CubeSatSim, the AMSAT CubeSat Simulator
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Go to file
alanbjohnston b7fc7ef15a
Delete radio.cw
7 years ago
afsk moved firstTime to only avoid sleep(3) not writing values 7 years ago
arduino
…
ax5043
…
cw
…
documentation
…
groundstation
…
kicad
…
libs
…
openwrt
…
python
…
sdr
…
spacecraft changed back 7 years ago
spreadsheet
…
systemd
…
wav
…
.gitignore
…
Makefile added -lm 7 years ago
README.md added requirements of git, wiringpi, and libcurl 7 years ago
afsk.wav
…
cw.wav
…
demo.sh auto demo off, fox-demo.sh to be used 7 years ago
fox-demo.sh auto demo off, fox-demo.sh to be used 7 years ago
gpl.txt
…
radio.cw.once
…

README.md

CubeSatSim

The CubeSat Simulator https://github.com/alanbjohnston/CubeSatSim/wiki is a low cost satellite emulator that run on solar panels and batteries, transmits UHF radio telemetry, has a 3D printed frame, and can be extended by additional sensors and modules. This project is sponsored by the not-for-profit Radio Amateur Satellite Corporation, AMSAT®.

Requires:

  • wiringpi
  • libcurl4-openssl-dev
  • git

See the Wiki Software Install page for more details: https://github.com/alanbjohnston/CubeSatSim/wiki/Software-Install. To build and run the software on a Raspberry Pi 3B, 3B+, or Pi Zero W:

git clone http://github.com/alanbjohnston/CubeSatSim.git

cd CubeSatSim

Edit the afsk/main.c file to set your amateur radio callsign, then

make rebuild

To hear AFSK telemetry (X.25 data), your radio or SDR to 434.9 MHz FM, and you should receive telemetry from the CubeSat Sim:

./radioafsk

This code uses the Brandenburg Tech Digital Transceiver, based on DigitalTxRxRP https://brandenburgtech.wordpress.com/ If you don't have the SPI Interface enabled and the board plugged in, you will get an error.

This repository contains:

  • afsk - Code that sends telemetry in 1k2 AFSK X.25 format
  • arduino - Sample Arduino sketches to show how payload sensors can be interfaced to CubeSat Simulator
  • ax5043 - Source for a library of functions to communicate with the AX5043 and configure the AX5043.
  • cw - Code that sends telemetry in CW (Morse code) using AO-7 format
  • libs - External libraries
  • python - Python code for reading I2C sensors for current and temperature
  • spreadsheet - Spreadsheets for decoding and analyzing the Simulator telemetry (see https://github.com/alanbjohnston/CubeSatSim/wiki/Decoding-Telemetry for details)
  • wav - Wave audio files of CW or AFSK telemetry for listening or transmitting usng a CubeSat Simulator Lite
  • demo.sh - a shell script to run the Simulator on boot using systemd (see https://github.com/alanbjohnston/CubeSatSim/wiki/Software-Install#autoboot-configuration for how to configure the Pi)

See the Wiki for more details https://github.com/alanbjohnston/CubeSatSim/wiki

Powered by TurnKey Linux.