You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
141 lines
5.2 KiB
141 lines
5.2 KiB
# Qnet Gateway Configuration
|
|
|
|
ircddb = {
|
|
login = "CHANGEME!!!!"; # login callsign for the ircDDB network
|
|
# host = "rr.openquad.net" # other include group1-irc.ircddb.net
|
|
# port = 9007 # not a good idea to change!
|
|
# password = "1111111111111" # not needed for rr.openquad.net
|
|
}
|
|
|
|
gateway = {
|
|
# regen_header = true # regenerate headers from incoming data
|
|
# send_qrgs_maps = true # send frequecy, offset, cooridinates and url to irc-server
|
|
# local_irc_ip = "0.0.0.0" # 0.0.0.0 means accept any incoming connections
|
|
# aprs_send = true # send info to aprs
|
|
# ip = "127.0.0.1" # where the gateway is running
|
|
|
|
external = {
|
|
# ip = "0.0.0.0"
|
|
# port = 40000
|
|
}
|
|
|
|
internal = {
|
|
# ip = "172.16.0.1"
|
|
# port = 20000
|
|
}
|
|
}
|
|
|
|
module = {
|
|
a = { # an ICOM full stack might consist of up to three module
|
|
# Sorry, the 23 cm data module is not yet supported
|
|
# 23 cm module will use "a"
|
|
# 70 cm module will use "b"
|
|
# 2 M module will use "c"
|
|
# type = "icom" # you must define at least one module by uncommenting the type
|
|
# ip = "172.16.0.20" # all icom modules should have the same IP address
|
|
# port = 20000 # all icom modules should have the same UDP port
|
|
# frequency = 0 # in MHz, if you specify here, this frequency will show up on the QuadNet USER GATEWAYS webpage
|
|
# offset = 0
|
|
# range = 0 # the range of this repeater, in meters. 1609.344 meters is 1.0 miles
|
|
# agl = 0 # the height above ground level for this repeater's antenna
|
|
# latitude = 0 # you can leave this unspecified for a mobile rig
|
|
# longitude = 0 # like the latitude
|
|
# desc1 = "" # maximum of 20 characters, most special symbols are not allowed
|
|
# desc2 = "" # just like desc1
|
|
# url = "github.com/n7tae/g2_ircddb" # 80 characters max
|
|
}
|
|
|
|
b = {
|
|
# type = "icom"
|
|
# ip = "172.16.0.20" # all icom modules should have the same IP address
|
|
# port = 20000 # all icom modules should have the same UDP port
|
|
# frequency = 0
|
|
# offset = 0
|
|
# range = 0.0
|
|
# agl = 0.0
|
|
# latitude = 0.0
|
|
# longitude = 0.0
|
|
# desc1 = ""
|
|
# desc2 = ""
|
|
# url = "github.com/n7tae/g2_ircddb"
|
|
}
|
|
|
|
c = {
|
|
# type = "icom"
|
|
# ip = "172.16.0.20" # all icom modules should have the same IP address
|
|
# port = 20000 # all icom modules should have the same UDP port
|
|
# frequency = 0
|
|
# dvap_offset = 0
|
|
# range = 0.0
|
|
# agl = 0.0
|
|
# latitude = 0.0
|
|
# longitude = 0.0
|
|
# desc1 = ""
|
|
# desc2 = ""
|
|
# url = "github.com/n7tae/QnetGateway"
|
|
}
|
|
}
|
|
|
|
log = {
|
|
# debuging and extra logging switches
|
|
# qso = false # QSO info goes into the log
|
|
# irc = false # IRC debug info
|
|
# dtmf = false # DTMF debug info
|
|
}
|
|
|
|
aprs = { # APRS.NET connect info
|
|
# host = "rotate.aprs.net"
|
|
# port = 14580
|
|
# interval = 40
|
|
# filter = ""
|
|
}
|
|
|
|
link = {
|
|
# link_at_start = "NONE" # Link to a reflector at startup.
|
|
# to link repeater module B to REF001 C, use "BREF001C"
|
|
# ref_login = "" # for loging into REF reflectors, if undefined, ircddb.username will be used
|
|
# admin = [ "CALL1", "CALL2", "CALL3" ] # only these users can execute scripts, block dongles and reload the gwys.txt
|
|
# # you probabaly want you own callsign in the admin list!
|
|
# link_unlink = [ "CALL4", "CALL5", "CALL6" ] # if defined, only these users can link and unlink a repeater
|
|
# no_link_unlink = [ "CALL7", "CALL8", "CALL9" ] # if defined, these users cannot link or unlink, it's a blacklist
|
|
# # if the blacklist is defined (even if it's empty), the link_unlink will not be read
|
|
# incoming_ip = "0.0.0.0" # incoming ip address, "0.0.0.0" means accepts all connections.
|
|
# ip = "127.0.0.1" # where g2_link is running
|
|
# port = 18997 # port for communications to g2_link
|
|
# ref_port = 20001 # port for REF linking, don't change
|
|
# xrf_port = 30001 # port for XRF linking, don't change
|
|
# dcs_port = 30051 # port for DCS linking, don't change
|
|
# announce = true # do link, unlink, etc. announcements
|
|
# acknowledge = true # send text acknowledgement on key-up
|
|
# max_dongles = 5 # maximum number of linked hotspots
|
|
}
|
|
|
|
file = {
|
|
# status = "/usr/local/etc/rptr_status" # where repeater status info is passed between services
|
|
# DTMF = "/tmp" #
|
|
# echotest = "/tmp" # echo dat files will end up here
|
|
# qnvoicefile = /tmp/qnvoice.txt # where qnvoice will create the play command
|
|
# gwys = "/usr/local/etc/gwys.txt" # where the list of gateways and reflectors (with ports) is.
|
|
# announce_dir = "/usr/local/etc" # where are the *.dat files for the verbal link, unlink, etc. announcements
|
|
}
|
|
|
|
timing = {
|
|
timeout = {
|
|
# echo = 1 # delay time in seconds for echo
|
|
# voicemail = 1 # delay time for voicemail
|
|
# remote_g2 = 2 # after this many seconds with no packets, we assume the tx is closed
|
|
# local_rptr = 1 # local timeout, in seconds
|
|
}
|
|
|
|
play = {
|
|
# wait = 2 # seconds before playback occurs, between 1 and 10
|
|
# delay = 19 # microseconds between frames playback, if echo sounds bad, adjust this up or down 1,2 microseconds
|
|
}
|
|
|
|
inactivity = {
|
|
# a = 0 # unlink repeater if no activity for this many minutes
|
|
# b = 0 # zero mean there will be no timer
|
|
# c = 0
|
|
}
|
|
}
|