You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
51 lines
1.5 KiB
51 lines
1.5 KiB
/*
|
|
Blink
|
|
Turns on an LED on for one second, then off for one second, repeatedly.
|
|
|
|
Most Arduinos have an on-board LED you can control. On the Uno and
|
|
Leonardo, it is attached to digital pin 13. If you're unsure what
|
|
pin the on-board LED is connected to on your Arduino model, check
|
|
the documentation at http://arduino.cc
|
|
|
|
This example code is in the public domain.
|
|
|
|
modified 8 May 2014
|
|
by Scott Fitzgerald
|
|
|
|
Modified by Roger Clark. www.rogerclark.net for Maple mini 25th April 2015 , where the LED is on PC13
|
|
|
|
Added CubeSatSim Payload tests by Alan Johnston, KU2Y
|
|
|
|
*/
|
|
|
|
int sensorValue = 0;
|
|
|
|
// the setup function runs once when you press reset or power the board
|
|
void setup() {
|
|
// initialize digital pin PB1 as an output.
|
|
pinMode(PB9, OUTPUT);
|
|
pinMode(PB8, OUTPUT);
|
|
pinMode(PA0, INPUT_ANALOG);
|
|
pinMode(PA1, INPUT_ANALOG);
|
|
pinMode(PA2, INPUT_ANALOG);
|
|
|
|
Serial.begin(9600);
|
|
}
|
|
|
|
// the loop function runs over and over again forever
|
|
void loop() {
|
|
digitalWrite(PB9, HIGH); // turn the LED on (HIGH is the voltage level)
|
|
digitalWrite(PB8, LOW); // turn the LED on (HIGH is the voltage level)
|
|
delay(1000); // wait for a second
|
|
digitalWrite(PB9, LOW); // turn the LED off by making the voltage LOW
|
|
digitalWrite(PB8, HIGH); // turn the LED on (HIGH is the voltage level)
|
|
delay(1000); // wait for a second
|
|
|
|
sensorValue = analogRead(PA0);
|
|
Serial.println(sensorValue);
|
|
sensorValue = analogRead(PA1);
|
|
Serial.println(sensorValue);
|
|
sensorValue = analogRead(PA2);
|
|
Serial.println(sensorValue);
|
|
}
|