KB8PMY
/
MMDVM_HS
mirror of https://github.com/juribeparada/MMDVM_HS.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into duplex

Browse Source
pull/14/head
Andy CA6JAU 9 years ago
parent 98d19b18be 7d9a3ba593
commit cea661f533
16 changed files with 71 additions and 76 deletions
Show Stats Download Patch File Download Diff File

4
ADF7021.cpp
Unescape View File

@ -363,7 +363,11 @@ void CIO::ifConf(MMDVM_STATE modemState, bool reset)
ADF7021_REG2 = (uint32_t) 0b10 << 28; // invert data (and RC alpha = 0.5)
ADF7021_REG2 |= (uint32_t) (ADF7021_DEV_P25 / div2) << 19; // deviation
#if defined(ENABLE_P25_WIDE)
ADF7021_REG2 |= (uint32_t) 0b011 << 4; // modulation (4FSK)
#else
ADF7021_REG2 |= (uint32_t) 0b111 << 4; // modulation (RC 4FSK)
#endif
break;
default:

10
ADF7021.h
Unescape View File

@ -62,7 +62,11 @@ www.analog.com/media/en/technical-documentation/data-sheets/ADF7021.pdf
#define ADF7021_DEV_DMR 23U
#define ADF7021_DEV_YSF_L 18U
#define ADF7021_DEV_YSF_H 36U
#if defined(ENABLE_P25_WIDE)
#define ADF7021_DEV_P25 32U
#else
#define ADF7021_DEV_P25 22U
#endif
// TX/RX CLOCK register (REG 03)
#define ADF7021_REG3_DSTAR 0x2A4C4193
@ -142,7 +146,11 @@ www.analog.com/media/en/technical-documentation/data-sheets/ADF7021.pdf
#define ADF7021_DEV_DMR 14U
#define ADF7021_DEV_YSF_L 11U
#define ADF7021_DEV_YSF_H 21U
#if defined(ENABLE_P25_WIDE)
#define ADF7021_DEV_P25 21U
#else
#define ADF7021_DEV_P25 14U
#endif
// TX/RX CLOCK register (REG 03)
#define ADF7021_REG3_DSTAR 0x29EC4153
@ -220,7 +228,7 @@ www.analog.com/media/en/technical-documentation/data-sheets/ADF7021.pdf
#define ADF7021_SLICER_TH_DMR 57U
#define ADF7021_SLICER_TH_YSF_L 38U
#define ADF7021_SLICER_TH_YSF_H 75U
#define ADF7021_SLICER_TH_P25 52U
#define ADF7021_SLICER_TH_P25 47U
#endif

4
BUILD.txt
Unescape View File

@ -282,6 +282,10 @@ scanning over all enabled modes, and you could have some detection delay. Enable
#define SERIAL_REPEATER: enable a second serial port (USART2, pins PA2 and PA3) for Nextion
LCD display.
#define ENABLE_P25_WIDE: enable support for Motorola Wide P25 mod/demod in XTS3000 radios. Using
this mode improves RX BER. You need to enable this mode in your radio for each conventional
personalities.
Pinout definitions for ZUMSpot Libre Kit (Carrier board, RF7021SE + STM32F103 board):
=====================================================================================
- Main RF7021SE board:

12
Config.h
Unescape View File

@ -20,11 +20,11 @@
#define CONFIG_H
// Select one board:
// 1) Initial release of Pi HAT:
// 1) Initial release of ZUM-Spot Pi:
// #define PI_HAT_7021_REV_02
// 2) ZUM-Spot USB v0.1 and Pi HAT v0.3:
// 2) ZUM-Spot USB and ZUM-Spot Pi HAT:
// #define PI_HAT_7021_REV_03
// 3) Board with modified RF7021SE and Blue Pill STM32F103 (initial tests)
// 3) ZUM-Spot Libre Kit or board with modified RF7021SE and Blue Pill STM32F103
#define ADF7021_CARRIER_BOARD
// Enable ADF7021 support:
@ -45,9 +45,8 @@
// For 12.2880 MHz:
// #define ADF7021_12_2880
// AFC is enabled by default in D-Star
// Enable AFC support for DMR, YSF and P25 (experimental)
// AFC is already enabled by default in D-Star
// #define ADF7021_ENABLE_4FSK_AFC
// Configure AFC with positive initial frequency offset
// #define ADF7021_AFC_POS
@ -65,4 +64,7 @@
// Enable Nextion LCD serial port repeater:
// #define SERIAL_REPEATER
// Enable P25 Wide modulation
// #define ENABLE_P25_WIDE
#endif

2
DMRDMORX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "DMRDMORX.h"

2
DMRDMOTX.cpp
Unescape View File

@ -18,8 +18,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
// #define WANT_DEBUG
#include "Config.h"
#include "Globals.h"

6
DStarRX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
//#define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "DStarRX.h"
@ -291,7 +289,6 @@ void CDStarRX::processNone(bool bit)
// Fuzzy matching of the preamble sync sequence
if (countBits32((m_patternBuffer & PREAMBLE_MASK) ^ PREAMBLE_DATA) <= PREAMBLE_ERRS) {
DEBUG1("DStarRX: preamble detected, fuzzy");
// Extend scan period in D-Star, once preamble is detected
m_modeTimerCnt = 0;
@ -385,12 +382,11 @@ void CDStarRX::processData(bool bit)
bool syncSeen = false;
if (m_dataBits >= SYNC_SCAN_START && m_dataBits <= (SYNC_POS + 1U)) {
if (countBits32((m_patternBuffer & DATA_SYNC_MASK) ^ DATA_SYNC_DATA) <= DATA_SYNC_ERRS) {
#if defined(WANT_DEBUG)
if (m_dataBits < SYNC_POS)
DEBUG2("DStarRX: found data sync in Data, early", SYNC_POS - m_dataBits);
else
DEBUG1("DStarRX: found data sync in Data");
#endif
m_rxBufferBits = DSTAR_DATA_LENGTH_BITS;
m_dataBits = 0U;
syncSeen = true;

2
DStarTX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "DStarTX.h"

16
Debug.h
Unescape View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -19,8 +19,6 @@
#if !defined(DEBUG_H)
#define DEBUG_H
#if defined(WANT_DEBUG)
#include "Globals.h"
#define DEBUG1(a) serial.writeDebug((a))
@ -28,18 +26,6 @@
#define DEBUG3(a,b,c) serial.writeDebug((a),(b),(c))
#define DEBUG4(a,b,c,d) serial.writeDebug((a),(b),(c),(d))
#define DEBUG5(a,b,c,d,e) serial.writeDebug((a),(b),(c),(d),(e))
#define ASSERT(a) serial.writeAssert((a),#a,__FILE__,__LINE__)
#else
#define DEBUG1(a)
#define DEBUG2(a,b)
#define DEBUG3(a,b,c)
#define DEBUG4(a,b,c,d)
#define DEBUG5(a,b,c,d,e)
#define ASSERT(a)
#endif
#endif

17
Makefile
Unescape View File

@ -107,8 +107,8 @@ BINBIN=outp.bin
MCFLAGS=-mcpu=cortex-m3 -march=armv7-m -mthumb -Wall -Wextra
# COMPILE FLAGS
DEFS_HS=-DUSE_STDPERIPH_DRIVER -DSTM32F10X_MD -DHSE_VALUE=$(OSC) -DVECT_TAB_OFFSET=0x0
DEFS_HS_BL=-DUSE_STDPERIPH_DRIVER -DSTM32F10X_MD -DHSE_VALUE=$(OSC) -DVECT_TAB_OFFSET=0x2000
DEFS_HS=-DUSE_STDPERIPH_DRIVER -DSTM32F10X_MD -DHSE_VALUE=$(OSC) -DVECT_TAB_OFFSET=0x0 -DMADEBYMAKEFILE
DEFS_HS_BL=-DUSE_STDPERIPH_DRIVER -DSTM32F10X_MD -DHSE_VALUE=$(OSC) -DVECT_TAB_OFFSET=0x2000 -DMADEBYMAKEFILE
CFLAGS=-c $(MCFLAGS) $(INCLUDES) -DCUSTOM_NEW -DNO_EXCEPTIONS -Wno-unused-parameter
CXXFLAGS=-c $(MCFLAGS) $(INCLUDES) -DCUSTOM_NEW -DNO_EXCEPTIONS -Wno-unused-parameter
@ -138,6 +138,7 @@ debug: CXXFLAGS+=-g $(DEFS_HS)
debug: LDFLAGS+=-g
debug: release
release: GitVersion.h
release: $(BINDIR)
release: $(BINDIR)/$(BINHEX)
release: $(BINDIR)/$(BINBIN)
@ -172,6 +173,7 @@ $(BINDIR)/$(BINELF): $(OBJECTS)
clean:
$(CLEANCMD)
$(RM) GitVersion.h
stlink:
$(ST_FLASH) write bin/$(BINBIN) 0x8000000
@ -230,3 +232,14 @@ ifneq ($(wildcard /opt/openocd/bin/openocd),)
/opt/openocd/bin/openocd -f /opt/openocd/scripts/interface/stlink-v2-1.cfg -f /opt/openocd/share/openocd/scripts/target/stm32f1x.cfg -c "program STM32F10X_Lib/utils/bootloader/generic_boot20_pc13.bin verify reset exit 0x08000000"
/opt/openocd/bin/openocd -f /opt/openocd/scripts/interface/stlink-v2-1.cfg -f /opt/openocd/share/openocd/scripts/target/stm32f1x.cfg -c "program bin/$(BINBIN) verify reset exit 0x08002000"
endif
# Export the current git version if the index file exists, else 000...
GitVersion.h: .FORCE
ifneq ("$(wildcard .git/index)","")
echo "#define GITVERSION \"$(shell git rev-parse --short HEAD)\"" > $@
else
echo "#define GITVERSION \"0000000\"" > $@
endif
.FORCE:

2
P25RX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
// #define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "P25RX.h"

2
P25TX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
// #define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "P25TX.h"

61
SerialPort.cpp
Unescape View File

@ -18,11 +18,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
// #define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#if defined(MADEBYMAKEFILE)
#include "GitVersion.h"
#endif
#include "SerialPort.h"
const uint8_t MMDVM_FRAME_START = 0xE0U;
@ -74,15 +76,21 @@ const uint8_t MMDVM_DEBUG5 = 0xF5U;
#define DESCRIPTION "MMDVM_HS-ADF7021 20170521 (D-Star/DMR/YSF/P25)"
#endif
#if defined(GITVERSION)
#define concat(a, b) a " GitID #" b ""
const char HARDWARE[] = concat(DESCRIPTION, GITVERSION);
#else
#define concat(a, b, c) a " (Build: " b " " c ")"
const char HARDWARE[] = concat(DESCRIPTION, __TIME__, __DATE__);
#endif
const uint8_t PROTOCOL_VERSION = 1U;
CSerialPort::CSerialPort() :
m_buffer(),
m_ptr(0U),
m_len(0U)
m_len(0U),
m_debug(false)
{
}
@ -204,6 +212,8 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
bool ysfLoDev = (data[0U] & 0x08U) == 0x08U;
bool simplex = (data[0U] & 0x80U) == 0x80U;
m_debug = (data[0U] & 0x10U) == 0x10U;
bool dstarEnable = (data[1U] & 0x01U) == 0x01U;
bool dmrEnable = (data[1U] & 0x02U) == 0x02U;
@ -866,6 +876,9 @@ void CSerialPort::writeP25Lost()
void CSerialPort::writeDebug(const char* text)
{
if (!m_debug)
return;
uint8_t reply[130U];
reply[0U] = MMDVM_FRAME_START;
@ -883,6 +896,9 @@ void CSerialPort::writeDebug(const char* text)
void CSerialPort::writeDebug(const char* text, int16_t n1)
{
if (!m_debug)
return;
uint8_t reply[130U];
reply[0U] = MMDVM_FRAME_START;
@ -903,6 +919,9 @@ void CSerialPort::writeDebug(const char* text, int16_t n1)
void CSerialPort::writeDebug(const char* text, int16_t n1, int16_t n2)
{
if (!m_debug)
return;
uint8_t reply[130U];
reply[0U] = MMDVM_FRAME_START;
@ -926,6 +945,9 @@ void CSerialPort::writeDebug(const char* text, int16_t n1, int16_t n2)
void CSerialPort::writeDebug(const char* text, int16_t n1, int16_t n2, int16_t n3)
{
if (!m_debug)
return;
uint8_t reply[130U];
reply[0U] = MMDVM_FRAME_START;
@ -952,6 +974,9 @@ void CSerialPort::writeDebug(const char* text, int16_t n1, int16_t n2, int16_t n
void CSerialPort::writeDebug(const char* text, int16_t n1, int16_t n2, int16_t n3, int16_t n4)
{
if (!m_debug)
return;
uint8_t reply[130U];
reply[0U] = MMDVM_FRAME_START;
@ -979,31 +1004,3 @@ void CSerialPort::writeDebug(const char* text, int16_t n1, int16_t n2, int16_t n
writeInt(1U, reply, count, true);
}
void CSerialPort::writeAssert(bool cond, const char* text, const char* file, long line)
{
if (cond)
return;
uint8_t reply[200U];
reply[0U] = MMDVM_FRAME_START;
reply[1U] = 0U;
reply[2U] = MMDVM_DEBUG2;
uint8_t count = 3U;
for (uint8_t i = 0U; text[i] != '\0'; i++, count++)
reply[count] = text[i];
reply[count++] = ' ';
for (uint8_t i = 0U; file[i] != '\0'; i++, count++)
reply[count] = file[i];
reply[count++] = (line >> 8) & 0xFF;
reply[count++] = (line >> 0) & 0xFF;
reply[1U] = count;
writeInt(1U, reply, count, true);
}

3
SerialPort.h
Unescape View File

@ -50,12 +50,11 @@ public:
void writeDebug(const char* text, int16_t n1, int16_t n2, int16_t n3);
void writeDebug(const char* text, int16_t n1, int16_t n2, int16_t n3, int16_t n4);
void writeAssert(bool cond, const char* text, const char* file, long line);
private:
uint8_t m_buffer[256U];
uint8_t m_ptr;
uint8_t m_len;
bool m_debug;
void sendACK();
void sendNAK(uint8_t err);

2
YSFRX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
// #define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "YSFRX.h"

2
YSFTX.cpp
Unescape View File

@ -17,8 +17,6 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
// #define WANT_DEBUG
#include "Config.h"
#include "Globals.h"
#include "YSFTX.h"

Write Preview
Loading…
Cancel
Save

Powered by TurnKey Linux.