#878): version-string population parser ... classifyVersionString: stock = bare semver (optional v); Offband dual = semver-dash-remainder (ob-mc, X-X release images, git-describe bench tails); anything else is unknown and corroborates nothing. Stock pre-release suffixes are a documented fail-closed limitation. Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	4 weeks ago
diffwireauto	7aafeaa397	feat(#877): document + lock the ver-code population invariant ... Seven comparison sites dispositioned: pre-split floors (>=8, >=13) stay bare by design; fork floors are caps-anchored and now covered by a stock-ver-22 regression test. Channel-data bound is vacuous: the client never sends CMD_SEND_CHANNEL_DATA. Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	4 weeks ago
diffwireauto	20066c58cb	feat(#876): route caps parsing through the population classifier ... Device-info handling classifies the radio before reading any Offband byte; a conflict nulls caps/caps2/FEM and logs why. Capability bytes now also die on disconnect, like the ver code. Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	4 weeks ago
diffwireauto	6b509a38e1	feat(#875): DevicePopulation classifier + population fixtures ... Classifies the connected radio (stockLegacy / stockModern / offband) from device-info frame shape + ver code + version string; fails closed on conflicts and malformed input per the plan's can't-tell table. Gemini findings 1A/2 fixed (uncorroborated fork shape and inverse conflict both fail closed); finding 3 declined with justification on the issue. Agent: GentleGlacier (session f0c92a36) Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	4 weeks ago
diffwireauto	a69cb9987d	fix(#836): one discovery auto-retry over LoRa ... D1: first Discover attempt sometimes drops (normal LoRa packet loss); the retry gets through. Per owner (Option A), discoverRegions now makes up to 2 attempts (_discoverRegionsOnce), each using the firmware est_timeout; an unreachable repeater still ends in a timeout after both. Test: first attempt times out, second succeeds, two sends. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	e44f47b9df	fix(#830): count a direct (0-hop) repeater as a selectable path ... D1: the picker excluded direct repeaters. hasPath required a non-empty path, but a direct 0-hop repeater has pathLength 0 and an empty path, so the owner's own adjacent repeater was greyed as 'No stored path'. Direct is a reachable (best-case) route; hasPath is now pathLength >= 0, excluding only pathLength -1 (flood/unknown). The reply-path already sends zero-hop for direct, which is correct. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	5d56b0e8ba	fix(#830): path-aware repeater picker in Set Region Scope (D1 Option 1) ... The picker lists only repeaters with a stored path (the only ones that can answer), with a header note explaining that. Search surfaces pathless matches too, but greyed out and non-selectable with a 'No stored path' label, so the user sees the repeater exists and why it is blocked. Default selection skips pathless repeaters; Discover is disabled for them. Widget test covers hidden-by-default + greyed-on-search. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	665bbe1c68	fix(#836): multi-hop regions reply path + firmware-estimate timeout ... Discovery no longer caps the reply to zero-hop. discoverRegions now sends the repeater contact's stored path as the reply path (the firmware routes the reply back along it as-is, Mesh.cpp:176-177), so a multi-hop repeater can answer. The discovery timeout re-arms to the firmware's own est_timeout from RESP_CODE_SENT (scales with hops) instead of a fixed 10s. The repeater list is never filtered on path/hops, since stored paths go stale as the companion moves (owner guidance). An unknown/stale path still surfaces as a plain timeout, not a silent drop. Test covers the path being used as the reply path. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	2c4c64131b	fix(#836): correct anon-regions request format + reply correlation ... D1 found Discover Regions got no reply from the owner's repeater. Root cause (firmware BaseChatMesh.sendAnonReq): the firmware prepends its own 4-byte tag, but buildAnonRegionsRequestFrame also prepended a timestamp, shifting the request-type byte so the repeater dispatched it as a login, never regions. And discoverRegions correlated on a client-invented tag, not the firmware tag the 0x8C echoes. Fix: request payload is [0x01][reply_path_len] (no timestamp); discoverRegions learns the tag from the RESP_CODE_SENT ack via the frame stream and matches the 0x8C by it. Removed the dead tag map + 0x8C switch case. Tests corrected to the real contract (they had encoded the wrong one). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	f26fdabe95	fix(#830): alpha-sort + searchable repeater picker in Set Region Scope ... D1 hardware finding: the repeater picker was an unsorted, unsearchable dropdown, unusable with many repeater contacts. Replaced with a case-insensitive alpha-sorted, searchable list; discovered regions are alpha-sorted too. Widget test asserts sort order and search filtering. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	48b39f9666	fix(#831): clear region send-scope even when setting it throws ... Pre-PR Gemini review (Epic #815) flagged a scope leak: setChannelSendScope was outside the try, so a lost ack after the firmware applied the scope skipped the clear, and the next unscoped channel send would ride the stale scope. Moved the set inside the try so the finally always clears. Regression test asserts a clear is attempted when the set throws. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago
diffwireauto	24ca2abe3a	feat(#830): channel Set Region Scope action + picker (Epic #815 C2) ... A firmware-gated channel overflow action opens a picker that discovers regions from a chosen repeater (reusing RegionDiscoveryService), lets the user select a region or None, and persists it via connector.setChannelRegionScope (C1 store). The dialog is decoupled (data + callbacks + injected service) for widget testing. l10n added. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	4 weeks ago