From 7e7a738b9982b480b5043b8883fb3a2eca33c446 Mon Sep 17 00:00:00 2001 From: Tom Early Date: Sat, 22 Feb 2014 11:55:34 -0500 Subject: [PATCH] Update README.md --- README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index fc0b6c1..babe7b1 100644 --- a/README.md +++ b/README.md @@ -9,7 +9,8 @@ Creating a portable DVAP hotspot based on a Raspberry Pi or a BeagleBone Black t As configured, this software requires a Debian or Debian-based Linux OS and is specifically designed for a Raspberry Pi (http://raspberrypi.org) on Raspbian Liunx or a BeagleBone Black (http://beagleboard.org) running Debian Linux. Depending on your knowledge with your choice of OS, you can probably get this to work on others as well. The closer you are to a Debian base, the easier it will be. -Start with a Raspberry Pi with the latest Raspbian image (see http://raspberrypi.org) or a BeagleBone Black with the latest Debian image (see http://www.armhf.com). Scott's software will EASILY fit on the on-board memory of the BBB, but you will still need a uSD card to install the armhf.com Debian image to the on-board memory. +Start with a Raspberry Pi with the latest Raspbian image (see http://raspberrypi.org) or a BeagleBone Black with the latest Debian image (see http://www.armhf.com). Scott's software will EASILY fit on the on-board memory of the BBB, but you will still need a uSD card to install the armhf.com Debian image to the on-board memory. If you are using Raspbian on a RasPi, be sure to configure Raspbian with the "sudo raspi-config" command. If you are using Debian on a BBB, be sure to look over the notes on expanding the uSD memory on the www.armhf.com website. + You will need several packages to build Scott's gateway. The RasPi will probably have all or most of these but it still doesn't hurt to be sure: