@ -78,7 +78,7 @@ After Home Assistant starts, Kitchen Show waits three minutes for the initial st
| [](maintenance_log.yaml) | Webhook-based water softener salt maintenance logging with idempotent event handling, Activity Feed logging, parser-safe refill cadence history, and dashboard-ready template sensors. [](https://youtu.be/_OqTv9i-jAs) [](https://www.vcloudinfo.com/2026/07/home-assistant-water-softener-salt-automation.html) | `automation.maintenance_log_joanna_webhook_ingest`, `sensor.water_softener_salt_average_days_between_refills`, `sensor.water_softener_salt_refill_count`, `sensor.water_softener_salt_total_added` |
| [](kiosk_tablet.yaml) | Shares Garage-then-Front-Door priority plus reusable Bedroom header/alert state while keeping each display purpose-built. The Garage view now remains active for three minutes after both doors close before either kiosk returns to its default dashboard. Bedroom retains Fully wake/drift recovery and SleepIQ screen behavior around a clock-free night-watch display; Kitchen retains its clock/forecast, rotating household context, native camera overlays, Kiosk Satellite idle dimming, and an event-driven household policy that corrects master volume to 13% at 08:00 and startup, and invokes the Dim screensaver while `group.bed` is on or the family is away. Nearby rain or lightning starts one five-minute NOAA radar takeover while the sun is above the horizon; afterward, the rotating Storms Approaching banner can replay the latest 20-minute loop while the event remains active. Actionable banner slides reuse one transient detail timer for NWS instructions, the front-door package view, a person-centered family map, open-entry details, Phyn water status with a confirmed valve-restore action, and hot-water recovery status. Sunset restores the ambient wall immediately. True idle panel-off remains disabled on the Crown LineageOS device until it has a reliable motion-wake input. Fully availability/page/app/power checks plus Kitchen connectivity, current-page, and screenshot freshness keep the Systems Kiosks tab truthful; a reachable Kitchen display remains online while stale session timestamps remain visible only in the telemetry panel. Available Kitchen updates remain advisory telemetry, while stable attention attributes preserve useful outage transitions without recording every heartbeat. At 07:00, Home Assistant requests the pending signed installer and waits two minutes for staging before dispatching Joanna to finish the Android confirmation and verify the Kitchen Show returns to its dashboard; an unsuccessful installation is retried at 07:00 the following day until the update entity confirms success. [](https://youtu.be/ChgEu0IDWzc) | `binary_sensor.kiosk_garage_camera_active`, `sensor.kiosk_active_camera_view`, `sensor.bedroom_kiosk_header`, `sensor.kiosk_household_alert`, `binary_sensor.kiosk_rain_radar_weather_event`, `binary_sensor.kiosk_rain_radar_active`, `timer.kitchen_kiosk_radar_display`, `input_text.kitchen_kiosk_detail_view`, `timer.kitchen_kiosk_detail_display`, `script.kitchen_kiosk_show_event`, `script.kitchen_kiosk_show_detail`, `script.kitchen_kiosk_restore_phyn_water`, `binary_sensor.bedroom_kiosk_needs_attention`, `binary_sensor.kiosk_devices_need_attention`, `sensor.alarm_panel_1_current_page`, `button.alarm_panel_1_load_start_url`, `binary_sensor.kitchen_kiosk_should_be_on`, `number.kitchen_show_volume_2`, `light.kitchen_show_screen_2`, `button.kitchen_show_postpone_screensaver_2`, `button.kitchen_show_take_screenshot_2`, `sensor.kitchen_show_active_camera_view_2`, `automation.kitchen_kiosk_satellite_update_joanna_dispatch` |
| [](powerwall.yaml) | Track Tesla Powerwall grid status, keep a restart-safe outage anchor, publish monitor-only staged resilience recommendations from Home Assistant, handle immediate household load shedding, and alert if the Powerwall stays low after grid power returns. [](https://youtu.be/hR_0lFEE2bA) [](https://www.vcloudinfo.com/2026/06/tesla-powerwall-home-assistant-watchdog.html) | `binary_sensor.powerwall_grid_status`, `sensor.powerwall_*`, `input_datetime.power_resilience_outage_started`, `sensor.power_resilience_recommended_stage`, `script.notify_live_activity`, `repairs.create` |
| [](tesla_model_y.yaml) | Remind the garage and parents to plug in the Model Y after a low-battery arrival, alert both parents when a reported tire drops below 38.5 PSI, and issue one critical parents push plus a garage announcement when persisted JuiceBox current reaches 20 A. A restoring latch prevents repeat current alarms. Five continuous minutes without a running and healthy JuicePassProxy creates a Systems problem and tells the garage and parents not to charge; recovery is also reported to the parents. Plug-in alerts snooze for 24 hours; tire alerts and Joanna's morning-briefing action item share 1-day and 3-day snoozes. [](https://youtu.be/hDNyZfTfTtE) [](https://www.vcloudinfo.com/2026/09/home-assistant-tesla-tire-pressure-alerts.html) | `sensor.spaceship_battery_level`, `sensor.tire_pressure_*`, `sensor.juicebox_current_last_known`, `sensor.juicepassproxy_state`, `sensor.juicepassproxy_health`, `binary_sensor.juicepassproxy_monitoring_degraded`, `switch.spaceship_charge`, `cover.large_garage_door`, `input_boolean.tesla_high_charge_rate_alert_active`, `input_datetime.tesla_model_y_*`, `input_datetime.tesla_tire_pressure_snooze_until`, `notify.alexa_media_garage`, `script.notify_engine` |
| [](tesla_model_y.yaml) | Remind the garage and parents to plug in the Model Y after a low-battery arrival, alert both parents when a reported tire drops below 38.5 PSI, and issue one critical parents push plus a garage announcement when persisted JuiceBox current reaches 20 A. A restoring latch prevents repeat current alarms. A missing JuiceBox MQTT heartbeat dispatches Joanna after three minutes and raises a critical Systems alert after five minutes if reports remain absent; fresh reports clear the alert. Portainer status remains diagnostic. Plug-in alerts snooze for 24 hours; tire alerts and Joanna's morning-briefing action item share 1-day and 3-day snoozes. [](https://youtu.be/hDNyZfTfTtE) [](https://www.vcloudinfo.com/2026/09/home-assistant-tesla-tire-pressure-alerts.html) | `sensor.spaceship_battery_level`, `sensor.tire_pressure_*`, `sensor.juicebox_current_last_known`, `sensor.juicepassproxy_mqtt_heartbeat`, `binary_sensor.juicepassproxy_investigation_needed`, `binary_sensor.juicepassproxy_monitoring_degraded`, `switch.spaceship_charge`, `cover.large_garage_door`, `input_boolean.tesla_high_charge_rate_alert_active`, `input_datetime.tesla_model_y_*`, `input_datetime.tesla_tire_pressure_snooze_until`, `notify.alexa_media_garage`, `script.notify_engine`, `script.joanna_dispatch` |
| [](hass_agent_homepc.yaml) | Mirrors PC lock/unlock state to the office lamp and wakes `CARLO-HOMEPC` on workday morning bed exits. | `sensor.carlo_homepc_carlo_homepc_sessionstate`, `button.carlo_home`, `switch.office_lamp_switch` |
| [](sleepiq.yaml) | Sleep Number presence/snore automations plus a zero-filtered 14-day score summary; Overview Health keeps the detailed scores, vitals, pressure, and bed controls. | `group.bed`, `binary_sensor.sleepnumber_carlo_carlo_is_in_bed`, `binary_sensor.sleepnumber_carlo_stacey_is_in_bed`, `sensor.sleepnumber_carlo_carlo_sleep_score`, `sensor.sleepnumber_carlo_stacey_sleep_score`, `sensor.sleep_score_14_day_averages`, `number.sleepnumber_carlo_carlo_firmness`, `select.sleepnumber_carlo_foundation_preset_right` |
@ -116,7 +116,7 @@ When a package has a dedicated blog post or video, I link it right inside the YA
| [](garadget.yaml) | Garage arrival hub with auto-open guardrails, entry prompts, nighttime reminders, camera context, and the older MQTT/token setup notes. | [](https://youtu.be/wFO0H5zgnzk) · [](https://www.vcloudinfo.com/2026/05/home-assistant-garage-automations-arrival-alerts-tesla.html) · [](https://www.vcloudinfo.com/2019/03/how-to-add-garadget-to-home-assistant.html) · [](https://www.vcloudinfo.com/2020/05/fixing-garadget-in-home-assistant.html) |
| [](../automation/garage_entry_light.yaml) | Simple door-open and door-closed hallway lighting pattern from the garage walkthrough. | [](https://youtu.be/wFO0H5zgnzk) · [](https://www.vcloudinfo.com/2026/05/home-assistant-garage-automations-arrival-alerts-tesla.html) |
| [](kiosk_tablet.yaml) + [Bedroom dashboard](../dashboards/bedroom) + [Kiosk Satellite preview](../dashboards/kiosk_satellite_staging) | Shared event priority with purpose-built display surfaces: clock-free Bedroom night-watch context and cameras through Fully, plus Kitchen clock/forecast, reminders, native camera overlays, motion-aware dimming, and household-aware screen power through Kiosk Satellite. | [](https://youtu.be/ChgEu0IDWzc) · [](https://www.vcloudinfo.com/2017/08/project-update-visualization-of-home.html) |
| [](tesla_model_y.yaml) | Tesla Fleet tire-pressure alerts with a shared briefing snooze, garage-close arrival signals for low-battery plug-in reminders, a JuiceBox-only 20 A current alarm, and a five-minute JuicePassProxy monitoring outage alert. | [](https://youtu.be/hDNyZfTfTtE) · [](https://www.vcloudinfo.com/2026/09/home-assistant-tesla-tire-pressure-alerts.html) · [](https://youtu.be/wFO0H5zgnzk) · [](https://www.vcloudinfo.com/2026/05/home-assistant-garage-automations-arrival-alerts-tesla.html) |
| [](tesla_model_y.yaml) | Tesla Fleet tire-pressure alerts with a shared briefing snooze, garage-close arrival signals for low-battery plug-in reminders, a JuiceBox-only 20 A current alarm, and a three-minute Joanna investigation followed by a five-minute critical alert for missing JuiceBox MQTT reports, with automatic clearing when reports resume. | [](https://youtu.be/hDNyZfTfTtE) · [](https://www.vcloudinfo.com/2026/09/home-assistant-tesla-tire-pressure-alerts.html) · [](https://youtu.be/wFO0H5zgnzk) · [](https://www.vcloudinfo.com/2026/05/home-assistant-garage-automations-arrival-alerts-tesla.html) |
| [](llmvision.yaml) | LLM Vision package reminder flow that turns a front-door camera event into a stored package-present state and phone alert. | [](https://youtu.be/nAhCezFetvI) |
| [](maintenance_log.yaml) + [](../dashboards/infrastructure/views/09_salt_trends.yaml) + [](../dashboards/infrastructure/partials/home_water_sections.yaml) | Water softener salt maintenance flow with a reusable webhook, duplicate protection, helper-backed history, template sensors, and Salt Trends dashboard views. | [](https://youtu.be/_OqTv9i-jAs) · [](https://www.vcloudinfo.com/2026/07/home-assistant-water-softener-salt-automation.html) · [Issue #1816](https://github.com/CCOSTAN/Home-AssistantConfig/issues/1816) |
Carlo Costanzo
2 months ago