# This minimal config file uses defaults for everything apart from OBP/FBP and
# HBP config. This is usually a sensible choice.

# Servers should normally use the accepted defaults unless there is a specific
# reason to change them.

[GLOBAL]
# If you join the FreeDMR network, add your server ID here.
SERVER_ID: 0

[REPORTS]

[LOGGER]

[ALIASES]

[ALLSTAR]

# Example OpenBridge Protocol (OBP) or FreeDMR Bridge Protocol (FBP)
# configuration. If you join FreeDMR, you will be given a config like this to
# paste in.
[OBP-TEST]
MODE: OPENBRIDGE
ENABLED: False
IP:
PORT: 62044
# The ID which you expect to see sent from the other end of the link.
NETWORK_ID: 1
PASSPHRASE: mypass
TARGET_IP:
TARGET_PORT: 62044
USE_ACL: True
SUB_ACL: DENY:1
TGID_ACL: PERMIT:ALL
# Should usually be true when using Docker or NAT.
RELAX_CHECKS: True
# True for FBP, False for OBP.
ENHANCED_OBP: True
# PROTO_VER should be 5 for FreeDMR servers using FBP.
# Use 1 for other servers using OBP.
PROTO_VER: 5

# Repeater/hotspot connections via HomeBrew Protocol (HBP).
[SYSTEM]
MODE: MASTER
ENABLED: True
REPEAT: True
MAX_PEERS: 1
EXPORT_AMBE: False
IP: 127.0.0.1
PORT: 54000
PASSPHRASE:
GROUP_HANGTIME: 5
USE_ACL: True
REG_ACL: DENY:1
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL
DEFAULT_UA_TIMER: 10
SINGLE_MODE: True
VOICE_IDENT: True
DIAL_A_TG: True
DYNAMIC_TG_ROUTING: True
NETWORK_DIRECT_DIAL_SLOT: 0
TS1_STATIC:
TS2_STATIC:
DEFAULT_DIAL_TS1: 0
DEFAULT_DIAL_TS2: 0
DEFAULT_REFLECTOR: 0
ANNOUNCEMENT_LANGUAGE: en_GB
GENERATOR: 100
ALLOW_UNREG_ID: False
PROXY_CONTROL: True
OVERRIDE_IDENT_TG:

# Echo (Loro / Parrot) server.
[ECHO]
MODE: PEER
ENABLED: True
LOOSE: False
EXPORT_AMBE: False
IP: 127.0.0.1
PORT: 54916
MASTER_IP: 127.0.0.1
MASTER_PORT: 54915
PASSPHRASE: passw0rd
CALLSIGN: M0XFD
RADIO_ID: 2340210
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 1
LATITUDE: 00.0000
LONGITUDE: 000.0000
HEIGHT: 0
LOCATION: Earth
DESCRIPTION: ECHO
URL: www.freedmr.uk
SOFTWARE_ID: 20170620
PACKAGE_ID: MMDVM_FreeDMR
GROUP_HANGTIME: 5
OPTIONS:
USE_ACL: True
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL
ANNOUNCEMENT_LANGUAGE: en_GB