Consume the additive OCFG_BROKERS dump fields from firmware #172/#173
(backward-compatible — absent fields read as today's enabled/disabled):
- BrokerRuntimeState (`state`) + BrokerLastError (`last_error`) + a pure
BrokerConfig.status mapping -> Connected / Connecting / Failed (reason) /
Held (no clock|low heap) / Enabled / Disabled; held shown neutral, not error.
- Brokers list shows the real status line + colour instead of just "enabled".
- Editor shows jwt_owner / iata_override resolved defaults (`jwt_owner_resolved`,
`iata_resolved`) as greyed placeholders when the raw key is blank; only writes
the raw key when the user enters a value (blank stays the source of truth).
Sourced from the pool dump (getBrokers); getBroker's per-field GET list is
unchanged pending the firmware GET-ability answer on #173. Unit-tested mapping,
parsing, and backward-compat (9 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A firmware build can ACK a broker enable/disable as success without applying it
(HV4; meshcore-firmware#179). The quick toggle and the editor save previously
trusted the ACK and showed a success snackbar, so an ack-but-no-op looked like
it worked.
Both paths now SET, wait a short settle, re-read the slot, and report what the
device ACTUALLY did:
- applied -> confirm
- notApplied -> warn "possible firmware issue"; the editor stays and re-seeds to
the device's true state instead of popping a false success
- unverified -> re-read failed (e.g. an enable that rebooted the device)
Every device is treated identically: the UI reflects the re-read, never assuming
a change took that the device didn't confirm.
- BrokerConfig.classifyApply pure classifier + BrokerApplyOutcome (unit-tested)
- ObserverConfigService.applySettleDelay
- wired into mqtt_brokers_screen quick toggle + broker_editor_screen save
- widget test for the ACK-but-not-applied path
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware feedback: JWT owner defaults to the device pubkey and IATA override
is optional by definition, so gating a save on them is wrong -- they have
under-the-hood firmware defaults.
BrokerConfig.enableError now checks only the structural fields with no default:
URL present, port in range. The JWT field checks are gone; the firmware enforces
JWT completeness with its defaults, and a genuinely-bad enable surfaces the
firmware's reason via the failure messaging added earlier. The editor's pre-save
check and the list's quick Enable both follow.
Tests updated to the new contract (a JWT broker with blank owner/audience now
enables; a structurally-complete quick Enable confirms). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
On-hardware test feedback:
- Long-press Enable/Disable was silent on success AND failure. It now confirms
on success and, on failure, surfaces the device's reason (lastError) instead
of nothing.
- The client now refuses to quick-Enable a broker that can't work (incomplete
required fields, e.g. JWT without audience/owner) and says why -- so it never
reports "enabled" on a broker that won't run. (Firmware should reject too.)
- The editor blocked a DISABLE on blank/invalid fields. Validation now gates
ENABLING only -- disabling a slot with partial values is fine; it won't be
active.
Validation rules shared via BrokerConfig.enableError (editor pre-save + list
quick-Enable). Full suite green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clock setting (System / 12h / 24h) in App Settings; chat times follow it + locale.
- Channel tile: always-on metadata row - time + hops on inbound, time + cell_tower
heard count + status on outbound - decoupled from the message-tracing toggle. The
via-path stays behind tracing.
- Drop the auto reply-to block and the most-recent-sender guess; @mentions now
render inline in the message text.
- Direct chat: same clock-aware time formatting.
Closes#37
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware path-length byte packs hop count (low 6 bits) and hash
width (high 2 bits) into one byte. The UI used it raw, so a 4-hop/2-byte
path showed as "68 hops" and the path list rendered per byte (8 entries
for 4 hops), and a 2-byte region mismatched a 1-byte one.
- Add pathHopCount/pathHashSizeBytes decoders (meshcore_protocol.dart)
- Add ChannelMessage.hopCount / pathHashSize getters; decode at display
and leave the stored pathLength untouched so the duplicate-merge in
the connector stays self-consistent
- Add an always-visible per-message hop-count badge in the channel chat
- Group path bytes into hash-width hashes in the chat "via" line and the
Message Details screen, using each packet's own width so mixed
1/2/3-byte feeds render correctly side by side
Verified against live BLE traffic (mixed 1-byte and 2-byte senders).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
this adds the actual last modified timestamp when present, before we used
last advert time as last modified in error
also sets _pendingInitialContactsSync to true on first connect over BLE
- Introduced translation functionality in chat screen, allowing users to translate messages before sending.
- Added MessageTranslationButton to the input bar for enabling/disabling translation.
- Implemented translation service to handle incoming and outgoing text translations using llama models.
- Enhanced message storage to include original and translated text, language codes, and translation status.
- Created UI components for displaying translated messages and managing translation options.
- Added translation model management, including downloading and storing models locally.
- Updated app settings to manage translation preferences and model selections.
- Companion radio stats: poll and display noise floor, RSSI, SNR, airtime
with dedicated ValueNotifier and ref-counted polling
- Adaptive RF-aware TX backoff based on radio conditions instead of fixed 5s
- Variable-width path hash support (1-3 bytes per hop)
- Air activity dot indicator in app bar with tap to open stats screen
- Jump to oldest unread setting for chat screens
- 1s send cooldown on DM and channel messages
- Link style: theme-aware orange, added EmailLinkifier
- New languages: Hungarian, Japanese, Korean
- Remove dead DeviceScreen and BatteryIndicatorChip
- Remove wakelock_plus dependency
- TX power fields now read as signed int8
- Implemented radio statistics features in multiple screens including chat, channels, and settings.
- Added localization for new strings in Swedish, Ukrainian, and Chinese.
- Introduced a setting to jump to the oldest unread message in chat and channels.
- Enhanced path management and display for contacts and messages.
- Updated app settings to include new boolean for jumping to the oldest unread message.
- Improved battery indicator and radio stats display in the app bar.
- Removed unused wakelock_plus dependency and updated plugin registrations.
- Added storageUsedKb and storageTotalKb properties to MeshCoreConnector.
- Updated battery and storage frame parsing with improved error handling.
- Refactored log RX data handling to use BufferReader for better readability and error management.
- Enhanced message parsing in ChannelMessage and Message classes to utilize BufferReader.
- Introduced new text type for signed messages in meshcore_protocol.dart.
- Updated BLE debug log screen to use BufferReader for payload parsing.
- Refactored message retry service to handle ACK hashes as integers instead of Uint8List.
- Improved message storage serialization and deserialization to accommodate new expectedAckHash type.
- Added wasPulled property to Contact model for better state management.
* feat: Enhance privacy settings and telemetry
- Implemented telemetry options for contacts, allowing users to enable or disable telemetry data sharing.
- Introduced a clear chat option in the chat interface for better message management.
- Updated the telemetry screen to handle telemetry data for contacts, including battery level.
- Refactored contact settings to include telemetry options and improved UI for better user experience.
* feat: Refactor repeater resolution logic across multiple screens
Train a linear regression model on actual message delivery times to
predict tighter timeouts, replacing worst-case physics estimates.
Features: path length, message bytes, seconds since last RX, flood mode.
Global model with per-contact blending after 10+ observations per contact.
Falls back to existing physics formula when model has insufficient data.
* Refactor contact handling: replace DiscoveryContact with Contact, update related methods and settings
* Enhance contact handling: include latitude, longitude, and last modified timestamp in contact updates; refactor path handling to accommodate discovered contacts across multiple screens
* Enhance SNRIndicator: include discovered contacts in name resolution for repeaters
* Refactor path handling: replace addReturnPath with buildPath to improve path construction logic and handle target contact types
* Update lib/screens/map_screen.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add localization for "Show Discovery Contacts" in multiple languages and refactor location plausibility check in map screen
* Enhance contact management: update discovered contacts' active status and improve contact handling with flags and raw packet data
* Refactor ChannelsScreen: pass ChannelMessageStore to buildExpandedContent and ensure messages are cleared after channel creation
* Update MapScreen: adjust label zoom threshold and refactor guessed marker building to include labels
* Refactor ChannelsScreen: change channelMessageStore to a private getter and update its usage in buildExpandedContent calls
* Enhance location plausibility check: add latitude and longitude bounds to ensure valid coordinates
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Refactor MeshCoreConnector and related stores: update discovered contacts handling, migrate legacy keys, and set public key in community store
* Refactor MeshCoreConnector and ChannelsScreen: update discovered contacts handling and set public key in community store; enhance location plausibility check in MapScreen
* Update CMD_ADD_UPDATE_CONTACT frame format to include optional latitude and longitude fields
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Adds map_showGuessedLocations and map_guessedLocation to app_en.arb and translates them across all 14 supported locales. Regenerates dart localizations.
- Translated contact settings and related strings in Slovenian, Swedish, Ukrainian, Chinese, Dutch, Polish, Portuguese, Russian, and Slovak.
- Added new strings for discovered contacts actions such as adding, copying, and deleting contacts.
- Enhanced the DiscoveryContact model to include a rawPacket field for better data handling.
- Updated the contacts screen to support new actions in the context menu for discovered contacts.
- Improved the contact discovery store to handle the serialization of the new rawPacket field.
- Implemented contact settings in localization files for Swedish, Ukrainian, and Chinese.
- Added new DiscoveryContact model to handle discovered contacts.
- Created DiscoveryScreen to display discovered contacts with filtering and sorting options.
- Integrated contact discovery storage to persist discovered contacts.
- Updated settings screen to include options for automatic contact addition.
- Enhanced app bar and list filter widgets for better user experience.
- Fixed variable naming inconsistencies in contact model.
* feat: add LOS workflow, global units, l10n cleanup, and mobile UI overflow fixes
Squashes prior PR commits into one changeset including: LOS map/service/tests, global metric/imperial unit system adoption, notification/BLE safety fixes, app-wide localization backfill/mojibake cleanup, and responsive UI title/overflow hardening.
* l10n: revert unrelated locale churn for LOS feature
* feat: keep LOS with app-wide unit settings
* fix: resolve post-merge app bar/import analyzer errors
* style: format screen files for CI
* Refactor Cayenne LPP parsing with error handling and logging
- Added error handling and logging to the Cayenne LPP parsing methods to manage malformed data gracefully.
- Improved the structure of the parsing logic for better readability and maintainability.
- Updated the Contact model to include error handling during frame parsing.
- Refactored Channels, Contacts, Map, and Neighbours screens to utilize a new AppBarTitle widget for consistent app bar design.
- Enhanced the BatteryIndicator widget to display SNR information for direct repeaters.
- Introduced SNRUi class for better management of SNR icon and text representation.
- Improved error handling in PathTraceMap and Neighbours screens to log errors appropriately.
* Fix trace route bytes generation logic in Contact model
* Ignore advertisements from self in MeshCoreConnector
* Refactor PathTraceData to use List<double> for snrData and adjust data mapping in PathTraceMapScreen
* Add SNRIndicator to AppBar and refactor BatteryIndicator layout
* Enhance path management dialog to display direct repeaters with color coding based on signal strength
* Remove unused import from SNR indicator widget
* Update lib/models/contact.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/connector/meshcore_connector.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/screens/path_trace_map.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/widgets/battery_indicator.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update lib/helpers/cayenne_lpp.dart
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Refactor packet handling to skip only the RSSI byte for improved reliability
* Add SNR indicator localization and update UI references for nearby repeaters
* Handle loading state and error parsing in PathTraceMapScreen; update SNR indicator dialog content layout
* Throw an exception for unsupported LPP types in CayenneLpp class
* Refactor AppBarTitle widget to remove unused style parameter; update related screens to reflect changes
Improve SNR handling by adding validation for spreading factor range in snrUiFromSNR function
Update contact handling in MeshCoreConnector to fix variable naming and improve readability
Stop parsing unsupported LPP types in CayenneLpp to avoid misalignment
* Sort direct repeaters by last updated time and SNR; limit to top three for improved path management dialog
* Prevent notifications for chat and sensor adverts without a valid path
* Implement ranking system for direct repeaters based on SNR and recency; update related UI components to reflect changes
* Refactor localization keys for "neighbors" terminology across multiple languages
- Updated localization keys from "neighbours" to "neighbors" in the following files:
- app_localizations_bg.dart
- app_localizations_de.dart
- app_localizations_en.dart
- app_localizations_es.dart
- app_localizations_fr.dart
- app_localizations_it.dart
- app_localizations_nl.dart
- app_localizations_pl.dart
- app_localizations_pt.dart
- app_localizations_ru.dart
- app_localizations_sk.dart
- app_localizations_sl.dart
- app_localizations_sv.dart
- app_localizations_uk.dart
- app_localizations_zh.dart
- Updated corresponding ARB files to reflect the changes in keys.
- Renamed the NeighboursScreen to NeighborsScreen in the chat and repeater hub screens for consistency.
* Adjust ranking calculation for direct repeaters by adding offset to SNR for improved accuracy
* Fix typo in variable name for second direct repeater in path management dialog
* Refactor ranking calculation for direct repeaters and update path handling in channel message screens
* Refactor path handling in ChannelMessagePathScreen to improve logic for outgoing messages and channel messages
* Fix AppBarTitle horizontal overflow with long titles (#187)
* Initial plan
* Wrap title Column in Expanded to prevent horizontal overflow in AppBarTitle
Co-authored-by: wel97459 <12990640+wel97459@users.noreply.github.com>
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: wel97459 <12990640+wel97459@users.noreply.github.com>
* Refactor AppBarTitle widget to simplify Text widget initialization
* Add "Show All Paths" feature to chat path management
- Implemented localization for "Show All Paths" in multiple languages (DE, EN, ES, FR, IT, NL, PL, PT, RU, SK, SL, SV, UK, ZH).
- Updated path management dialog to include a toggle for showing all paths.
- Refactored path history display logic to conditionally show paths based on the toggle state.
- Cleaned up unused print statements and improved code readability in path tracing and chat screens.
* Refactor FeatureToggleRow visibility in chat and path management dialogs based on repeaters list
* Remove unused import of 'dart:ffi' in path_trace_map.dart
* Refactor repeater management logic and update UI state handling in chat and path management dialogs
* Refactor RX data handling and improve repeater management logic in chat and path management dialogs
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Copilot <198982749+Copilot@users.noreply.github.com>
Co-authored-by: wel97459 <12990640+wel97459@users.noreply.github.com>
fixes#72
- Removed preset configurations for 915 MHz, 868 MHz, and 433 MHz from the RadioSettings model.
- Introduced a new list of regional preset configurations for various countries.
- Updated the settings screen to use a dropdown for selecting presets instead of chips.
- Added a switch for enabling client repeat functionality with appropriate warnings for frequency usage.
- Updated localization files for multiple languages to reflect changes in settings related to client repeat functionality.
Strycher
ericz
HDDen
Enot (ded) Skelly
zjs81
Serge Tarkovski
zjs81
Winston Lowe
Ben Allfree
Krasimir Kazakov
just_stuff_tm