Andy CA6JAU
9 years ago
commit
135bfa50a2
@ -0,0 +1,149 @@
|
||||
Building instructions:
|
||||
|
||||
1) Raspberry Pi with ZUMSpot Pi:
|
||||
|
||||
* Download latest Raspbian image and install to a micro SD
|
||||
- See: https://www.raspberrypi.org/documentation/installation/installing-images/
|
||||
- Configure your SD before booting. Useful article:
|
||||
https://styxit.com/2017/03/14/headless-raspberry-setup.html
|
||||
- Boot your Raspberry Pi
|
||||
- Run raspi-config and configure according your preferences:
|
||||
sudo raspi-config
|
||||
(at least expand filesystem and change default password. It's a good idea to enable "Wait
|
||||
for Network at Boot" and disable Desktop GUI if you don't plan to use it)
|
||||
|
||||
* Enable serial port /dev/ttyAMA0 (Raspberry Pi 3 or Pi Zero W only):
|
||||
- Edit /boot/cmdline.txt
|
||||
sudo nano /boot/cmdline.txt
|
||||
(remove the text: console=serial0,115200)
|
||||
|
||||
- Disable services:
|
||||
sudo systemctl disable serial-getty@ttyAMA0.service
|
||||
sudo systemctl disable bluetooth.service
|
||||
|
||||
- Edit /boot/config.txt
|
||||
sudo nano /boot/config.txt
|
||||
(add the following lines):
|
||||
enable_uart=1
|
||||
dtoverlay=pi3-disable-bt
|
||||
|
||||
- Reboot the RPi:
|
||||
sudo reboot
|
||||
|
||||
* Enable serial port /dev/ttyAMA0 (Raspberry Pi 2 only):
|
||||
- Edit /boot/cmdline.txt
|
||||
sudo nano /boot/cmdline.txt
|
||||
(remove the text: console=serial0,115200)
|
||||
|
||||
- Disable services:
|
||||
sudo systemctl disable serial-getty@ttyAMA0.service
|
||||
|
||||
- Reboot the RPi:
|
||||
sudo reboot
|
||||
|
||||
* Build de firmware and upload to ZUMSpot:
|
||||
cd ~
|
||||
- Install the necessary software tools:
|
||||
sudo apt-get update
|
||||
sudo apt-get install gcc-arm-none-eabi gdb-arm-none-eabi
|
||||
git clone https://git.code.sf.net/p/stm32flash/code stm32flash
|
||||
cd stm32flash
|
||||
make
|
||||
sudo make install
|
||||
cd ~
|
||||
|
||||
- Download the sources:
|
||||
git clone https://github.com/juribeparada/MMDVM_HS
|
||||
cd MMDVM_HS/
|
||||
git clone https://github.com/juribeparada/STM32F10X_Lib
|
||||
|
||||
- Edit Config.h
|
||||
nano Config.h
|
||||
(and enable):
|
||||
#define PI_HAT_7021_REV_03
|
||||
#define ENABLE_ADF7021
|
||||
#define ADF7021_N_VER (only if your board uses ADF7021N)
|
||||
#define BIDIR_DATA_PIN
|
||||
#define ADF7021_14_7456
|
||||
#define STM32_USART1_HOST
|
||||
#define ENABLE_SCAN_MODE
|
||||
|
||||
- Build the firmware:
|
||||
make
|
||||
|
||||
- Upload the firmware to ZUMSpot Pi board:
|
||||
sudo make zumspot-pi
|
||||
|
||||
* Install MMDVMHost:
|
||||
cd ~
|
||||
git clone https://github.com/g4klx/MMDVMHost/
|
||||
cd MMDVMHost/
|
||||
make
|
||||
|
||||
- Edit MMDVM.ini according your preferences
|
||||
nano MMDVM.ini
|
||||
(use Port=/dev/ttyAMA0 in [Modem])
|
||||
|
||||
- Execute MMDVMHost:
|
||||
./MMDVMHost MMDVM.ini
|
||||
|
||||
2) ZUMSpot USB:
|
||||
|
||||
* Windows:
|
||||
coming soon...
|
||||
|
||||
* Linux:
|
||||
coming soon...
|
||||
|
||||
3) Makefile options:
|
||||
|
||||
make clean: delete all objects files *.o, for starting a new firmware building.
|
||||
|
||||
make: it builds a standard firmware (without USB bootloader support).
|
||||
|
||||
make bl: it builds a firmware with USB bootloader support.
|
||||
|
||||
make zumspot-pi: upload the firmware to a ZUMSpot Pi version (using internal RPi serial port)
|
||||
|
||||
make dfu [devser=/dev/ttyXXX]: upload firmware using USB bootloader. "devser" is optional,
|
||||
and it corresponds to the USB serial port device name. This option permits to perform a reset
|
||||
to enter to booloader mode (DFU). If you don't use "devser", you have to press the reset button
|
||||
of the ZUMSpot just before using this command.
|
||||
|
||||
make serial devser=/dev/ttyXXX: upload standard firmware using serial port bootloader method.
|
||||
|
||||
make serial-bl devser=/dev/ttyXXX: upload firmware with USB bootloader support using serial
|
||||
port bootloader method.
|
||||
|
||||
make stlink: upload standard firmware using ST-Link interface.
|
||||
|
||||
make stlink-bl: upload firmware with USB bootloader support using ST-Link interface.
|
||||
|
||||
make ocd: upload standard firmware using ST-Link interface. This method uses a local
|
||||
openocd installation.
|
||||
|
||||
make ocd-bl: upload firmware with USB bootloader support using ST-Link interface. This
|
||||
method uses a local openocd installation.
|
||||
|
||||
* Common Makefile commands:
|
||||
- Serial programming (first programming, transfer the USB bootloader):
|
||||
make clean
|
||||
make bl
|
||||
sudo make serial-bl devser=/dev/ttyUSB0
|
||||
|
||||
- USB programming (you have already transfered the USB bootloader):
|
||||
make clean
|
||||
make bl
|
||||
sudo make dfu (reset ZUMSpot before) or
|
||||
sudo make dfu devser=/dev/ttyACM0 (/dev/ttyACM0 is the device name of ZUMSpot USB under
|
||||
Raspbian)
|
||||
|
||||
- ZUMSpot Pi (no USB support needed):
|
||||
make clean
|
||||
make
|
||||
sudo make zumspot-pi
|
||||
|
||||
4) Config.h options:
|
||||
|
||||
coming soon...
|
||||
|
||||
Loading…
Reference in new issue