# D-Star Repeater configuration file
# Format: MMDVMHost-style INI, [Section] headers, Key=Value pairs, # comments
# Copy this file to /etc/dstarrepeater/dstarrepeater.ini and edit for your installation.

[General]
Callsign=GB3IN  C
Gateway=
# Operating mode: 0=Duplex, 1=Simplex, 2=Gateway, 3=TXOnly, 4=RXOnly, 5=TX+RX
Mode=0
# Acknowledgement type: 0=None, 1=BER, 2=Status
Ack=1
Restriction=0
RPT1Validation=1
DTMFBlanking=1
ErrorReply=1

[Log]
# Logging levels: 0=None, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
FilePath=/var/log
FileLevel=2
DisplayLevel=2
MQTTLevel=2

[Paths]
Data=/usr/share/dstarrepeater
Audio=/var/log

[Network]
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalAddress=127.0.0.1
LocalPort=20011
Name=

[Modem]
# Type: DVAP, GMSK Modem, DV-RPTR V1, DV-RPTR V2, DV-RPTR V3, DVMEGA, MMDVM,
#       Sound Card, Split, Icom Access Point/Terminal Mode
Type=DVAP

[Times]
# Transmission timeout in seconds
Timeout=180
# Acknowledgement delay in milliseconds
AckTime=500

[Beacon]
# Beacon interval in seconds (0 to disable)
Time=600
Text=D-Star Repeater
# 0=Text only, 1=Voice
Voice=0
# Language: 0=English UK, 1=Deutsch, 2=Dansk, 3=Francais, 4=Italiano, 5=Polski,
#           6=Espanol, 7=Svenska, 8=Nederlands, 9=English US, 10=Norsk
Language=0

[Announcement]
Enabled=0
Time=500
RecordRPT1=
RecordRPT2=
DeleteRPT1=
DeleteRPT2=

[Control]
Enabled=0
RPT1=
RPT2=
Shutdown=
Startup=
Status1=
Status2=
Status3=
Status4=
Status5=
Command1=
Command1Line=
Command2=
Command2Line=
Command3=
Command3Line=
Command4=
Command4Line=
Command5=
Command5Line=
Command6=
Command6Line=
Output1=
Output2=
Output3=
Output4=

[Controller]
# Type: (empty for none), GPIO, UDRC, Velleman K8055 - 0, URI USB - 1,
#       Serial - /dev/ttyUSB0, Arduino - /dev/ttyUSB0
Type=
# Serial configuration bitmask
SerialConfig=1
PTTInvert=0
ActiveHangTime=0

[Outputs]
Output1=0
Output2=0
Output3=0
Output4=0

[Frame Logging]
Enabled=0

[Whitelist]
# Full path to whitelist file; leave commented out if not used
# File=rptr_whitelist.dat

[Blacklist]
# Full path to blacklist file; leave commented out if not used
# File=rptr_blacklist.dat

[Greylist]
# Full path to greylist file; leave commented out if not used
# File=greylist.dat

[DVAP]
Port=
# Frequency in Hz
Frequency=145500000
# Power in dBm
Power=10
# Squelch threshold in dBm
Squelch=-100

[GMSK]
# Interface type: 0=LibUSB, 1=Serial
InterfaceType=0
# USB address in decimal (0x0300 = 768)
Address=768

[DV-RPTR V1]
Port=
RXInvert=0
TXInvert=0
# Channel: 0=A, 1=B
Channel=0
ModLevel=20
TXDelay=150

[DV-RPTR V2]
# Connection type: 0=USB, 1=Network
Connection=0
USBPort=
Address=127.0.0.1
Port=0
TXInvert=0
ModLevel=20
TXDelay=150

[DV-RPTR V3]
# Connection type: 0=USB, 1=Network
Connection=0
USBPort=
Address=127.0.0.1
Port=0
TXInvert=0
ModLevel=20
TXDelay=150

[DVMEGA]
Port=
# Variant: 0=Modem, 1=Radio 2M, 2=Radio 70cm, 3=Radio 2M/70cm
Variant=0
RXInvert=0
TXInvert=0
TXDelay=150
# Frequencies in Hz
RXFrequency=145500000
TXFrequency=145500000
# Power level 0-100
Power=100

[MMDVM]
Port=
RXInvert=0
TXInvert=0
PTTInvert=0
# TX delay in milliseconds
TXDelay=50
# Levels 0-100
RXLevel=100
TXLevel=100

[Sound Card]
RXDevice=
TXDevice=
RXInvert=0
TXInvert=0
RXLevel=1.0
TXLevel=1.0
TXDelay=150
TXTail=50

[Split]
LocalAddress=
LocalPort=0
# Timeout in milliseconds
Timeout=0
# TX/RX names (TXName0-TXName4, RXName0-RXName24)
# TXName0=
# RXName0=

[Icom]
Port=

[MQTT]
Host=127.0.0.1
Port=1883
# Auth: 0=None, 1=Username/Password
Auth=0
Username=
Password=
# Keepalive interval in seconds
Keepalive=60
Name=dstar-repeater